summaryrefslogtreecommitdiff
path: root/accel-pppd/extra
AgeCommit message (Collapse)Author
2024-08-23ci: run tests in alpine vmSergey V. Lobanov
Alpine Linux uses musl libc so now accel-ppp is tested under musl Currently, Alpine Linux doesn't provide a link to the latest stable version so direct link to Alpine 3.20 is used Improved musl support might be used to run on platforms like openwrt without additional patches
2024-04-29snmp: fix compatibility with net-snmp 5.9.4+ (issue #136)Sergey V. Lobanov
related net-snmp change: https://github.com/net-snmp/net-snmp/commit/a2cb167514ac0c7e1b04e8f151e0b015501362e0 Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
2024-03-10Add safeguards to parse_gw_ip_address helper functionsDenys Fedoryshchenko
In case of invalid configuration we might get stack overflow with unexpected consequences. Signed-off-by: Denys Fedoryshchenko <denys.f@collabora.com>
2024-03-09ippool: use gw-ip-address for ppp even if mask settedDmitriy Eshenko
2022-11-15SNMP: Fix previous migration to 64 bit countersDmitriy Eshenko
2022-11-01Add PACKETS_SENT and PACKETS_RCVD to the pppd-compat environment.Stephan Brunner
2022-11-01Use 64-bit interface statistics rather than doing custom 32-bit overflow ↵Stephan Brunner
handling. When a link has a relatively high throughput, the 32-bit packet and byte counters could overflow multiple times between accounting runs. To accommodate this limitation, directly use 64-bit interface statistics. This also gets rid of the internal giga-word counters.
2022-01-13Check if ipv6 dp availible before answerDmitriyEshenko
2021-04-08ippool, ipv6pool: fix iterating over circular poolsVladislav Grishenko
2021-04-07ippool: fix next pool handlingVladislav Grishenko
* fix no next pool when it was defined after referencing: 192.168.1.2-255,name=pool1,next=pool2 192.168.2.2-255,name=pool2 * fix UB when next pool was set to same pool: 192.168.1.2-255,name=pool1,next=pool1 * add warning about empty/not defined next pools
2021-04-07ipv6pool: fix next pool handlingVladislav Grishenko
* fix no next pool when subsequent pool prefix was defined w/o next pool: fc00:0:3::/48,64,name=pool1,next=pool2 fc00:0:4::/48,64,name=pool1 * fix no next pool when it was defined after referencing: fc00:0:3::/48,64,name=pool1,next=pool2 fc00:0:4::/48,64,name=pool2 * fix UB when next pool was set to same pool: fc00:0:3::/48,64,name=pool1,next=pool1 * add warning about empty/not defined next pools
2021-03-20Fixed some errors found by valgrind and pvs-studio (#11)[anp/hsw]
* Fix errors found by valgrind ==12312== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s) ==12312== at 0x486CCF0: sendmsg (in /lib/libpthread-2.22.so) ==12312== by 0x12F57F: rtnl_talk (libnetlink.c:316) ==12312== by 0x132DA3: genl_resolve_mcg (genl.c:52) ==12312== by 0x484E1CB: init (vlan_mon.c:528) ==12312== by 0x484CDC0: vlan_mon_register_proto (vlan_mon.c:48) ==12312== by 0x510B763: load_vlan_mon (pppoe.c:1914) ==12312== by 0x510BFF2: load_config (pppoe.c:2064) ==12312== by 0x510C22A: pppoe_init (pppoe.c:2108) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) ==12312== Address 0xbedacdd8 is on thread 1's stack ==12312== in frame #2, created by genl_resolve_mcg (genl.c:23) ==12312== 15 bytes in 1 blocks are definitely lost in loss record 352 of 836 ==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so) ==12312== by 0x12C30C: init (telnet.c:769) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) ==12312== ==12312== 15 bytes in 1 blocks are definitely lost in loss record 353 of 836 ==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so) ==12312== by 0x12D60A: init (tcp.c:392) ==12312== by 0x483E9EB: triton_load_modules (triton.c:704) ==12312== by 0x1384B2: main (main.c:339) * Fix another warnings by cppcheck [accel-pppd/ctrl/ipoe/arp.c:256]: (error) Uninitialized variable: n [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ctrl/pppoe/pppoe.c:738]: (warning) Possible null pointer dereference [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/libnetlink/libnetlink.c:515]: (warning) Possible null pointer dereference [accel-pppd/ppp/ipv6cp_opt_intfid.c:185]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'. [accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'. * Suppress compiler warnings * Fix locking errors /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 279 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 279, 249. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 333 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 333, 315. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 422 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 422, 372. /opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 488 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 488, 468. /opt/pvs/accel-ppp/accel-pppd/triton/mempool.c 119 warn V1020 The function exited without calling the 'pthread_spin_unlock' function. Check lines: 119, 116. * Fix array len errors /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 75 warn V557 Array underrun is possible. The value of 'len - 1' index could reach -1. