accel-ppp.git/accel-pppd/radius/serv.c, branch sstp-alloc-invariant

radius: fix request slot leak when queued request wakeup fails

2026-07-06T09:45:36+00:00

req_wakeup() ignored the return value of req->send(req, 1). When a request dequeued from the req-limit queue failed at socket setup (__rad_req_send returns -2, e.g. under ephemeral port exhaustion or a routing error), the server's req_cnt slot taken in rad_server_req_exit() was never released and the request was orphaned with no callback and no timer. Leaked slots accumulate until req_cnt permanently saturates req-limit, after which every request queues forever and the server is effectively dead until restart. Handle -2 the same way rad_server_req_enter() does: release the slot, mark the server failed and drive the request through the regular failover path so it either retries on another server or reports the failure to its owner. Signed-off-by: Denys Fedoryshchenko

radius: update server secret on config reload

2026-06-05T19:42:06+00:00

On EV_CONFIG_RELOAD, __add_server() re-parses each server line into a fresh rad_server_t and, when it matches an existing server by addr/auth_port/acct_port, copied over only the timeout/limit/bind fields before freeing the new struct. The freshly parsed secret was discarded, so editing a shared secret and reloading had no effect until a full restart. The strdup'd secret on the freed struct was also leaked on every matched reload. Adopt the new secret into the existing server (freeing the old one) so secret changes take effect on reload. New requests read req->serv->secret directly, so they pick up the update immediately. This covers both the modern "server=" path and the legacy auth-server/acct-server path, which both funnel through __add_server().

radius: encapsulate server statistics counters

2026-05-04T00:09:49+00:00

Group the per-server RADIUS statistics in struct rad_server_stat_t under rad_server_t.stat instead of keeping auth, accounting, interim, and failure counters as separate fields on rad_server_t. This keeps the statistics state collected behind one ownership boundary and makes the relationship between the total counters and their rolling accumulators explicit. Route counter updates through rad_server_stat_*() helpers. Auth, accounting, interim, and server-failure paths no longer open-code individual counter increments and accumulator updates; the update policy now lives in serv.c with the rest of the RADIUS server accounting logic. Make the CLI show-stat path render from a local snapshot. The displayed totals are loaded with relaxed atomic reads, the rolling one-minute/five-minute values are collected in one place, and the in-flight request/queue counters are copied under the server lock before printing. Future changes to synchronization or accumulator storage can stay inside the snapshot/update helpers instead of leaking into the CLI formatting code. Signed-off-by: Denys Fedoryshchenko

radius: Fix use after free and more

2026-02-18T17:35:13+00:00

Situation is a bit complex. Even one problem we fix easily, such as saving server as variable, rad_req_free might free server in theory, and s will be invalid. This is a bit of rewrite, but proper fix. Fixes problem in 2 functions. Signed-off-by: Denys Fedoryshchenko

crypto: Removed internal tomcat crypto.

2025-12-10T17:16:42+00:00

Signed-off-by: Andrii Melnychenko

Adding support to Radius IPV6 address

2023-11-30T11:54:54+00:00

This change enables ipv6 connections between accel-ppp and radius server

These changes are in response to PR comments

2021-12-28T12:35:08+00:00

Added VRF support for radius request and DM/CoA server.

2021-12-28T09:50:44+00:00

New configuration format: [radius] server=address,secret[,auth-port=1812][,acct-port=1813][,vrf=VRF_NAME][,req-limit=0][,fail-timeout=0,max-fail=0,][,weight=1][,backup] dae-server=x.x.x.x:port,secret[,vrf=VRF_NAME] By default, VRF name is undefined.

Fixed some errors found by valgrind and pvs-studio (#11)

