diff options
| author | Christian Poessinger <christian@poessinger.com> | 2021-06-22 18:34:21 +0200 |
|---|---|---|
| committer | Christian Poessinger <christian@poessinger.com> | 2021-06-22 18:34:58 +0200 |
| commit | 47604c76587cc6cb7742e91940de2f40ad6d7eb0 (patch) | |
| tree | 719d4d06886b6c4855e3940781778a33ca4f19d3 /data/mibs/OSPF-MIB.txt | |
| parent | debd7996f89b01fa8d3584efbcda9a5675ee4344 (diff) | |
| download | vyos-1x-47604c76587cc6cb7742e91940de2f40ad6d7eb0.tar.gz vyos-1x-47604c76587cc6cb7742e91940de2f40ad6d7eb0.zip | |
snmp: T3606: Install MIBs into well known location
FRR also expects the MIBs in /usr/share/snmp/mibs
Diffstat (limited to 'data/mibs/OSPF-MIB.txt')
| -rw-r--r-- | data/mibs/OSPF-MIB.txt | 2723 |
1 files changed, 0 insertions, 2723 deletions
diff --git a/data/mibs/OSPF-MIB.txt b/data/mibs/OSPF-MIB.txt deleted file mode 100644 index de7d03f5e..000000000 --- a/data/mibs/OSPF-MIB.txt +++ /dev/null @@ -1,2723 +0,0 @@ -OSPF-MIB DEFINITIONS ::= BEGIN - - IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, - Integer32, IpAddress - FROM SNMPv2-SMI - TEXTUAL-CONVENTION, TruthValue, RowStatus - FROM SNMPv2-TC - MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF - mib-2 FROM RFC1213-MIB; - --- This MIB module uses the extended OBJECT-TYPE macro as --- defined in [9]. - -ospf MODULE-IDENTITY - LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 - ORGANIZATION "IETF OSPF Working Group" - CONTACT-INFO - " Fred Baker - Postal: Cisco Systems - 519 Lado Drive - Santa Barbara, California 93111 - Tel: +1 805 681 0115 - E-Mail: fred@cisco.com - - Rob Coltun - Postal: RainbowBridge Communications - Tel: (301) 340-9416 - E-Mail: rcoltun@rainbow-bridge.com" - DESCRIPTION - "The MIB module to describe the OSPF Version 2 - Protocol" - ::= { mib-2 14 } - --- The Area ID, in OSPF, has the same format as an IP Address, --- but has the function of defining a summarization point for --- Link State Advertisements - -AreaID ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "An OSPF Area Identifier." - SYNTAX IpAddress - - --- The Router ID, in OSPF, has the same format as an IP Address, --- but identifies the router independent of its IP Address. - -RouterID ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "A OSPF Router Identifier." - SYNTAX IpAddress - - --- The OSPF Metric is defined as an unsigned value in the range - -Metric ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The OSPF Internal Metric." - SYNTAX Integer32 (0..'FFFF'h) - -BigMetric ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The OSPF External Metric." - SYNTAX Integer32 (0..'FFFFFF'h) - --- Status Values - -Status ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The status of an interface: 'enabled' indicates that - it is willing to communicate with other OSPF Routers, - while 'disabled' indicates that it is not." - SYNTAX INTEGER { enabled (1), disabled (2) } - --- Time Durations measured in seconds - -PositiveInteger ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "A positive integer. Values in excess are precluded as - unnecessary and prone to interoperability issues." - SYNTAX Integer32 (0..'7FFFFFFF'h) - -HelloRange ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The range of intervals on which hello messages are - exchanged." - SYNTAX Integer32 (1..'FFFF'h) - -UpToMaxAge ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The values that one might find or configure for - variables bounded by the maximum age of an LSA." - SYNTAX Integer32 (0..3600) - - --- The range of ifIndex - -InterfaceIndex ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The range of ifIndex." - SYNTAX Integer32 - - --- Potential Priorities for the Designated Router Election - -DesignatedRouterPriority ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The values defined for the priority of a system for - becoming the designated router." - SYNTAX Integer32 (0..'FF'h) - -TOSType ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "Type of Service is defined as a mapping to the IP Type of - Service Flags as defined in the IP Forwarding Table MIB - - +-----+-----+-----+-----+-----+-----+-----+-----+ - | | | | - | PRECEDENCE | TYPE OF SERVICE | 0 | - | | | | - +-----+-----+-----+-----+-----+-----+-----+-----+ - - IP TOS IP TOS - Field Policy Field Policy - - Contents Code Contents Code - 0 0 0 0 ==> 0 0 0 0 1 ==> 2 - 0 0 1 0 ==> 4 0 0 1 1 ==> 6 - 0 1 0 0 ==> 8 0 1 0 1 ==> 10 - 0 1 1 0 ==> 12 0 1 1 1 ==> 14 - 1 0 0 0 ==> 16 1 0 0 1 ==> 18 - 1 0 1 0 ==> 20 1 0 1 1 ==> 22 - 1 1 0 0 ==> 24 1 1 0 1 ==> 26 - 1 1 1 0 ==> 28 1 1 1 1 ==> 30 - - The remaining values are left for future definition." - SYNTAX Integer32 (0..30) - - --- OSPF General Variables - --- These parameters apply globally to the Router's --- OSPF Process. - -ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 } - - - ospfRouterId OBJECT-TYPE - SYNTAX RouterID - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "A 32-bit integer uniquely identifying the - router in the Autonomous System. - - By convention, to ensure uniqueness, this - should default to the value of one of the - router's IP interface addresses." - REFERENCE - "OSPF Version 2, C.1 Global parameters" - ::= { ospfGeneralGroup 1 } - - - ospfAdminStat OBJECT-TYPE - SYNTAX Status - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The administrative status of OSPF in the - router. The value 'enabled' denotes that the - OSPF Process is active on at least one inter- - face; 'disabled' disables it on all inter- - faces." - ::= { ospfGeneralGroup 2 } - - ospfVersionNumber OBJECT-TYPE - SYNTAX INTEGER { version2 (2) } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The current version number of the OSPF proto- - col is 2." - REFERENCE - "OSPF Version 2, Title" - ::= { ospfGeneralGroup 3 } - - - ospfAreaBdrRtrStatus OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A flag to note whether this router is an area - border router." - REFERENCE - "OSPF Version 2, Section 3 Splitting the AS into - Areas" - ::= { ospfGeneralGroup 4 } - - - ospfASBdrRtrStatus OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "A flag to note whether this router is config- - ured as an Autonomous System border router." - REFERENCE - "OSPF Version 2, Section 3.3 Classification of - routers" - ::= { ospfGeneralGroup 5 } - - ospfExternLsaCount OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of external (LS type 5) link-state - advertisements in the link-state database." - REFERENCE - "OSPF Version 2, Appendix A.4.5 AS external link - advertisements" - ::= { ospfGeneralGroup 6 } - - - ospfExternLsaCksumSum OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The 32-bit unsigned sum of the LS checksums of - the external link-state advertisements con- - tained in the link-state database. This sum - can be used to determine if there has been a - change in a router's link state database, and - to compare the link-state database of two - routers." - ::= { ospfGeneralGroup 7 } - - - ospfTOSSupport OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The router's support for type-of-service rout- - ing." - REFERENCE - "OSPF Version 2, Appendix F.1.2 Optional TOS - support" - ::= { ospfGeneralGroup 8 } - - ospfOriginateNewLsas OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of new link-state advertisements - that have been originated. This number is in- - cremented each time the router originates a new - LSA." - ::= { ospfGeneralGroup 9 } - - - ospfRxNewLsas OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of link-state advertisements re- - ceived determined to be new instantiations. - This number does not include newer instantia- - tions of self-originated link-state advertise- - ments." - ::= { ospfGeneralGroup 10 } - - ospfExtLsdbLimit OBJECT-TYPE - SYNTAX Integer32 (-1..'7FFFFFFF'h) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The