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 76 warn V557 Array underrun is possible. The value of '-- len' index could reach -1. * Fix possible memory leaks /opt/pvs/accel-ppp/accel-pppd/radius/radius.c 936 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible. /opt/pvs/accel-ppp/accel-pppd/radius/serv.c 622 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 144 err V773 The function was exited without releasing the 'raw' pointer. A memory leak is possible. * Fix unsafe code /opt/pvs/accel-ppp/accel-pppd/cli/tcp.c 364 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 338, 364. /opt/pvs/accel-ppp/accel-pppd/cli/telnet.c 701 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 675, 701. /opt/pvs/accel-ppp/accel-pppd/extra/ippool.c 241 err V614 Potentially uninitialized pointer 'pos' used. /opt/pvs/accel-ppp/accel-pppd/radius/dict.c 165 err V614 Uninitialized pointer 'parent_items' used. * Remove duplicate code /opt/pvs/accel-ppp/accel-pppd/radius/serv.c 202 warn V547 Expression 'ts.tv_sec < req->serv->fail_time' is always false. * Fix treating signed bool variables as unsigned * Add nullptr checking /opt/pvs/accel-ppp/accel-pppd/ipv6/dhcpv6.c 886 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 886, 890. /opt/pvs/accel-ppp/accel-pppd/ipv6/nd.c 479 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 479, 483. /opt/pvs/accel-ppp/accel-pppd/radius/auth.c 152 err V595 The 'rpd->auth_ctx' pointer was utilized before it was verified against nullptr. Check lines: 152, 154. /opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 114 err V595 The 'cur_sect' pointer was utilized before it was verified against nullptr. Check lines: 114, 117. * Add logging of exit conditions * Clarify calculation [accel-pppd/ppp/ccp_mppe.c:281]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:282]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:283]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:284]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:285]: (style) Clarify calculation precedence for '&' and '?'. [accel-pppd/ppp/ccp_mppe.c:286]: (style) Clarify calculation precedence for '&' and '?'. [drivers/ipoe/ipoe.c:307]: (style) Clarify calculation precedence for '&' and '?'. * Fix void calculations [accel-pppd/ctrl/pppoe/disc.c:211]: (portability) 'pkt' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ctrl/pptp/pptp.c:150]: (portability) 'buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/acct.c:37]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/auth.c:35]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/auth.c:79]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:43]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:47]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:57]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:65]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/dm_coa.c:97]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/radius/serv.c:364]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:115]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:122]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/triton/mempool.c:276]: (portability) 'ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. * Fix void part 2 [accel-pppd/ipv6/dhcpv6.c:844]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ipv6/nd.c:199]: (portability) '(void*)dnsslinfo' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. [accel-pppd/ipv6/nd.c:432]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined. * Fix null pointer dereference [accel-pppd/ctrl/ipoe/ipoe.c:2048]: (warning) Possible null pointer dereference: eth [accel-pppd/ctrl/ipoe/ipoe.c:2049]: (warning) Possible null pointer dereference: iph * Remove redundant check /opt/pvs/accel-ppp/accel-pppd/ctrl/l2tp/packet.c 656 warn V547 Expression 'attr->length <= 16' is always false. * PR fixes * PR fixes 2
2021-03-17Merge branch 'master' of github.com:xebd/accel-pppDmitry Kozlov
2021-03-13Fix some errors and warnings found by cppcheck[anp/hsw]
[accel-pppd/ctrl/ipoe/ipoe.c:4054]: (style) A pointer can not be negative so it is either pointless or an error to check if it is not. [accel-pppd/logs/log_syslog.c:148]: (error) Array 'facility_name[9]' accessed at index 35, which is out of bounds. [accel-pppd/lua/session.c:274]: (error) Common realloc mistake: 'mods' nulled but not freed upon failure [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 2) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 3) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 4) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:114]: (warning) %u in format string (no. 5) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 2) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 3) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 4) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/extra/ippool.c:141]: (warning) %u in format string (no. 5) requires 'unsigned int *' but the argument type is 'int *'. [accel-pppd/main.c:97]: (warning) %d in format string (no. 1) requires 'int *' but the argument type is 'unsigned int *'. [accel-pppd/radius/radius.c:687] -> [accel-pppd/radius/radius.c:690]: (warning) Possible null pointer dereference: rpd - otherwise it is redundant to check it against null. [accel-pppd/radius/serv.c:805] -> [accel-pppd/radius/serv.c:829]: (warning) Possible null pointer dereference: ptr2 - otherwise it is redundant to check it against null. [accel-pppd/radius/serv.c:813] -> [accel-pppd/radius/serv.c:829]: (warning) Possible null pointer dereference: ptr2 - otherwise it is redundant to check it against null. [accel-pppd/radius/serv.c:823] -> [accel-pppd/radius/serv.c:829]: (warning) Possible null pointer dereference: ptr2 - otherwise it is redundant to check it against null.
