diff options
Diffstat (limited to 'example/etc')
| -rw-r--r-- | example/etc/modprobe.conf | 1 | ||||
| -rw-r--r-- | example/etc/ppp/chap-secrets | 4 | ||||
| -rw-r--r-- | example/etc/ppp/options.pptp | 51 | ||||
| -rw-r--r-- | example/etc/ppp/options.pptpd | 129 | ||||
| -rw-r--r-- | example/etc/ppp/peers/pptp_test | 13 | ||||
| -rw-r--r-- | example/etc/pptpd.conf | 82 |
6 files changed, 280 insertions, 0 deletions
diff --git a/example/etc/modprobe.conf b/example/etc/modprobe.conf new file mode 100644 index 00000000..df0b014d --- /dev/null +++ b/example/etc/modprobe.conf @@ -0,0 +1 @@ +alias net-pf-24 pptp diff --git a/example/etc/ppp/chap-secrets b/example/etc/ppp/chap-secrets new file mode 100644 index 00000000..63fe6287 --- /dev/null +++ b/example/etc/ppp/chap-secrets @@ -0,0 +1,4 @@ +# Secrets for authentication using CHAP +# client server secret IP addresses +test pptp test * +test2 pptp test2 * diff --git a/example/etc/ppp/options.pptp b/example/etc/ppp/options.pptp new file mode 100644 index 00000000..f153273c --- /dev/null +++ b/example/etc/ppp/options.pptp @@ -0,0 +1,51 @@ +############################################################################### +# $Id: options.pptp,v 1.2 2005/08/20 13:16:38 quozl Exp $ +# +# Sample PPTP PPP options file /etc/ppp/options.pptp +# Options used by PPP when a connection is made by a PPTP client. +# This file can be referred to by an /etc/ppp/peers file for the tunnel. +# Changes are effective on the next connection. See "man pppd". +# +# You are expected to change this file to suit your system. As +# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ +# and the kernel MPPE module available from the CVS repository also on +# http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. +############################################################################### + +# Lock the port +#lock + +# Authentication +# We don't need the tunnel server to authenticate itself +noauth + +# We won't do EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 +refuse-eap +refuse-chap +refuse-mschap + +# Compression +# Turn off compression protocols we know won't be used +nobsdcomp +nodeflate +novj +novjccomp + +# Encryption +# (There have been multiple versions of PPP with encryption support, +# choose with of the following sections you will use. Note that MPPE +# requires the use of MSCHAP-V2 during authentication) + +# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras +# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o +# {{{ +# Require MPPE 128-bit encryption +require-mppe-128 +# }}} + +# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec +# ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o +# {{{ +# Require MPPE 128-bit encryption +#mppe required,stateless +# }}} diff --git a/example/etc/ppp/options.pptpd b/example/etc/ppp/options.pptpd new file mode 100644 index 00000000..67beac04 --- /dev/null +++ b/example/etc/ppp/options.pptpd @@ -0,0 +1,129 @@ +############################################################################### +# $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ +# +# Sample Poptop PPP options file /etc/ppp/options.pptpd +# Options used by PPP when a connection arrives from a client. +# This file is pointed to by /etc/pptpd.conf option keyword. +# Changes are effective on the next connection. See "man pppd". +# +# You are expected to change this file to suit your system. As +# packaged, it requires PPP 2.4.2 and the kernel MPPE module. +############################################################################### + + +# Authentication + +# Name of the local system for authentication purposes +# (must match the second field in /etc/ppp/chap-secrets entries) +name pptpd + +# Strip the domain prefix from the username before authentication. +# (applies if you use pppd with chapms-strip-domain patch) +#chapms-strip-domain + + +# Encryption +# (There have been multiple versions of PPP with encryption support, +# choose with of the following sections you will use.) + + +# BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o +# {{{ +refuse-pap +refuse-chap +refuse-mschap +# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft +# Challenge Handshake Authentication Protocol, Version 2] authentication. +require-mschap-v2 +# Require MPPE 128-bit encryption +# (note that MPPE requires the use of MSCHAP-V2 during authentication) +require-mppe-128 +# }}} + + +# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o +# {{{ +#-chap +#-chapms +# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft +# Challenge Handshake Authentication Protocol, Version 2] authentication. +#+chapms-v2 +# Require MPPE encryption +# (note that MPPE requires the use of MSCHAP-V2 during authentication) +#mppe-40 # enable either 40-bit or 128-bit, not both +#mppe-128 +#mppe-stateless +# }}} + + +# Network and Routing + +# If pppd is acting as a server for Microsoft Windows clients, this +# option allows pppd to supply one or two DNS (Domain Name Server) +# addresses to the clients. The first instance of this option +# specifies the primary DNS address; the second