13 files changed, 904 insertions, 1148 deletions
diff --git a/data/configd-include.json b/data/configd-include.json
index a762a6d4c..92d3863ce 100644
--- a/data/configd-include.json
+++ b/data/configd-include.json
@@ -53,6 +53,7 @@
 "protocols_rip.py",
 "protocols_ripng.py",
 "protocols_rpki.py",
+"protocols_segment_routing.py",
 "protocols_static.py",
 "protocols_static_multicast.py",
 "qos.py",
diff --git a/data/templates/container/containers.conf.j2 b/data/templates/container/containers.conf.j2
index c635ca213..c8b54dfbb 100644
--- a/data/templates/container/containers.conf.j2
+++ b/data/templates/container/containers.conf.j2
@@ -1,709 +1,709 @@
-### Autogenerated by container.py ###
-
-# The containers configuration file specifies all of the available configuration
-# command-line options/flags for container engine tools like Podman & Buildah,
-# but in a TOML format that can be easily modified and versioned.
-
-# Please refer to containers.conf(5) for details of all configuration options.
-# Not all container engines implement all of the options.
-# All of the options have hard coded defaults and these options will override
-# the built in defaults. Users can then override these options via the command
-# line. Container engines will read containers.conf files in up to three
-# locations in the following order:
-#  1. /usr/share/containers/containers.conf
-#  2. /etc/containers/containers.conf
-#  3. $HOME/.config/containers/containers.conf (Rootless containers ONLY)
-#  Items specified in the latter containers.conf, if they exist, override the
-# previous containers.conf settings, or the default settings.
-
-[containers]
-
-# List of annotation. Specified as
-# "key = value"
-# If it is empty or commented out, no annotations will be added
-#
-#annotations = []
-
-# Used to change the name of the default AppArmor profile of container engine.
-#
-#apparmor_profile = "container-default"
-
-# The hosts entries from the base hosts file are added to the containers hosts
-# file. This must be either an absolute path or as special values "image" which
-# uses the hosts file from the container image or "none" which means
-# no base hosts file is used. The default is "" which will use /etc/hosts.
-#
-#base_hosts_file = ""
-
-# Default way to to create a cgroup namespace for the container
-# Options are:
-# `private` Create private Cgroup Namespace for the container.
-# `host`    Share host Cgroup Namespace with the container.
-#
-#cgroupns = "private"
-
-# Control container cgroup configuration
-# Determines  whether  the  container will create CGroups.
-# Options are:
-# `enabled`   Enable cgroup support within container
-# `disabled`  Disable cgroup support, will inherit cgroups from parent
-# `no-conmon` Do not create a cgroup dedicated to conmon.
-#
-#cgroups = "enabled"
-
-# List of default capabilities for containers. If it is empty or commented out,
-# the default capabilities defined in the container engine will be added.
-#
-default_capabilities = [
-  "CHOWN",
-  "DAC_OVERRIDE",
-  "FOWNER",
-  "FSETID",
-  "KILL",
-  "NET_BIND_SERVICE",
-  "SETFCAP",
-  "SETGID",
-  "SETPCAP",
-  "SETUID",
-  "SYS_CHROOT"
-]
-
-# A list of sysctls to be set in containers by default,
-# specified as "name=value",
-# for example:"net.ipv4.ping_group_range=0 0".
-#
-default_sysctls = [
-  "net.ipv4.ping_group_range=0 0",
-]
-
-# A list of ulimits to be set in containers by default, specified as
-# "<ulimit name>=<soft limit>:<hard limit>", for example:
-# "nofile=1024:2048"
-# See setrlimit(2) for a list of resource names.
-# Any limit not specified here will be inherited from the process launching the
-# container engine.
-# Ulimits has limits for non privileged container engines.
-#
-#default_ulimits = [
-#  "nofile=1280:2560",
-#]
-
-# List of devices. Specified as
-# "<device-on-host>:<device-on-container>:<permissions>", for example:
-# "/dev/sdc:/dev/xvdc:rwm".
-# If it is empty or commented out, only the default devices will be used
-#
-#devices = []
-
-# List of default DNS options to be added to /etc/resolv.conf inside of the container.
-#
-#dns_options = []
-
-# List of default DNS search domains to be added to /etc/resolv.conf inside of the container.
-#
-#dns_searches = []
-
-# Set default DNS servers.
-# This option can be used to override the DNS configuration passed to the
-# container. The special value "none" can be specified to disable creation of
-# /etc/resolv.conf in the container.
-# The /etc/resolv.conf file in the image will be used without changes.
