diff options
Diffstat (limited to 'data/templates/wifi')
| -rw-r--r-- | data/templates/wifi/cfg80211.conf.tmpl | 3 | ||||
| -rw-r--r-- | data/templates/wifi/crda.tmpl | 3 | ||||
| -rw-r--r-- | data/templates/wifi/hostapd.conf.tmpl | 728 | ||||
| -rw-r--r-- | data/templates/wifi/wpa_supplicant.conf.tmpl | 9 |
4 files changed, 743 insertions, 0 deletions
diff --git a/data/templates/wifi/cfg80211.conf.tmpl b/data/templates/wifi/cfg80211.conf.tmpl new file mode 100644 index 000000000..b21bacc1e --- /dev/null +++ b/data/templates/wifi/cfg80211.conf.tmpl @@ -0,0 +1,3 @@ +{%- if regdom -%} +options cfg80211 ieee80211_regdom={{ regdom }} +{% endif %} diff --git a/data/templates/wifi/crda.tmpl b/data/templates/wifi/crda.tmpl new file mode 100644 index 000000000..750ad86ee --- /dev/null +++ b/data/templates/wifi/crda.tmpl @@ -0,0 +1,3 @@ +{%- if regdom -%} +REGDOMAIN={{ regdom }} +{% endif %} diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl new file mode 100644 index 000000000..031fb6c90 --- /dev/null +++ b/data/templates/wifi/hostapd.conf.tmpl @@ -0,0 +1,728 @@ +### Autogenerated by interfaces-wireless.py ### +{% if description %} +# Description: {{ description }} +# User-friendly description of device; up to 32 octets encoded in UTF-8 +device_name={{ description | truncate(32, True) }} +{% endif %} + +# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for +# management frames with the Host AP driver); wlan0 with many nl80211 drivers +# Note: This attribute can be overridden by the values supplied with the '-i' +# command line parameter. +interface={{ intf }} + +# Driver interface type (hostap/wired/none/nl80211/bsd); +# default: hostap). nl80211 is used with all Linux mac80211 drivers. +# Use driver=none if building hostapd as a standalone RADIUS server that does +# not control any wireless/wired driver. +driver=nl80211 + +# Levels (minimum value for logged events): +# 0 = verbose debugging +# 1 = debugging +# 2 = informational messages +# 3 = notification +# 4 = warning +logger_syslog=-1 +logger_syslog_level=0 +logger_stdout=-1 +logger_stdout_level=0 + +{%- if country_code %} + +# Country code (ISO/IEC 3166-1). Used to set regulatory domain. +# Set as needed to indicate country in which device is operating. +# This can limit available channels and transmit power. +country_code={{ country_code }} + +# Enable IEEE 802.11d. This advertises the country_code and the set of allowed +# channels and transmit power levels based on the regulatory limits. The +# country_code setting must be configured with the correct country for +# IEEE 802.11d functions. +ieee80211d=1 +{% endif %} + +{%- if ssid %} + +# SSID to be used in IEEE 802.11 management frames +ssid={{ ssid }} +{% endif %} + +{%- if channel %} + +# Channel number (IEEE 802.11) +# (default: 0, i.e., not set) +# Please note that some drivers do not use this value from hostapd and the +# channel will need to be configured separately with iwconfig. +# +# If CONFIG_ACS build option is enabled, the channel can be selected +# automatically at run time by setting channel=acs_survey or channel=0, both of +# which will enable the ACS survey based algorithm. +channel={{ channel }} +{% endif %} + +{%- if mode %} + +# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz), +# g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used +# with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this +# needs to be set to hw_mode=a. For IEEE 802.11ax (HE) on 6 GHz this needs +# to be set to hw_mode=a. When using ACS (see channel parameter), a +# special value "any" can be used to indicate that any support band can be used. +# This special case is currently supported only with drivers with