instance (if given) +# specifies the secondary DNS address. +#ms-dns 10.0.0.1 +#ms-dns 10.0.0.2 + +# If pppd is acting as a server for Microsoft Windows or "Samba" +# clients, this option allows pppd to supply one or two WINS (Windows +# Internet Name Services) server addresses to the clients. The first +# instance of this option specifies the primary WINS address; the +# second instance (if given) specifies the secondary WINS address. +#ms-wins 10.0.0.3 +#ms-wins 10.0.0.4 + +# Add an entry to this system's ARP [Address Resolution Protocol] +# table with the IP address of the peer and the Ethernet address of this +# system. This will have the effect of making the peer appear to other +# systems to be on the local ethernet. +# (you do not need this if your PPTP server is responsible for routing +# packets to the clients -- James Cameron) +proxyarp + +# Normally pptpd passes the IP address to pppd, but if pptpd has been +# given the delegate option in pptpd.conf or the --delegate command line +# option, then pppd will use chap-secrets or radius to allocate the +# client IP address. The default local IP address used at the server +# end is often the same as the address of the server. To override this, +# specify the local IP address here. +# (you must not use this unless you have used the delegate option) +#10.8.0.100 + + +# Logging + +# Enable connection debugging facilities. +# (see your syslog configuration for where pppd sends to) +#debug + +# Print out all the option values which have been set. +# (often requested by mailing list to verify options) +#dump + + +# Miscellaneous + +# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive +# access. +#lock + +# Disable BSD-Compress compression +nobsdcomp +nodeflate + +# Disable Van Jacobson compression +# (needed on some networks with Windows 9x/ME/XP clients, see posting to +# poptop-server on 14th April 2005 by Pawel Pokrywka and followups, +# http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) +novj +novjccomp + +# turn off logging to stderr, since this may be redirected to pptpd, +# which may trigger a loopback +nologfd + +# put plugins here +# (putting them higher up may cause them to sent messages to the pty) + diff --git a/example/etc/ppp/peers/pptp_test b/example/etc/ppp/peers/pptp_test new file mode 100644 index 00000000..113dfa98 --- /dev/null +++ b/example/etc/ppp/peers/pptp_test @@ -0,0 +1,13 @@ +plugin "pptp.so" +pptp_server 192.168.10.10 +#pptp_phone 12345 +name test +remotename pptp +file /etc/ppp/options.pptp +ipparam test +#debug +#dump +mtu 1436 +mru 1436 +lcp-echo-interval 20 +lcp-echo-failure 3 diff --git a/example/etc/pptpd.conf b/example/etc/pptpd.conf new file mode 100644 index 00000000..8c1a4459 --- /dev/null +++ b/example/etc/pptpd.conf @@ -0,0 +1,82 @@ +############################################################################### +# $Id: pptpd.conf,v 1.8 2004/04/28 11:36:07 quozl Exp $ +# +# Sample Poptop configuration file /etc/pptpd.conf +# +# Changes are effective when pptpd is restarted. +############################################################################### + +# TAG: ppp +# Path to the pppd program, default '/usr/sbin/pppd' on Linux +# +#ppp /usr/sbin/pppd + +# TAG: option +# Specifies the location of the PPP options file. +# By default PPP looks in '/etc/ppp/options' +# +option /etc/ppp/options.pptpd + +# TAG: debug +# Turns on (more) debugging to syslog +# +#debug + +# TAG: stimeout +# Specifies timeout (in seconds) on starting ctrl connection +# +# stimeout 10 + +# TAG: noipparam +# Suppress the passing of the client's IP address to PPP, which is +# done by default otherwise. +# +#noipparam + +# TAG: logwtmp +# Use wtmp(5) to record client connections and disconnections. +# +logwtmp + +# TAG: bcrelay <if> +# Turns on broadcast relay to clients from interface <if> +# +#bcrelay eth1 + +# TAG: localip +# TAG: remoteip +# Specifies the local and remote IP address ranges. +# +# Any addresses work as long as the local machine takes care of the +# routing. But if you want to use MS-Windows networking, you should +# use IP addresses out of the LAN address space and use the proxyarp +# option in the pppd options file, or run bcrelay. +# +# You can specify single IP addresses seperated by commas or you can +# specify ranges, or both. For example: +# +# 192.168.0.234,192.168.0.245-249,192.168.0.254 +# +# IMPORTANT RESTRICTIONS: +# +# 1. No spaces are permitted between commas or within addresses. +# +# 2. If you give more IP addresses than MAX_CONNECTIONS, it will +# start at the beginning of the list and go until it gets +# MAX_CONNECTIONS IPs. Others will be ignored. +# +# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238, +# you must type 234-238 if you mean this. +# +# 4. If you give a single localIP, that's ok - all local IPs will +# be set to the given one. You MUST still give at least one remote +# IP for each simultaneous client. +# +# (Recommended) +localip 192.168.0.1-4 +remoteip 192.168.0.234-238 +# or +#localip 192.168.0.234-238,192.168.0.245 +#remoteip 192.168.1.234-238,192.168.1.245 + +#speed 4800 |