19 files changed, 0 insertions, 1296 deletions
diff --git a/pptpd-1.3.3/debian/README.debian b/pptpd-1.3.3/debian/README.debian
deleted file mode 100644
index 9a985af6..00000000
--- a/pptpd-1.3.3/debian/README.debian
+++ /dev/null
@@ -1,8 +0,0 @@
-pptpd for DEBIAN
-----------------------
-
-Please note that, if you want to use pptpd to create host-to-site tunnels (e.g.
-typical road-warrior setups), then you will need to enable IP forwarding. This
-can be done by setting ip_forward=yes in /etc/network/options.
-
-Rene Mayrhofer <rene.mayrhofer@gibraltar.at>, Mon, 16 Aug 1999 11:27:43 +0200
diff --git a/pptpd-1.3.3/debian/changelog b/pptpd-1.3.3/debian/changelog
deleted file mode 100644
index cf41647a..00000000
--- a/pptpd-1.3.3/debian/changelog
+++ /dev/null
@@ -1,175 +0,0 @@
-pptpd (1.3.3-0) unstable; urgency=low
-
-  * Package built from upstream sources, not a Debian project package
-    (Debian Developer expected to adjust this entry)
-
- -- James Cameron <quozl@us.netrek.org>  Tue, 05 Sep 2006 10:51:43 +1100
-
-pptpd (1.2.0-0) unstable; urgency=low
-
-  * Package built from upstream sources, not a Debian project package
-    (Debian Developer expected to adjust this entry)
-    Closes: #107933: pptpd: pptpd segfaults if called without arguments 
-    Closes: #126486: pptpd: wish it had better integration support with 
-                     Portslave 
-
- -- James Cameron <james.cameron@hp.com>  Fri, 21 May 2004 20:13:51 +1000
-
-pptpd (1.1.4.0b4-1) unstable; urgency=low
-
-  * Finally acknowledge the bugs fixed in the NMUs:
-    Closes: #132819 (Build-Depends on devhelper)
-    Closes: #126712 (Mark /etc/init.d/pptpd as conffile)
-    Closes: #57849 (Remove recommends line)
-  * Enable the MSCHAP and MPPE options again in the default config, but now
-    changed for the new upstream pppd syntax.
-  * Also include the new upstream source in the upload - 
-    dpkg-buildpackage was confused by the version number.
-  * Enhance the init script to: 
-    - Include a "status" option.
-    - Force pptpd to close its file descriptors.
-    Closes: #189426: pptpd does not close/redirect stdout and stderr
-  * Use po-debconf for debconf translations and add pt_BR and FR translations.
-    However, debconf is still not used for autoconfig until I find time to 
-    implement the config script properly. It will come, soon ;)
-    Also fix some english short descriptions - thanks for pointing that out.
-    Closes: #191703: Update packaging to use the newer gettext-based debconf 
-            template translation system
-    Closes: #208049: Please switch to gettext-based debconf templates
-    Closes: #211273: French translation of gettext debconf template
-    I will leave #209082 open until the config script works....
-  * Also ship the README.bcrelay file in the binary package.
-  * Move the HOWTO-IPX+PPTP.txt file from the html/ directory to the normal
-    doc directory.
-    Closes: #220707: CVS directory, and non-html in 'html' dir
-  * Document that IP forwarding needs to be enabled, but refer to 
-    /etc/network/options instead of /proc/sys/net/ipv4/ip_forward.
-    Closes: #168718: Documentation has no reference to 
-            /proc/sys/net/ipv4/ip_forward
-
- -- Rene Mayrhofer <rmayr@debian.org>  Wed, 23 Apr 2003 13:34:50 +0200
-
-pptpd (1.1.4-0.b3.1) unstable; urgency=HIGH
-
-  * New upstream release (to fix the security issue).
-    Closes: #189363: pptpd: PoPToP versions earlier than 1.1.3 have a 
-                     remotely exploitable buffer overflow
-    Closes: #107933: pptpd: pptpd segfaults if called without arguments
-  * Enabled the broadcast relay option.
-  * The default pptpd-options no longer includes "+chapms"
-    Closes: #179808: pptpd: Completely fails to work
-  * Acknowledge bug report closed by NMUs:
-    Closes: #132819
-    Closes: #126712
-    Closes: #57849
-
- -- Rene Mayrhofer <rmayr@debian.org>  Wed, 23 Apr 2003 12:12:38 +0200
-
-pptpd (1.1.2-2) unstable; urgency=low
-
-  * New upstream version
-
- -- Rene Mayrhofer <rene@mayrhofer.eu.org>  Wed, 30 Jul 2003 22:36:01 +0200
-
-pptpd (1.1.2-1.3.woody.0) stable; urgency=HIGH
-
-  * Security fix for the remotely exploitable buffer overflow.
-
- -- Rene Mayrhofer <rmayr@debian.org>  Wed, 23 Apr 2003 13:10:05 +0200
-
-pptpd (1.1.2-1.2) unstable; urgency=low
-
-  * Non-maintainer upload
-  * Mark /etc/init.d/pptpd as a conffile, per policy (closes: #132819).
-
- -- Steve Langasek <vorlon@debian.org>  Sat, 16 Feb 2002 12:09:44 -0600
-
-pptpd (1.1.2-1.1) unstable; urgency=low
-
-  * NMU
-  * Add build-depends: debhelper.  Closes: #126712.
-
- -- LaMont Jones <lamont@debian.org>  Mon, 14 Jan 2002 22:08:38 -0700
-
-pptpd (1.1.2-1) unstable; urgency=low
-
-  * Updated to new upstream version (declared as development version, but it
-    is around long enough to seem stable).
-    Closes: #109908
-  * Do not ship pptpdconfig.pl since it does not work correctly at the
-    moment.
-    Closes: #82385
-  * Took out all MPPE options from pptpd-options (the options for pppd) as
-    long as the default pppd package does not support it.
-    Closes: #61651
-  * Changed maintainer email to rmayr@debian.org
-
- -- Rene Mayrhofer <rene.mayrhofer@debian.org>  Thu, 27 Dec 2001 11:17:51 +0100
-
-pptpd (1.0.1-2) unstable; urgency=low
-
-  * Changed the dependency from perl to perl-base. 
