diff options
Diffstat (limited to 'data/mibs/TUNNEL-MIB.txt')
| -rw-r--r-- | data/mibs/TUNNEL-MIB.txt | 738 |
1 files changed, 0 insertions, 738 deletions
diff --git a/data/mibs/TUNNEL-MIB.txt b/data/mibs/TUNNEL-MIB.txt deleted file mode 100644 index 5f9596b58..000000000 --- a/data/mibs/TUNNEL-MIB.txt +++ /dev/null @@ -1,738 +0,0 @@ -TUNNEL-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, transmission, - Integer32, IpAddress FROM SNMPv2-SMI -- [RFC2578] - - RowStatus, StorageType FROM SNMPv2-TC -- [RFC2579] - - MODULE-COMPLIANCE, - OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] - - InetAddressType, - InetAddress FROM INET-ADDRESS-MIB -- [RFC4001] - - IPv6FlowLabelOrAny FROM IPV6-FLOW-LABEL-MIB -- [RFC3595] - - ifIndex, - InterfaceIndexOrZero FROM IF-MIB -- [RFC2863] - - IANAtunnelType FROM IANAifType-MIB; -- [IFTYPE] - -tunnelMIB MODULE-IDENTITY - LAST-UPDATED "200505160000Z" -- May 16, 2005 - ORGANIZATION "IETF IP Version 6 (IPv6) Working Group" - CONTACT-INFO - " Dave Thaler - Microsoft Corporation - One Microsoft Way - Redmond, WA 98052-6399 - EMail: dthaler@microsoft.com" - DESCRIPTION - "The MIB module for management of IP Tunnels, - independent of the specific encapsulation scheme in - use. - - Copyright (C) The Internet Society (2005). This - version of this MIB module is part of RFC 4087; see - the RFC itself for full legal notices." - - REVISION "200505160000Z" -- May 16, 2005 - DESCRIPTION - "IPv4-specific objects were deprecated, including - tunnelIfLocalAddress, tunnelIfRemoteAddress, the - tunnelConfigTable, and the tunnelMIBBasicGroup. - - Added IP version-agnostic objects that should be used - instead, including tunnelIfAddressType, - tunnelIfLocalInetAddress, tunnelIfRemoteInetAddress, - the tunnelInetConfigTable, and the - tunnelIMIBInetGroup. - - The new tunnelIfLocalInetAddress and - tunnelIfRemoteInetAddress objects are read-write, - rather than read-only. - - Updated DESCRIPTION clauses of existing version- - agnostic objects (e.g., tunnelIfTOS) that contained - IPv4-specific text to cover IPv6 as well. - - Added tunnelIfFlowLabel for tunnels over IPv6. - - The encapsulation method was previously an INTEGER - type, and is now an IANA-maintained textual - convention. - - Published as RFC 4087." - REVISION "199908241200Z" -- August 24, 1999 - DESCRIPTION - "Initial version, published as RFC 2667." - ::= { transmission 131 } - -tunnelMIBObjects OBJECT IDENTIFIER ::= { tunnelMIB 1 } - -tunnel OBJECT IDENTIFIER ::= { tunnelMIBObjects 1 } - --- the IP Tunnel MIB-Group --- --- a collection of objects providing information about --- IP Tunnels - -tunnelIfTable OBJECT-TYPE - SYNTAX SEQUENCE OF TunnelIfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table containing information on - configured tunnels." - ::= { tunnel 1 } - -tunnelIfEntry OBJECT-TYPE - SYNTAX TunnelIfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry (conceptual row) containing the information - on a particular configured tunnel." - INDEX { ifIndex } - ::= { tunnelIfTable 1 } - -TunnelIfEntry ::= SEQUENCE { - tunnelIfLocalAddress IpAddress, -- deprecated - tunnelIfRemoteAddress IpAddress, -- deprecated - tunnelIfEncapsMethod IANAtunnelType, - tunnelIfHopLimit Integer32, - tunnelIfSecurity INTEGER, - tunnelIfTOS Integer32, - tunnelIfFlowLabel IPv6FlowLabelOrAny, - tunnelIfAddressType InetAddressType, - tunnelIfLocalInetAddress InetAddress, - tunnelIfRemoteInetAddress InetAddress, - tunnelIfEncapsLimit Integer32 -} - -tunnelIfLocalAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS deprecated - DESCRIPTION - "The address of the local endpoint of the tunnel - (i.e., the source address used in the outer IP - header), or 0.0.0.0 if unknown or if the tunnel is - over IPv6. - - Since this object does not support IPv6, it is - deprecated in favor of tunnelIfLocalInetAddress." - ::= { tunnelIfEntry 1 } - -tunnelIfRemoteAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS deprecated - DESCRIPTION - "The address of the remote endpoint of the tunnel - (i.e., the destination address used in the outer IP - header), or 0.0.0.0 if unknown, or an IPv6 address, or - - the tunnel is not a point-to-point link (e.g., if it - is a 6to4 tunnel). - - Since this object does not support IPv6, it is - deprecated in favor of tunnelIfRemoteInetAddress." - ::= { tunnelIfEntry 2 } - -tunnelIfEncapsMethod OBJECT-TYPE - SYNTAX IANAtunnelType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The encapsulation method used by the tunnel." - ::= { tunnelIfEntry 