2021-02-06fix build with non-portable _SC_PAGE_SIZEVladislav Grishenko
2020-09-13radius: keep vendor & attr numbers in orderVladislav Grishenko
2020-09-06auth/chap-secrets/dhcpv4: fix big-endian arch supportVladislav Grishenko
2020-05-21ipv6pool: fix delegated pool ignorance w/o address poolVladislav Grishenko
2020-01-11ipv6pool: add per-proto ipv6-pool and ipv6-pool-delegate optionsVladislav Grishenko
also, disable ipv6 pools via chap-secrets, need to find another syntax for it, may be with comments.
2020-01-10ipv6pool/radius: implement named ipv6 poolsVladislav Grishenko
default stateful ipv6 address & prefix radius attrs are per-rfc6911: 171 Delegated-IPv6-Prefix-Pool 172 Stateful-IPv6-Address-Pool the single pool name from chap-secret file pool is shared for ipv4/ipv6/ipv6 dp, new config syntax TBD. per-proto pool names are still for ipv4 only, new config syntax TBD.
2019-05-15ippool: exclude gw-ip-address from address poolDmitry Kozlov
2019-05-15pppd_compat: write human readable values of IPv6 address to radattr fileDmitry Kozlov
2019-03-08ippool: always initialize mask = 0Dmitry Kozlov
2018-11-03pppd_compat: fix handling of fork() failuresGuillaume Nault
When accel-ppp is under stress (for example because of massive disconnections) it may enter a state where no session could be created or destroyed anymore. This happens when at least one of the pppd_compat fork() fail. In this case, the error code path doesn't unlock the sigchld handler, which prevents it from running the completion callbacks of running scripts. If the "fork-limit" option is used, failure to call the completion callback will prevent other scripts from running. This will block setting up and tearing down sessions, as those will wait indefinitely for their pppd_compat scripts to run. Therefore, we have to unlock the sigchld handler when fork() fails. We also need to call fork_queue_wakeup(), because the previous check_fork_limit() call already took one reference in the fork limit. Finally, ev_ses_pre_up() is a bit special because it has to tear the session down if the ip-pre-up script failed. Therefore it also has to call ap_session_terminate() upon fork() failures. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
2018-10-26Merge branch 'master' of https://github.com/xebd/accel-pppDmitry Kozlov
2018-10-25fix gateway address setup fail due memory corruptionVladislav Grishenko
log: libnetlink: RTNETLINK answers: Invalid argument ppp0: f7bb00a79ef667d2: failed to set IPv4 address: Invalid argument ipaddr_add_peer() called only with mask equeal 0 or 32, but w/o zero-allocated structs it contans garbage in some cases. so, instead ipaddr_add() was called with wrong mask value. also, init chap-secrets mask for the same reason.