-
- -- Rene Mayrhofer <rene.mayrhofer@vianova.at>  Tue, 26 Dec 2000 15:44:38 +0100
-
-pptpd (1.0.1-1) unstable; urgency=low
-
-  * New upstream release.
-    The debconf support is still disabled because I do not have time to
-    write a perl script that can change the configuration files (only 2 files
-    need to be changed) thet is really safe (i.e. it does not mess with manual
-    configuration in those files). If anybody can contribute, I would be very
-    happy.
-
- -- Rene Mayrhofer <rene.mayrhofer@vianova.at>  Mon, 20 Nov 2000 17:38:35 +0100
-
-pptpd (1.0.0-5) unstable; urgency=low
-
-  * First try with debconf support and postinst config script
-
- -- Rene Mayrhofer <rene.mayrhofer@vianova.at>  Tue, 11 Jul 2000 17:06:10 +0200
-
-pptpd (1.0.0-4) frozen unstable; urgency=low
-
-  * Added a config script to the postinst (now disabled because of problems
-    with debconf perl support - next upload will include it)
-  * Preliminary support for debconf (now disabled because of problems with
-    (debconf perl support - next upload will include it)
-  * Removed the debug option from /etc/pptpd.conf
-  * Updated the HOWTO with a new version from the upstream maintainer
-  * Removed the Recommend: ppp-pam (closes: #57849)
-
- -- Rene Mayrhofer <rmayr@vianova.at>  Fri,  1 Oct 1999 11:06:39 +0200
-
-pptpd (1.0.0-3) unstable; urgency=low
-
-  * The init script now uses the pidfile created by pptpd
-
- -- Rene Mayrhofer <rmayr@vianova.at>  Thu, 30 Sep 1999 11:31:11 +0200
-
-pptpd (1.0.0-2) unstable; urgency=low
-
-  * Enhanced the init script to recognize force-reload.
-  * Moved manual pages to /usr/share/man
-  * Added support for TCP wrappers
-
- -- Rene Mayrhofer <rmayr@vianova.at>  Wed, 29 Sep 1999 13:35:05 +0200
-
-pptpd (1.0.0-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Rene Mayrhofer <rmayr@vianova.at>  Tue, 28 Sep 1999 16:49:26 +0200
-
-pptpd (0.9.13-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Rene Mayrhofer <rmayr@vianova.at>  Tue, 24 Aug 1999 08:05:29 +0200
-
-pptpd (0.9.12-1) unstable; urgency=low
-
-  * Initial Release.
-
- -- Rene Mayrhofer <rmayr@vianova.at>  Tue, 24 Aug 1999 08:05:10 +0200
-
diff --git a/pptpd-1.3.3/debian/conffiles b/pptpd-1.3.3/debian/conffiles
deleted file mode 100644
index a05023b3..00000000
--- a/pptpd-1.3.3/debian/conffiles
+++ /dev/null
@@ -1,3 +0,0 @@
-/etc/pptpd.conf
-/etc/ppp/pptpd-options
-/etc/init.d/pptpd
diff --git a/pptpd-1.3.3/debian/config b/pptpd-1.3.3/debian/config
deleted file mode 100644
index b7329342..00000000
--- a/pptpd-1.3.3/debian/config
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh -e
-# Rene Mayrhofer <rmayr@vianova.at>, Oct. 1999
-# I hereby put this script under the Artistic License.
-
-. /usr/share/debconf/confmodule.sh
-
-db_input high pptpd/localip
-db_input high pptpd/remoteip
-
-# ask if mppe encryption should be used
-db_input pptpd/mppe
-db_go
-
-# check the answer(s)
-db_get pptpd/mppe
-if [ "$RET" = "false" ]; then
-	# display a warning
-	db_input high pptpd/no-mppe
-	db_go
-fi
-
-
diff --git a/pptpd-1.3.3/debian/control b/pptpd-1.3.3/debian/control
deleted file mode 100644
index 7823247b..00000000
--- a/pptpd-1.3.3/debian/control
+++ /dev/null
@@ -1,15 +0,0 @@
-Source: pptpd
-Section: net
-Priority: optional
-Maintainer: Rene Mayrhofer <rmayr@debian.org>
-Standards-Version: 3.0.1.0
-Build-Depends: libwrap0-dev, debhelper (>= 4.1.16)
-
-Package: pptpd
-Architecture: any
-Depends: ${shlibs:Depends}, ppp (>=2.4.2+20030811-1), netbase, debconf, perl-base
-Build-Depends: debhelper
-Description: PoPToP Point to Point Tunneling Server
- This implements a Virtual Private Networking Server (VPN) that is compatible
- with Microsoft VPN clients. It allows windows users to connect to an
- internal firewalled network using their dialup.
diff --git a/pptpd-1.3.3/debian/copyright b/pptpd-1.3.3/debian/copyright
deleted file mode 100644
index 84477a4b..00000000
--- a/pptpd-1.3.3/debian/copyright
+++ /dev/null
@@ -1,11 +0,0 @@
-This package was debianized by Rene Mayrhofer rene.mayrhofer@gibraltar.at on
-Mon, 16 Aug 1999 11:27:43 +0200.
-
-It was downloaded from 'http://www.moretonbay.com/vpn/pptp.html'
-
-Upstream Authors: Please look at file AUTHORS
-
-Copyright:
-
-PPTPd is released under the GPL. You should find a copy of the GPL in
-'/usr/share/common-licenses/GPL' on Debian systems.
