snmp: T3606: Install MIBs into well known location

FRR also expects the MIBs in /usr/share/snmp/mibs

1 files changed, 0 insertions, 530 deletions

diff --git a/data/mibs/RIPv2-MIB.txt b/data/mibs/RIPv2-MIB.txt
deleted file mode 100644
index 6c92fb5f0..000000000
--- a/data/mibs/RIPv2-MIB.txt
+++ /dev/null
@@ -1,530 +0,0 @@
-   RIPv2-MIB DEFINITIONS ::= BEGIN
-
-   IMPORTS
-       MODULE-IDENTITY, OBJECT-TYPE, Counter32,
-       TimeTicks, IpAddress                     FROM SNMPv2-SMI
-       TEXTUAL-CONVENTION, RowStatus            FROM SNMPv2-TC
-       MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
-       mib-2                                    FROM RFC1213-MIB;
-
-   --  This MIB module uses the extended OBJECT-TYPE macro as
-   --  defined in [9].
-
-   rip2  MODULE-IDENTITY
-           LAST-UPDATED "9407272253Z"      -- Wed Jul 27 22:53:04 PDT 1994
-           ORGANIZATION "IETF RIP-II Working Group"
-           CONTACT-INFO
-          "       Fred Baker
-          Postal: Cisco Systems
-                  519 Lado Drive
-                  Santa Barbara, California 93111
-          Tel:    +1 805 681 0115
-          E-Mail: fbaker@cisco.com
-
-          Postal: Gary Malkin
-                  Xylogics, Inc.
-                  53 Third Avenue
-                  Burlington, MA  01803
-
-          Phone:  (617) 272-8140
-          EMail:  gmalkin@Xylogics.COM"
-      DESCRIPTION
-         "The MIB module to describe the RIP2 Version 2 Protocol"
-     ::= { mib-2 23 }
-
- --  RIP-2 Management Information Base
-
- -- the RouteTag type represents the contents of the
- -- Route Domain field in the packet header or route entry.
- -- The use of the Route Domain is deprecated.
-
- RouteTag ::= TEXTUAL-CONVENTION
-     STATUS      current
-     DESCRIPTION
-        "the RouteTag type represents the contents of the Route Domain
-        field in the packet header or route entry"
-    SYNTAX      OCTET STRING (SIZE (2))
-
---4.1 Global Counters
-
---      The RIP-2 Globals Group.
---      Implementation of this group is mandatory for systems
---      which implement RIP-2.
-
--- These counters are intended to facilitate debugging quickly
--- changing routes or failing neighbors
-
-rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
-
-    rip2GlobalRouteChanges OBJECT-TYPE
-        SYNTAX   Counter32
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The number of route changes made to the IP Route
-           Database by RIP.  This does not include the refresh
-           of a route's age."
-       ::= { rip2Globals 1 }
-
-    rip2GlobalQueries OBJECT-TYPE
-        SYNTAX   Counter32
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The number of responses sent to RIP queries
-           from other systems."
-       ::= { rip2Globals 2 }
-
---4.2 RIP Interface Tables
-
---  RIP Interfaces Groups
---  Implementation of these Groups is mandatory for systems
---  which implement RIP-2.
-
--- The RIP Interface Status Table.
-
-    rip2IfStatTable OBJECT-TYPE
-        SYNTAX   SEQUENCE OF Rip2IfStatEntry
-        MAX-ACCESS   not-accessible
-        STATUS   current
-        DESCRIPTION
-           "A list of subnets which require separate
-           status monitoring in RIP."
-       ::= { rip2 2 }
-
-   rip2IfStatEntry OBJECT-TYPE
-       SYNTAX   Rip2IfStatEntry
-       MAX-ACCESS   not-accessible
-       STATUS   current
-       DESCRIPTION
-          "A Single Routing Domain in a single Subnet."
-      INDEX { rip2IfStatAddress }
-      ::= { rip2IfStatTable 1 }
-
-    Rip2IfStatEntry ::=
-        SEQUENCE {
-            rip2IfStatAddress
-                IpAddress,
-            rip2IfStatRcvBadPackets
-                Counter32,
-            rip2IfStatRcvBadRoutes
-                Counter32,
-            rip2IfStatSentUpdates
-                Counter32,
-            rip2IfStatStatus
-                RowStatus
-    }
-
-    rip2IfStatAddress OBJECT-TYPE
-        SYNTAX   IpAddress
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The IP Address of this system on the indicated
-           subnet. For unnumbered interfaces, the value 0.0.0.N,
-           where the least significant 24 bits (N) is the ifIndex
-           for the IP Interface in network byte order."