which +# offloaded ACS is used. +{% if 'n' in mode -%} +hw_mode=g +ieee80211n=1 +{% elif 'ac' in mode -%} +hw_mode=a +ieee80211h=1 +ieee80211ac=1 +{% else -%} +hw_mode={{ mode }} +{% endif %} +{% endif %} + +# ieee80211w: Whether management frame protection (MFP) is enabled +# 0 = disabled (default) +# 1 = optional +# 2 = required +{% if 'disabled' in mgmt_frame_protection -%} +ieee80211w=0 +{% elif 'optional' in mgmt_frame_protection -%} +ieee80211w=1 +{% elif 'required' in mgmt_frame_protection -%} +ieee80211w=2 +{% endif %} + +# ht_capab: HT capabilities (list of flags) +# LDPC coding capability: [LDPC] = supported +# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary +# channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz +# with secondary channel above the primary channel +# (20 MHz only if neither is set) +# Note: There are limits on which channels can be used with HT40- and +# HT40+. Following table shows the channels that may be available for +# HT40- and HT40+ use per IEEE 802.11n Annex J: +# freq HT40- HT40+ +# 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan) +# 5 GHz 40,48,56,64 36,44,52,60 +# (depending on the location, not all of these channels may be available +# for use) +# Please note that 40 MHz channels may switch their primary and secondary +# channels if needed or creation of 40 MHz channel maybe rejected based +# on overlapping BSSes. These changes are done automatically when hostapd +# is setting up the 40 MHz channel. +# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC] +# (SMPS disabled if neither is set) +# HT-greenfield: [GF] (disabled if not set) +# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set) +# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set) +# Tx STBC: [TX-STBC] (disabled if not set) +# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial +# streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC +# disabled if none of these set +# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set) +# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not +# set) +# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set) +# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set) +# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set) +{% if cap_ht %} +ht_capab= +{%- endif -%} + +{%- if cap_ht_40mhz_incapable -%} +[40-INTOLERANT] +{%- endif -%} + +{%- if cap_ht_delayed_block_ack -%} +[DELAYED-BA] +{%- endif -%} + +{%- if cap_ht_dsss_cck_40 -%} +[DSSS_CCK-40] +{%- endif -%} + +{%- if cap_ht_greenfield -%} +[GF] +{%- endif -%} + +{%- if cap_ht_ldpc -%} +[LDPC] +{%- endif -%} + +{%- if cap_ht_lsig_protection -%} +[LSIG-TXOP-PROT] +{%- endif -%} + +{%- if cap_ht_max_amsdu -%} +[MAX-AMSDU-{{ cap_ht_max_amsdu }}] +{%- endif -%} + +{%- if cap_ht_smps -%} +[SMPS-{{ cap_ht_smps | upper }}] +{%- endif -%} + +{%- if cap_ht_chan_set_width -%} +{%- for csw in cap_ht_chan_set_width -%} +[{{ csw | upper }}] +{%- endfor -%} +{%- endif -%} + +{%- if cap_ht_short_gi -%} +{%- for gi in cap_ht_short_gi -%} +[SHORT-GI-{{ gi }}] +{%- endfor -%} +{%- endif -%} + +{%- if cap_ht_stbc_tx -%} +[TX-STBC] +{%- endif -%} +{%- if cap_ht_stbc_rx -%} +[RX-STBC{{ cap_ht_stbc_rx }}] +{%- endif %} + +# Required for full HT and VHT functionality +wme_enabled=1 + +{% if cap_ht_powersave -%} +# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] +# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver) +uapsd_advertisement_enabled=1 +{%- endif %} + +{% if cap_req_ht -%} +# Require stations to support HT PHY (reject association if they do not) +require_ht=1 +{% endif %} + +{%- if cap_vht_chan_set_width -%} +vht_oper_chwidth={{ cap_vht_chan_set_width }} +{%- endif %} + +# vht_capab: VHT