diff --git a/pptpd-1.3.3/debian/dirs b/pptpd-1.3.3/debian/dirs
deleted file mode 100644
index 40d9d223..00000000
--- a/pptpd-1.3.3/debian/dirs
+++ /dev/null
@@ -1,4 +0,0 @@
-usr/sbin
-etc
-etc/ppp
-etc/init.d
diff --git a/pptpd-1.3.3/debian/docs b/pptpd-1.3.3/debian/docs
deleted file mode 100644
index d4438d0a..00000000
--- a/pptpd-1.3.3/debian/docs
+++ /dev/null
@@ -1,8 +0,0 @@
-AUTHORS
-ChangeLog-0.8
-ChangeLog-0.9
-README
-README.inetd
-README.slirp
-README.bcrelay
-TODO 
diff --git a/pptpd-1.3.3/debian/examples b/pptpd-1.3.3/debian/examples
deleted file mode 100644
index fbb78fb7..00000000
--- a/pptpd-1.3.3/debian/examples
+++ /dev/null
@@ -1,3 +0,0 @@
-samples/chap-secrets
-samples/options.pptpd
-samples/pptpd.conf
diff --git a/pptpd-1.3.3/debian/po/POTFILES.in b/pptpd-1.3.3/debian/po/POTFILES.in
deleted file mode 100644
index cef83a34..00000000
--- a/pptpd-1.3.3/debian/po/POTFILES.in
+++ /dev/null
@@ -1 +0,0 @@
-[type: gettext/rfc822deb] templates
diff --git a/pptpd-1.3.3/debian/po/fr.po b/pptpd-1.3.3/debian/po/fr.po
deleted file mode 100644
index 5b8706c2..00000000
--- a/pptpd-1.3.3/debian/po/fr.po
+++ /dev/null
@@ -1,208 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: ddtpd 1.1.4-0.b3.2\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-09-07 13:05+0200\n"
-"PO-Revision-Date: 2003-09-07 18:20+0200\n"
-"Last-Translator: Nicolas Bertolissio <nico.bertol@free.fr>\n"
-"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../templates:3
-msgid "The local IP address of the virtual connections"
-msgstr "Adresse IP locale pour les connexions virtuelles"
-
-#. Description
-#: ../templates:3
-msgid "Specify the local IP address for the virtual connections."
-msgstr "Veuillez indiquer l'adresse IP locale pour les connexions virtuelles."
-
-#. Description
-#: ../templates:3
-msgid ""
-"Please note that any address works as long as the local machine takes care "
-"of the routing. But if you want to use MS-Windows networking, you should use "
-"an IP address out of the LAN address space."
-msgstr ""
-"Veuillez noter que toute adresse convient tant que la machine locale "
-"s'occupe du routage. Mais si vous souhaitez utiliser un r�seau MS-Windows, "
-"vous devriez utiliser une adresse IP hors de l'espace d'adressage du r�seau "
-"local."
-
-#. Description
-#: ../templates:3
-msgid ""
-"You can give only one address or you can give multiple addresses if you want "
-"to, although they are really not needed. Multiple addresses can be given as "
-"either \"10.0.0.1,10.0.0.2,10.0.0.3\" or \"10.0.0.1-3\". No spaces should be "
-"used between commas or within addresses."
-msgstr ""
-"Vous pouvez ne fournir qu'une seule adresse, mais aussi plusieurs bien que "
-"cela ne soit pas n�cessaire. Pour plusieurs adresses, vous pouvez utiliser "
-"soit ��10.0.0.1,10.0.0.2,10.0.0.3�� soit ��10.0.0.1-3��. Aucun espace ne "
-"devrait figurer entre les virgules ou dans les adresses."
-
-#. Description
-#: ../templates:17
-msgid "A list of remote IP addresses for the virtual connections"
-msgstr "Liste d'adresses IP distantes pour les connexions virtuelles"
-
-#. Description
-#: ../templates:17
-msgid "Specify the remote IP addresses for the virtual connections."
-msgstr ""
-"Veuillez indiquer les adresses IP distantes pour les connexions virtuelles."
-
-#. Description
-#: ../templates:17
-msgid ""
-"Please note that any addresses work as long as the local machine takes care "
-"of the routing. But if you want to use MS-Windows networking, you should use "
-"IP addresses out of the LAN address space."
-msgstr ""
-"Veuillez noter que toute adresse convient tant que la machine locale "
-"s'occupe du routage. Mais si vous souhaitez utiliser un r�seau MS-Windows, "
-"vous devriez utiliser une adresse IP hors de l'espace d'adressage du r�seau "
-"local."
-
-#. Description
-#: ../templates:17
-msgid ""
-"You have to give one address for every concurrent connection. This will "
-"depend on how many clients you expect to be online at the same time. "
-"Multiple addresses can be given as either \"10.0.0.1,10.0.0.2,10.0.0.3\" or "
-"\"10.0.0.1-3\". No spaces should be used between commas or within addresses."
-msgstr ""
-"Vous devez fournir une adresse pour chaque connexion autoris�e. Cela d�pend "
-"du nombre de clients attendus en m�me temps. Pour plusieurs adresses, vous "
-"pouvez utiliser soit ��10.0.0.1,10.0.0.2,10.0.0.3�� soit ��10.0.0.1-3��. "
-"Aucun espace ne devrait figurer entre les virgules ou dans les adresses."
-
-#. Description
-#: ../templates:31
-msgid "The netmask used for virtual connections"
-msgstr "Masque de r�seau pour les connexions virtuelles"
-
-#. Description
-#: ../templates:31
-msgid ""
-"If you use IP addresses from the LAN address space, please use the same "
-"netmask as on your LAN."
-msgstr ""
-"Si vous utilisez des adresses IP de l'espace d'adressage du r�seau local, "
-"veuillez indiquer le m�me masque que pour votre r�seau."
-
-#. Description
-#: ../templates:37
-msgid "The IP address of your WINS server"
-msgstr "Adresse IP de votre serveur WINS"
-
-#. Description
-#: ../templates:37
-msgid ""
-"A WINS server is used for browsing available Computers in MS-Windows "
-"networking. This address is transmitted to the clients,"
-msgstr ""
-"Un serveur WINS sert � trouver les ordinateurs disponibles sur un r�seau MS-"
-"Windows. Cette adresse sera transmise aux clients."
-
-#. Description
-#: ../templates:43
-msgid "The IP address of your DNS server"
-msgstr "Adresse IP de votre serveur DNS"
-
-#. Description
-#: ../templates:43
-msgid "This address is transmitted to the clients."
-msgstr "Cette adresse sera transmise aux clients."
-
-#. Description
-#: ../templates:49
-msgid "Do you want to use MPPE data encryption ?"
-msgstr "Faut-il utiliser le chiffrement de donn�es MPPE�?"
-
-#. Description
-#: ../templates:49
-msgid ""
-"The recommended way is to use the data encryption as it is one of the main "
-"benefits of a VPN. When you want to use MPPE (Microsoft Point-to-Point "
-"Encryption), you also  have to use CHAPMSv2 for authentication."