maximum number of non-default AS- - external-LSAs entries that can be stored in the - link-state database. If the value is -1, then - there is no limit. - - When the number of non-default AS-external-LSAs - in a router's link-state database reaches - ospfExtLsdbLimit, the router enters Overflow- - State. The router never holds more than - ospfExtLsdbLimit non-default AS-external-LSAs - in its database. OspfExtLsdbLimit MUST be set - identically in all routers attached to the OSPF - backbone and/or any regular OSPF area. (i.e., - OSPF stub areas and NSSAs are excluded)." - DEFVAL { -1 } - ::= { ospfGeneralGroup 11 } - - ospfMulticastExtensions OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "A Bit Mask indicating whether the router is - forwarding IP multicast (Class D) datagrams - based on the algorithms defined in the Multi- - cast Extensions to OSPF. - - Bit 0, if set, indicates that the router can - forward IP multicast datagrams in the router's - directly attached areas (called intra-area mul- - ticast routing). - - Bit 1, if set, indicates that the router can - forward IP multicast datagrams between OSPF - areas (called inter-area multicast routing). - - Bit 2, if set, indicates that the router can - forward IP multicast datagrams between Auto- - nomous Systems (called inter-AS multicast rout- - ing). - - Only certain combinations of bit settings are - allowed, namely: 0 (no multicast forwarding is - enabled), 1 (intra-area multicasting only), 3 - (intra-area and inter-area multicasting), 5 - (intra-area and inter-AS multicasting) and 7 - (multicasting everywhere). By default, no mul- - ticast forwarding is enabled." - DEFVAL { 0 } - ::= { ospfGeneralGroup 12 } - - ospfExitOverflowInterval OBJECT-TYPE - SYNTAX PositiveInteger - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The number of seconds that, after entering - OverflowState, a router will attempt to leave - OverflowState. This allows the router to again - originate non-default AS-external-LSAs. When - set to 0, the router will not leave Overflow- - State until restarted." - DEFVAL { 0 } - ::= { ospfGeneralGroup 13 } - - - ospfDemandExtensions OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The router's support for demand routing." - REFERENCE - "OSPF Version 2, Appendix on Demand Routing" - ::= { ospfGeneralGroup 14 } - - --- The OSPF Area Data Structure contains information --- regarding the various areas. The interfaces and --- virtual links are configured as part of these areas. --- Area 0.0.0.0, by definition, is the Backbone Area - - - ospfAreaTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfAreaEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information describing the configured parame- - ters and cumulative statistics of the router's - attached areas." - REFERENCE - "OSPF Version 2, Section 6 The Area Data Struc- - ture" - ::= { ospf 2 } - - - ospfAreaEntry OBJECT-TYPE - SYNTAX OspfAreaEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information describing the configured parame- - ters and cumulative statistics of one of the - router's attached areas." - INDEX { ospfAreaId } - ::= { ospfAreaTable 1 } - -OspfAreaEntry ::= - SEQUENCE { - ospfAreaId - AreaID, - ospfAuthType - Integer32, - ospfImportAsExtern - INTEGER, - ospfSpfRuns - Counter32, - ospfAreaBdrRtrCount - Gauge32, - ospfAsBdrRtrCount - Gauge32, - ospfAreaLsaCount - Gauge32, - ospfAreaLsaCksumSum - Integer32, - ospfAreaSummary - INTEGER, - ospfAreaStatus - RowStatus - } - - ospfAreaId OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A 32-bit integer uniquely identifying an area. - Area ID 0.0.0.0 is used for the OSPF backbone." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfAreaEntry 1 } - - - ospfAuthType OBJECT-TYPE - SYNTAX Integer32 - -- none (0), - -- simplePassword (1) - -- md5 (2) - -- reserved for specification by IANA (> 2) - MAX-ACCESS read-create - STATUS obsolete - DESCRIPTION - "The authentication type specified for an area. - Additional authentication types may be assigned - locally on a per Area basis." - REFERENCE - "OSPF Version 2, Appendix E Authentication" - DEFVAL { 0 } -- no authentication, by default - ::= { ospfAreaEntry 2 } - - ospfImportAsExtern OBJECT-TYPE - SYNTAX INTEGER { - importExternal (1), - importNoExternal (2), - importNssa (3) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The area's support for importing AS external - link- state advertisements." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - DEFVAL { importExternal } - ::= { ospfAreaEntry 3 } - - - ospfSpfRuns OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of times that the intra-area route - table has been calculated using this area's - link-state database. This is typically done - using Dijkstra's algorithm." - ::= { ospfAreaEntry 4 } - - - ospfAreaBdrRtrCount OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of area border routers reach- - able within this area. This is initially zero, - and is calculated in each SPF Pass." - ::= { ospfAreaEntry 5 } - - ospfAsBdrRtrCount OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of Autonomous System border - routers reachable within this area. This is - initially zero, and is calculated in each SPF - Pass." - ::= { ospfAreaEntry 6 } - - - ospfAreaLsaCount OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of link-state advertisements - in this area's link-state database, excluding - AS External LSA's." - ::= { ospfAreaEntry 7 } - - - ospfAreaLsaCksumSum OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The 32-bit unsigned sum of the link-state ad- - vertisements' LS checksums contained in this - area's link-state database. This sum excludes - external (LS type 5) link-state advertisements. - The sum can be used to determine if there has - been a change in a router's link state data- - base, and to compare the link-state database of - two routers." - DEFVAL { 0 } - ::= { ospfAreaEntry 8 } - - ospfAreaSummary OBJECT-TYPE - SYNTAX INTEGER { - noAreaSummary (1), - sendAreaSummary (2) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The variable ospfAreaSummary controls the im- - port of summary LSAs into stub areas. It has - no effect on other areas. - - If it is noAreaSummary, the router will neither - originate nor propagate summary LSAs into the - stub area. It will rely entirely on its de- - fault route. - - If it is sendAreaSummary, the router will both - summarize and propagate summary LSAs." - DEFVAL { noAreaSummary } - ::= { ospfAreaEntry 9 } - - - ospfAreaStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfAreaEntry 10 } - - --- OSPF Area Default Metric Table - --- The OSPF Area Default Metric Table describes the metrics --- that a default Area Border Router will advertise into a --- Stub area. - - - ospfStubAreaTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfStubAreaEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The set of metrics that will be advertised by - a default Area Border Router into a stub area." - REFERENCE - "OSPF Version 2, Appendix C.2, Area Parameters" - ::= { ospf 3 } - - - ospfStubAreaEntry OBJECT-TYPE - SYNTAX OspfStubAreaEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The metric for a given Type of Service that - will be advertised by a default Area Border - Router into a stub area." - REFERENCE - "OSPF Version 2, Appendix C.2, Area Parameters" - INDEX { ospfStubAreaId, ospfStubTOS } - ::= { ospfStubAreaTable 1 } - -OspfStubAreaEntry ::= - SEQUENCE { - ospfStubAreaId - AreaID, - ospfStubTOS - TOSType, - ospfStubMetric - BigMetric, - ospfStubStatus - RowStatus, - ospfStubMetricType - INTEGER - } - - ospfStubAreaId OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The 32 bit identifier for the Stub Area. On - creation, this can be derived from the in- - stance." - ::= { ospfStubAreaEntry 1 } - - - ospfStubTOS