capabilities (list of flags) +# +# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454] +# Indicates maximum MPDU length +# 0 = 3895 octets (default) +# 1 = 7991 octets +# 2 = 11454 octets +# 3 = reserved +# +# supported_chan_width: [VHT160] [VHT160-80PLUS80] +# Indicates supported Channel widths +# 0 = 160 MHz & 80+80 channel widths are not supported (default) +# 1 = 160 MHz channel width is supported +# 2 = 160 MHz & 80+80 channel widths are supported +# 3 = reserved +# +# Rx LDPC coding capability: [RXLDPC] +# Indicates support for receiving LDPC coded pkts +# 0 = Not supported (default) +# 1 = Supported +# +# Short GI for 80 MHz: [SHORT-GI-80] +# Indicates short GI support for reception of packets transmitted with TXVECTOR +# params format equal to VHT and CBW = 80Mhz +# 0 = Not supported (default) +# 1 = Supported +# +# Short GI for 160 MHz: [SHORT-GI-160] +# Indicates short GI support for reception of packets transmitted with TXVECTOR +# params format equal to VHT and CBW = 160Mhz +# 0 = Not supported (default) +# 1 = Supported +# +# Tx STBC: [TX-STBC-2BY1] +# Indicates support for the transmission of at least 2x1 STBC +# 0 = Not supported (default) +# 1 = Supported +# +# Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234] +# Indicates support for the reception of PPDUs using STBC +# 0 = Not supported (default) +# 1 = support of one spatial stream +# 2 = support of one and two spatial streams +# 3 = support of one, two and three spatial streams +# 4 = support of one, two, three and four spatial streams +# 5,6,7 = reserved +# +# SU Beamformer Capable: [SU-BEAMFORMER] +# Indicates support for operation as a single user beamformer +# 0 = Not supported (default) +# 1 = Supported +# +# SU Beamformee Capable: [SU-BEAMFORMEE] +# Indicates support for operation as a single user beamformee +# 0 = Not supported (default) +# 1 = Supported +# +# Compressed Steering Number of Beamformer Antennas Supported: +# [BF-ANTENNA-2] [BF-ANTENNA-3] [BF-ANTENNA-4] +# Beamformee's capability indicating the maximum number of beamformer +# antennas the beamformee can support when sending compressed beamforming +# feedback +# If SU beamformer capable, set to maximum value minus 1 +# else reserved (default) +# +# Number of Sounding Dimensions: +# [SOUNDING-DIMENSION-2] [SOUNDING-DIMENSION-3] [SOUNDING-DIMENSION-4] +# Beamformer's capability indicating the maximum value of the NUM_STS parameter +# in the TXVECTOR of a VHT NDP +# If SU beamformer capable, set to maximum value minus 1 +# else reserved (default) +# +# MU Beamformer Capable: [MU-BEAMFORMER] +# Indicates support for operation as an MU beamformer +# 0 = Not supported or sent by Non-AP STA (default) +# 1 = Supported +# +# VHT TXOP PS: [VHT-TXOP-PS] +# Indicates whether or not the AP supports VHT TXOP Power Save Mode +# or whether or not the STA is in VHT TXOP Power Save mode +# 0 = VHT AP doesn't support VHT TXOP PS mode (OR) VHT STA not in VHT TXOP PS +# mode +# 1 = VHT AP supports VHT TXOP PS mode (OR) VHT STA is in VHT TXOP power save +# mode +# +# +HTC-VHT Capable: [HTC-VHT] +# Indicates whether or not the STA supports receiving a VHT variant HT Control +# field. +# 0 = Not supported (default) +# 1 = supported +# +# Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7] +# Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv +# This field is an integer in the range of 0 to 7. +# The length defined by this field is equal to +# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets +# +# VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3] +# Indicates whether or not the STA supports link adaptation using VHT variant +# HT Control field +# If +HTC-VHTcapable is 1 +# 0 = (no