| Age | Commit message (Collapse) | Author |
|---|
|
|
|
refer #6 for modre details.
|
|
|
|
usually there's no need to have per-proto limitation, since the need
of max starting limitation affects the whole server, not particular
protocol only.
|
|
|
|
default stateful ipv6 address & prefix radius attrs are per-rfc6911:
171 Delegated-IPv6-Prefix-Pool
172 Stateful-IPv6-Address-Pool
the single pool name from chap-secret file pool is shared for
ipv4/ipv6/ipv6 dp, new config syntax TBD.
per-proto pool names are still for ipv4 only, new config syntax TBD.
|
|
If multisession behavior is managed by accel-ppp and Radius server
ignores the case of the User-Name attribute, it might be required to
ignore the case in accel-ppp to prevent multiple session with
different letter cases.
|
|
let check-ip setting from [ppp]/[ipoe] sections has prio over [common]
for compatibility with older configs.
|
|
sstp: implement ssl-protocol option and add unsupported features logging
|
|
|
|
|
|
possible protocols are ssl2, ssl3, tls1, tls1.1, tls1.2 and tls1.3,
but support does depend on openssl library.
defaults are up to openssl library w/o ssl2/ssl3.
|
|
|
|
Add info [ipoe]session-timeout and [ipoe]idle-timeout to accel-ppp.conf.5
|
|
Add info [modules]connlimit to accel-ppp.conf.5
|
|
Fix: ipv6-dns accel-ppp.conf.5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
following bind option formats are valid:
bind=x.x.x.x
bind=2001:db8::1
bind=unix:/var/run/sstp.socket
bind=unix:@sstp
port option is meaningful for ipv4 and ipv6 only
|
|
currently the only ssl value is supported
|
|
|
|
|
|
new config options:
[ipoe]
weight=N - global weight
interface=ethX,weight=N - per-interface weight
How it works:
On reception of DHCPDISCOVER accel-ppp sends broadcast DHCP message to port 67 with same xid and add special vendor-specific option
where encodes its current session count multipled by weight.
On reception of such message accel-ppp searches session with same xid and compares weight.
If received weight is less than session's weight then it terminates this session.
per-interface weight=0 has special meaning as backup (fail-over) interface, f.e. it terminates session on any received weight.
By default weight based load balancing is disabled.
To enable need to specify global or/and per-interface weight.
|
|
If pool specified with /128 prefix length, then initialize intf_id by gw_ip6_address and peer_intf_id by generated pool address.
|
|
config changes:
[ip-pool]
x.x.x.x/mask,name=pool1
y.y.y.y/mask,name=pool2,next=pool1
|
|
Reuse exsisting radius functionality and allow set iterface name
template for pppoe/pptp/l2tp, '%d' specification will be replaced
automagically to the next available index by kernel.
PPP interface rename allows to easy differ client's interfaces from
the other ppp ones, for example, with just netfilter interface rules.
Example:
[pptp]
ifname=pptp%d will produce pptp0, pptp1, ...
|
|
|
|
|
|
accept-any-service to provide backward compatibility with old accel-ppp
|
|
If set to 1 then allocate unit (interface) before authorization, so Nas-Port and Nas-Port-Id would be defined in Access-Request phase
|
|
If start=auto is specified then accel-pppd automatically starts session with username = interface name on shared=0 interfaces.
Use it with conjuction vlan_mon. So any packet may start session.
|
|
local-net is used to filter incomming packets which may start UP session
|
|
|
|
|
|
|
|
This option specifies value of Calling-Station-Id value.
Available options are 'mac' and 'ip'.
|
|
Default behaviour of accel-ppp when it receives DHCP request with same Option 82 but different MAC address
is termination of old session (with previous MAC address).
This option can turn off such behaviour, so multiple sessions with same Option 82 but different MAC may coesist.
|
|
|
|
If password=csid then password will we same as Calling-Station-Id.
|
|
If specified then fwmark filters will be installed to bypass shaper
|