-msgstr ""
-"Il est recommand� d'utiliser le chiffrement de donn�es car il s'agit de l'un "
-"des principaux avantages d'un r�seau priv� virtuel. Si vous souhaitez "
-"utiliser MPPE (��Microsoft Point-to-Point Encryption��, chiffrement point-�-"
-"point de Microsoft), vous devrez aussi utiliser CHAPMSv2 pour "
-"l'authentification."
-
-#. Description
-#: ../templates:49
-msgid ""
-"Note that you have to install the modified ppp packages if you want to use "
-"this data encryption."
-msgstr ""
-"Veuillez notez que vous devez installer les paquets de ppp modifi�s si vous "
-"souhaitez utiliser ce chiffrement de donn�es."
-
-#. Description
-#: ../templates:59
-msgid "Warning: data encryption is disabled"
-msgstr "Attention�: le chiffrement de donn�es est d�sactiv�"
-
-#. Description
-#: ../templates:59
-msgid ""
-"All data transferred between the local network and the client will be "
-"transmitted without encryption ! This is a security hole."
-msgstr ""
-"Toutes les donn�es transf�r�es entre le r�seau local et le client seront "
-"transmises sans chiffrement�! Il s'agit d'une faille de s�curit�."
-
-#. Description
-#: ../templates:59
-msgid "You have been warned. Now you loose your product warranty :)"
-msgstr ""
-"Vous voil� pr�venu. Vous perdez d�sormais la seule garantie de ce produit�:)"
-
-#. Description
-#: ../templates:69
-msgid "Which authentication method do you want to use ?"
-msgstr "M�thode d'authentification � utiliser"
-
-#. Description
-#: ../templates:69
-msgid ""
-"Possible authentication methods are: - PAP - CHAP - CHAP with Microsoft "
-"extensions - CHAP with Microsoft extensions v2"
-msgstr ""
-"Les m�thodes d'authentification disponibles sont�: PAP, CHAP, CHAP avec des "
-"extensions de Microsoft et CHAP avec les extensions de Microsoft version�2."
-
-#. Description
-#: ../templates:69
-msgid ""
-"The recommended authentication method is one of the CHAP methods. However, "
-"you have to use a separate database (/etc/ppp/chap-secrets) if you want to "
-"use these. If you use PAP, you can use the standard system passwords when "
-"the ppp-pam package is installed."
-msgstr ""
-"Les m�thodes d'authentification CHAP sont recommand�es. Quoi qu'il en soit, "
-"vous devrez utiliser une base de donn�es s�par�e (/etc/ppp/chap-secrets) si "
-"vous souhaitez les utiliser. Si vous choisissez PAP, vous pourrez utiliser "
-"les mots de passe standards du syst�me apr�s l'installation du paquet ppp-"
-"pam."
diff --git a/pptpd-1.3.3/debian/po/pt_BR.po b/pptpd-1.3.3/debian/po/pt_BR.po
deleted file mode 100644
index ce67da33..00000000
--- a/pptpd-1.3.3/debian/po/pt_BR.po
+++ /dev/null
@@ -1,204 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: pptpd_1.1.4-0.b3.2\n"
-"POT-Creation-Date: 2003-05-02 20:05-0300\n"
-"PO-Revision-Date: 2003-05-02 20:26-0300\n"
-"Last-Translator: Andr� Lu�s Lopes <andrelop@ig.com.br>\n"
-"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../templates:3
-msgid "The local IP address of the virtual connections"
-msgstr "O endere�o IP local das conex�es virtuais"
-
-#. Description
-#: ../templates:3
-msgid "Specify the local IP address for the virtual connections."
-msgstr "Especifique o endere�o IP local para as conex�es virtuais."
-
-#. Description
-#: ../templates:3
-msgid ""
-"Please note that any address works as long as the local machine takes care "
-"of the routing. But if you want to use MS-Windows networking, you should use "
-"an IP address out of the LAN address space."
-msgstr ""
-"Por favor note que qualquer endere�o funcionar� contanto que o m�quina "
-"local gerencie o roteamento. Mas caso voc� queira usar a rede "
-"MS-Windows voc� dever� usar um endere�o IP fora do espa�o de endere�os "
-"da LAN."
-
-#. Description
-#: ../templates:3
-msgid ""
-"You can give only one address or you can give multiple addresses if you want "
-"to, although they are really not needed. Multiple addresses can be given as "
-"either \"10.0.0.1,10.0.0.2,10.0.0.3\" or \"10.0.0.1-3\". No spaces should be "
-"used between commas or within addresses."
-msgstr ""
-"Voc� pode fornecer somente um endere�o ou voc� pode fornecer diversos "
-"endere�os caso deseje, por�m eles realmente n�o s�o necess�rios. "
-"M�ltiplos endere�os podem ser fornecidos informados como "
-"\"10.0.0.1,10.0.0.3\" ou \"10.0.0.1-3\". Nenhum espa�o deve ser "
-"informado entre as v�rgulas ou como parte dos endere�os."
-
-#. Description
-#: ../templates:17
-msgid "A list of remote IP addresses for the virtual connections."
-msgstr "Uma lista de endere�os IP remotos para as conex�es virtuais."
-
-#. Description
-#: ../templates:17
-msgid "Specify the remote IP addresses for the virtual connections."
-msgstr "Especifique os endere�os IP remotos para as conex�es virtuais."
-
-#. Description
-#: ../templates:17
-msgid ""
-"Please note that any addresses work as long as the local machine takes care "
-"of the routing. But if you want to use MS-Windows networking, you should use "
-"IP addresses out of the LAN address space."
-msgstr ""
-"Por favor note que qualquer endere�o funcionar� contanto que o m�quina "
-"local gerencie o roteamento. Mas caso voc� queira usar a rede "
-"MS-Windows voc� dever� usar endere�os IP fora do espa�o de endere�os "
-"da LAN."
-
-#. Description
-#: ../templates:17
-msgid ""
-"You have to give one address for every concurrent connection. This will "
-"depend on how many clients you expect to be online at the same time. "
-"Multiple addresses can be given as either \"10.0.0.1,10.0.0.2,10.0.0.3\" or "
-"\"10.0.0.1-3\". No spaces should be used between commas or within addresses."
-msgstr ""
-"Voc� precisa fornecer um endere�o para cada conex�o concorrente. Isso "
-"depender� de quantos clientes voc� espera que estejam on-line ao mesmo "
-"tempo. Diversos endere�os podem ser informados como "
-"\"10.0.0.1,10.0.0.2,10.0.0.3\" ou \"10.0.0.1-3\". Nenhum espa�o dever� "
-"ser usado entre as v�rgulas ou como parte dos endere�os."
