Merge branch 't393-lldp-rewrite' of github.com:c-po/vyos-1x into current

* 't393-lldp-rewrite' of github.com:c-po/vyos-1x:
  lldp: T393: support both ELIN and ccordinate based location service in MED fixup
  lldp: T393: support IPv6 management address
  lldp: T393: add Emergency Location Identifier Number (ELIN) support
  lldp: T393: support parsing MED values
  lldp: T393: use flat dictionary when generating configs
  lldp: T393: support listen interfaces
  lldp: T393: add config options to /etc/lldpd.d
  lldp: T393: interface disable node must be valueless
  lldp: T393: first op mode command version
  lldp: T393: first running version of lldpd
  lldp: T393: 'snmp enable' must be <valueless/>
  lldp: T393: legacy-protocols must be <valueless/>
  Debian: lldp: T393: add lldpd dependency
  lldp: T393: rename XML interface definition to xml.in
  Revert "[LLDP] Remove the lldp.xml interface definition to avoid template ..."

1 files changed, 164 insertions, 0 deletions

diff --git a/src/op_mode/lldp_op.py b/src/op_mode/lldp_op.py
new file mode 100755
index 000000000..4d8fdbc99
--- /dev/null
+++ b/src/op_mode/lldp_op.py
@@ -0,0 +1,164 @@
+#!/usr/bin/env python3
+#
+# Copyright (C) 2019 VyOS maintainers and contributors
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+import argparse
+import jinja2
+
+from xml.dom import minidom
+from sys import exit
+from subprocess import Popen, PIPE, STDOUT
+from tabulate import tabulate
+
+parser = argparse.ArgumentParser()
+parser.add_argument("-a", "--all", action="store_true", help="Show LLDP neighbors on all interfaces")
+parser.add_argument("-i", "--interface", action="store", help="Show LLDP neighbors on specific interface")
+
+# Please be careful if you edit the template.
+lldp_out = """Capability Codes: R - Router, B - Bridge, W - Wlan r - Repeater, S - Station
+                  D - Docsis, T - Telephone, O - Other
+
+Device ID                 Local     Proto  Cap   Platform             Port ID
+---------                 -----     -----  ---   --------             -------
+{% for n in neighbors -%}
+{{ "%-25s" | format(n.chassis) }} {{ "%-9s" | format(n.interface) }} {{ "%-6s" | format(n.proto) }} {{ "%-5s" | format(n.cap) }} {{ "%-20s" | format(n.platform) }} {{ n.port }}
+{% endfor -%}
+"""
+
+def _get_neighbors():
+    command = '/usr/sbin/lldpcli -f xml show neighbors'
+    p = Popen(command, stdout=PIPE, stderr=STDOUT, shell=True)
+    tmp = p.communicate()[0].strip()
+    return tmp.decode()
+
+def extract_neighbor(neighbor):
+    """
+    Extract LLDP neighbor information from XML document passed as param neighbor
+
+    <lldp>
+     <interface label="Interface" name="eth0" via="LLDP" rid="3" age="0 day, 00:17:42">
+      <chassis label="Chassis">
+       <id label="ChassisID" type="mac">00:50:56:9d:a6:11</id>
+       <name label="SysName">VyOS</name>
+       <descr label="SysDescr">VyOS unknown</descr>
+       <mgmt-ip label="MgmtIP">172.18.254.203</mgmt-ip>
+       <mgmt-ip label="MgmtIP">fe80::250:56ff:fe9d:a611</mgmt-ip>
+       <capability label="Capability" type="Bridge" enabled="off"/>
+       <capability label="Capability" type="Router" enabled="on"/>
+       <capability label="Capability" type="Wlan" enabled="off"/>
+       <capability label="Capability" type="Station" enabled="off"/>
+      </chassis>
+      <port label="Port">
+       <id label="PortID" type="mac">00:50:56:9d:a6:11</id>
+       <descr label="PortDescr">eth0</descr>
+       <ttl label="TTL">120</ttl>
+       <auto-negotiation label="PMD autoneg" supported="no" enabled="no">
+        <current label="MAU oper type">10GigBaseCX4 - X copper over 8 pair 100-Ohm balanced cable</current>
+       </auto-negotiation>
+      </port>
+      <vlan label="VLAN" vlan-id="203">eth0.203</vlan>
+      <lldp-med label="LLDP-MED">