-       ::= { rip2IfStatEntry 1 }
-
-    rip2IfStatRcvBadPackets OBJECT-TYPE
-        SYNTAX   Counter32
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The number of RIP response packets received by
-           the RIP process which were subsequently discarded
-           for any reason (e.g. a version 0 packet, or an
-           unknown command type)."
-       ::= { rip2IfStatEntry 2 }
-
-    rip2IfStatRcvBadRoutes OBJECT-TYPE
-        SYNTAX   Counter32
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The number of routes, in valid RIP packets,
-           which were ignored for any reason (e.g. unknown
-           address family, or invalid metric)."
-       ::= { rip2IfStatEntry 3 }
-
-    rip2IfStatSentUpdates OBJECT-TYPE
-        SYNTAX   Counter32
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The number of triggered RIP updates actually
-           sent on this interface.  This explicitly does
-           NOT include full updates sent containing new
-           information."
-       ::= { rip2IfStatEntry 4 }
-
-    rip2IfStatStatus OBJECT-TYPE
-        SYNTAX   RowStatus
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "Writing invalid has the effect of deleting
-           this interface."
-       ::= { rip2IfStatEntry 5 }
-
--- The RIP Interface Configuration Table.
-
-    rip2IfConfTable OBJECT-TYPE
-        SYNTAX   SEQUENCE OF Rip2IfConfEntry
-        MAX-ACCESS   not-accessible
-        STATUS   current
-        DESCRIPTION
-           "A list of subnets which require separate
-           configuration in RIP."
-       ::= { rip2 3 }
-
-   rip2IfConfEntry OBJECT-TYPE
-       SYNTAX   Rip2IfConfEntry
-       MAX-ACCESS   not-accessible
-       STATUS   current
-       DESCRIPTION
-          "A Single Routing Domain in a single Subnet."
-      INDEX { rip2IfConfAddress }
-      ::= { rip2IfConfTable 1 }
-
-    Rip2IfConfEntry ::=
-        SEQUENCE {
-            rip2IfConfAddress
-                IpAddress,
-            rip2IfConfDomain
-                RouteTag,
-            rip2IfConfAuthType
-                INTEGER,
-            rip2IfConfAuthKey
-                OCTET STRING (SIZE(0..16)),
-            rip2IfConfSend
-                INTEGER,
-            rip2IfConfReceive
-                INTEGER,
-            rip2IfConfDefaultMetric
-                INTEGER,
-            rip2IfConfStatus
-                RowStatus,
-            rip2IfConfSrcAddress
-                IpAddress
-    }
-
-    rip2IfConfAddress OBJECT-TYPE
-        SYNTAX   IpAddress
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The IP Address of this system on the indicated
-           subnet.  For unnumbered interfaces, the value 0.0.0.N,
-           where the least significant 24 bits (N) is the ifIndex
-           for the IP Interface in network byte order."
-       ::= { rip2IfConfEntry 1 }
-
-    rip2IfConfDomain OBJECT-TYPE
-        SYNTAX   RouteTag
-        MAX-ACCESS   read-create
-        STATUS   obsolete
-        DESCRIPTION
-           "Value inserted into the Routing Domain field
-           of all RIP packets sent on this interface."
-       DEFVAL { '0000'h }
-       ::= { rip2IfConfEntry 2 }
-
-    rip2IfConfAuthType OBJECT-TYPE
-        SYNTAX   INTEGER {
-                    noAuthentication (1),
-                    simplePassword (2),
-                    md5 (3)
-                 }
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "The type of Authentication used on this
-           interface."
-       DEFVAL { noAuthentication }
-       ::= { rip2IfConfEntry 3 }
-
-    rip2IfConfAuthKey OBJECT-TYPE
-        SYNTAX   OCTET STRING (SIZE(0..16))
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "The value to be used as the Authentication Key
-           whenever the corresponding instance of
-           rip2IfConfAuthType has a value other than
-           noAuthentication.  A modification of the corresponding
-           instance of rip2IfConfAuthType does not modify
-           the rip2IfConfAuthKey value.  If a string shorter
-           than 16 octets is supplied, it will be left-
-           justified and padded to 16 octets, on the right,
-           with nulls (0x00).