OBJECT-TYPE - SYNTAX TOSType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Type of Service associated with the - metric. On creation, this can be derived from - the instance." - ::= { ospfStubAreaEntry 2 } - - - ospfStubMetric OBJECT-TYPE - SYNTAX BigMetric - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The metric value applied at the indicated type - of service. By default, this equals the least - metric at the type of service among the inter- - faces to other areas." - ::= { ospfStubAreaEntry 3 } - - - ospfStubStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfStubAreaEntry 4 } - - ospfStubMetricType OBJECT-TYPE - SYNTAX INTEGER { - ospfMetric (1), -- OSPF Metric - comparableCost (2), -- external type 1 - nonComparable (3) -- external type 2 - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the type of metric ad- - vertised as a default route." - DEFVAL { ospfMetric } - ::= { ospfStubAreaEntry 5 } - --- OSPF Link State Database - --- The Link State Database contains the Link State --- Advertisements from throughout the areas that the --- device is attached to. - - - ospfLsdbTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfLsdbEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The OSPF Process's Link State Database." - REFERENCE - "OSPF Version 2, Section 12 Link State Adver- - tisements" - ::= { ospf 4 } - - - ospfLsdbEntry OBJECT-TYPE - SYNTAX OspfLsdbEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A single Link State Advertisement." - INDEX { ospfLsdbAreaId, ospfLsdbType, - ospfLsdbLsid, ospfLsdbRouterId } - ::= { ospfLsdbTable 1 } - -OspfLsdbEntry ::= - SEQUENCE { - ospfLsdbAreaId - AreaID, - ospfLsdbType - INTEGER, - ospfLsdbLsid - IpAddress, - ospfLsdbRouterId - RouterID, - ospfLsdbSequence - Integer32, - ospfLsdbAge - Integer32, - ospfLsdbChecksum - Integer32, - ospfLsdbAdvertisement - OCTET STRING - } - ospfLsdbAreaId OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The 32 bit identifier of the Area from which - the LSA was received." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfLsdbEntry 1 } - --- External Link State Advertisements are permitted --- for backward compatibility, but should be displayed in --- the ospfExtLsdbTable rather than here. - - ospfLsdbType OBJECT-TYPE - SYNTAX INTEGER { - routerLink (1), - networkLink (2), - summaryLink (3), - asSummaryLink (4), - asExternalLink (5), -- but see ospfExtLsdbTable - multicastLink (6), - nssaExternalLink (7) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of the link state advertisement. - Each link state type has a separate advertise- - ment format." - REFERENCE - "OSPF Version 2, Appendix A.4.1 The Link State - Advertisement header" - ::= { ospfLsdbEntry 2 } - - ospfLsdbLsid OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Link State ID is an LS Type Specific field - containing either a Router ID or an IP Address; - it identifies the piece of the routing domain - that is being described by the advertisement." - REFERENCE - "OSPF Version 2, Section 12.1.4 Link State ID" - ::= { ospfLsdbEntry 3 } - ospfLsdbRouterId OBJECT-TYPE - SYNTAX RouterID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The 32 bit number that uniquely identifies the - originating router in the Autonomous System." - REFERENCE - "OSPF Version 2, Appendix C.1 Global parameters" - ::= { ospfLsdbEntry 4 } - --- Note that the OSPF Sequence Number is a 32 bit signed --- integer. It starts with the value '80000001'h, --- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h --- Thus, a typical sequence number will be very negative. - - ospfLsdbSequence OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The sequence number field is a signed 32-bit - integer. It is used to detect old and dupli- - cate link state advertisements. The space of - sequence numbers is linearly ordered. The - larger the sequence number the more recent the - advertisement." - REFERENCE - "OSPF Version 2, Section 12.1.6 LS sequence - number" - ::= { ospfLsdbEntry 5 } - - - ospfLsdbAge OBJECT-TYPE - SYNTAX Integer32 -- Should be 0..MaxAge - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This field is the age of the link state adver- - tisement in seconds." - REFERENCE - "OSPF Version 2, Section 12.1.1 LS age" - ::= { ospfLsdbEntry 6 } - - ospfLsdbChecksum OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This field is the checksum of the complete - contents of the advertisement, excepting the - age field. The age field is excepted so that - an advertisement's age can be incremented - without updating the checksum. The checksum - used is the same that is used for ISO connec- - tionless datagrams; it is commonly referred to - as the Fletcher checksum." - REFERENCE - "OSPF Version 2, Section 12.1.7 LS checksum" - ::= { ospfLsdbEntry 7 } - - - ospfLsdbAdvertisement OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (1..65535)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The entire Link State Advertisement, including - its header." - REFERENCE - "OSPF Version 2, Section 12 Link State Adver- - tisements" - ::= { ospfLsdbEntry 8 } - - --- Address Range Table - --- The Address Range Table acts as an adjunct to the Area --- Table; It describes those Address Range Summaries that --- are configured to be propagated from an Area to reduce --- the amount of information about it which is known beyond --- its borders. - - ospfAreaRangeTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfAreaRangeEntry - MAX-ACCESS not-accessible - STATUS obsolete - DESCRIPTION - "A range if IP addresses specified by an IP - address/IP network mask pair. For example, - class B address range of X.X.X.X with a network - mask of 255.255.0.0 includes all IP addresses - from X.X.0.0 to X.X.255.255" - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospf 5 } - ospfAreaRangeEntry OBJECT-TYPE - SYNTAX OspfAreaRangeEntry - MAX-ACCESS not-accessible - STATUS obsolete - DESCRIPTION - "A range if IP addresses specified by an IP - address/IP network mask pair. For example, - class B address range of X.X.X.X with a network - mask of 255.255.0.0 includes all IP addresses - from X.X.0.0 to X.X.255.255" - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet } - ::= { ospfAreaRangeTable 1 } - -OspfAreaRangeEntry ::= - SEQUENCE { - ospfAreaRangeAreaId - AreaID, - ospfAreaRangeNet - IpAddress, - ospfAreaRangeMask - IpAddress, - ospfAreaRangeStatus - RowStatus, - ospfAreaRangeEffect - INTEGER - } - - ospfAreaRangeAreaId OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The Area the Address Range is to be found - within." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfAreaRangeEntry 1 } - - - ospfAreaRangeNet OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The IP Address of the Net or Subnet indicated - by the range." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfAreaRangeEntry 2 } - - - ospfAreaRangeMask OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-create - STATUS obsolete - DESCRIPTION - "The Subnet Mask that pertains to the Net or - Subnet." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfAreaRangeEntry 3 } - - ospfAreaRangeStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS obsolete - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfAreaRangeEntry 4 } - - - ospfAreaRangeEffect OBJECT-TYPE - SYNTAX INTEGER { - advertiseMatching (1), - doNotAdvertiseMatching (2) - } - MAX-ACCESS read-create - STATUS obsolete - DESCRIPTION - "Subnets subsumed by ranges either trigger the - advertisement of the indicated summary (adver- - tiseMatching), or result in the subnet's not - being advertised at all outside the area." - DEFVAL { advertiseMatching } - ::= { ospfAreaRangeEntry 5 } - - - --- OSPF Host Table - --- The Host/Metric Table indicates what hosts are directly --- attached to the Router, and what metrics and types of --- service should be advertised for them. - - ospfHostTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfHostEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The list of Hosts, and their metrics, that the - router will advertise as host routes." - REFERENCE - "OSPF Version 2, Appendix C.6 Host route param- - eters" - ::= { ospf 6 } - - - ospfHostEntry OBJECT-TYPE - SYNTAX OspfHostEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A metric to be advertised, for a given type of - service, when a given host is reachable." - INDEX { ospfHostIpAddress, ospfHostTOS } - ::= { ospfHostTable 1 } - -OspfHostEntry ::= - SEQUENCE { - ospfHostIpAddress - IpAddress, - ospfHostTOS - TOSType, - ospfHostMetric - Metric, - ospfHostStatus - RowStatus, - ospfHostAreaID - AreaID - } - - ospfHostIpAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP Address of the Host." - REFERENCE - "OSPF Version 2, Appendix C.6 Host route parame- - ters" - ::= { ospfHostEntry 1 } - - - ospfHostTOS OBJECT-TYPE - SYNTAX TOSType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Type of Service of the route being config- - ured." - REFERENCE - "OSPF Version 2, Appendix C.6 Host route parame- - ters" - ::= { ospfHostEntry 2 } - - - ospfHostMetric OBJECT-TYPE - SYNTAX Metric - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The Metric to be advertised." - REFERENCE - "OSPF Version 2, Appendix C.6 Host route parame- - ters" - ::= { ospfHostEntry 3 } - - ospfHostStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfHostEntry 4 } - - - ospfHostAreaID OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Area the Host Entry is to be found within. - By default, the area that a subsuming OSPF in- - terface is in, or 0.0.0.0" - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfHostEntry 5 } - - --- OSPF Interface Table - --- The OSPF Interface Table augments the ipAddrTable --- with OSPF specific information. - - ospfIfTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfIfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The OSPF Interface Table describes the inter- - faces from the viewpoint of OSPF." - REFERENCE - "OSPF Version 2, Appendix C.3 Router interface - parameters" - ::= { ospf 7 } - - - ospfIfEntry OBJECT-TYPE - SYNTAX OspfIfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The OSPF Interface Entry describes one inter- - face from the viewpoint of OSPF." - INDEX { ospfIfIpAddress, ospfAddressLessIf } - ::= { ospfIfTable 1 } - -OspfIfEntry ::= - SEQUENCE { - ospfIfIpAddress - IpAddress, - ospfAddressLessIf - Integer32, - ospfIfAreaId - AreaID, - ospfIfType - INTEGER, - ospfIfAdminStat - Status, - ospfIfRtrPriority - DesignatedRouterPriority, - ospfIfTransitDelay - UpToMaxAge, - ospfIfRetransInterval - UpToMaxAge, - ospfIfHelloInterval - HelloRange, - ospfIfRtrDeadInterval - PositiveInteger, - ospfIfPollInterval - PositiveInteger, - ospfIfState - INTEGER, - ospfIfDesignatedRouter - IpAddress, - ospfIfBackupDesignatedRouter - IpAddress, - ospfIfEvents - Counter32, - ospfIfAuthType - INTEGER, - ospfIfAuthKey - OCTET STRING, - ospfIfStatus - RowStatus, - ospfIfMulticastForwarding - INTEGER, - ospfIfDemand - TruthValue - } - - ospfIfIpAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address of this OSPF interface." - ::= { ospfIfEntry 1 } - - ospfAddressLessIf OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "For the purpose of easing the instancing of - addressed and addressless interfaces; This - variable takes the value 0 on interfaces with - IP Addresses, and the corresponding value of - ifIndex for interfaces having no IP Address." - ::= { ospfIfEntry 2 } - ospfIfAreaId OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "A 32-bit integer uniquely identifying the area - to which the interface connects. Area ID - 0.0.0.0 is used for the OSPF backbone." - DEFVAL { '00000000'H } -- 0.0.0.0 - ::= { ospfIfEntry 3 } - - ospfIfType OBJECT-TYPE - SYNTAX INTEGER { - broadcast (1), - nbma (2), - pointToPoint (3), - pointToMultipoint (5) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The OSPF interface type. - - By way of a default, this field may be intuited - from the corresponding value of ifType. Broad- - cast LANs, such as Ethernet and IEEE 802.5, - take the value 'broadcast', X.25 and similar - technologies take the value 'nbma', and links - that are definitively point to point take the - value 'pointToPoint'." - ::= { ospfIfEntry 4 } - - - ospfIfAdminStat OBJECT-TYPE - SYNTAX Status - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The OSPF interface's administrative status. - The value formed on the interface, and the in- - terface will be advertised as an internal route - to some area. The value 'disabled' denotes - that the interface is external to OSPF." - DEFVAL { enabled } - ::= { ospfIfEntry 5 } - - ospfIfRtrPriority OBJECT-TYPE - SYNTAX DesignatedRouterPriority - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The priority of this interface. Used in - multi-access networks, this field is used in - the designated router election algorithm. The - value 0 signifies that the router is not eligi- - ble to become the designated router on this - particular network. In the event of a tie in - this value, routers will use their Router ID as - a tie breaker." - DEFVAL { 1 } - ::= { ospfIfEntry 6 } - - - ospfIfTransitDelay OBJECT-TYPE - SYNTAX UpToMaxAge - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The estimated number of seconds it takes to - transmit a link state update packet over this - interface." - DEFVAL { 1 } - ::= { ospfIfEntry 7 } - - - ospfIfRetransInterval OBJECT-TYPE - SYNTAX UpToMaxAge - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The number of seconds between link-state ad- - vertisement retransmissions, for adjacencies - belonging to this interface. This value is - also used when retransmitting database descrip- - tion and link-state request packets." - DEFVAL { 5 } - ::= { ospfIfEntry 8 } - - - ospfIfHelloInterval OBJECT-TYPE - SYNTAX HelloRange - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The length of time, in seconds, between the - Hello packets that the router sends on the in- - terface. This value must be the same for all - routers attached to a common network." - DEFVAL { 10 } - ::= { ospfIfEntry 9 } - - - ospfIfRtrDeadInterval OBJECT-TYPE - SYNTAX PositiveInteger - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The number of seconds that a router's Hello - packets have not been seen before it's neigh- - bors declare the router down. This should be - some multiple of the Hello interval. This - value must be the same for all routers attached - to a common network." - DEFVAL { 40 } - ::= { ospfIfEntry 10 } - - - ospfIfPollInterval OBJECT-TYPE - SYNTAX PositiveInteger - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The larger time interval, in seconds, between - the Hello packets sent to an inactive non- - broadcast multi- access neighbor." - DEFVAL { 120 } - ::= { ospfIfEntry 11 } - - - ospfIfState OBJECT-TYPE - SYNTAX INTEGER { - down (1), - loopback (2), - waiting (3), - pointToPoint (4), - designatedRouter (5), - backupDesignatedRouter (6), - otherDesignatedRouter (7) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The OSPF Interface State." - DEFVAL { down } - ::= { ospfIfEntry 12 } - - - ospfIfDesignatedRouter OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP Address of the Designated Router." - DEFVAL { '00000000'H } -- 0.0.0.0 - ::= { ospfIfEntry 13 } - - - ospfIfBackupDesignatedRouter OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP Address of the Backup Designated - Router." - DEFVAL { '00000000'H } -- 0.0.0.0 - ::= { ospfIfEntry 14 } - - ospfIfEvents OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of times this OSPF interface has - changed its state, or an error has occurred." - ::= { ospfIfEntry 15 } - - - ospfIfAuthKey OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (0..256)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The Authentication Key. If the Area's Author- - ization Type is simplePassword, and the key - length is shorter than 8 octets, the agent will - left adjust and zero fill to 8 octets. - - Note that unauthenticated interfaces need no - authentication key, and simple password authen- - tication cannot use a key of more than 8 oc- - tets. Larger keys are useful only with authen- - tication mechanisms not specified in this docu- - ment. - - When read, ospfIfAuthKey always returns an Oc- - tet String of length zero." - REFERENCE - "OSPF Version 2, Section 9 The Interface Data - Structure" - DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 - ::= { ospfIfEntry 16 } - - ospfIfStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfIfEntry 17 } - - - ospfIfMulticastForwarding OBJECT-TYPE - SYNTAX INTEGER { - blocked (1), -- no multicast forwarding - multicast (2), -- using multicast address - unicast (3) -- to each OSPF neighbor - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The way multicasts should forwarded on this - interface; not forwarded, forwarded as data - link multicasts, or forwarded as data link uni- - casts. Data link multicasting is not meaning- - ful on point to point and NBMA interfaces, and - setting ospfMulticastForwarding to 0 effective- - ly disables all multicast forwarding." - DEFVAL { blocked } - ::= { ospfIfEntry 18 } - - - ospfIfDemand OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Indicates whether Demand OSPF procedures (hel- - lo supression to FULL neighbors and setting the - DoNotAge flag on proogated LSAs) should be per- - formed on this interface." - DEFVAL { false } - ::= { ospfIfEntry 19 } - - - ospfIfAuthType OBJECT-TYPE - SYNTAX INTEGER (0..255) - -- none (0), - -- simplePassword (1) - -- md5 (2) - -- reserved for specification by IANA (> 2) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The authentication type specified for an in- - terface. Additional authentication types may - be assigned locally." - REFERENCE - "OSPF Version 2, Appendix E Authentication" - DEFVAL { 0 } -- no authentication, by default - ::= { ospfIfEntry 20 } - - --- OSPF Interface Metric Table - --- The Metric Table describes the metrics to be advertised --- for a specified interface at the various types of service. --- As such, this table is an adjunct of the OSPF Interface --- Table. - --- Types of service, as defined by RFC 791, have the ability --- to request low delay, high bandwidth, or reliable linkage. - --- For the purposes of this specification, the measure of --- bandwidth - --- Metric = 10^8 / ifSpeed - --- is the default value. For multiple link interfaces, note --- that ifSpeed is the sum of the individual link speeds. --- This yields a number having the following typical values: - --- Network Type/bit rate Metric - --- >= 100 MBPS 1 --- Ethernet/802.3 10 --- E1 48 --- T1 (ESF) 65 --- 64 KBPS 1562 --- 56 KBPS 1785 --- 19.2 KBPS 5208 --- 9.6 KBPS 10416 - --- Routes that are not specified use the default (TOS 0) metric - - ospfIfMetricTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfIfMetricEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The TOS metrics for a non-virtual interface - identified by the interface index." - REFERENCE - "OSPF Version 2, Appendix C.3 Router interface - parameters" - ::= { ospf 8 } - - ospfIfMetricEntry OBJECT-TYPE - SYNTAX OspfIfMetricEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A particular TOS metric for a non-virtual in- - terface identified by the interface index." - REFERENCE - "OSPF Version 2, Appendix C.3 Router interface - parameters" - INDEX { ospfIfMetricIpAddress, - ospfIfMetricAddressLessIf, - ospfIfMetricTOS } - ::= { ospfIfMetricTable 1 } - -OspfIfMetricEntry ::= - SEQUENCE { - ospfIfMetricIpAddress - IpAddress, - ospfIfMetricAddressLessIf - Integer32, - ospfIfMetricTOS - TOSType, - ospfIfMetricValue - Metric, - ospfIfMetricStatus - RowStatus - } - - ospfIfMetricIpAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address of this OSPF interface. On row - creation, this can be derived from the in- - stance." - ::= { ospfIfMetricEntry 1 } - - ospfIfMetricAddressLessIf OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "For the purpose of easing the instancing of - addressed and addressless interfaces; This - variable takes the value 0 on interfaces with - IP Addresses, and the value of ifIndex for in- - terfaces having no IP Address. On row crea- - tion, this can be derived from the instance." - ::= { ospfIfMetricEntry 2 } - - - ospfIfMetricTOS OBJECT-TYPE - SYNTAX TOSType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of service metric being referenced. - On row creation, this can be derived from the - instance." - ::= { ospfIfMetricEntry 3 } - - - ospfIfMetricValue OBJECT-TYPE - SYNTAX Metric - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The metric of using this type of service on - this interface. The default value of the TOS 0 - Metric is 10^8 / ifSpeed." - ::= { ospfIfMetricEntry 4 } - - ospfIfMetricStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfIfMetricEntry 5 } - - --- OSPF Virtual Interface Table - --- The Virtual Interface Table describes the virtual --- links that the OSPF Process is configured to --- carry on. - - ospfVirtIfTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfVirtIfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about this router's virtual inter- - faces." - REFERENCE - "OSPF Version 2, Appendix C.4 Virtual link - parameters" - ::= { ospf 9 } - - - ospfVirtIfEntry OBJECT-TYPE - SYNTAX OspfVirtIfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a single Virtual Interface." - INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor } - ::= { ospfVirtIfTable 1 } - -OspfVirtIfEntry ::= - SEQUENCE { - ospfVirtIfAreaId - AreaID, - ospfVirtIfNeighbor - RouterID, - ospfVirtIfTransitDelay - UpToMaxAge, - ospfVirtIfRetransInterval - UpToMaxAge, - ospfVirtIfHelloInterval - HelloRange, - ospfVirtIfRtrDeadInterval - PositiveInteger, - ospfVirtIfState - INTEGER, - ospfVirtIfEvents - Counter32, - ospfVirtIfAuthType - INTEGER, - ospfVirtIfAuthKey - OCTET STRING, - ospfVirtIfStatus - RowStatus - } - - ospfVirtIfAreaId OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Transit Area that the Virtual Link - traverses. By definition, this is not 0.0.0.0" - ::= { ospfVirtIfEntry 1 } - - - ospfVirtIfNeighbor OBJECT-TYPE - SYNTAX RouterID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Router ID of the Virtual Neighbor." - ::= { ospfVirtIfEntry 2 } - - - ospfVirtIfTransitDelay OBJECT-TYPE - SYNTAX UpToMaxAge - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The estimated number of seconds it takes to - transmit a link- state update packet over this - interface." - DEFVAL { 1 } - ::= { ospfVirtIfEntry 3 } - - - ospfVirtIfRetransInterval OBJECT-TYPE - SYNTAX UpToMaxAge - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The number of seconds between link-state ad- - vertisement retransmissions, for adjacencies - belonging to this interface. This value is - also used when retransmitting database descrip- - tion and link-state request packets. This - value should be well over the expected round- - trip time." - DEFVAL { 5 } - ::= { ospfVirtIfEntry 4 } - - - ospfVirtIfHelloInterval OBJECT-TYPE - SYNTAX HelloRange - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The length of time, in seconds, between the - Hello packets that the router sends on the in- - terface. This value must be the same for the - virtual neighbor." - DEFVAL { 10 } - ::= { ospfVirtIfEntry 5 } - - - ospfVirtIfRtrDeadInterval OBJECT-TYPE - SYNTAX PositiveInteger - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The number of seconds that a router's Hello - packets have not been seen before it's neigh- - bors