-
-#. Description
-#: ../templates:31
-msgid "The netmask used for virtual connections."
-msgstr "A m�scara de rede usada para conex�es virtuais."
-
-#. Description
-#: ../templates:31
-msgid ""
-"If you use IP addresses from the LAN address space, please use the same "
-"netmask as on your LAN."
-msgstr ""
-"Caso voc� utilize endere�os IP do espa�o de endere�os da LAN por favor "
-"usae a mesma m�scara de rede usada em sua LAN."
-
-#. Description
-#: ../templates:37
-msgid "The IP address of your WINS server."
-msgstr "O endere�o IP de seu servidor WINS."
-
-#. Description
-#: ../templates:37
-msgid ""
-"A WINS server is used for browsing available Computers in MS-Windows "
-"networking. This address is transmitted to the clients,"
-msgstr ""
-"Um servidor WINS � usado para navegar pelos computadores dispon�veis "
-"em rede MS-Windows. Esse endere�o � transmitido para os clientes."
-
-#. Description
-#: ../templates:43
-msgid "The IP address of your DNS server."
-msgstr "O endere�o IP de seu servidor DNS."
-
-#. Description
-#: ../templates:43
-msgid "This address is transmitted to the clients."
-msgstr "Esse endere�o � transmitido para os clientes."
-
-#. Description
-#: ../templates:49
-msgid "Do you want to use MPPE data encryption ?"
-msgstr "Voc� deseja usar encripta��o de dados MPPE ?"
-
-#. Description
-#: ../templates:49
-msgid ""
-"The recommended way is to use the data encryption as it is one of the main "
-"benefits of a VPN. When you want to use MPPE (Microsoft Point-to-Point "
-"Encryption), you also  have to use CHAPMSv2 for authentication. . Note that "
-"you have to install the modified ppp packages if you want to use this data "
-"encryption."
-msgstr ""
-"A maneira recomendada � usar a encripta��o de dados uma vez que esse � "
-"um dos principais benef�cios de um VPN. Quando usar MPPE (Microsoft "
-"Point-to-Point Encryption) voc� ter� tamb�m que usar CHAPMSv2 para "
-"autentica��o. Note que voc� precisa instalar os pacotes ppp modificados "
-"caso voc� queira usar essa encripta��o de dados."
-
-#. Description
-#: ../templates:58
-msgid "Warning: data encryption is disabled."
-msgstr "Aviso : a encripta��o de dados est� desabilitada."
-
-#. Description
-#: ../templates:58
-msgid ""
-"All data transferred between the local network and the client will be "
-"transmitted without encryption ! This is a security hole."
-msgstr ""
-"Todos os dados transferidos entre a rede local e o cliente ser�o "
-"transferidos sem encripta��o ! Isto � uma falha de seguran�a."
-
-#. Description
-#: ../templates:58
-msgid "You have been warned. Now you loose your product warranty :)"
-msgstr "Voc� foi avisado. Agora voc� perdeu a garantia do produto :)"
-
-#. Choices
-#: ../templates:66
-msgid "pap, chap, chapms, chapms-v2"
-msgstr "pap, chap, chapms, chapms-v2"
-
-#. Description
-#: ../templates:68
-msgid "Which authentication method do you want to use ?"
-msgstr "Qual m�todo de autentica��o voc� deseja usar ?"
-
-#. Description
-#: ../templates:68
-msgid ""
-"Possible authentication methods are: - PAP - CHAP - CHAP with Microsoft "
-"extensions - CHAP with Microsoft extensions v2"
-msgstr ""
-"Os m�todos de autentica��o poss�veis s�o : PAP - CHAP - CHAP com "
-"extens�es Microsoft - CHAP com extens�es Microsoft v2"
-
-#. Description
-#: ../templates:68
-msgid ""
-"The recommended authentication method is one of the CHAP methods. However, "
-"you have to use a separate database (/etc/ppp/chap-secrets) if you want to "
-"use these. If you use PAP, you can use the standard system passwords when "
-"the ppp-pam package is installed."
-msgstr ""
-"O m�todo de autentica��o recomendado � um dos m�todos CHAP. Por�m, voc� "
-"precisar� usar uma base de dados separada (/etc/ppp/chap-secrets) caso "
-"voc� queira us�-los. Caso voc� use PAP, voc� poder� usar o sistema de "
-"senhas padr�o quando o pacote ppp-pam for instalado."
diff --git a/pptpd-1.3.3/debian/po/templates.pot b/pptpd-1.3.3/debian/po/templates.pot
deleted file mode 100644
index 42c04d81..00000000
--- a/pptpd-1.3.3/debian/po/templates.pot
+++ /dev/null
@@ -1,170 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2003-05-02 20:05-0300\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../templates:3
-msgid "The local IP address of the virtual connections"
-msgstr ""
-
-#. Description
-#: ../templates:3
-msgid "Specify the local IP address for the virtual connections."
-msgstr ""
-
-#. Description
-#: ../templates:3
-msgid ""
-"Please note that any address works as long as the local machine takes care "
-"of the routing. But if you want to use MS-Windows networking, you should use "
-"an IP address out of the LAN address space."
-msgstr ""
-
-#. Description
-#: ../templates:3
-msgid ""
-"You can give only one address or you can give multiple addresses if you want "
-"to, although they are really not needed. Multiple addresses can be given as "
-"either \"10.0.0.1,10.0.0.2,10.0.0.3\" or \"10.0.0.1-3\". No spaces should be "
-"used between commas or within addresses."
-msgstr ""
-
-#. Description
-#: ../templates:17
-msgid "A list of remote IP addresses for the virtual connections."
-msgstr ""
-
-#. Description
-#: ../templates:17
-msgid "Specify the remote IP addresses for the virtual connections."
-msgstr ""
-
-#. Description
-#: ../templates:17
-msgid ""
-"Please note that any addresses work as long as the local machine takes care "
-"of the routing. But if you want to use MS-Windows networking, you should use "
-"IP addresses out of the LAN address space."
