pppd_compat: add Framed-Interface-Id attribute support in radattr

2024-08-31T23:22:59+00:00

Add PACKETS_SENT and PACKETS_RCVD to the pppd-compat environment.

2022-11-01T09:08:06+00:00

Use 64-bit interface statistics rather than doing custom 32-bit overflow handling.

2022-11-01T08:51:34+00:00

When a link has a relatively high throughput, the 32-bit packet and byte counters could overflow multiple times between accounting runs. To accommodate this limitation, directly use 64-bit interface statistics. This also gets rid of the internal giga-word counters.

Fixed some errors found by valgrind and pvs-studio (#11)

2021-03-20T14:14:59+00:00

* Fix errors found by valgrind ==12312== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s) ==12312== at 0x486CCF0: sendmsg (in /lib/libpthread-2.22.so) ==12312== by 0x12F57F: rtnl_talk (libnetlink.c:316) ==12312== by 0x132DA3: genl_resolve_mcg (genl.c:52) ==12312== by 0x484E1CB: init (vlan_mon.c:528) ==12312== by 0x484CDC0: vlan_mon_register_proto (vlan_mon.c:48) ==12312== by 0x510B763: load_vlan_mon (pppoe.c:1914) ==12312== by 0x510BFF2: load_config (pppoe.c:2064) ==12312== by 0x510C22A: pppoe_init (pppoe.c:2108) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) ==12312== Address 0xbedacdd8 is on thread 1's stack ==12312== in frame #2, created by genl_resolve_mcg (genl.c:23) ==12312== 15 bytes in 1 blocks are definitely lost in loss record 352 of 836 ==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so) ==12312== by 0x12C30C: init (telnet.c:769) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) ==12312== ==12312== 15 bytes in 1 blocks are definitely lost in loss record 353 of 836 ==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so) ==12312== by 0x12D60A: init (tcp.c:392) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) * Fix another warnings by cppcheck [accel-pppd/ctrl/ipoe/arp.c:256]: (error) Uninitialized variable: n [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/pppoe.c:738]: (warning) Possible null pointer dereference [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/libnetlink/libnetlink.c:515]: (warning) Possible null pointer dereference [accel-pppd/ppp/ipv6cp_opt_intfid.c:185]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. * Suppress compiler warnings * Fix locking errors /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 279 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 279, 249. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 333 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 333, 315. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 422 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 422, 372. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 488 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 488, 468. /opt/pvs/accel-ppp/accel-pppd/triton/mempool.c 119 warn V1020 The function exited without calling the 'pthread_spin_unlock' function. Check lines: 119, 116. * Fix array len errors /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 75 warn V557 Array underrun is possible. The value of 'len - 1' index could reach -1. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 76 warn V557 Array underrun is possible. The value of '-- len' index could reach -1. * Fix possible memory leaks /opt/pvs/accel-ppp/accel-pppd/radius/radius.c 936 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible. /opt/pvs/accel-ppp/accel-pppd/radius/serv.c 622 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 144 err V773 The function was exited without releasing the 'raw' pointer. A memory leak is possible. * Fix unsafe code /opt/pvs/accel-ppp/accel-pppd/cli/tcp.c 364 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 338, 364. /opt/pvs/accel-ppp/accel-pppd/cli/telnet.c 701 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 675, 701. /opt/pvs/accel-ppp/accel-pppd/extra/ippool.c 241 err V614 Potentially uninitialized pointer 'pos' used. /opt/pvs/accel-ppp/accel-pppd/radius/dict.c 165 err V614 Uninitialized pointer 'parent_items' used. * Remove duplicate code /opt/pvs/accel-ppp/accel-pppd/radius/serv.c 202 warn V547 Expression 'ts.tv_sec < req->serv->fail_time' is always false. * Fix treating signed bool variables as unsigned * Add nullptr checking /opt/pvs/accel-ppp/accel-pppd/ipv6/dhcpv6.c 886 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 886, 890. /opt/pvs/accel-ppp/accel-pppd/ipv6/nd.c 479 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 479, 483. /opt/pvs/accel-ppp/accel-pppd/radius/auth.c 152 err V595 The 'rpd->auth_ctx' pointer was utilized before it was verified against nullptr. Check lines: 152, 154. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 114 err V595 The 'cur_sect' pointer was utilized before it was verified against nullptr. Check lines: 114, 117. * Add logging of exit conditions * Clarify calculation [accel-pppd/ppp/ccp_mppe.c:281]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:282]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:283]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:284]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:285]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:286]: (style) Clarify calculation precedence for '&' and '?'. [drivers/ipoe/ipoe.c:307]: (style) Clarify calculation precedence for '&' and '?'. * Fix void calculations [accel-pppd/ctrl/pppoe/disc.c:211]: (portability) 'pkt' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ctrl/pptp/pptp.c:150]: (portability) 'buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/acct.c:37]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/auth.c:35]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/auth.c:79]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:43]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:47]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:57]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:65]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:97]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/serv.c:364]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:115]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:122]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:276]: (portability) 'ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. * Fix void part 2 [accel-pppd/ipv6/dhcpv6.c:844]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ipv6/nd.c:199]: (portability) '(void*)dnsslinfo' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ipv6/nd.c:432]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. * Fix null pointer dereference [accel-pppd/ctrl/ipoe/ipoe.c:2048]: (warning) Possible null pointer dereference: eth [accel-pppd/ctrl/ipoe/ipoe.c:2049]: (warning) Possible null pointer dereference: iph * Remove redundant check /opt/pvs/accel-ppp/accel-pppd/ctrl/l2tp/packet.c 656 warn V547 Expression 'attr->length <= 16' is always false. * PR fixes * PR fixes 2

