1 files changed, 129 insertions, 0 deletions
diff --git a/example/etc/ppp/options.pptpd b/example/etc/ppp/options.pptpd
new file mode 100644
index 00000000..67beac04
--- /dev/null
+++ b/example/etc/ppp/options.pptpd
@@ -0,0 +1,129 @@
+###############################################################################
+# $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $
+#
+# Sample Poptop PPP options file /etc/ppp/options.pptpd
+# Options used by PPP when a connection arrives from a client.
+# This file is pointed to by /etc/pptpd.conf option keyword.
+# Changes are effective on the next connection.  See "man pppd".
+#
+# You are expected to change this file to suit your system.  As
+# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
+###############################################################################
+
+
+# Authentication
+
+# Name of the local system for authentication purposes 
+# (must match the second field in /etc/ppp/chap-secrets entries)
+name pptpd
+
+# Strip the domain prefix from the username before authentication.
+# (applies if you use pppd with chapms-strip-domain patch)
+#chapms-strip-domain
+
+
+# Encryption
+# (There have been multiple versions of PPP with encryption support,
+# choose with of the following sections you will use.)
+
+
+# BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o
+# {{{
+refuse-pap
+refuse-chap
+refuse-mschap
+# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
+# Challenge Handshake Authentication Protocol, Version 2] authentication.
+require-mschap-v2
+# Require MPPE 128-bit encryption
+# (note that MPPE requires the use of MSCHAP-V2 during authentication)
+require-mppe-128
+# }}}
+
+
+# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o
+# {{{
+#-chap
+#-chapms
+# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
+# Challenge Handshake Authentication Protocol, Version 2] authentication.
+#+chapms-v2
+# Require MPPE encryption
+# (note that MPPE requires the use of MSCHAP-V2 during authentication)
+#mppe-40	# enable either 40-bit or 128-bit, not both
+#mppe-128
+#mppe-stateless
+# }}}
+
+
+# Network and Routing
+
+# If pppd is acting as a server for Microsoft Windows clients, this
+# option allows pppd to supply one or two DNS (Domain Name Server)
+# addresses to the clients.  The first instance of this option
+# specifies the primary DNS address; the second instance (if given)
+# specifies the secondary DNS address.
+#ms-dns 10.0.0.1
+#ms-dns 10.0.0.2
+
+# If pppd is acting as a server for Microsoft Windows or "Samba"
+# clients, this option allows pppd to supply one or two WINS (Windows
+# Internet Name Services) server addresses to the clients.  The first
+# instance of this option specifies the primary WINS address; the
+# second instance (if given) specifies the secondary WINS address.
+#ms-wins 10.0.0.3
+#ms-wins 10.0.0.4
+
+# Add an entry to this system's ARP [Address Resolution Protocol]
+# table with the IP address of the peer and the Ethernet address of this
+# system.  This will have the effect of making the peer appear to other
+# systems to be on the local ethernet.
+# (you do not need this if your PPTP server is responsible for routing
+# packets to the clients -- James Cameron)
+proxyarp
+
+# Normally pptpd passes the IP address to pppd, but if pptpd has been
+# given the delegate option in pptpd.conf or the --delegate command line
+# option, then pppd will use chap-secrets or radius to allocate the
+# client IP address.  The default local IP address used at the server
+# end is often the same as the address of the server.  To override this,
+# specify the local IP address here.
+# (you must not use this unless you have used the delegate option)
+#10.8.0.100
+
+
+# Logging
+
+# Enable connection debugging facilities.
+# (see your syslog configuration for where pppd sends to)
+#debug
+
+# Print out all the option values which have been set.
+# (often requested by mailing list to verify options)
+#dump
+
+
+# Miscellaneous
+
+# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
+# access.
+#lock
+
+# Disable BSD-Compress compression
+nobsdcomp 
+nodeflate
+
+# Disable Van Jacobson compression 
+# (needed on some networks with Windows 9x/ME/XP clients, see posting to
+# poptop-server on 14th April 2005 by Pawel Pokrywka and followups,
+# http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 )
+novj
+novjccomp
+
+# turn off logging to stderr, since this may be redirected to pptpd, 
+# which may trigger a loopback
+nologfd
+
+# put plugins here 
+# (putting them higher up may cause them to sent messages to the pty)
+