3 } - -tunnelIfHopLimit OBJECT-TYPE - SYNTAX Integer32 (0 | 1..255) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The IPv4 TTL or IPv6 Hop Limit to use in the outer IP - header. A value of 0 indicates that the value is - copied from the payload's header." - ::= { tunnelIfEntry 4 } - -tunnelIfSecurity OBJECT-TYPE - SYNTAX INTEGER { - none(1), -- no security - ipsec(2), -- IPsec security - other(3) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The method used by the tunnel to secure the outer IP - header. The value ipsec indicates that IPsec is used - between the tunnel endpoints for authentication or - encryption or both. More specific security-related - information may be available in a MIB module for the - security protocol in use." - ::= { tunnelIfEntry 5 } - -tunnelIfTOS OBJECT-TYPE - SYNTAX Integer32 (-2..63) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The method used to set the high 6 bits (the - - differentiated services codepoint) of the IPv4 TOS or - IPv6 Traffic Class in the outer IP header. A value of - -1 indicates that the bits are copied from the - payload's header. A value of -2 indicates that a - traffic conditioner is invoked and more information - may be available in a traffic conditioner MIB module. - A value between 0 and 63 inclusive indicates that the - bit field is set to the indicated value. - - Note: instead of the name tunnelIfTOS, a better name - would have been tunnelIfDSCPMethod, but the existing - name appeared in RFC 2667 and existing objects cannot - be renamed." - ::= { tunnelIfEntry 6 } - -tunnelIfFlowLabel OBJECT-TYPE - SYNTAX IPv6FlowLabelOrAny - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The method used to set the IPv6 Flow Label value. - This object need not be present in rows where - tunnelIfAddressType indicates the tunnel is not over - IPv6. A value of -1 indicates that a traffic - conditioner is invoked and more information may be - available in a traffic conditioner MIB. Any other - value indicates that the Flow Label field is set to - the indicated value." - ::= { tunnelIfEntry 7 } - -tunnelIfAddressType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The type of address in the corresponding - tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress - objects." - ::= { tunnelIfEntry 8 } - -tunnelIfLocalInetAddress OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The address of the local endpoint of the tunnel - (i.e., the source address used in the outer IP - header). If the address is unknown, the value is - - 0.0.0.0 for IPv4 or :: for IPv6. The type of this - object is given by tunnelIfAddressType." - ::= { tunnelIfEntry 9 } - -tunnelIfRemoteInetAddress OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The address of the remote endpoint of the tunnel - (i.e., the destination address used in the outer IP - header). If the address is unknown or the tunnel is - not a point-to-point link (e.g., if it is a 6to4 - tunnel), the value is 0.0.0.0 for tunnels over IPv4 or - :: for tunnels over IPv6. The type of this object is - given by tunnelIfAddressType." - ::= { tunnelIfEntry 10 } - -tunnelIfEncapsLimit OBJECT-TYPE - SYNTAX Integer32 (-1 | 0..255) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The maximum number of additional encapsulations - permitted for packets undergoing encapsulation at this - node. A value of -1 indicates that no limit is - present (except as a result of the packet size)." - REFERENCE "RFC 2473, section 4.1.1" - ::= { tunnelIfEntry 11 } - -tunnelConfigTable OBJECT-TYPE - SYNTAX SEQUENCE OF TunnelConfigEntry - MAX-ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "The (conceptual) table containing information on - configured tunnels. This table can be used to map a - set of tunnel endpoints to the associated ifIndex - value. It can also be used for row creation. Note - that every row in the tunnelIfTable with a fixed IPv4 - destination address should have a corresponding row in - the tunnelConfigTable, regardless of whether it was - created via SNMP. - - Since this table does not support IPv6, it is - deprecated in favor of tunnelInetConfigTable." - ::= { tunnel 2 } - -tunnelConfigEntry OBJECT-TYPE - SYNTAX TunnelConfigEntry - MAX-ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "An entry (conceptual row) containing the information - on a particular configured tunnel. - - Since this entry does not support IPv6, it is - deprecated in favor of tunnelInetConfigEntry." - INDEX { tunnelConfigLocalAddress, - tunnelConfigRemoteAddress, - tunnelConfigEncapsMethod, - tunnelConfigID } - ::= { tunnelConfigTable 1 } - -TunnelConfigEntry ::= SEQUENCE { - tunnelConfigLocalAddress IpAddress, - tunnelConfigRemoteAddress IpAddress, - tunnelConfigEncapsMethod IANAtunnelType, - tunnelConfigID Integer32, - tunnelConfigIfIndex InterfaceIndexOrZero, - tunnelConfigStatus RowStatus -} - -tunnelConfigLocalAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "The address of the local endpoint of the tunnel, or - 0.0.0.0 if the device is free to choose any of its - addresses at tunnel establishment time. - - Since this object does not support IPv6, it is - deprecated in favor of tunnelInetConfigLocalAddress." - ::= { tunnelConfigEntry 1 } - -tunnelConfigRemoteAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "The address of the remote endpoint of the tunnel. - - Since this object does not support IPv6, it is - deprecated in favor of tunnelInetConfigRemoteAddress." - ::= { tunnelConfigEntry 2 } - -tunnelConfigEncapsMethod OBJECT-TYPE - SYNTAX IANAtunnelType - MAX-ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "The encapsulation method used by the tunnel. - - Since this object does not support IPv6, it is - deprecated in favor of tunnelInetConfigEncapsMethod." - ::= { tunnelConfigEntry 3 } - -tunnelConfigID OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS not-accessible - STATUS deprecated - DESCRIPTION - "An identifier used to distinguish between multiple - tunnels of the same encapsulation method, with the - same endpoints. If the encapsulation protocol only - allows one tunnel per set of endpoint addresses (such - as for GRE or IP-in-IP), the value of this object is - 1. For encapsulation methods (such as L2F) which - allow multiple parallel tunnels, the manager is - responsible for choosing any ID which does not - conflict with an existing row, such as choosing a - random number. - - Since this object does not support IPv6, it is - deprecated in favor of tunnelInetConfigID." - ::= { tunnelConfigEntry 4 } - -tunnelConfigIfIndex OBJECT-TYPE - SYNTAX InterfaceIndexOrZero - MAX-ACCESS read-only - STATUS deprecated - DESCRIPTION - "If the value of tunnelConfigStatus for this row is - active, then this object contains the value of ifIndex - corresponding to the tunnel interface. A value of 0 - is not legal in the active state, and means that the - interface index has not yet been assigned. - - Since this object does not support IPv6, it is - deprecated in favor of tunnelInetConfigIfIndex." - ::= { tunnelConfigEntry 5 } - -tunnelConfigStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS deprecated - DESCRIPTION - "The status of this row, by which new entries may be - created, or old entries deleted from this table. The - agent need not support setting this object to - createAndWait or notInService since there are no other - writable objects in this table, and writable objects - in rows of corresponding tables such as the - tunnelIfTable may be modified while this row is - active. - - To create a row in this table for an encapsulation - method which does not support multiple parallel - tunnels with the same endpoints, the management - station should simply use a tunnelConfigID of 1, and - set tunnelConfigStatus to createAndGo. For - encapsulation methods such as L2F which allow multiple - parallel tunnels, the management station may select a - pseudo-random number to use as the tunnelConfigID and - set tunnelConfigStatus to createAndGo. In the event - that this ID is already in use and an - inconsistentValue is returned in response to the set - operation, the management station should simply select - a new pseudo-random number and retry the operation. - - Creating a row in this table will cause an interface - index to be assigned by the agent in an - implementation-dependent manner, and corresponding - rows will be instantiated in the ifTable and the - tunnelIfTable. The status of this row will become - active as soon as the agent assigns the interface - index, regardless of whether the interface is - operationally up. - - Deleting a row in this table will likewise delete the - corresponding row in the ifTable and in the - tunnelIfTable. - - Since this object does not support IPv6, it is - deprecated in favor of tunnelInetConfigStatus." - ::= { tunnelConfigEntry 6 } - -tunnelInetConfigTable OBJECT-TYPE - SYNTAX SEQUENCE OF TunnelInetConfigEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table containing information on - configured tunnels. This