vif: T3349: use fixed ordering when enabling parent and child interface

When a VIF/VLAN interface is placed in admin down state but the lower
interface, serving the vlan, is moved from admin down -> admin up, all its
vlan interfaces will be placed in admin up state, too.

This is bad as a VLAN interface will become admin up even if its specified as
admin down after a reboot.

To reproduce:
  set interfaces ethernet eth1 vif 20 disable
  set interfaces ethernet eth1 disable
  commit

  delete interfaces ethernet eth1 disable
  commit

Now check the interface state and it returns UP,LOWER_UP
7: eth1.20@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 00:50:56:b3:09:07 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::250:56ff:feb3:907/64 scope link
       valid_lft forever preferred_lft forever

(cherry picked from commit 49bc3f1e3ff8416908fc986bb60b444a75a1722d)

15 files changed, 17 insertions, 254 deletions

diff --git a/python/vyos/ifconfig/bond.py b/python/vyos/ifconfig/bond.py
index 709222b09..199c69dde 100644
--- a/python/vyos/ifconfig/bond.py
+++ b/python/vyos/ifconfig/bond.py
@@ -343,9 +343,6 @@ class BondIf(Interface):
         if 'shutdown_required' in config:
             self.set_admin_state('down')
 
-        # call base class first
-        super().update(config)
-
         # ARP monitor targets need to be synchronized between sysfs and CLI.
         # Unfortunately an address can't be send twice to sysfs as this will
         # result in the following exception:  OSError: [Errno 22] Invalid argument.
@@ -404,12 +401,5 @@ class BondIf(Interface):
         value = config.get('primary')
         if value: self.set_primary(value)
 
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
+        # call base class first
+        super().update(config)
diff --git a/python/vyos/ifconfig/bridge.py b/python/vyos/ifconfig/bridge.py
index 76520f2ba..116ed22c0 100644
--- a/python/vyos/ifconfig/bridge.py
+++ b/python/vyos/ifconfig/bridge.py
@@ -235,11 +235,6 @@ class BridgeIf(Interface):
         interface setup code and provide a single point of entry when workin
         on any interface. """
 
-        # call base class first
-        super().update(config)
-
-        ifname = config['ifname']
-
         # Set ageing time
         value = config.get('aging')
         self.set_ageing_time(value)
@@ -279,6 +274,7 @@ class BridgeIf(Interface):
         vlan_del = set()
         vlan_add = set()
 
+        ifname = config['ifname']
         tmp = dict_search('member.interface', config)
         if tmp:
             if self.get_vlan_filter():
@@ -327,7 +323,6 @@ class BridgeIf(Interface):
 
                 tmp = dict_search('allowed_vlan_removed', interface_config)
 
-
                 for vlan_id in (tmp or []):
                     cmd = f'bridge vlan del dev {interface} vid {vlan_id}'
                     self._cmd(cmd)
@@ -373,12 +368,5 @@ class BridgeIf(Interface):
         self.set_vlan_filter(vlan_filter)
 
 
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
+        # call base class first
+        super().update(config)
diff --git a/python/vyos/ifconfig/dummy.py b/python/vyos/ifconfig/dummy.py
index 19ef9d304..f2a4106e6 100644
--- a/python/vyos/ifconfig/dummy.py
+++ b/python/vyos/ifconfig/dummy.py
@@ -33,22 +33,3 @@ class DummyIf(Interface):
             'prefixes': ['dum', ],
         },
     }
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py
index 547b54b84..186a2d094 100644
--- a/python/vyos/ifconfig/ethernet.py
+++ b/python/vyos/ifconfig/ethernet.py
@@ -321,9 +321,6 @@ class EthernetIf(Interface):
         interface setup code and provide a single point of entry when workin
         on any interface. """
 
-        # call base class first
-        super().update(config)
-
         # disable ethernet flow control (pause frames)
         value = 'off' if 'disable_flow_control' in config else 'on'
         self.set_flow_control(value)
@@ -357,12 +354,5 @@ class EthernetIf(Interface):
             for b_type in config['ring_buffer']:
                 self.set_ring_buffer(b_type, config['ring_buffer'][b_type])
 
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
+        # call base class first
+        super().update(config)
diff --git a/python/vyos/ifconfig/geneve.py b/python/vyos/ifconfig/geneve.py
index 5c4597be8..0a3711dab 100644
--- a/python/vyos/ifconfig/geneve.py
+++ b/python/vyos/ifconfig/geneve.py
@@ -49,22 +49,3 @@ class GeneveIf(Interface):
 
         # interface is always A/D down. It needs to be enabled explicitly
         self.set_admin_state('down')
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py
index fea411319..59a87dcef 100644
--- a/python/vyos/ifconfig/interface.py
+++ b/python/vyos/ifconfig/interface.py
@@ -1252,6 +1252,16 @@ class Interface(Control):
         # configure port mirror
         self.set_mirror()
 