pppd_compat: write human readable values of IPv6 address to radattr file

2019-05-15T14:57:26+00:00

pppd_compat: fix handling of fork() failures

2018-11-03T06:04:40+00:00

When accel-ppp is under stress (for example because of massive disconnections) it may enter a state where no session could be created or destroyed anymore. This happens when at least one of the pppd_compat fork() fail. In this case, the error code path doesn't unlock the sigchld handler, which prevents it from running the completion callbacks of running scripts. If the "fork-limit" option is used, failure to call the completion callback will prevent other scripts from running. This will block setting up and tearing down sessions, as those will wait indefinitely for their pppd_compat scripts to run. Therefore, we have to unlock the sigchld handler when fork() fails. We also need to call fork_queue_wakeup(), because the previous check_fork_limit() call already took one reference in the fork limit. Finally, ev_ses_pre_up() is a bit special because it has to tear the session down if the ip-pre-up script failed. Therefore it also has to call ap_session_terminate() upon fork() failures. Signed-off-by: Guillaume Nault

ipv6: fix IPv6 processing of sessions that only have only a link-local address

2018-10-23T06:44:45+00:00

Several modules assume that if ses->ipv6 is set, then ses->ipv6->addr_list contains at least one element. But this is not true if ipv6 was allocated by the pseudo ipdb backend of ipv6cp (ipv6cp_opt_intfid.c). That is, if the PPP session only has an automatic link-local address. This leads modules like pppd-compat and dhcpv6 to access invalid memory when trying to retrieve the IPv6 address of a PPP session. Signed-off-by: Guillaume Nault

pppd_compat: fix indentation in ev_radius_coa()

2018-06-24T17:19:10+00:00

Missing tab was misleading. Signed-off-by: Guillaume Nault

pppd_compat: run scripts in the PPP device netns

2018-06-24T17:19:08+00:00

If the PPP device is set up into a specific network namespace, all the configuration that goes with it belongs to this same netns. Therefore, we need to run the up/down scripts in that namespace too. Signed-off-by: Guillaume Nault

pppd_compat: fix argv[0] when calling ip-pre-up

2018-06-24T17:19:05+00:00

The first argument passed to the ip-pre-up script, was mistakenly set to the value of ip-up. Signed-off-by: Guillaume Nault

accel-ppp.git/accel-pppd/extra/pppd_compat.c, branch stable