table can be used to map a - set of tunnel endpoints to the associated ifIndex - value. It can also be used for row creation. Note - that every row in the tunnelIfTable with a fixed - destination address should have a corresponding row in - the tunnelInetConfigTable, regardless of whether it - was created via SNMP." - ::= { tunnel 3 } - -tunnelInetConfigEntry OBJECT-TYPE - SYNTAX TunnelInetConfigEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry (conceptual row) containing the information - on a particular configured tunnel. Note that there is - a 128 subid maximum for object OIDs. Implementers - need to be aware that if the total number of octets in - tunnelInetConfigLocalAddress and - tunnelInetConfigRemoteAddress exceeds 110 then OIDs of - column instances in this table will have more than 128 - sub-identifiers and cannot be accessed using SNMPv1, - SNMPv2c, or SNMPv3. In practice this is not expected - to be a problem since IPv4 and IPv6 addresses will not - cause the limit to be reached, but if other types are - supported by an agent, care must be taken to ensure - that the sum of the lengths do not cause the limit to - be exceeded." - INDEX { tunnelInetConfigAddressType, - tunnelInetConfigLocalAddress, - tunnelInetConfigRemoteAddress, - tunnelInetConfigEncapsMethod, - tunnelInetConfigID } - ::= { tunnelInetConfigTable 1 } - -TunnelInetConfigEntry ::= SEQUENCE { - tunnelInetConfigAddressType InetAddressType, - tunnelInetConfigLocalAddress InetAddress, - tunnelInetConfigRemoteAddress InetAddress, - tunnelInetConfigEncapsMethod IANAtunnelType, - tunnelInetConfigID Integer32, - tunnelInetConfigIfIndex InterfaceIndexOrZero, - tunnelInetConfigStatus RowStatus, - tunnelInetConfigStorageType StorageType -} - -tunnelInetConfigAddressType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The address type over which the tunnel encapsulates - packets." - ::= { tunnelInetConfigEntry 1 } - -tunnelInetConfigLocalAddress OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The address of the local endpoint of the tunnel, or - 0.0.0.0 (for IPv4) or :: (for IPv6) if the device is - free to choose any of its addresses at tunnel - establishment time." - ::= { tunnelInetConfigEntry 2 } - -tunnelInetConfigRemoteAddress OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The address of the remote endpoint of the tunnel." - ::= { tunnelInetConfigEntry 3 } - -tunnelInetConfigEncapsMethod OBJECT-TYPE - SYNTAX IANAtunnelType - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The encapsulation method used by the tunnel." - ::= { tunnelInetConfigEntry 4 } - -tunnelInetConfigID OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An identifier used to distinguish between multiple - tunnels of the same encapsulation method, with the - same endpoints. If the encapsulation protocol only - allows one tunnel per set of endpoint addresses (such - as for GRE or IP-in-IP), the value of this object is - 1. For encapsulation methods (such as L2F) which - allow multiple parallel tunnels, the manager is - responsible for choosing any ID which does not - - conflict with an existing row, such as choosing a - random number." - ::= { tunnelInetConfigEntry 5 } - -tunnelInetConfigIfIndex OBJECT-TYPE - SYNTAX InterfaceIndexOrZero - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "If the value of tunnelInetConfigStatus for this row - is active, then this object contains the value of - ifIndex corresponding to the tunnel interface. A - value of 0 is not legal in the active state, and means - that the interface index has not yet been assigned." - ::= { tunnelInetConfigEntry 6 } - -tunnelInetConfigStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The status of this row, by which new entries may be - created, or old entries deleted from this table. The - agent need not support setting this object to - createAndWait or notInService since there are no other - writable objects in this table, and writable objects - in rows of corresponding tables such as the - tunnelIfTable may be modified while this row is - active. - - To create a row in this table for an encapsulation - method which does not support multiple parallel - tunnels with the same endpoints, the management - station should simply use a tunnelInetConfigID of 1, - and set tunnelInetConfigStatus to createAndGo. For - encapsulation methods such as L2F which allow multiple - parallel tunnels, the management station may select a - pseudo-random number to use as the tunnelInetConfigID - and set