+        # Enable/Disable of an interface must always be done at the end of the
+        # derived class to make use of the ref-counting set_admin_state()
+        # function. We will only enable the interface if 'up' was called as
+        # often as 'down'. This is required by some interface implementations
+        # as certain parameters can only be changed when the interface is
+        # in admin-down state. This ensures the link does not flap during
+        # reconfiguration.
+        state = 'down' if 'disable' in config else 'up'
+        self.set_admin_state(state)
+
         # remove no longer required 802.1ad (Q-in-Q VLANs)
         ifname = config['ifname']
         for vif_s_id in config.get('vif_s_remove', {}):
@@ -1380,22 +1390,3 @@ class VLANIf(Interface):
 
     def set_mirror(self):
         return
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/l2tpv3.py b/python/vyos/ifconfig/l2tpv3.py
index 8ed3d5afb..76d6e6311 100644
--- a/python/vyos/ifconfig/l2tpv3.py
+++ b/python/vyos/ifconfig/l2tpv3.py
@@ -94,24 +94,3 @@ class L2TPv3If(Interface):
             if self.config['tunnel_id']:
                 cmd = 'ip l2tp del tunnel tunnel_id {tunnel_id}'
                 self._cmd(cmd.format(**self.config))
-    
-    
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
-
diff --git a/python/vyos/ifconfig/loopback.py b/python/vyos/ifconfig/loopback.py
index 0e632d826..e911ecbd9 100644
--- a/python/vyos/ifconfig/loopback.py
+++ b/python/vyos/ifconfig/loopback.py
@@ -70,13 +70,3 @@ class LoopbackIf(Interface):
 
         # call base class
         super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/macsec.py b/python/vyos/ifconfig/macsec.py
index 456686ea6..a229eaed5 100644
--- a/python/vyos/ifconfig/macsec.py
+++ b/python/vyos/ifconfig/macsec.py
@@ -55,22 +55,3 @@ class MACsecIf(Interface):
 
         # interface is always A/D down. It needs to be enabled explicitly
         self.set_admin_state('down')
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/macvlan.py b/python/vyos/ifconfig/macvlan.py
index 2447fec77..894215539 100644
--- a/python/vyos/ifconfig/macvlan.py
+++ b/python/vyos/ifconfig/macvlan.py
@@ -51,22 +51,3 @@ class MACVLANIf(Interface):
         ifname = self.config['ifname']
         cmd = f'ip link set dev {ifname} type macvlan mode {mode}'
         return self._cmd(cmd)
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/tunnel.py b/python/vyos/ifconfig/tunnel.py
index 1af4f8e72..90dcac0f2 100644
--- a/python/vyos/ifconfig/tunnel.py
+++ b/python/vyos/ifconfig/tunnel.py
@@ -112,25 +112,6 @@ class _Tunnel(Interface):
         mac.dialect = mac_unix_expanded
         return str(mac)
 
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
-
 class GREIf(_Tunnel):
     """
     GRE: Generic Routing Encapsulation
diff --git a/python/vyos/ifconfig/vtun.py b/python/vyos/ifconfig/vtun.py
index 99a592b3e..2c6e126d5 100644
--- a/python/vyos/ifconfig/vtun.py
+++ b/python/vyos/ifconfig/vtun.py
@@ -51,22 +51,3 @@ class VTunIf(Interface):
     def del_addr(self, addr):
         # IP addresses are managed by OpenVPN daemon
         pass
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/vxlan.py b/python/vyos/ifconfig/vxlan.py
index ad1f605ed..202e9d81c 100644
--- a/python/vyos/ifconfig/vxlan.py
+++ b/python/vyos/ifconfig/vxlan.py
@@ -94,22 +94,3 @@ class VXLANIf(Interface):
             cmd += ' {} {}'.format(self.mapping.get(key, key), value)
 
         self._cmd(cmd)
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/wireguard.py b/python/vyos/ifconfig/wireguard.py
index 9ee798ee8..33f59b57e 100644
--- a/python/vyos/ifconfig/wireguard.py
+++ b/python/vyos/ifconfig/wireguard.py
@@ -261,14 +261,3 @@ class WireGuardIf(Interface):
 
         # call base class
         super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
-
diff --git a/python/vyos/ifconfig/wireless.py b/python/vyos/ifconfig/wireless.py
index 37703d242..0efe38d59 100644
--- a/python/vyos/ifconfig/wireless.py
+++ b/python/vyos/ifconfig/wireless.py
@@ -71,24 +71,3 @@ class WiFiIf(Interface):
         # re-add ourselves to any bridge we might have fallen out of
         if bridge_member:
             self.add_to_bridge(bridge_member)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
-
-
-@Interface.register
-class WiFiModemIf(WiFiIf):
-    definition = {
-        **WiFiIf.definition,
-        **{
-            'section': 'wirelessmodem',
-            'prefixes': ['wlm', ],
-        }
-    }