diff options
Diffstat (limited to 'pptpd-1.3.3/samples/pptpd.conf')
| -rw-r--r-- | pptpd-1.3.3/samples/pptpd.conf | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/pptpd-1.3.3/samples/pptpd.conf b/pptpd-1.3.3/samples/pptpd.conf new file mode 100644 index 00000000..4abe15b7 --- /dev/null +++ b/pptpd-1.3.3/samples/pptpd.conf @@ -0,0 +1,100 @@ +############################################################################### +# $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $ +# +# Sample Poptop configuration file /etc/pptpd.conf +# +# Changes are effective when pptpd is restarted. +############################################################################### + +# TAG: ppp +# Path to the pppd program, default '/usr/sbin/pppd' on Linux +# +#ppp /usr/sbin/pppd + +# TAG: option +# Specifies the location of the PPP options file. +# By default PPP looks in '/etc/ppp/options' +# +option /etc/ppp/options.pptpd + +# TAG: debug +# Turns on (more) debugging to syslog +# +#debug + +# TAG: stimeout +# Specifies timeout (in seconds) on starting ctrl connection +# +# stimeout 10 + +# TAG: noipparam +# Suppress the passing of the client's IP address to PPP, which is +# done by default otherwise. +# +#noipparam + +# TAG: logwtmp +# Use wtmp(5) to record client connections and disconnections. +# +logwtmp + +# TAG: bcrelay <if> +# Turns on broadcast relay to clients from interface <if> +# +#bcrelay eth1 + +# TAG: delegate +# Delegates the allocation of client IP addresses to pppd. +# +# Without this option, which is the default, pptpd manages the list of +# IP addresses for clients and passes the next free address to pppd. +# With this option, pptpd does not pass an address, and so pppd may use +# radius or chap-secrets to allocate an address. +# +#delegate + +# TAG: connections +# Limits the number of client connections that may be accepted. +# +# If pptpd is allocating IP addresses (e.g. delegate is not +# used) then the number of connections is also limited by the +# remoteip option. The default is 100. +#connections 100 + +# TAG: localip +# TAG: remoteip +# Specifies the local and remote IP address ranges. +# +# These options are ignored if delegate option is set. +# +# Any addresses work as long as the local machine takes care of the +# routing. But if you want to use MS-Windows networking, you should +# use IP addresses out of the LAN address space and use the proxyarp +# option in the pppd options file, or run bcrelay. +# +# You can specify single IP addresses seperated by commas or you can +# specify ranges, or both. For example: +# +# 192.168.0.234,192.168.0.245-249,192.168.0.254 +# +# IMPORTANT RESTRICTIONS: +# +# 1. No spaces are permitted between commas or within addresses. +# +# 2. If you give more IP addresses than the value of connections, +# it will start at the beginning of the list and go until it +# gets connections IPs. Others will be ignored. +# +# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238, +# you must type 234-238 if you mean this. +# +# 4. If you give a single localIP, that's ok - all local IPs will +# be set to the given one. You MUST still give at least one remote +# IP for each simultaneous client. +# +# (Recommended) +#localip 192.168.0.1 +#remoteip 192.168.0.234-238,192.168.0.245 +# or +#localip 192.168.0.234-238,192.168.0.245 +#remoteip 192.168.1.234-238,192.168.1.245 |