-
-           Reading this object always results in an  OCTET
-           STRING of length zero; authentication may not
-           be bypassed by reading the MIB object."
-       DEFVAL { ''h }
-       ::= { rip2IfConfEntry 4 }
-
-    rip2IfConfSend OBJECT-TYPE
-        SYNTAX   INTEGER {
-                    doNotSend (1),
-                    ripVersion1 (2),
-                    rip1Compatible (3),
-                    ripVersion2 (4),
-                    ripV1Demand (5),
-                    ripV2Demand (6)
-                 }
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "What the router sends on this interface.
-           ripVersion1 implies sending RIP updates compliant
-           with  RFC  1058.   rip1Compatible implies
-           broadcasting RIP-2 updates using RFC 1058 route
-           subsumption rules.  ripVersion2 implies
-           multicasting RIP-2 updates.  ripV1Demand indicates
-           the use of Demand RIP on a WAN interface under RIP
-           Version 1 rules.  ripV2Demand indicates the use of
-           Demand RIP on a WAN interface under Version 2 rules."
-       DEFVAL { rip1Compatible }
-       ::= { rip2IfConfEntry 5 }
-
-    rip2IfConfReceive OBJECT-TYPE
-        SYNTAX   INTEGER {
-                    rip1 (1),
-                    rip2 (2),
-                    rip1OrRip2 (3),
-                    doNotRecieve (4)
-                 }
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "This indicates which version of RIP updates
-           are to be accepted.  Note that rip2 and
-           rip1OrRip2 implies reception of multicast
-           packets."
-       DEFVAL { rip1OrRip2 }
-       ::= { rip2IfConfEntry 6 }
-
-    rip2IfConfDefaultMetric OBJECT-TYPE
-        SYNTAX   INTEGER ( 0..15 )
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "This variable indicates the metric that is to
-           be used for the default route entry in RIP updates
-           originated on this interface.  A value of zero
-           indicates that no default route should be
-           originated; in this case, a default route via
-           another router may be propagated."
-       ::= { rip2IfConfEntry 7 }
-
-    rip2IfConfStatus OBJECT-TYPE
-        SYNTAX   RowStatus
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "Writing invalid has  the  effect  of  deleting
-           this interface."
-       ::= { rip2IfConfEntry 8 }
-
-    rip2IfConfSrcAddress OBJECT-TYPE
-        SYNTAX   IpAddress
-        MAX-ACCESS   read-create
-        STATUS   current
-        DESCRIPTION
-           "The IP Address this system will use as a source
-            address on this interface.  If it is a numbered
-            interface, this MUST be the same value as
-            rip2IfConfAddress.  On unnumbered interfaces,
-            it must be the value of rip2IfConfAddress for
-            some interface on the system."
-       ::= { rip2IfConfEntry 9 }
-
---4.3 Peer Table
-
---  Peer Table
-
---      The RIP Peer Group
---      Implementation of this Group is Optional
-
---      This group provides information about active peer
---      relationships intended to assist in debugging.  An
---      active peer is a router from which a valid RIP
---      updated has been heard in the last 180 seconds.
-
-    rip2PeerTable OBJECT-TYPE
-        SYNTAX   SEQUENCE OF Rip2PeerEntry
-        MAX-ACCESS   not-accessible
-        STATUS   current
-        DESCRIPTION
-           "A list of RIP Peers."
-       ::= { rip2 4 }
-
-   rip2PeerEntry OBJECT-TYPE
-       SYNTAX   Rip2PeerEntry
-       MAX-ACCESS   not-accessible
-       STATUS   current
-       DESCRIPTION
-          "Information regarding a single routing peer."
-      INDEX { rip2PeerAddress, rip2PeerDomain }
-      ::= { rip2PeerTable 1 }
-
-    Rip2PeerEntry ::=
-        SEQUENCE {
-            rip2PeerAddress
-                IpAddress,
-            rip2PeerDomain
-                RouteTag,
-            rip2PeerLastUpdate
-                TimeTicks,
-            rip2PeerVersion
-                INTEGER,
-            rip2PeerRcvBadPackets
-                Counter32,
-            rip2PeerRcvBadRoutes
-                Counter32
-            }
-
-    rip2PeerAddress OBJECT-TYPE
-        SYNTAX   IpAddress
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The IP Address that the peer is using as its source
-            address.  Note that on an unnumbered link, this may
-            not be a member of any subnet on the system."
