diff options
Diffstat (limited to 'data/templates')
-rw-r--r-- | data/templates/accel-ppp/ipoe.config.j2 | 16 | ||||
-rw-r--r-- | data/templates/frr/vrf.route-map.v6.frr.j2 | 10 | ||||
-rw-r--r-- | data/templates/pppoe/peer.j2 | 4 | ||||
-rw-r--r-- | data/templates/sflow/hsflowd.conf.j2 | 31 | ||||
-rw-r--r-- | data/templates/sflow/override.conf.j2 | 16 |
5 files changed, 69 insertions, 8 deletions
diff --git a/data/templates/accel-ppp/ipoe.config.j2 b/data/templates/accel-ppp/ipoe.config.j2 index 27621bc9b..ac83c3dbd 100644 --- a/data/templates/accel-ppp/ipoe.config.j2 +++ b/data/templates/accel-ppp/ipoe.config.j2 @@ -44,18 +44,18 @@ vlan-mon={{ iface }},{{ iface_config.vlan | join(',') }} {% endif %} {% if authentication.mode is vyos_defined('noauth') %} noauth=1 -{% if client_ip_pool.name is vyos_defined %} -{% for pool, pool_options in client_ip_pool.name.items() %} -{% if pool_options.subnet is vyos_defined and pool_options.gateway_address is vyos_defined %} -ip-pool={{ pool }} -gw-ip-address={{ pool_options.gateway_address }}/{{ pool_options.subnet.split('/')[1] }} -{% endif %} -{% endfor %} -{% endif %} {% elif authentication.mode is vyos_defined('local') %} username=ifname password=csid {% endif %} +{% if client_ip_pool.name is vyos_defined %} +{% for pool, pool_options in client_ip_pool.name.items() %} +{% if pool_options.subnet is vyos_defined and pool_options.gateway_address is vyos_defined %} +ip-pool={{ pool }} +gw-ip-address={{ pool_options.gateway_address }}/{{ pool_options.subnet.split('/')[1] }} +{% endif %} +{% endfor %} +{% endif %} proxy-arp=1 {% if client_ip_pool.name is vyos_defined %} diff --git a/data/templates/frr/vrf.route-map.v6.frr.j2 b/data/templates/frr/vrf.route-map.v6.frr.j2 new file mode 100644 index 000000000..7dc59a046 --- /dev/null +++ b/data/templates/frr/vrf.route-map.v6.frr.j2 @@ -0,0 +1,10 @@ +! +{% if vrf is vyos_defined and route_map is vyos_defined %} +vrf {{ vrf }} + ipv6 protocol {{ protocol }} route-map {{ route_map }} + exit-vrf +! +{% elif route_map is vyos_defined %} +ipv6 protocol {{ protocol }} route-map {{ route_map }} +{% endif %} +! diff --git a/data/templates/pppoe/peer.j2 b/data/templates/pppoe/peer.j2 index 5e650fa3b..f30cefe63 100644 --- a/data/templates/pppoe/peer.j2 +++ b/data/templates/pppoe/peer.j2 @@ -65,6 +65,10 @@ mru {{ mtu }} noipv6 {% endif %} +{% if holdoff is vyos_defined %} +holdoff {{ holdoff }} +{% endif %} + {% if connect_on_demand is vyos_defined %} demand # See T2249. PPP default route options should only be set when in on-demand diff --git a/data/templates/sflow/hsflowd.conf.j2 b/data/templates/sflow/hsflowd.conf.j2 new file mode 100644 index 000000000..94f5939be --- /dev/null +++ b/data/templates/sflow/hsflowd.conf.j2 @@ -0,0 +1,31 @@ +# Genereated by /usr/libexec/vyos/conf_mode/system_sflow.py +# Parameters http://sflow.net/host-sflow-linux-config.php + +sflow { +{% if polling is vyos_defined %} + polling={{ polling }} +{% endif %} +{% if sampling_rate is vyos_defined %} + sampling={{ sampling_rate }} + sampling.bps_ratio=0 +{% endif %} +{% if agent_address is vyos_defined %} + agentIP={{ agent_address }} +{% endif %} +{% if agent_interface is vyos_defined %} + agent={{ agent_interface }} +{% endif %} +{% if server is vyos_defined %} +{% for server, server_config in server.items() %} + collector { ip = {{ server }} udpport = {{ server_config.port }} } +{% endfor %} +{% endif %} +{% if interface is vyos_defined %} +{% for iface in interface %} + pcap { dev={{ iface }} } +{% endfor %} +{% endif %} +{% if drop_monitor_limit is vyos_defined %} + dropmon { limit={{ drop_monitor_limit }} start=on sw=on hw=off } +{% endif %} +} diff --git a/data/templates/sflow/override.conf.j2 b/data/templates/sflow/override.conf.j2 new file mode 100644 index 000000000..f2a982528 --- /dev/null +++ b/data/templates/sflow/override.conf.j2 @@ -0,0 +1,16 @@ +[Unit] +After= +After=vyos-router.service +ConditionPathExists= +ConditionPathExists=/run/sflow/hsflowd.conf + +[Service] +EnvironmentFile= +ExecStart= +ExecStart=/usr/sbin/hsflowd -m %m -d -f /run/sflow/hsflowd.conf +WorkingDirectory= +WorkingDirectory=/run/sflow +PIDFile= +PIDFile=/run/sflow/hsflowd.pid +Restart=always +RestartSec=10 |