-msgstr ""
-
-#. Description
-#: ../templates:17
-msgid ""
-"You have to give one address for every concurrent connection. This will "
-"depend on how many clients you expect to be online at the same time. "
-"Multiple addresses can be given as either \"10.0.0.1,10.0.0.2,10.0.0.3\" or "
-"\"10.0.0.1-3\". No spaces should be used between commas or within addresses."
-msgstr ""
-
-#. Description
-#: ../templates:31
-msgid "The netmask used for virtual connections."
-msgstr ""
-
-#. Description
-#: ../templates:31
-msgid ""
-"If you use IP addresses from the LAN address space, please use the same "
-"netmask as on your LAN."
-msgstr ""
-
-#. Description
-#: ../templates:37
-msgid "The IP address of your WINS server."
-msgstr ""
-
-#. Description
-#: ../templates:37
-msgid ""
-"A WINS server is used for browsing available Computers in MS-Windows "
-"networking. This address is transmitted to the clients,"
-msgstr ""
-
-#. Description
-#: ../templates:43
-msgid "The IP address of your DNS server."
-msgstr ""
-
-#. Description
-#: ../templates:43
-msgid "This address is transmitted to the clients."
-msgstr ""
-
-#. Description
-#: ../templates:49
-msgid "Do you want to use MPPE data encryption ?"
-msgstr ""
-
-#. Description
-#: ../templates:49
-msgid ""
-"The recommended way is to use the data encryption as it is one of the main "
-"benefits of a VPN. When you want to use MPPE (Microsoft Point-to-Point "
-"Encryption), you also  have to use CHAPMSv2 for authentication. . Note that "
-"you have to install the modified ppp packages if you want to use this data "
-"encryption."
-msgstr ""
-
-#. Description
-#: ../templates:58
-msgid "Warning: data encryption is disabled."
-msgstr ""
-
-#. Description
-#: ../templates:58
-msgid ""
-"All data transferred between the local network and the client will be "
-"transmitted without encryption ! This is a security hole."
-msgstr ""
-
-#. Description
-#: ../templates:58
-msgid "You have been warned. Now you loose your product warranty :)"
-msgstr ""
-
-#. Choices
-#: ../templates:66
-msgid "pap, chap, chapms, chapms-v2"
-msgstr ""
-
-#. Description
-#: ../templates:68
-msgid "Which authentication method do you want to use ?"
-msgstr ""
-
-#. Description
-#: ../templates:68
-msgid ""
-"Possible authentication methods are: - PAP - CHAP - CHAP with Microsoft "
-"extensions - CHAP with Microsoft extensions v2"
-msgstr ""
-
-#. Description
-#: ../templates:68
-msgid ""
-"The recommended authentication method is one of the CHAP methods. However, "
-"you have to use a separate database (/etc/ppp/chap-secrets) if you want to "
-"use these. If you use PAP, you can use the standard system passwords when "
-"the ppp-pam package is installed."
-msgstr ""
diff --git a/pptpd-1.3.3/debian/pptpd-options b/pptpd-1.3.3/debian/pptpd-options
deleted file mode 100644
index e21093ac..00000000
--- a/pptpd-1.3.3/debian/pptpd-options
+++ /dev/null
@@ -1,94 +0,0 @@
-###############################################################################
-# $Id: pptpd-options,v 1.1 2004/05/17 02:16:35 quozl Exp $
-#
-# Sample Poptop PPP options file /etc/ppp/pptpd-options
-# Options used by PPP when a connection arrives from a client.
-# This file is pointed to by /etc/pptpd.conf option keyword.
-# Changes are effective on the next connection.  See "man pppd".
-#
-# You are expected to change this file to suit your system.  As
-# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
-###############################################################################
-
-
-# Authentication
-
-# Name of the local system for authentication purposes 
-# (must match the second field in /etc/ppp/chap-secrets entries)
-name pptpd
-
-# Optional: domain name to use for authentication
-# domain mydomain.net
-
-# Strip the domain prefix from the username before authentication.
-# (applies if you use pppd with chapms-strip-domain patch)
-#chapms-strip-domain
-
-
-# Encryption
-# Debian: on systems with a kernel built with the package
-# kernel-patch-mppe >= 2.4.2 and using ppp >= 2.4.2, ...
-# {{{
-refuse-pap
-refuse-chap
-refuse-mschap
-# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
-# Challenge Handshake Authentication Protocol, Version 2] authentication.
-require-mschap-v2
-# Require MPPE 128-bit encryption
-# (note that MPPE requires the use of MSCHAP-V2 during authentication)
-require-mppe-128
-# }}}
-
-
-
-
-# Network and Routing
-
-# If pppd is acting as a server for Microsoft Windows clients, this
-# option allows pppd to supply one or two DNS (Domain Name Server)
-# addresses to the clients.  The first instance of this option
-# specifies the primary DNS address; the second instance (if given)
-# specifies the secondary DNS address.
-#ms-dns 10.0.0.1
-#ms-dns 10.0.0.2
-
-# If pppd is acting as a server for Microsoft Windows or "Samba"
-# clients, this option allows pppd to supply one or two WINS (Windows
-# Internet Name Services) server addresses to the clients.  The first
-# instance of this option specifies the primary WINS address; the
-# second instance (if given) specifies the secondary WINS address.
-#ms-wins 10.0.0.3
-#ms-wins 10.0.0.4
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.  This will have the effect of making the peer appear to other
-# systems to be on the local ethernet.
-# (you do not need this if your PPTP server is responsible for routing
-# packets to the clients -- James Cameron)
-proxyarp
-
-# Debian: do not replace the default route
-nodefaultroute
-
-
-# Logging
-
-# Enable connection debugging facilities.
-# (see your syslog configuration for where pppd sends to)
-#debug
-
-# Print out all the option values which have been set.
-# (often requested by mailing list to verify options)
-#dump
-
-
-# Miscellaneous
-
-# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
-# access.
-lock
-
-# Disable BSD-Compress compression
-nobsdcomp 
diff --git a/pptpd-1.3.3/debian/pptpd.conf b/pptpd-1.3.3/debian/pptpd.conf
deleted file mode 100644
index 889f2440..00000000
--- a/pptpd-1.3.3/debian/pptpd.conf
+++ /dev/null
@@ -1,80 +0,0 @@
-###############################################################################
-# $Id: pptpd.conf,v 1.1 2004/05/17 02:16:35 quozl Exp $
-#
-# Sample Poptop configuration file /etc/pptpd.conf
-#
-# Changes are effective when pptpd is restarted.
