[modules] #path=/usr/local/lib/accel-ppp log_file #log_syslog #log_tcp #log_pgsql pptp l2tp #pppoe auth_mschap_v2 auth_mschap_v1 auth_chap_md5 auth_pap radius ippool sigchld pppd_compat #shaper #shaper_tbf (obsolete) #chap-secrets #net-snmp #logwtmp #connlimit #ipv6_nd #ipv6_dhcp #ipv6pool [core] log-error=/var/log/accel-ppp/core.log thread-count=4 [ppp] verbose=1 min-mtu=1280 mtu=1400 mru=1400 #ccp=0 #sid-case=upper #check-ip=0 #single-session=replace #mppe=require ipv4=require ipv6=deny ipv6-intf-id=0:0:0:1 ipv6-peer-intf-id=0:0:0:2 ipv6-accept-peer-intf-id=1 lcp-echo-interval=20 #lcp-echo-failure=3 lcp-echo-timeout=120 #unit-cache=1000 [auth] #any-login=0 #noauth=0 [pptp] #echo-interval=30 verbose=1 [pppoe] interface=eth0 #interface=eth1,padi-limit=1000 #ac-name=xxx #service-name=yyy #pado-delay=0 #pado-delay=0,100:100,200:200,-1:500 #ifname-in-sid=called-sid #tr101=1 #padi-limit=0 verbose=1 [l2tp] #dictionary=/usr/local/share/accel-ppp/l2tp/dictionary #hello-interval=60 #timeout=60 #rtimeout=5 #retransmit=5 #host-name=accel-ppp #dir300_quirk=0 #secret= verbose=1 [dns] #dns1=172.16.0.1 #dns2=172.16.1.1 [radius] #dictionary=/usr/local/share/accel-ppp/radius/dictionary nas-identifier=accel-ppp nas-ip-address=127.0.0.1 gw-ip-address=192.168.100.1 #auth-server=127.0.0.1:1812,testing123 (obsolete) #acct-server=127.0.0.1:1813,testing123 (obsolete) #server=127.0.0.1,testing123 (obsolete) server=127.0.0.1,testing123,auth-port=1812,acct-port=1813,req-limit=0,fail-time=0 dae-server=127.0.0.1:3799,testing123 verbose=1 #timeout=3 #max-try=3 #acct-timeout=120 #acct-delay-time=0 [client-ip-range] 10.0.0.0/8 [ip-pool] gw-ip-address=192.168.0.1 #vendor=Cisco #attr=Cisco-AVPair attr=Framed-Pool 192.168.0.2-255 192.168.1.1-255,pool1 192.168.2.1-255,pool2 192.168.3.1-255,pool3 192.168.4.0/24 [log] log-file=/var/log/accel-ppp/accel-ppp.log log-emerg=/var/log/accel-ppp/emerg.log log-fail-file=/var/log/accel-ppp/auth-fail.log #log-debug=/dev/stdout #syslog=accel-pppd,daemon #log-tcp=127.0.0.1:3000 copy=1 #color=1 #per-user-dir=per_user #per-session-dir=per_session #per-session=1 level=3 [log-pgsql] conninfo=user=log log-table=log [pppd-compat] #ip-pre-up=/etc/ppp/ip-pre-up ip-up=/etc/ppp/ip-up ip-down=/etc/ppp/ip-down ip-change=/etc/ppp/ip-change radattr-prefix=/var/run/radattr verbose=1 [chap-secrets] gw-ip-address=192.168.100.1 #chap-secrets=/etc/ppp/chap-secrets [shaper] #attr=Filter-Id #down-burst-factor=0.1 #up-burst-factor=1.0 #latency=50 #mpu=0 #r2q=10 #quantum=1500 #cburst=1534 #ifb=ifb0 up-limiter=police down-limiter=tbf #leaf-qdisc=sfq perturb 10 verbose=1 #tbf is obsolete, use shaper module #[tbf] #attr=Filter-Id #down-burst-factor=0.1 #up-burst-factor=1.0 #latency=50 [cli] telnet=127.0.0.1:2000 tcp=127.0.0.1:2001 #password=123 [snmp] master=0 agent-name=accel-ppp [connlimit] limit=10/min burst=3 timeout=60 [ipv6-pool] fc00:0:1::/48,64 delegate=fc00:1::/36,48 [ipv6-dns] #fc00:1::1 #fc00:1::2 #fc00:1::3 #dnssl=suffix1.local.net #dnssl=suffix2.local.net. [ipv6-dhcp] verbose=1 pref-lifetime=604800 valid-lifetime=2592000 route-via-gw=1