2021-03-20T14:14:59+00:00

* Fix errors found by valgrind ==12312== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s) ==12312== at 0x486CCF0: sendmsg (in /lib/libpthread-2.22.so) ==12312== by 0x12F57F: rtnl_talk (libnetlink.c:316) ==12312== by 0x132DA3: genl_resolve_mcg (genl.c:52) ==12312== by 0x484E1CB: init (vlan_mon.c:528) ==12312== by 0x484CDC0: vlan_mon_register_proto (vlan_mon.c:48) ==12312== by 0x510B763: load_vlan_mon (pppoe.c:1914) ==12312== by 0x510BFF2: load_config (pppoe.c:2064) ==12312== by 0x510C22A: pppoe_init (pppoe.c:2108) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) ==12312== Address 0xbedacdd8 is on thread 1's stack ==12312== in frame #2, created by genl_resolve_mcg (genl.c:23) ==12312== 15 bytes in 1 blocks are definitely lost in loss record 352 of 836 ==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so) ==12312== by 0x12C30C: init (telnet.c:769) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) ==12312== ==12312== 15 bytes in 1 blocks are definitely lost in loss record 353 of 836 ==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so) ==12312== by 0x12D60A: init (tcp.c:392) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) * Fix another warnings by cppcheck [accel-pppd/ctrl/ipoe/arp.c:256]: (error) Uninitialized variable: n [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/pppoe.c:738]: (warning) Possible null pointer dereference [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/libnetlink/libnetlink.c:515]: (warning) Possible null pointer dereference [accel-pppd/ppp/ipv6cp_opt_intfid.c:185]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. * Suppress compiler warnings * Fix locking errors /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 279 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 279, 249. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 333 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 333, 315. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 422 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 422, 372. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 488 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 488, 468. /opt/pvs/accel-ppp/accel-pppd/triton/mempool.c 119 warn V1020 The function exited without calling the 'pthread_spin_unlock' function. Check lines: 119, 116. * Fix array len errors /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 75 warn V557 Array underrun is possible. The value of 'len - 1' index could reach -1. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 76 warn V557 Array underrun is possible. The value of '-- len' index could reach -1. * Fix possible memory leaks /opt/pvs/accel-ppp/accel-pppd/radius/radius.c 936 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible. /opt/pvs/accel-ppp/accel-pppd/radius/serv.c 622 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 144 err V773 The function was exited without releasing the 'raw' pointer. A memory leak is possible. * Fix unsafe code /opt/pvs/accel-ppp/accel-pppd/cli/tcp.c 364 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 338, 364. /opt/pvs/accel-ppp/accel-pppd/cli/telnet.c 701 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 675, 701. /opt/pvs/accel-ppp/accel-pppd/extra/ippool.c 241 err V614 Potentially uninitialized pointer 'pos' used. /opt/pvs/accel-ppp/accel-pppd/radius/dict.c 165 err V614 Uninitialized pointer 'parent_items' used. * Remove duplicate code /opt/pvs/accel-ppp/accel-pppd/radius/serv.c 202 warn V547 Expression 'ts.tv_sec < req->serv->fail_time' is always false. * Fix treating signed bool variables as unsigned * Add nullptr checking /opt/pvs/accel-ppp/accel-pppd/ipv6/dhcpv6.c 886 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 886, 890. /opt/pvs/accel-ppp/accel-pppd/ipv6/nd.c 479 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 479, 483. /opt/pvs/accel-ppp/accel-pppd/radius/auth.c 152 err V595 The 'rpd->auth_ctx' pointer was utilized before it was verified against nullptr. Check lines: 152, 154. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 114 err V595 The 'cur_sect' pointer was utilized before it was verified against nullptr. Check lines: 114, 117. * Add logging of exit conditions * Clarify calculation [accel-pppd/ppp/ccp_mppe.c:281]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:282]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:283]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:284]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:285]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:286]: (style) Clarify calculation precedence for '&' and '?'. [drivers/ipoe/ipoe.c:307]: (style) Clarify calculation precedence for '&' and '?'. * Fix void calculations [accel-pppd/ctrl/pppoe/disc.c:211]: (portability) 'pkt' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ctrl/pptp/pptp.c:150]: (portability) 'buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/acct.c:37]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/auth.c:35]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/auth.c:79]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:43]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:47]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:57]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:65]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:97]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/serv.c:364]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:115]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:122]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:276]: (portability) 'ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. * Fix void part 2 [accel-pppd/ipv6/dhcpv6.c:844]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ipv6/nd.c:199]: (portability) '(void*)dnsslinfo' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ipv6/nd.c:432]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. * Fix null pointer dereference [accel-pppd/ctrl/ipoe/ipoe.c:2048]: (warning) Possible null pointer dereference: eth [accel-pppd/ctrl/ipoe/ipoe.c:2049]: (warning) Possible null pointer dereference: iph * Remove redundant check /opt/pvs/accel-ppp/accel-pppd/ctrl/l2tp/packet.c 656 warn V547 Expression 'attr->length <= 16' is always false. * PR fixes * PR fixes 2

Fix some errors and warnings found by cppcheck

2021-03-13T11:43:15+00:00

[accel-pppd/ctrl/ipoe/ipoe.c:4054]: (style) A pointer can not be negative so it is either pointless or an error to check if it is not. [accel-pppd/logs/log_syslog.c:148]: (error) Array 'facility_name[9]' accessed at index 35, which is out of bounds. [accel-pppd/lua/session.c:274]: (error) Common realloc mistake: 'mods' nulled but not freed upon failure [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 2) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 3) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 4) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 5) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 2) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 3) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 4) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 5) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/main.c:97]: (warning) %d in format string (no. 1) requires 'int *' but the argument type is 'unsigned int *'. [accel-pppd/radius/radius.c:687] -> [accel-pppd/radius/radius.c:690]: (warning) Possible null pointer dereference: rpd - otherwise it is redundant to check it against null. [accel-pppd/radius/serv.c:805] -> [accel-pppd/radius/serv.c:829]: (warning) Possible null pointer dereference: ptr2 - otherwise it is redundant to check it against null. [accel-pppd/radius/serv.c:813] -> [accel-pppd/radius/serv.c:829]: (warning) Possible null pointer dereference: ptr2 - otherwise it is redundant to check it against null. [accel-pppd/radius/serv.c:823] -> [accel-pppd/radius/serv.c:829]: (warning) Possible null pointer dereference: ptr2 - otherwise it is redundant to check it against null.