declare the router down. This should be - some multiple of the Hello interval. This - value must be the same for the virtual neigh- - bor." - DEFVAL { 60 } - ::= { ospfVirtIfEntry 6 } - - - ospfVirtIfState OBJECT-TYPE - SYNTAX INTEGER { - down (1), -- these use the same encoding - pointToPoint (4) -- as the ospfIfTable - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "OSPF virtual interface states." - DEFVAL { down } - ::= { ospfVirtIfEntry 7 } - - - ospfVirtIfEvents OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of state changes or error events on - this Virtual Link" - ::= { ospfVirtIfEntry 8 } - - - ospfVirtIfAuthKey OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..256)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "If Authentication Type is simplePassword, the - device will left adjust and zero fill to 8 oc- - tets. - - Note that unauthenticated interfaces need no - authentication key, and simple password authen- - tication cannot use a key of more than 8 oc- - tets. Larger keys are useful only with authen- - tication mechanisms not specified in this docu- - ment. - - When read, ospfVifAuthKey always returns a - string of length zero." - REFERENCE - "OSPF Version 2, Section 9 The Interface Data - Structure" - DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 - ::= { ospfVirtIfEntry 9 } - - - ospfVirtIfStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfVirtIfEntry 10 } - - - ospfVirtIfAuthType OBJECT-TYPE - SYNTAX INTEGER (0..255) - -- none (0), - -- simplePassword (1) - -- md5 (2) - -- reserved for specification by IANA (> 2) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The authentication type specified for a virtu- - al interface. Additional authentication types - may be assigned locally." - REFERENCE - "OSPF Version 2, Appendix E Authentication" - DEFVAL { 0 } -- no authentication, by default - ::= { ospfVirtIfEntry 11 } - - --- OSPF Neighbor Table - --- The OSPF Neighbor Table describes all neighbors in --- the locality of the subject router. - - ospfNbrTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfNbrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table of non-virtual neighbor information." - REFERENCE - "OSPF Version 2, Section 10 The Neighbor Data - Structure" - ::= { ospf 10 } - - - ospfNbrEntry OBJECT-TYPE - SYNTAX OspfNbrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The information regarding a single neighbor." - REFERENCE - "OSPF Version 2, Section 10 The Neighbor Data - Structure" - INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex } - ::= { ospfNbrTable 1 } - -OspfNbrEntry ::= - SEQUENCE { - ospfNbrIpAddr - IpAddress, - ospfNbrAddressLessIndex - InterfaceIndex, - ospfNbrRtrId - RouterID, - ospfNbrOptions - Integer32, - ospfNbrPriority - DesignatedRouterPriority, - ospfNbrState - INTEGER, - ospfNbrEvents - Counter32, - ospfNbrLsRetransQLen - Gauge32, - ospfNbmaNbrStatus - RowStatus, - ospfNbmaNbrPermanence - INTEGER, - ospfNbrHelloSuppressed - TruthValue - } - - ospfNbrIpAddr OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address this neighbor is using in its - IP Source Address. Note that, on addressless - links, this will not be 0.0.0.0, but the ad- - dress of another of the neighbor's interfaces." - ::= { ospfNbrEntry 1 } - - - ospfNbrAddressLessIndex OBJECT-TYPE - SYNTAX InterfaceIndex - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "On an interface having an IP Address, zero. - On addressless interfaces, the corresponding - value of ifIndex in the Internet Standard MIB. - On row creation, this can be derived from the - instance." - ::= { ospfNbrEntry 2 } - - - ospfNbrRtrId OBJECT-TYPE - SYNTAX RouterID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A 32-bit integer (represented as a type IpAd- - dress) uniquely identifying the neighboring - router in the Autonomous System." - DEFVAL { '00000000'H } -- 0.0.0.0 - ::= { ospfNbrEntry 3 } - - - ospfNbrOptions OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A Bit Mask corresponding to the neighbor's op- - tions field. - - Bit 0, if set, indicates that the system will - operate on Type of Service metrics other than - TOS 0. If zero, the neighbor will ignore all - metrics except the TOS 0 metric. - - Bit 1, if set, indicates that the associated - area accepts and operates on external informa- - tion; if zero, it is a stub area. - - Bit 2, if set, indicates that the system is ca- - pable of routing IP Multicast datagrams; i.e., - that it implements the Multicast Extensions to - OSPF. - - Bit 3, if set, indicates that the associated - area is an NSSA. These areas are capable of - carrying type 7 external advertisements, which - are translated into type 5 external advertise- - ments at NSSA borders." - REFERENCE - "OSPF Version 2, Section 12.1.2 Options" - DEFVAL { 0 } - ::= { ospfNbrEntry 4 } - - - ospfNbrPriority OBJECT-TYPE - SYNTAX DesignatedRouterPriority - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The priority of this neighbor in the designat- - ed router election algorithm. The value 0 sig- - nifies that the neighbor is not eligible to be- - come the designated router on this particular - network." - DEFVAL { 1 } - ::= { ospfNbrEntry 5 } - - - ospfNbrState OBJECT-TYPE - SYNTAX INTEGER { - down (1), - attempt (2), - init (3), - twoWay (4), - exchangeStart (5), - exchange (6), - loading (7), - full (8) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The State of the relationship with this Neigh- - bor." - REFERENCE - "OSPF Version 2, Section 10.1 Neighbor States" - DEFVAL { down } - ::= { ospfNbrEntry 6 } - - - ospfNbrEvents OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of times this neighbor relationship - has changed state, or an error has occurred." - ::= { ospfNbrEntry 7 } - - - ospfNbrLsRetransQLen OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The current length of the retransmission - queue." - ::= { ospfNbrEntry 8 } - - - ospfNbmaNbrStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfNbrEntry 9 } - - - ospfNbmaNbrPermanence OBJECT-TYPE - SYNTAX INTEGER { - dynamic (1), -- learned through protocol - permanent (2) -- configured address - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. 'dynamic' and 'permanent' refer to how - the neighbor became known." - DEFVAL { permanent } - ::= { ospfNbrEntry 10 } - - - ospfNbrHelloSuppressed OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Indicates whether Hellos are being suppressed - to the neighbor" - ::= { ospfNbrEntry 11 } - - --- OSPF Virtual Neighbor Table - --- This table describes all virtual neighbors. --- Since Virtual Links are configured in the --- virtual interface table, this table is read-only. - - ospfVirtNbrTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfVirtNbrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table of virtual neighbor information." - REFERENCE - "OSPF Version 2, Section 15 Virtual Links" - ::= { ospf 11 } - - - ospfVirtNbrEntry OBJECT-TYPE - SYNTAX OspfVirtNbrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Virtual neighbor information." - INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId } - ::= { ospfVirtNbrTable 1 } - -OspfVirtNbrEntry ::= - SEQUENCE { - ospfVirtNbrArea - AreaID, - ospfVirtNbrRtrId - RouterID, - ospfVirtNbrIpAddr - IpAddress, - ospfVirtNbrOptions - Integer32, - ospfVirtNbrState - INTEGER, - ospfVirtNbrEvents - Counter32, - ospfVirtNbrLsRetransQLen - Gauge32, - ospfVirtNbrHelloSuppressed - TruthValue - } - - ospfVirtNbrArea OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Transit Area Identifier." - ::= { ospfVirtNbrEntry 1 } - - - ospfVirtNbrRtrId OBJECT-TYPE - SYNTAX RouterID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A 32-bit integer uniquely identifying the - neighboring router in the Autonomous System." - ::= { ospfVirtNbrEntry 2 } - - - ospfVirtNbrIpAddr OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address this Virtual Neighbor is us- - ing." - ::= { ospfVirtNbrEntry 3 } - - - ospfVirtNbrOptions OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A Bit Mask corresponding to the neighbor's op- - tions field. - - Bit 1, if set, indicates that the system will - operate on Type of Service metrics other than - TOS 0. If zero, the neighbor will ignore all - metrics except the TOS 0 metric. - - Bit 2, if set, indicates that the system is - Network Multicast capable; ie, that it imple- - ments OSPF Multicast Routing." - ::= { ospfVirtNbrEntry 4 } - ospfVirtNbrState OBJECT-TYPE - SYNTAX INTEGER { - down (1), - attempt (2), - init (3), - twoWay (4), - exchangeStart (5), - exchange (6), - loading (7), - full (8) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The state of the Virtual Neighbor Relation- - ship." - ::= { ospfVirtNbrEntry 5 } - - - ospfVirtNbrEvents OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of times this virtual link has - changed its state, or an error has occurred." - ::= { ospfVirtNbrEntry 6 } - - - ospfVirtNbrLsRetransQLen OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The current length of the retransmission - queue." - ::= { ospfVirtNbrEntry 7 } - - - ospfVirtNbrHelloSuppressed OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Indicates whether Hellos are being suppressed - to the neighbor" - ::= { ospfVirtNbrEntry 8 } - --- OSPF Link State Database, External - --- The Link State Database contains the Link State --- Advertisements from throughout the areas that the --- device is attached to. - --- This table is identical to the OSPF LSDB Table in --- format, but contains only External Link State --- Advertisements. The purpose is to allow external --- LSAs to be displayed once for the router rather --- than once in each non-stub area. - - ospfExtLsdbTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfExtLsdbEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The OSPF Process's Links State Database." - REFERENCE - "OSPF Version 2, Section 12 Link State Adver- - tisements" - ::= { ospf 12 } - - - ospfExtLsdbEntry OBJECT-TYPE - SYNTAX OspfExtLsdbEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A single Link State Advertisement." - INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId } - ::= { ospfExtLsdbTable 1 } - -OspfExtLsdbEntry ::= - SEQUENCE { - ospfExtLsdbType - INTEGER, - ospfExtLsdbLsid - IpAddress, - ospfExtLsdbRouterId - RouterID, - ospfExtLsdbSequence - Integer32, - ospfExtLsdbAge - Integer32, - ospfExtLsdbChecksum - Integer32, - ospfExtLsdbAdvertisement - OCTET STRING - } - - ospfExtLsdbType OBJECT-TYPE - SYNTAX INTEGER { - asExternalLink (5) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of the link state advertisement. - Each link state type has a separate advertise- - ment format." - REFERENCE - "OSPF Version 2, Appendix A.4.1 The Link State - Advertisement header" - ::= { ospfExtLsdbEntry 1 } - - - ospfExtLsdbLsid OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Link State ID is an LS Type Specific field - containing either a Router ID or an IP Address; - it identifies the piece of the routing domain - that is being described by the advertisement." - REFERENCE - "OSPF Version 2, Section 12.1.4 Link State ID" - ::= { ospfExtLsdbEntry 2 } - - - ospfExtLsdbRouterId OBJECT-TYPE - SYNTAX RouterID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The 32 bit number that uniquely identifies the - originating router in the Autonomous System." - REFERENCE - "OSPF Version 2, Appendix C.1 Global parameters" - ::= { ospfExtLsdbEntry 3 } - --- Note that the OSPF Sequence Number is a 32 bit signed --- integer. It starts with the value '80000001'h, --- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h --- Thus, a typical sequence number will be very negative. - ospfExtLsdbSequence OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The sequence number field is a signed 32-bit - integer. It is used to detect old and dupli- - cate link state advertisements. The space of - sequence numbers is linearly ordered. The - larger the sequence number the more recent the - advertisement." - REFERENCE - "OSPF Version 2, Section 12.1.6 LS sequence - number" - ::= { ospfExtLsdbEntry 4 } - - - ospfExtLsdbAge OBJECT-TYPE - SYNTAX Integer32 -- Should be 0..MaxAge - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This field is the age of the link state adver- - tisement in seconds." - REFERENCE - "OSPF Version 2, Section 12.1.1 LS age" - ::= { ospfExtLsdbEntry 5 } - - - ospfExtLsdbChecksum OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This field is the checksum of the complete - contents of the advertisement, excepting the - age field. The age field is excepted so that - an advertisement's age can be incremented - without updating the checksum. The checksum - used is the same that is used for ISO connec- - tionless datagrams; it is commonly referred to - as the Fletcher checksum." - REFERENCE - "OSPF Version 2, Section 12.1.7 LS checksum" - ::= { ospfExtLsdbEntry 6 } - - - ospfExtLsdbAdvertisement OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(36)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The entire Link State Advertisement, including - its header." - REFERENCE - "OSPF Version 2, Section 12 Link State Adver- - tisements" - ::= { ospfExtLsdbEntry 7 } - - --- OSPF Use of the CIDR Route Table - -ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 } - --- The IP Forwarding Table defines a number of objects for use by --- the routing protocol to externalize its information. Most of --- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy, --- ipForwardNextHop, ipForwardIfIndex, ipForwardType, --- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are --- defined there. - --- Those that leave some discretion are defined here. - --- ipCidrRouteProto is, of course, ospf (13). - --- ipCidrRouteAge is the time since the route was first calculated, --- as opposed to the time since the last SPF run. - --- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing --- protocol. The following values shall be found there depending --- on the way the route was calculated. - -ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 } -ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 } -ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 } -ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 } - --- ipCidrRouteMetric1 is, by definition, the primary routing --- metric. Therefore, it should be the metric that route --- selection is based on. For intra-area and inter-area routes, --- it is an OSPF metric. For External Type 1 (comparable value) --- routes, it is an OSPF metric plus the External Metric. For --- external Type 2 (non-comparable value) routes, it is the --- external metric. - --- ipCidrRouteMetric2 is, by definition, a secondary routing --- metric. Therefore, it should be the metric that breaks a tie --- among routes having equal metric1 values and the same --- calculation rule. For intra-area, inter-area routes, and --- External Type 1 (comparable value) routes, it is unused. For --- external Type 2 (non-comparable value) routes, it is the metric --- to the AS border router. - --- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are --- unused. - --- --- The OSPF Area Aggregate Table --- --- This table replaces the OSPF Area Summary Table, being an --- extension of that for CIDR routers. - - ospfAreaAggregateTable OBJECT-TYPE - SYNTAX SEQUENCE OF OspfAreaAggregateEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A range of IP addresses specified by an IP - address/IP network mask pair. For example, - class B address range of X.X.X.X with a network - mask of 255.255.0.0 includes all IP addresses - from X.X.0.0 to X.X.255.255. Note that if - ranges are configured such that one range sub- - sumes another range (e.g., 10.0.0.0 mask - 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the - most specific match is the preferred one." