console-server: T2490: move CLI parsing to get_config_dict()

For more examples on the new get_config_dict() approach migrate this
implementation as it is not yet in production use. Also this serves as proof of
concept code for further migrations.

1 files changed, 0 insertions, 76 deletions

diff --git a/data/templates/ser2net/ser2net.conf.tmpl b/data/templates/ser2net/ser2net.conf.tmpl
deleted file mode 100644
index 0e946e84e..000000000
--- a/data/templates/ser2net/ser2net.conf.tmpl
+++ /dev/null
@@ -1,76 +0,0 @@
-### Autogenerated by ser2net.py ###
-
-# This is the configuration file for ser2net.  It has the following format:
-#  <TCP port>:<state>:<timeout>:<device>:<options>
-#     TCP port
-#            Name   or  number of the TCP/IP port to accept con-
-#            nections from for this device.  A port number may
-#            be of the form [host,]port, such as 127.0.0.1,2000
-#            or localhost,2000.  If this is specified, it will
-#            only bind to the IP address specified. Otherwise
-#            it will bind to all the ports on the machine.
-#
-#     state  Either raw or rawlp or telnet or off.  off disables
-#            the  port  from  accepting  connections.  It can be
-#            turned on later from the control port.  raw enables
-#            the port and  transfers  all data as-is between the
-#            port  and  the long.  rawlp  enables  the port  and
-#            transfers  all input data to device, device is open
-#            without  any  termios  setting.  It  allow  to  use
-#            /dev/lpX  devices  and  printers connected to them.
-#            telnet enables the port and runs the telnet  proto-
-#            col  on the port to set up telnet parameters.  This
-#            is most useful for using telnet.
-#
-#     timeout
-#            The time (in seconds) before the port will be  dis-
-#            connected  if  there  is no activity on it.  A zero
-#            value disables this funciton.
-#
-#     device The  name  of  the  device   to  connect  to.  This
-#            must be in the form of /dev/<device>.
-#
-#     options
-#            Sets  operational  parameters  for the serial port.
-#            Options 300, 1200, 2400, 4800, 9600, 19200, 38400,
-#            57600, 115200 set the various baud rates.  EVEN,
-#            ODD, NONE set the parity.  1STOPBIT, 2STOPBITS set
-#            the number of stop bits.  7DATABITS, 8DATABITS set
-#            the number of data bits.  [-]XONXOFF turns on (-
-#            off) XON/XOFF support.  [-]RTSCTS turns on (- off)
-#            hardware flow control, [-]LOCAL turns off (- on)
-#            monitoring of the modem lines, and
-#            [-]HANGUP_WHEN_DONE turns on (- off) lowering the
-#            modem control lines when the connextion is done.
-#            NOBREAK disables automatic setting of the break
-#            setting of the serial port.
-#            The "remctl" option allow remote control (ala RFC
-#            2217) of serial-port configuration.  A banner name
-#            may also be specified, that banner will be printed
-#            for the line.  If no banner is given, then no
-#            banner is printed.
-#
-# or...
-
-#  BANNER:<banner name>:banner
-#    This will create a banner, if the banner name is given in the
-#    options of a line, that banner will be printed.  This takes the
-#    standard "C" \x characters (\r is carraige return, \n is newline,
-#    etc.).  It also accepts \d, which prints the device name, \p,
-#    which prints the TCP port number, and \s which prints the serial
-#    parameters (eg 9600N81).  Banners can span lines if the last
-#    character on a line is '\'.  Note that you *must* use \r\n to
-#    start a new line.
-#
-# Note that the same device can be listed multiple times under different
-# ports, this allows the same serial port to have both telnet and raw
-# protocols.
-
-# The original config file shipped with the upstream sources can be
-# found in /usr/share/doc/ser2net/examples
-
-BANNER:banner:\r\nConnected to serial proxy device \d [\s]\r\n\r\n
-
-{% for d in devices %}
-localhost,{{ d.port }}:telnet:{{ d.timeout }}:{{ d.serial_port }}:{{ d.speed }} {{ d.data_bits}}DATABITS {{ d.parity | upper }} {{ d.stop_bits}}STOPBIT banner
-{% endfor %}