.TH ACCEL-CMD 1 "January 2013"
.SH NAME
accel-cmd \- send commands to accel-ppp
.SH SYNOPSIS
.B accel-cmd
.RB [ -n "] [" -4 "] [" -6 "] [" -f " \fIFAMILY\fR] [" -H " \fIHOST\fR]"
.RB [ -p " \fIPORT\fR] [" -i " \fITIMEOUT\fR]"
.RI "[--] [" COMMAND "]"
.SH DESCRIPTION
.BR accel-cmd " is a client for accel-ppp's " cli " module. It sends"
.IR COMMAND "s to accel-ppp's tcp interface and displays the result on"
.RI "standard output. If no " COMMAND " is supplied, then"
.BR accel-cmd " reads and sends data from its standard input."
.SH OPTIONS
.TP
.BR \-f " \fIFAMILY\fR, " \-\-family "=\fIFAMILY\fR"
.RI "Connect to " HOST " using the given protocol family. Supported families"
.RB "are " inet " (IPv4), " inet6 " (IPv6) and " unspec " (automatic)."
.TP
.B \-4
.RB "Shorcut for " "--family=inet" .
.TP
.B \-6
.RB "Shorcut for " "--family=inet6" .
.TP
.BR \-H " \fIHOST\fR, " \-\-host "=\fIHOST\fR"
.RB "Set the host name or IP address to connect to. Defaults to " localhost .
.TP
.BR \-p " \fIPORT\fR, " \-\-port "=\fIPORT\fR"
Set the service name or port number on which connection should be done.
.RB "Defaults to " 2001 .
.TP
.BR \-n ", " \-\-numeric
.RI "Inhibit name resolution of " HOST " and " PORT ". In this case,"
.IR HOST " must be an IP address and " PORT " a numeric port number."
.TP
.BR \-t " \fITIMEOUT\fR, " \-\-timeout "=\fITIMEOUT\fR"
.RB "Set an inactivity timeout."
.IR TIMEOUT " must be an integer and may be immediately followed by a time"
.RB "unit. Supported units are " s " (seconds), " ms " (milliseconds) and " us
.RB "(microseconds). The default unit is " s "."
.RI "If this option is not supplied, or if " TIMEOUT " is zero, then no"
timeout is set.
.TP
.BR \-v ", " \-\-verbose
Verbose output.
.TP
.BR \-V ", " \-\-version
Display version number and exit.
.TP
.BR \-h ", " \-\-help
Display help message and exit.
.SH EXAMPLES
.TP
Send the "show sessions" command to accel-ppp on localhost and display \
the result on standard output:
$ accel-cmd show sessions
.TP
Execute commands stored in file "cmds":
$ accel-cmd < cmds
.TP
Same as above, but send commands to another host and timeout after \
1.5 seconds of inactivity:
$ accel-cmd --timeout 1500ms --host accelppp.example.com < cmds
.SH EXIT STATUS
.TP
0
success,
.TP
1
invalid command line option,
.TP
2
invalid parameter given to a command line option,
.TP
3
connection to accel-ppp failed,
.TP
4
timeout expired,
.TP
5
\fICOMMAND\fR too big (standard input may be used instead \
for sending big amounts of data),
.TP
100 (or above)
internal error.