-###############################################################################
-
-# TAG: ppp
-#	Path to the pppd program, default '/usr/sbin/pppd' on Linux
-#
-#ppp /usr/sbin/pppd
-
-# TAG: option
-#	Specifies the location of the PPP options file.
-#	By default PPP looks in '/etc/ppp/options'
-#
-option /etc/ppp/pptpd-options
-
-# TAG: debug
-#	Turns on (more) debugging to syslog
-#
-#debug
-
-# TAG: stimeout
-#	Specifies timeout (in seconds) on starting ctrl connection
-#
-# stimeout 10
-
-# TAG: noipparam
-#       Suppress the passing of the client's IP address to PPP, which is
-#       done by default otherwise.
-#
-#noipparam
-
-# TAG: logwtmp
-#	Use wtmp(5) to record client connections and disconnections.
-#
-logwtmp
-
-# TAG: bcrelay <if>
-#	Turns on broadcast relay to clients from interface <if>
-#
-#bcrelay eth1
-
-# TAG: localip
-# TAG: remoteip
-#	Specifies the local and remote IP address ranges.
-#
-#       Any addresses work as long as the local machine takes care of the
-#       routing.  But if you want to use MS-Windows networking, you should
-#       use IP addresses out of the LAN address space and use the proxyarp
-#       option in the pppd options file, or run bcrelay.
-#
-#	You can specify single IP addresses seperated by commas or you can
-#	specify ranges, or both. For example:
-#
-#		192.168.0.234,192.168.0.245-249,192.168.0.254
-#
-#	IMPORTANT RESTRICTIONS:
-#
-#	1. No spaces are permitted between commas or within addresses.
-#
-#	2. If you give more IP addresses than MAX_CONNECTIONS, it will
-#	   start at the beginning of the list and go until it gets 
-#	   MAX_CONNECTIONS IPs. Others will be ignored.
-#
-#	3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
-#	   you must type 234-238 if you mean this.
-#
-#	4. If you give a single localIP, that's ok - all local IPs will
-#	   be set to the given one. You MUST still give at least one remote
-#	   IP for each simultaneous client.
-#
-# (Recommended)
-#localip 192.168.0.1
-#remoteip 192.168.0.234-238,192.168.0.245
-# or
-#localip 192.168.0.234-238,192.168.0.245
-#remoteip 192.168.1.234-238,192.168.1.245
diff --git a/pptpd-1.3.3/debian/pptpd.init b/pptpd-1.3.3/debian/pptpd.init
deleted file mode 100644
index 6f6938d9..00000000
--- a/pptpd-1.3.3/debian/pptpd.init
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/sh
-# Copyright Rene Mayrhofer, ViaNova, 1999
-# This script is distibuted under the GPL
-
-PATH=/bin:/usr/bin:/sbin:/usr/sbin
-DAEMON=/usr/sbin/pptpd
-PIDFILE=/var/run/pptpd.pid
-FLAGS="defaults 50"
-
-case "$1" in
-  start)
-    echo -n "Starting PPTP Daemon: "
-    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON \
-    	-- < /dev/null > /dev/null
-    echo "pptpd."
-    ;;
-  stop)
-    echo -n "Stopping PPTP: "
-    start-stop-daemon --stop --quiet --pidfile $PIDFILE --exec $DAEMON
-    echo "pptpd."
-    ;;
-  reload)
-    echo "Not implemented."
-    ;;
-  force-reload|restart)
-    echo "Restarting PPTP: "
-    sh $0 stop
-    sh $0 start
-    ;;
-    status)
-    	if [ ! -r $PIDFILE ]; then
-            # no pid file, process doesn't seem to be running correctly
-            exit 3
-        fi
-    	PID=`cat $PIDFILE | sed 's/ //g'`
-        EXE=/proc/$PID/exe
-        if [ -x "$EXE" ] && 
-        	[ "`ls -l \"$EXE\" | cut -d'>' -f2,2 | cut -d' ' -f2,2`" = \
-        	"$DAEMON" ]; then
-            # ok, process seems to be running
-            exit 0
-        elif [ -r $PIDFILE ]; then
-            # process not running, but pidfile exists
-            exit 1
-        else
-            # no lock file to check for, so simply return the stopped status
-            exit 3
-        fi
-        ;;
-  *)
-    echo "Usage: /etc/init.d/pptpd {start|stop|restart|force-reload|reload}"
-    exit 1
-    ;;
-esac
-
-exit 0
diff --git a/pptpd-1.3.3/debian/pptpdconfig.pl b/pptpd-1.3.3/debian/pptpdconfig.pl
deleted file mode 100644
index 9d0452a8..00000000
--- a/pptpd-1.3.3/debian/pptpdconfig.pl
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/usr/bin/perl -w
-use strict;
-
-use Debian::DebConf::Client::ConfModule ':all';
-
-&pptpd("/etc/pptpd.conf", get("pptpd/localip"), get("pptpd/remoteip"));
-exit 0;
-
-sub pptpd ($$$) {
-
-	my $line;         # eine Zeile von IN
-	my $xxx;
-	my @lines;
-	my $count;
-	my $filename;
-	my $localIp;
-	my $remoteIp;
-	my $spaces;
-	my $foundlocal=0;
-	my $foundremote=0;
-	my $IDString="# generated by pptpdconfig";
-
-	$filename=shift;
-	$localIp=shift;
-	$remoteIp=shift;
-	print("Configuring pptpd to use localip(s) $localIp and remoteip(s) ");
-	print("$remoteIp ...\n");
-	
-	open(IN, "<$filename") || die("$filename not found.\n");
-	@lines=<IN>;
-	
-	open(OUT, ">${filename}.old");
-	print OUT @lines;
-	close OUT;
-	
-	$count=0;
-	while ($count<=$#lines)
-	{
-		$line=$lines[$count];
-		if ($line=~/^\s*localip/) {
-			if ($line=~/$IDString/)
-			{
-		   	($spaces)=($line=~/^(\s*)\S*.*/);
-				$lines[$count]="${spaces}localip $localIp $IDString\n";
-		 		$foundlocal=1;
-		 	}
-			else
-			{
-				$lines[$count]="# removed by pptpdconfig --- ".$lines[$count]."\n";
-			}
-		}
-		
-		if ($line=~/^\s*remoteip/) {
-			if ($line=~/$IDString/)
-			{
-		   	($spaces)=($line=~/^(\s*)\S*.*/);
-				$lines[$count]="${spaces}remoteip $remoteIp $IDString\n";
-		 		$foundremote=1;
-		 	}
-			else
-			{
-				$lines[$count]="# removed by pptpdconfig --- ".$lines[$count]."\n";
-			}
-		}
-		$count++;
-	}
-	if ($foundlocal==0)
-	{
-		push(@lines, "localip $localIp $IDString\n");
-	}
-	if ($foundremote==0)
-	{
-		push(@lines, "remoteip $remoteIp $IDString\n");
-	}
-	close IN;
-	print("done\n");
-	
-	open(OUT, ">$filename");
-	print OUT @lines;
-	close OUT;
-}
diff --git a/pptpd-1.3.3/debian/rules b/pptpd-1.3.3/debian/rules
deleted file mode 100755
index bca6b506..00000000
--- a/pptpd-1.3.3/debian/rules
+++ /dev/null
@@ -1,78 +0,0 @@
-#!/usr/bin/make -f
-# MAde with the aid of dh_make, by Craig Small
-# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess.