feedback) if the STA does not provide VHT MFB (default) +# 1 = reserved +# 2 = (Unsolicited) if the STA provides only unsolicited VHT MFB +# 3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the +# STA provides unsolicited VHT MFB +# Reserved if +HTC-VHTcapable is 0 +# +# Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN] +# Indicates the possibility of Rx antenna pattern change +# 0 = Rx antenna pattern might change during the lifetime of an association +# 1 = Rx antenna pattern does not change during the lifetime of an association +# +# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN] +# Indicates the possibility of Tx antenna pattern change +# 0 = Tx antenna pattern might change during the lifetime of an association +# 1 = Tx antenna pattern does not change during the lifetime of an association +{% if cap_vht %} +vht_capab= +{%- endif -%} + +{%- if cap_vht_max_mpdu -%} +[MAX-MPDU-{{ cap_vht_max_mpdu }}] +{%- endif -%} + +{%- if cap_vht_max_mpdu_exp -%} +[MAX-A-MPDU-LEN-EXP{{ cap_vht_max_mpdu_exp }}] +{%- endif -%} + +{%- if cap_vht_chan_set_width -%} +{%- if '2' in cap_vht_chan_set_width -%} +[VHT160] +{%- elif '3' in cap_vht_chan_set_width -%} +[VHT160-80PLUS80] +{%- endif -%} +{%- endif -%} + +{%- if cap_vht_stbc_tx -%} +[TX-STBC-2BY1] +{%- endif -%} + +{%- if cap_vht_stbc_rx -%} +[RX-STBC-{{ cap_vht_stbc_rx }}] +{%- endif -%} + +{%- if cap_vht_link_adaptation -%} +{%- if 'unsolicited' in cap_vht_link_adaptation -%} +[VHT-LINK-ADAPT2] +{%- elif 'both' in cap_vht_link_adaptation -%} +[VHT-LINK-ADAPT3] +{%- endif -%} +{%- endif -%} + +{%- if cap_vht_short_gi -%} +{%- for gi in cap_vht_short_gi -%} +[SHORT-GI-{{ gi }}] +{%- endfor -%} +{%- endif -%} + +{%- if cap_vht_ldpc -%} +[RXLDPC] +{%- endif -%} + +{%- if cap_vht_tx_powersave -%} +[VHT-TXOP-PS] +{%- endif -%} + +{%- if cap_vht_vht_cf -%} +[HTC-VHT] +{%- endif -%} + +{%- if cap_vht_beamform -%} +{%- for beamform in cap_vht_beamform -%} +{%- if 'single-user-beamformer' in beamform -%} +[SU-BEAMFORMER] +{%- elif 'single-user-beamformee' in beamform -%} +[SU-BEAMFORMEE] +{%- elif 'multi-user-beamformer' in beamform -%} +[MU-BEAMFORMER] +{%- elif 'multi-user-beamformee' in beamform -%} +[MU-BEAMFORMEE] +{%- endif -%} +{%- endfor -%} +{%- endif -%} + +{%- if cap_vht_antenna_fixed -%} +[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN] +{%- endif -%} + +{%- if cap_vht_antenna_cnt -%} +{%- if cap_vht_antenna_cnt|int > 1 -%} +{%- if cap_vht_beamform -%} +{%- for beamform in cap_vht_beamform -%} +{%- if 'single-user-beamformer' in beamform -%} +{%- if cap_vht_antenna_cnt|int < 6 -%} +[BF-ANTENNA-{{ cap_vht_antenna_cnt|int -1 }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt|int -1}}] +{%- endif -%} +{%- else -%} +{%- if cap_vht_antenna_cnt|int < 5 -%} +[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}] +{%- endif -%} +{%- endif -%} +{%- endfor -%} +{%- else -%} +{%- if cap_vht_antenna_cnt|int < 5 -%} +[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}] +{%- endif -%} +{%- endif -%} +{%- endif -%} +{%- endif %} + +# ieee80211n: Whether IEEE 802.11n (HT) is enabled +# 0 = disabled (default) +# 1 = enabled +# Note: You will also need to enable WMM for full HT functionality. +# Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band. +{% if cap_req_vht -%} +ieee80211n=0 +# Require stations to support VHT PHY (reject association if they do not) +require_vht=1 +{% endif %} + +{% if cap_vht_center_freq_1 -%} +# center freq = 5 GHz + (5 * index) +# So index 42 gives center freq 5.210 GHz +# which is channel 42 in 5G band +vht_oper_centr_freq_seg0_idx={{ cap_vht_center_freq_1 }} +{% endif %} + +{% if cap_vht_center_freq_2 -%} +# center freq = 5 GHz + (5 * index) +# So index 159 gives center freq 5.795 GHz +# which is channel 159 in 5G band +vht_oper_centr_freq_seg1_idx={{ cap_vht_center_freq_2 }} +{% endif %} + +{% if disable_broadcast_ssid -%} +# Send empty SSID in beacons and ignore probe request frames that do not +# specify full SSID, i.e., require stations to know SSID. +# default: disabled (0) +# 1 = send empty (length=0) SSID in beacon and ignore probe request for +# broadcast SSID +# 2 = clear SSID (ASCII 0), but keep the original length (this may be required +# with some clients that do not support empty SSID) and ignore probe +# requests for broadcast SSID +ignore_broadcast_ssid=1 +{% endif %} + +# Station MAC address -based authentication +# Please note that this kind of access control requires a driver that uses +# hostapd to take care of management frame processing and as such, this can be +# used with driver=hostap or driver=nl80211, but not with driver=atheros. +# 0 = accept unless in deny list +# 1 = deny unless in accept list +# 2 = use external RADIUS server (accept/deny lists are searched first) +macaddr_acl=0 + +{% if max_stations -%} +# Maximum number of stations allowed in station table. New stations will be +# rejected after the station table is full. IEEE 802.11 has a limit of 2007 +# different association IDs, so this number should not be larger than that. +# (default: 2007) +max_num_sta={{ max_stations }} +{% endif %} + +{% if isolate_stations -%} +# Client isolation can be used to prevent low-level bridging of frames between +# associated stations in the BSS. By default, this bridging is allowed. +ap_isolate=1 +{% endif %} + +{% if reduce_transmit_power -%} +# Add Power Constraint element to Beacon and Probe Response frames +# This config option adds Power Constraint element when applicable and Country +# element is added. Power Constraint element is required by Transmit Power +# Control. This can be used only with ieee80211d=1. +# Valid values are 0..255. +local_pwr_constraint={{ reduce_transmit_power }} +{% endif %} + +{% if expunge_failing_stations -%} +# Disassociate stations based on excessive transmission failures or other +# indications of connection loss. This depends on the driver capabilities and +# may not be available with all drivers. +disassoc_low_ack=1 +{% endif %} + +{% if sec_wep -%} +# IEEE 802.11 specifies two authentication algorithms. hostapd can be +# configured to allow both of these or only one. Open system authentication +# should be used with IEEE 802.1X. +# Bit fields of allowed authentication algorithms: +# bit 0 = Open System Authentication +# bit 1 = Shared Key Authentication (requires WEP) +auth_algs=2 + +# WEP rekeying (disabled if key lengths are not set or are set to 0) +# Key lengths for default/broadcast and individual/unicast keys: +# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits) +# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits) +wep_key_len_broadcast=5 +wep_key_len_unicast=5 + +# Static WEP key configuration +# +# The key number to use when transmitting. +# It must be between 0 and 3, and the corresponding key must be set. +# default: not set +wep_default_key=0 + +# The WEP keys to use. +# A key may be a quoted string or unquoted hexadecimal digits. +# The key length should be 5, 13, or 16 characters, or 10, 26, or 32 +# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or +# 128-bit (152-bit) WEP is used. +# Only the default key must be supplied; the others are optional. +{% if sec_wep_key -%} +{% for key in sec_wep_key -%} +wep_key{{ loop.index -1 }}={{ key}} +{% endfor %} +{%- endif %} + +{% elif sec_wpa -%} +##### WPA/IEEE 802.11i configuration ########################################## + +# Enable