2018-10-23ipv6: fix IPv6 processing of sessions that only have only a link-local addressGuillaume Nault
Several modules assume that if ses->ipv6 is set, then ses->ipv6->addr_list contains at least one element. But this is not true if ipv6 was allocated by the pseudo ipdb backend of ipv6cp (ipv6cp_opt_intfid.c). That is, if the PPP session only has an automatic link-local address. This leads modules like pppd-compat and dhcpv6 to access invalid memory when trying to retrieve the IPv6 address of a PPP session. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
2018-07-31Merge branch 'master' of ssh://git.code.sf.net/p/accel-ppp/codeDmitry Kozlov
2018-06-24pppd_compat: fix indentation in ev_radius_coa()Guillaume Nault
Missing tab was misleading. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
2018-06-24pppd_compat: run scripts in the PPP device netnsGuillaume Nault
If the PPP device is set up into a specific network namespace, all the configuration that goes with it belongs to this same netns. Therefore, we need to run the up/down scripts in that namespace too. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
2018-06-24pppd_compat: fix argv[0] when calling ip-pre-upGuillaume Nault
The first argument passed to the ip-pre-up script, was mistakenly set to the value of ip-up. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
2018-06-04sstp: snmp: add missed files, fix 0d454ad7102506ecd12a36239f6604f7e4b57aaeVladislav Grishenko
2018-06-03sstp: add snmp supportVladislav Grishenko
2018-02-05pppd_compat: call ip-down even if ip-up is not specifiedDmitry Kozlov
2018-01-15cmake: add error messages if postgresql or snmp libraries not foundDmitry Kozlov
2018-01-13ipv6: consolidate and fix interface-id address generation for non-/128Vladislav Grishenko
2017-12-25ipv6pool: added gw-ip6-address option and special handling for /128 prefixesDmitry Kozlov
If pool specified with /128 prefix length, then initialize intf_id by gw_ip6_address and peer_intf_id by generated pool address.
2017-12-20ippool: fixed parsing /32 rangesDmitry Kozlov
2017-12-14ippool: implemented next pool supportDmitry Kozlov
config changes: [ip-pool] x.x.x.x/mask,name=pool1 y.y.y.y/mask,name=pool2,next=pool1
2017-12-07pppd_compat: mark session started if ip-up handler calledDmitry Kozlov
2017-12-07pppd_compat: fixed bug caused fork queue to stallDmitry Kozlov
2017-12-07chap-secrets: assume 4th field as pool nameVladislav Grishenko
Simplify previous commit, if 4th field isn't empty and doesn't start with reserved chars (*-!), assume it as pool name. Also, fix build warn without OPENSSL.
2017-12-06chap-secrets: allow to use pool name instead of address to specify ipv4 poolVladislav Grishenko
Chap-secrets' ipdb uses 4th field as static peer ipv4 address. With no radius and multiple same username sessions, it's impossible to use non-default pool for such sessions. Abuse chap-secret's 4th field as pool=name to specify session's pool name. With ippool module loaded after chap-secrets (default order), it will be used for allocation from the specified poll name. Compatibility considerations: * pppd will skip 'pool=*' with warn 'unknown host in auth. address list' same as 5th field - shaper, because starting from 4th field pppd parse list of value. so, no new effects here. * previous versions of accel-ppp will parse 'pool=*' as empty address. * with no 'pool=*' in chap-secrets or with no chap-secrets loaded, no behavior change. * with no ippool loaded, session will get no peer address. * with ippool loaded before chap-secrets, chap-secrets's ipdb will not be used, therefore neither ip addess not pool name will has no effect. * if chap-secrets' pool is invalid or not found, default pool will be used by ippool or address came from radius. * chap-secret's pool name might override pool came from radius, if radius module is loaded after chap-secrets and no address came from radius.
2017-12-05net-snmp: fixed crash on table requestDmitry Kozlov
2017-12-05ippool: rewrited parsersDmitry Kozlov
2017-12-05ipv6: nd: fix interface id addresses generation for prefixes > /64Vladislav Grishenko
2017-10-16pppd_compat: do not call ip-down if session was not startedDmitry Kozlov
2017-10-12pppd-compat: implemented fork-limitDmitry Kozlov
[ppppd-compat] fork-limit=N Specifies number of simultaneously running background processes.
2017-10-11pppd_compat: various improvemmentsDmitry Kozlov
implemented coinfig reload changed default value of ip-xxx scripts to be NULL (disabled)
2017-07-04support for openssl-1.1Dmitry Kozlov
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 13:32:39 +0000