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospf 14 } - - - ospfAreaAggregateEntry OBJECT-TYPE - SYNTAX OspfAreaAggregateEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A range of IP addresses specified by an IP - address/IP network mask pair. For example, - class B address range of X.X.X.X with a network - mask of 255.255.0.0 includes all IP addresses - from X.X.0.0 to X.X.255.255. Note that if - ranges are range configured such that one range - subsumes another range (e.g., 10.0.0.0 mask - 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the - most specific match is the preferred one." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, - ospfAreaAggregateNet, ospfAreaAggregateMask } - ::= { ospfAreaAggregateTable 1 } - - -OspfAreaAggregateEntry ::= - SEQUENCE { - ospfAreaAggregateAreaID - AreaID, - ospfAreaAggregateLsdbType - INTEGER, - ospfAreaAggregateNet - IpAddress, - ospfAreaAggregateMask - IpAddress, - ospfAreaAggregateStatus - RowStatus, - ospfAreaAggregateEffect - INTEGER - } - - ospfAreaAggregateAreaID OBJECT-TYPE - SYNTAX AreaID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Area the Address Aggregate is to be found - within." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfAreaAggregateEntry 1 } - - - ospfAreaAggregateLsdbType OBJECT-TYPE - SYNTAX INTEGER { - summaryLink (3), - nssaExternalLink (7) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of the Address Aggregate. This field - specifies the Lsdb type that this Address Ag- - gregate applies to." - REFERENCE - "OSPF Version 2, Appendix A.4.1 The Link State - Advertisement header" - ::= { ospfAreaAggregateEntry 2 } - - - ospfAreaAggregateNet OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP Address of the Net or Subnet indicated - by the range." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfAreaAggregateEntry 3 } - - - ospfAreaAggregateMask OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Subnet Mask that pertains to the Net or - Subnet." - REFERENCE - "OSPF Version 2, Appendix C.2 Area parameters" - ::= { ospfAreaAggregateEntry 4 } - - - ospfAreaAggregateStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable displays the status of the en- - try. Setting it to 'invalid' has the effect of - rendering it inoperative. The internal effect - (row removal) is implementation dependent." - ::= { ospfAreaAggregateEntry 5 } - - - ospfAreaAggregateEffect OBJECT-TYPE - SYNTAX INTEGER { - advertiseMatching (1), - doNotAdvertiseMatching (2) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Subnets subsumed by ranges either trigger the - advertisement of the indicated aggregate (ad- - vertiseMatching), or result in the subnet's not - being advertised at all outside the area." - DEFVAL { advertiseMatching } - ::= { ospfAreaAggregateEntry 6 } - - --- conformance information - -ospfConformance OBJECT IDENTIFIER ::= { ospf 15 } - -ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 } -ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 } - --- compliance statements - - ospfCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement " - MODULE -- this module - MANDATORY-GROUPS { - ospfBasicGroup, - ospfAreaGroup, - ospfStubAreaGroup, - ospfIfGroup, - ospfIfMetricGroup, - ospfVirtIfGroup, - ospfNbrGroup, - ospfVirtNbrGroup, - ospfAreaAggregateGroup - } - ::= { ospfCompliances 1 } - - --- units of conformance - - ospfBasicGroup OBJECT-GROUP - OBJECTS { - ospfRouterId, - ospfAdminStat, - ospfVersionNumber, - ospfAreaBdrRtrStatus, - ospfASBdrRtrStatus, - ospfExternLsaCount, - ospfExternLsaCksumSum, - ospfTOSSupport, - ospfOriginateNewLsas, - ospfRxNewLsas, - ospfExtLsdbLimit, - ospfMulticastExtensions, - ospfExitOverflowInterval, - ospfDemandExtensions - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems." - ::= { ospfGroups 1 } - - - ospfAreaGroup OBJECT-GROUP - OBJECTS { - ospfAreaId, - ospfImportAsExtern, - ospfSpfRuns, - ospfAreaBdrRtrCount, - ospfAsBdrRtrCount, - ospfAreaLsaCount, - ospfAreaLsaCksumSum, - ospfAreaSummary, - ospfAreaStatus - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems - supporting areas." - ::= { ospfGroups 2 } - - - ospfStubAreaGroup OBJECT-GROUP - OBJECTS { - ospfStubAreaId, - ospfStubTOS, - ospfStubMetric, - ospfStubStatus, - ospfStubMetricType - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems - supporting stub areas." - ::= { ospfGroups 3 } - - - ospfLsdbGroup OBJECT-GROUP - OBJECTS { - ospfLsdbAreaId, - ospfLsdbType, - ospfLsdbLsid, - ospfLsdbRouterId, - ospfLsdbSequence, - ospfLsdbAge, - ospfLsdbChecksum, - ospfLsdbAdvertisement - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems - that display their link state database." - ::= { ospfGroups 4 } - - - ospfAreaRangeGroup OBJECT-GROUP - OBJECTS { - ospfAreaRangeAreaId, - ospfAreaRangeNet, - ospfAreaRangeMask, - ospfAreaRangeStatus, - ospfAreaRangeEffect - } - STATUS obsolete - DESCRIPTION - "These objects are required for non-CIDR OSPF - systems that support multiple areas." - ::= { ospfGroups 5 } - - - ospfHostGroup OBJECT-GROUP - OBJECTS { - ospfHostIpAddress, - ospfHostTOS, - ospfHostMetric, - ospfHostStatus, - ospfHostAreaID - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems - that support attached hosts." - ::= { ospfGroups 6 } - - - ospfIfGroup OBJECT-GROUP - OBJECTS { - ospfIfIpAddress, - ospfAddressLessIf, - ospfIfAreaId, - ospfIfType, - ospfIfAdminStat, - ospfIfRtrPriority, - ospfIfTransitDelay, - ospfIfRetransInterval, - ospfIfHelloInterval, - ospfIfRtrDeadInterval, - ospfIfPollInterval, - ospfIfState, - ospfIfDesignatedRouter, - ospfIfBackupDesignatedRouter, - ospfIfEvents, - ospfIfAuthType, - ospfIfAuthKey, - ospfIfStatus, - ospfIfMulticastForwarding, - ospfIfDemand - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems." - ::= { ospfGroups 7 } - - - ospfIfMetricGroup OBJECT-GROUP - OBJECTS { - ospfIfMetricIpAddress, - ospfIfMetricAddressLessIf, - ospfIfMetricTOS, - ospfIfMetricValue, - ospfIfMetricStatus - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems." - ::= { ospfGroups 8 } - - - ospfVirtIfGroup OBJECT-GROUP - OBJECTS { - ospfVirtIfAreaId, - ospfVirtIfNeighbor, - ospfVirtIfTransitDelay, - ospfVirtIfRetransInterval, - ospfVirtIfHelloInterval, - ospfVirtIfRtrDeadInterval, - ospfVirtIfState, - ospfVirtIfEvents, - ospfVirtIfAuthType, - ospfVirtIfAuthKey, - ospfVirtIfStatus - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems." - ::= { ospfGroups 9 } - - - ospfNbrGroup OBJECT-GROUP - OBJECTS { - ospfNbrIpAddr, - ospfNbrAddressLessIndex, - ospfNbrRtrId, - ospfNbrOptions, - ospfNbrPriority, - ospfNbrState, - ospfNbrEvents, - ospfNbrLsRetransQLen, - ospfNbmaNbrStatus, - ospfNbmaNbrPermanence, - ospfNbrHelloSuppressed - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems." - ::= { ospfGroups 10 } - - - ospfVirtNbrGroup OBJECT-GROUP - OBJECTS { - ospfVirtNbrArea, - ospfVirtNbrRtrId, - ospfVirtNbrIpAddr, - ospfVirtNbrOptions, - ospfVirtNbrState, - ospfVirtNbrEvents, - ospfVirtNbrLsRetransQLen, - ospfVirtNbrHelloSuppressed - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems." - ::= { ospfGroups 11 } - - - ospfExtLsdbGroup OBJECT-GROUP - OBJECTS { - ospfExtLsdbType, - ospfExtLsdbLsid, - ospfExtLsdbRouterId, - ospfExtLsdbSequence, - ospfExtLsdbAge, - ospfExtLsdbChecksum, - ospfExtLsdbAdvertisement - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems - that display their link state database." - ::= { ospfGroups 12 } - - - ospfAreaAggregateGroup OBJECT-GROUP - OBJECTS { - ospfAreaAggregateAreaID, - ospfAreaAggregateLsdbType, - ospfAreaAggregateNet, - ospfAreaAggregateMask, - ospfAreaAggregateStatus, - ospfAreaAggregateEffect - } - STATUS current - DESCRIPTION - "These objects are required for OSPF systems." - ::= { ospfGroups 13 } - -END |