WPA. Setting this variable configures the AP to require WPA (either +# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either +# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK. +# Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice. +# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys), +# RADIUS authentication server must be configured, and WPA-EAP must be included +# in wpa_key_mgmt. +# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0) +# and/or WPA2 (full IEEE 802.11i/RSN): +# bit0 = WPA +# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled) +{% if 'both' in sec_wpa_mode -%} +wpa=3 +{%- elif 'wpa2' in sec_wpa_mode -%} +wpa=2 +{%- elif 'wpa' in sec_wpa_mode -%} +wpa=1 +{%- endif %} + +{% if sec_wpa_cipher -%} +# Set of accepted cipher suites (encryption algorithms) for pairwise keys +# (unicast packets). This is a space separated list of algorithms: +# CCMP = AES in Counter mode with CBC-MAC (CCMP-128) +# TKIP = Temporal Key Integrity Protocol +# CCMP-256 = AES in Counter mode with CBC-MAC with 256-bit key +# GCMP = Galois/counter mode protocol (GCMP-128) +# GCMP-256 = Galois/counter mode protocol with 256-bit key +# Group cipher suite (encryption algorithm for broadcast and multicast frames) +# is automatically selected based on this configuration. If only CCMP is +# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise, +# TKIP will be used as the group cipher. The optional group_cipher parameter can +# be used to override this automatic selection. +{% if 'wpa2' in sec_wpa_mode -%} +# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value) +rsn_pairwise={{ sec_wpa_cipher | join(" ") }} +{% else -%} +# Pairwise cipher for WPA (v1) (default: TKIP) +wpa_pairwise={{ sec_wpa_cipher | join(" ") }} +{%- endif -%} +{% endif %} + +{% if sec_wpa_passphrase -%} +# IEEE 802.11 specifies two authentication algorithms. hostapd can be +# configured to allow both of these or only one. Open system authentication +# should be used with IEEE 802.1X. +# Bit fields of allowed authentication algorithms: +# bit 0 = Open System Authentication +# bit 1 = Shared Key Authentication (requires WEP) +auth_algs=1 + +# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit +# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase +# (8..63 characters) that will be converted to PSK. This conversion uses SSID +# so the PSK changes when ASCII passphrase is used and the SSID is changed. +wpa_passphrase={{ sec_wpa_passphrase }} + +# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The +# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be +# added to enable SHA256-based stronger algorithms. +# WPA-PSK = WPA-Personal / WPA2-Personal +# WPA-PSK-SHA256 = WPA2-Personal using SHA256 +wpa_key_mgmt=WPA-PSK + +{% elif sec_wpa_radius -%} +##### IEEE 802.1X-2004 related configuration ################################## +# Require IEEE 802.1X authorization +ieee8021x=1 + +# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The +# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be +# added to enable SHA256-based stronger algorithms. +# WPA-EAP = WPA-Enterprise / WPA2-Enterprise +# WPA-EAP-SHA256 = WPA2-Enterprise using SHA256 +wpa_key_mgmt=WPA-EAP + +{% if sec_wpa_radius_source -%} +# RADIUS client forced local IP address for the access point +# Normally the local IP address is determined automatically based on configured +# IP addresses, but this field can be used to force a specific address to be +# used, e.g., when the device has multiple IP addresses. +radius_client_addr={{ sec_wpa_radius_source }} + +# The own IP address of the access point (used as NAS-IP-Address) +own_ip_addr={{ sec_wpa_radius_source }} +{% else %} +# The own IP address of the access point (used as NAS-IP-Address) +own_ip_addr=127.0.0.1 +{% endif %} + +{% for radius in sec_wpa_radius -%} +{%- if not radius.disabled -%} +# RADIUS authentication server +auth_server_addr={{ radius.server }} +auth_server_port={{ radius.port }} +auth_server_shared_secret={{ radius.key }} +{% if radius.acc_port -%} +# RADIUS accounting server +acct_server_addr={{ radius.server }} +acct_server_port={{ radius.acc_port }} +acct_server_shared_secret={{ radius.key }} +{% endif %} +{% endif %} +{% endfor %} + +{% endif %} + +{% else %} +# Open system +auth_algs=1 +{% endif %} + +# TX queue parameters (EDCF / bursting) +# tx_queue_<queue name>_<param> +# queues: data0, data1, data2, data3 +# (data0 is the highest priority queue) +# parameters: +# aifs: AIFS (default 2) +# cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191, +# 16383, 32767) +# cwmax: cwMax (same values as cwMin, cwMax >= cwMin) +# burst: maximum length (in milliseconds with precision of up to 0.1 ms) for +# bursting +# +# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e): +# These parameters are used by the access point when transmitting frames +# to the clients. +# +# Low priority / AC_BK = background +tx_queue_data3_aifs=7 +tx_queue_data3_cwmin=15 +tx_queue_data3_cwmax=1023 +tx_queue_data3_burst=0 +# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0 +# +# Normal priority / AC_BE = best effort +tx_queue_data2_aifs=3 +tx_queue_data2_cwmin=15 +tx_queue_data2_cwmax=63 +tx_queue_data2_burst=0 +# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0 +# +# High priority / AC_VI = video +tx_queue_data1_aifs=1 +tx_queue_data1_cwmin=7 +tx_queue_data1_cwmax=15 +tx_queue_data1_burst=3.0 +# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0 +# +# Highest priority / AC_VO = voice +tx_queue_data0_aifs=1 +tx_queue_data0_cwmin=3 +tx_queue_data0_cwmax=7 +tx_queue_data0_burst=1.5 + +# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e): +# for 802.11a or 802.11g networks +# These parameters are sent to WMM clients when they associate. +# The parameters will be used by WMM clients for frames transmitted to the +# access point. +# +# note - txop_limit is in units of 32microseconds +# note - acm is admission control mandatory flag. 0 = admission control not +# required, 1 = mandatory +# note - Here cwMin and cmMax are in exponent form. The actual cw value used +# will be (2^n)-1 where n is the value given here. The allowed range for these +# wmm_ac_??_{cwmin,cwmax} is 0..15 with cwmax >= cwmin. +# +wmm_enabled=1 + +# Low priority / AC_BK = background +wmm_ac_bk_cwmin=4 +wmm_ac_bk_cwmax=10 +wmm_ac_bk_aifs=7 +wmm_ac_bk_txop_limit=0 +wmm_ac_bk_acm=0 +# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10 +# +# Normal priority / AC_BE = best effort +wmm_ac_be_aifs=3 +wmm_ac_be_cwmin=4 +wmm_ac_be_cwmax=10 +wmm_ac_be_txop_limit=0 +wmm_ac_be_acm=0 +# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7 +# +# High priority / AC_VI = video +wmm_ac_vi_aifs=2 +wmm_ac_vi_cwmin=3 +wmm_ac_vi_cwmax=4 +wmm_ac_vi_txop_limit=94 +wmm_ac_vi_acm=0 +# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188 +# +# Highest priority / AC_VO = voice +wmm_ac_vo_aifs=2 +wmm_ac_vo_cwmin=2 +wmm_ac_vo_cwmax=3 +wmm_ac_vo_txop_limit=47 +wmm_ac_vo_acm=0 + diff --git a/data/templates/wifi/wpa_supplicant.conf.tmpl b/data/templates/wifi/wpa_supplicant.conf.tmpl new file mode 100644 index 000000000..2784883f1 --- /dev/null +++ b/data/templates/wifi/wpa_supplicant.conf.tmpl @@ -0,0 +1,9 @@ +# WPA supplicant config +network={ + ssid="{{ ssid }}" +{%- if sec_wpa_passphrase %} + psk="{{ sec_wpa_passphrase }}" +{% else %} + key_mgmt=NONE +{% endif %} +} |