+       <device-type label="Device Type">Network Connectivity Device</device-type>
+       <capability label="Capability" type="Capabilities" available="yes"/>
+       <capability label="Capability" type="Policy" available="yes"/>
+       <capability label="Capability" type="Location" available="yes"/>
+       <capability label="Capability" type="MDI/PSE" available="yes"/>
+       <capability label="Capability" type="MDI/PD" available="yes"/>
+       <capability label="Capability" type="Inventory" available="yes"/>
+       <inventory label="Inventory">
+        <hardware label="Hardware Revision">None</hardware>
+        <software label="Software Revision">4.19.54-amd64-vyos</software>
+        <firmware label="Firmware Revision">6.00</firmware>
+        <serial label="Serial Number">VMware-42 1d cf 87 ab 7f da 7e-3</serial>
+        <manufacturer label="Manufacturer">VMware, Inc.</manufacturer>
+        <model label="Model">VMware Virtual Platform</model>
+        <asset label="Asset ID">No Asset Tag</asset>
+       </inventory>
+      </lldp-med>
+     </interface>
+    </lldp>
+    """
+
+    device = {
+        'interface' : neighbor.getAttribute('name'),
+        'chassis' : '',
+        'proto' : neighbor.getAttribute('via'),
+        'descr' : '',
+        'cap' : '',
+        'platform' : '',
+        'port' : ''
+    }
+
+    # first change to <chassis> node and then retrieve <name> and <descr>
+    chassis = neighbor.getElementsByTagName('chassis')
+    device['chassis'] = chassis[0].getElementsByTagName('name')[0].firstChild.data
+    # Cisco IOS comes with a ',' remove character ....
+    device['platform'] = chassis[0].getElementsByTagName('descr')[0].firstChild.data[:20].replace(',',' ')
+
+    # extract capabilities
+    for capability in chassis[0].getElementsByTagName('capability'):
+        # we are only interested in enabled capabilities ...
+        if capability.getAttribute('enabled') == "on":
+            if capability.getAttribute('type') == "Router":
+                device['cap'] += 'R'
+            elif capability.getAttribute('type') == "Bridge":
+                device['cap'] += 'B'
+            elif capability.getAttribute('type') == "Wlan":
+                device['cap'] += 'W'
+            elif capability.getAttribute('type') == "Station":
+                device['cap'] += 'S'
+            elif capability.getAttribute('type') == "Repeater":
+                device['cap'] += 'r'
+            elif capability.getAttribute('type') == "Telephone":
+                device['cap'] += 'T'
+            elif capability.getAttribute('type') == "Docsis":
+                device['cap'] += 'D'
+            elif capability.getAttribute('type') == "Other":
+                device['cap'] += 'O'
+
+    # first change to <port> node and then retrieve <descr>
+    port = neighbor.getElementsByTagName('port')
+    port = port[0].getElementsByTagName('descr')[0].firstChild.data
+    device['port'] = port
+
+
+    return device
+
+if __name__ == '__main__':
+    args = parser.parse_args()
+    tmp = { 'neighbors' : [] }
+
+    if args.all:
+       neighbors = minidom.parseString(_get_neighbors())
+       for neighbor in neighbors.getElementsByTagName('interface'):
+           tmp['neighbors'].append( extract_neighbor(neighbor) )
+
+    elif args.interface:
+        neighbors = minidom.parseString(_get_neighbors())
+        for neighbor in neighbors.getElementsByTagName('interface'):
+            # check if neighbor appeared on proper interface
+            if neighbor.getAttribute('name') == args.interface:
+                tmp['neighbors'].append( extract_neighbor(neighbor) )
+
+    else:
+        parser.print_help()
+        exit(1)
+
+    tmpl = jinja2.Template(lldp_out)
+    config_text = tmpl.render(tmp)
+    print(config_text)
+
+    exit(0)