-       ::= { rip2PeerEntry 1 }
-
-    rip2PeerDomain OBJECT-TYPE
-        SYNTAX   RouteTag
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The value in the Routing Domain field  in  RIP
-           packets received from the peer.  As domain suuport
-           is deprecated, this must be zero."
-       ::= { rip2PeerEntry 2 }
-
-    rip2PeerLastUpdate OBJECT-TYPE
-        SYNTAX   TimeTicks
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The value of sysUpTime when the most recent
-           RIP update was received from this system."
-       ::= { rip2PeerEntry 3 }
-
-    rip2PeerVersion OBJECT-TYPE
-        SYNTAX   INTEGER ( 0..255 )
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The RIP version number in the header of the
-           last RIP packet received."
-       ::= { rip2PeerEntry 4 }
-
-    rip2PeerRcvBadPackets OBJECT-TYPE
-        SYNTAX   Counter32
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The number of RIP response packets from this
-           peer discarded as invalid."
-       ::= { rip2PeerEntry 5 }
-
-
-    rip2PeerRcvBadRoutes OBJECT-TYPE
-        SYNTAX   Counter32
-        MAX-ACCESS   read-only
-        STATUS   current
-        DESCRIPTION
-           "The number of routes from this peer that were
-           ignored because the entry format was invalid."
-       ::= { rip2PeerEntry 6 }
-
--- conformance information
-
-rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
-
-rip2Groups      OBJECT IDENTIFIER ::= { rip2Conformance 1 }
-rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
-
--- compliance statements
-rip2Compliance MODULE-COMPLIANCE
-    STATUS  current
-    DESCRIPTION
-       "The compliance statement "
-    MODULE  -- this module
-    MANDATORY-GROUPS {
-                 rip2GlobalGroup,
-                 rip2IfStatGroup,
-                 rip2IfConfGroup,
-                 rip2PeerGroup
-        }
-    GROUP       rip2GlobalGroup
-    DESCRIPTION
-       "This group defines global controls for RIP-II systems."
-    GROUP       rip2IfStatGroup
-    DESCRIPTION
-       "This group defines interface statistics for RIP-II systems."
-    GROUP       rip2IfConfGroup
-    DESCRIPTION
-       "This group defines interface configuration for RIP-II systems."
-    GROUP       rip2PeerGroup
-    DESCRIPTION
-       "This group defines peer information for RIP-II systems."
-    ::= { rip2Compliances 1 }
-
--- units of conformance
-
-rip2GlobalGroup    OBJECT-GROUP
-    OBJECTS {
-                rip2GlobalRouteChanges,
-                rip2GlobalQueries
-    }
-    STATUS  current
-    DESCRIPTION
-       "This group defines global controls for RIP-II systems."
-    ::= { rip2Groups 1 }
-rip2IfStatGroup    OBJECT-GROUP
-    OBJECTS {
-            rip2IfStatAddress,
-            rip2IfStatRcvBadPackets,
-            rip2IfStatRcvBadRoutes,
-            rip2IfStatSentUpdates,
-            rip2IfStatStatus
-    }
-    STATUS  current
-    DESCRIPTION
-       "This group defines interface statistics for RIP-II systems."
-    ::= { rip2Groups 2 }
-rip2IfConfGroup    OBJECT-GROUP
-    OBJECTS {
-            rip2IfConfAddress,
-            rip2IfConfAuthType,
-            rip2IfConfAuthKey,
-            rip2IfConfSend,
-            rip2IfConfReceive,
-            rip2IfConfDefaultMetric,
-            rip2IfConfStatus,
-            rip2IfConfSrcAddress
-    }
-    STATUS  current
-    DESCRIPTION
-       "This group defines interface configuration for RIP-II systems."
-    ::= { rip2Groups 3 }
-rip2PeerGroup    OBJECT-GROUP
-    OBJECTS {
-            rip2PeerAddress,
-            rip2PeerDomain,
-            rip2PeerLastUpdate,
-            rip2PeerVersion,
-            rip2PeerRcvBadPackets,
-            rip2PeerRcvBadRoutes
-    }
-    STATUS  current
-    DESCRIPTION
-       "This group defines peer information for RIP-II systems."
-    ::= { rip2Groups 4 }
-END