-# Some lines taken from debmake, by Cristoph Lameter.
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-build: build-stamp
-build-stamp:
-	dh_testdir
-
-	./configure --prefix=/usr --mandir=/usr/share/man \
-		    --with-libwrap --with-bcrelay
-	# Add here commands to compile the package.
-	$(MAKE) 
-
-	touch build-stamp
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp install-stamp
-
-	# Add here commands to clean up after the build process.
-	-$(MAKE) distclean
-
-	dh_clean
-
-install: install-stamp
-install-stamp: build-stamp
-	dh_testdir
-	dh_testroot
-	dh_clean -k
-	dh_installdirs
-
-	# Add here commands to install the package into debian/tmp.
-	$(MAKE) install prefix=`pwd`/debian/tmp/usr mandir=`pwd`/debian/tmp/usr/share/man 	
-	cp debian/pptpd.conf `pwd`/debian/tmp/etc 
-	cp debian/pptpd-options `pwd`/debian/tmp/etc/ppp
-	#cp debian/pptpdconfig.pl `pwd`/debian/tmp/usr/sbin
-	touch install-stamp
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
-#	dh_testversion
-	dh_testdir
-	dh_testroot
-	dh_installdocs
-#	mv `pwd`/debian/tmp/usr/share/doc/pptpd/html/*.txt `pwd`/debian/tmp/usr/share/doc/pptpd/
-	dh_installexamples
-#	dh_installmenu
-#	dh_installemacsen
-	dh_installinit
-#	dh_installcron
-	dh_installmanpages
-#	dh_installdebconf
-#	dh_undocumented
-	dh_installchangelogs -k ChangeLog
-	dh_strip
-	dh_compress
-	dh_fixperms
-	dh_installdeb
-	dh_shlibdeps
-	dh_gencontrol
-#	dh_makeshlibs
-	dh_md5sums
-	dh_builddeb
-
-source diff:                                                                  
-	@echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary
diff --git a/pptpd-1.3.3/debian/templates b/pptpd-1.3.3/debian/templates
deleted file mode 100644
index e2a6b488..00000000
--- a/pptpd-1.3.3/debian/templates
+++ /dev/null
@@ -1,75 +0,0 @@
-Template: pptpd/localip
-Type: string
-_Description: Local IP address of the virtual connections
- Specify the local IP address for the virtual connections.
- .
- Please note that any address works as long as the local machine takes care
- of the routing. But if you want to use MS-Windows networking, you should
- use an IP address out of the LAN address space.
- .
- You can give only one address or you can give multiple addresses if you
- want to, although they are really not needed. Multiple addresses can be
- given as either "10.0.0.1,10.0.0.2,10.0.0.3" or "10.0.0.1-3". No spaces
- should be used between commas or within addresses.
-
-Template: pptpd/remoteip
-Type: string
-_Description: A list of remote IP addresses for the virtual connections.
- Specify the remote IP addresses for the virtual connections.
- .
- Please note that any addresses work as long as the local machine takes
- care of the routing. But if you want to use MS-Windows networking, you
- should use IP addresses out of the LAN address space.
- .
- You have to give one address for every concurrent connection. This will
- depend on how many clients you expect to be online at the same time.
- Multiple addresses can be given as either "10.0.0.1,10.0.0.2,10.0.0.3" or
- "10.0.0.1-3". No spaces should be used between commas or within addresses.
-
-Template: pptpd/netmask
-Type: string
-_Description: Netmask used for virtual connections.
- If you use IP addresses from the LAN address space, please use the same
- netmask as on your LAN.
-
-Template: pptpd/wins
-Type: string
-_Description: IP address of your WINS server.
- A WINS server is used for browsing available Computers in MS-Windows
- networking. This address is transmitted to the clients,
-
-Template: pptpd/dns
-Type: string
-_Description: IP address of your DNS server.
- This address is transmitted to the clients.
-
-Template: pptpd/mppe
-Type: boolean
-Default: true
-_Description: Do you want to use MPPE data encryption ?
- The recommended way is to use the data encryption as it is one of the main
- benefits of a VPN. When you want to use MPPE (Microsoft Point-to-Point
- Encryption), you also  have to use CHAPMSv2 for authentication. . Note
- that you have to install the modified ppp packages if you want to use this
- data encryption.
-
-Template: pptpd/no-mppe
-Type: note
-_Description: Warning: data encryption is disabled.
- All data transferred between the local network and the client will be
- transmitted without encryption ! This is a security hole.
- .
- You have been warned. Now you loose your product warranty :)
-
-Template: pptpd/authentication
-Type: select
-_Choices: pap, chap, chapms, chapms-v2
-Default: chap
-_Description: Which authentication method do you want to use ?
- Possible authentication methods are: - PAP - CHAP - CHAP with Microsoft
- extensions - CHAP with Microsoft extensions v2
- .
- The recommended authentication method is one of the CHAP methods. However,
- you have to use a separate database (/etc/ppp/chap-secrets) if you want to
- use these. If you use PAP, you can use the standard system passwords when
- the ppp-pam package is installed.