tunnelInetConfigStatus to createAndGo. In the - event that this ID is already in use and an - inconsistentValue is returned in response to the set - operation, the management station should simply select - a new pseudo-random number and retry the operation. - - Creating a row in this table will cause an interface - index to be assigned by the agent in an - implementation-dependent manner, and corresponding - rows will be instantiated in the ifTable and the - - tunnelIfTable. The status of this row will become - active as soon as the agent assigns the interface - index, regardless of whether the interface is - operationally up. - - Deleting a row in this table will likewise delete the - corresponding row in the ifTable and in the - tunnelIfTable." - ::= { tunnelInetConfigEntry 7 } - -tunnelInetConfigStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The storage type of this row. If the row is - permanent(4), no objects in the row need be writable." - ::= { tunnelInetConfigEntry 8 } - --- conformance information - -tunnelMIBConformance - OBJECT IDENTIFIER ::= { tunnelMIB 2 } -tunnelMIBCompliances - OBJECT IDENTIFIER ::= { tunnelMIBConformance 1 } -tunnelMIBGroups OBJECT IDENTIFIER ::= { tunnelMIBConformance 2 } - --- compliance statements - -tunnelMIBCompliance MODULE-COMPLIANCE - STATUS deprecated - DESCRIPTION - "The (deprecated) IPv4-only compliance statement for - the IP Tunnel MIB. - - This is deprecated in favor of - tunnelMIBInetFullCompliance and - tunnelMIBInetReadOnlyCompliance." - MODULE -- this module - MANDATORY-GROUPS { tunnelMIBBasicGroup } - - OBJECT tunnelIfHopLimit - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelIfTOS - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelConfigStatus - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - ::= { tunnelMIBCompliances 1 } - -tunnelMIBInetFullCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The full compliance statement for the IP Tunnel MIB." - MODULE -- this module - MANDATORY-GROUPS { tunnelMIBInetGroup } - - OBJECT tunnelIfAddressType - SYNTAX InetAddressType { ipv4(1), ipv6(2), - ipv4z(3), ipv6z(4) } - DESCRIPTION - "An implementation is only required to support IPv4 - and/or IPv6 addresses. An implementation only needs to - support the addresses it actually supports on the - device." - ::= { tunnelMIBCompliances 2 } - -tunnelMIBInetReadOnlyCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The read-only compliance statement for the IP Tunnel - MIB." - MODULE -- this module - MANDATORY-GROUPS { tunnelMIBInetGroup } - - OBJECT tunnelIfHopLimit - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelIfTOS - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelIfFlowLabel - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelIfAddressType - SYNTAX InetAddressType { ipv4(1), ipv6(2), - ipv4z(3), ipv6z(4) } - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. - - An implementation is only required to support IPv4 - and/or IPv6 addresses. An implementation only needs to - support the addresses it actually supports on the - device." - - OBJECT tunnelIfLocalInetAddress - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelIfRemoteInetAddress - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelIfEncapsLimit - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT tunnelInetConfigStatus - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required, and active is the only - status that needs to be supported." - - OBJECT tunnelInetConfigStorageType - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - ::= { tunnelMIBCompliances 3 } - --- units of conformance - -tunnelMIBBasicGroup OBJECT-GROUP - OBJECTS { tunnelIfLocalAddress, tunnelIfRemoteAddress, - tunnelIfEncapsMethod, tunnelIfHopLimit, tunnelIfTOS, - tunnelIfSecurity, tunnelConfigIfIndex, tunnelConfigStatus } - STATUS deprecated - DESCRIPTION - "A collection of objects to support basic management - - of IPv4 Tunnels. Since this group cannot support - IPv6, it is deprecated in favor of - tunnelMIBInetGroup." - ::= { tunnelMIBGroups 1 } - -tunnelMIBInetGroup OBJECT-GROUP - OBJECTS { tunnelIfAddressType, tunnelIfLocalInetAddress, - tunnelIfRemoteInetAddress, tunnelIfEncapsMethod, - tunnelIfEncapsLimit, - tunnelIfHopLimit, tunnelIfTOS, tunnelIfFlowLabel, - tunnelIfSecurity, tunnelInetConfigIfIndex, - tunnelInetConfigStatus, tunnelInetConfigStorageType } - STATUS current - DESCRIPTION - "A collection of objects to support basic management - of IPv4 and IPv6 Tunnels." - ::= { tunnelMIBGroups 2 } - -END |