wifi: T4353: fix Jinja2 linting errors

1 files changed, 0 insertions, 83 deletions

diff --git a/data/templates/wifi/wpa_supplicant.conf.tmpl b/data/templates/wifi/wpa_supplicant.conf.tmpl
deleted file mode 100644
index 56cd35a35..000000000
--- a/data/templates/wifi/wpa_supplicant.conf.tmpl
+++ /dev/null
@@ -1,83 +0,0 @@
-### Autogenerated by interfaces-macsec.py ###
-
-# see full documentation:
-# https://w1.fi/cgit/hostap/plain/wpa_supplicant/wpa_supplicant.conf
-
-network={
-    # ssid: SSID (mandatory); network name in one of the optional formats:
-    #   - an ASCII string with double quotation
-    #   - a hex string (two characters per octet of SSID)
-    #   - a printf-escaped ASCII string P"<escaped string>"
-    #
-    ssid="{{ ssid }}"
-
-    # scan_ssid:
-    #   0 = do not scan this SSID with specific Probe Request frames (default)
-    #   1 = scan with SSID-specific Probe Request frames (this can be used to
-    #       find APs that do not accept broadcast SSID or use multiple SSIDs;
-    #       this will add latency to scanning, so enable this only when needed)
-    scan_ssid=1
-
-{% if security.wpa.passphrase is vyos_defined %}
-    # ieee80211w: whether management frame protection is enabled
-    # 0 = disabled (default unless changed with the global pmf parameter)
-    # 1 = optional
-    # 2 = required
-    # The most common configuration options for this based on the PMF (protected
-    # management frames) certification program are:
-    # PMF enabled: ieee80211w=1 and key_mgmt=WPA-EAP WPA-EAP-SHA256
-    # PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256
-    # (and similarly for WPA-PSK and WPA-PSK-SHA256 if WPA2-Personal is used)
-    # WPA3-Personal-only mode: ieee80211w=2 and key_mgmt=SAE
-    ieee80211w=1
-
-    # key_mgmt: list of accepted authenticated key management protocols
-    # WPA-PSK = WPA pre-shared key (this requires 'psk' field)
-    # WPA-EAP = WPA using EAP authentication
-    # IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
-    #	generated WEP keys
-    # NONE = WPA is not used; plaintext or static WEP could be used
-    # WPA-NONE = WPA-None for IBSS (deprecated; use proto=RSN key_mgmt=WPA-PSK
-    #	instead)
-    # FT-PSK = Fast BSS Transition (IEEE 802.11r) with pre-shared key
-    # FT-EAP = Fast BSS Transition (IEEE 802.11r) with EAP authentication
-    # FT-EAP-SHA384 = Fast BSS Transition (IEEE 802.11r) with EAP authentication
-    #	and using SHA384
-    # WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms
-    # WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms
-    # SAE = Simultaneous authentication of equals; pre-shared key/password -based
-    #	authentication with stronger security than WPA-PSK especially when using
-    #	not that strong password; a.k.a. WPA3-Personal
-    # FT-SAE = SAE with FT
-    # WPA-EAP-SUITE-B = Suite B 128-bit level
-    # WPA-EAP-SUITE-B-192 = Suite B 192-bit level
-    # OSEN = Hotspot 2.0 Rel 2 online signup connection
-    # FILS-SHA256 = Fast Initial Link Setup with SHA256
-    # FILS-SHA384 = Fast Initial Link Setup with SHA384
-    # FT-FILS-SHA256 = FT and Fast Initial Link Setup with SHA256
-    # FT-FILS-SHA384 = FT and Fast Initial Link Setup with SHA384
-    # OWE = Opportunistic Wireless Encryption (a.k.a. Enhanced Open)
-    # DPP = Device Provisioning Protocol
-    # If not set, this defaults to: WPA-PSK WPA-EAP
-{%   if security.wpa.mode is vyos_defined('wpa3') %}
-    key_mgmt=SAE
-{%   else %}
-    key_mgmt=WPA-PSK WPA-PSK-SHA256
-{%   endif %}
-
-    # psk: WPA preshared key; 256-bit pre-shared key
-    # The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
-    # 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
-    # generated using the passphrase and SSID). ASCII passphrase must be between
-    # 8 and 63 characters (inclusive). ext:<name of external PSK field> format can
-    # be used to indicate that the PSK/passphrase is stored in external storage.
-    # This field is not needed, if WPA-EAP is used.
-    # Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
-    # from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
-    # startup and reconfiguration time can be optimized by generating the PSK only
-    # only when the passphrase or SSID has actually changed.
-    psk="{{ security.wpa.passphrase }}"
-{% else %}
-    key_mgmt=NONE
-{% endif %}
-}