-#
-#dns_servers = []
-
-# Environment variable list for the conmon process; used for passing necessary
-# environment variables to conmon or the runtime.
-#
-#env = [
-#  "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
-#  "TERM=xterm",
-#]
-
-# Pass all host environment variables into the container.
-#
-#env_host = false
-
-# Set the ip for the host.containers.internal entry in the containers /etc/hosts
-# file. This can be set to "none" to disable adding this entry. By default it
-# will automatically choose the host ip.
-#
-# NOTE: When using podman machine this entry will never be added to the containers
-# hosts file instead the gvproxy dns resolver will resolve this hostname. Therefore
-# it is not possible to disable the entry in this case.
-#
-#host_containers_internal_ip = ""
-
-# Default proxy environment variables passed into the container.
-# The environment variables passed in include:
-# http_proxy, https_proxy, ftp_proxy, no_proxy, and the upper case versions of
-# these. This option is needed when host system uses a proxy but container
-# should not use proxy. Proxy environment variables specified for the container
-# in any other way will override the values passed from the host.
-#
-#http_proxy = true
-
-# Run an init inside the container that forwards signals and reaps processes.
-#
-#init = false
-
-# Container init binary, if init=true, this is the init binary to be used for containers.
-#
-#init_path = "/usr/libexec/podman/catatonit"
-
-# Default way to to create an IPC namespace (POSIX SysV IPC) for the container
-# Options are:
-#  "host"     Share host IPC Namespace with the container.
-#  "none"     Create shareable IPC Namespace for the container without a private /dev/shm.
-#  "private"  Create private IPC Namespace for the container, other containers are not allowed to share it.
-#  "shareable" Create shareable IPC Namespace for the container.
-#
-#ipcns = "shareable"
-
-# keyring tells the container engine whether to create
-# a kernel keyring for use within the container.
-#
-#keyring = true
-
-# label tells the container engine whether to use container separation using
-# MAC(SELinux) labeling or not.
-# The label flag is ignored on label disabled systems.
-#
-#label = true
-
-# Logging driver for the container. Available options: k8s-file and journald.
-#
-#log_driver = "k8s-file"
-
-# Maximum size allowed for the container log file. Negative numbers indicate
-# that no size limit is imposed. If positive, it must be >= 8192 to match or
-# exceed conmon's read buffer. The file is truncated and re-opened so the
-# limit is never exceeded.
-#
-#log_size_max = -1
-
-# Specifies default format tag for container log messages.
-# This is useful for creating a specific tag for container log messages.
-# Containers logs default to truncated container ID as a tag.
-#
-#log_tag = ""
-
-# Default way to to create a Network namespace for the container
-# Options are:
-# `private` Create private Network Namespace for the container.
-# `host`    Share host Network Namespace with the container.
-# `none`    Containers do not use the network
-#
-#netns = "private"
-
-# Create /etc/hosts for the container.  By default, container engine manage
-# /etc/hosts, automatically adding  the container's  own  IP  address.
-#
-#no_hosts = false
-
-# Default way to to create a PID namespace for the container
-# Options are:
-# `private` Create private PID Namespace for the container.
-# `host`    Share host PID Namespace with the container.
-#
-#pidns = "private"
-
-# Maximum number of processes allowed in a container.
-#
-#pids_limit = 2048
-
-# Copy the content from the underlying image into the newly created volume
-# when the container is created instead of when it is started. If false,
-# the container engine will not copy the content until the container is started.
-# Setting it to true may have negative performance implications.
-#
-#prepare_volume_on_create = false
-
-# Path to the seccomp.json profile which is used as the default seccomp profile
-# for the runtime.
-#
-#seccomp_profile = "/usr/share/containers/seccomp.json"
-
-# Size of /dev/shm. Specified as <number><unit>.
-# Unit is optional, values:
-# b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
-# If the unit is omitted, the system uses bytes.
-#
-#shm_size = "65536k"
-
-# Set timezone in container. Takes IANA timezones as well as "local",
-# which sets the timezone in the container to match the host machine.
-#
-#tz = ""
-
-# Set umask inside the container
-#
-#umask = "0022"
-
-# Default way to to create a User namespace for the container
-# Options are:
-# `auto`        Create unique User Namespace for the container.
-# `host`    Share host User Namespace with the container.
-#
-#userns = "host"
-
-# Number of UIDs to allocate for the automatic container creation.
-# UIDs are allocated from the "container" UIDs listed in
-# /etc/subuid & /etc/subgid
-#
-#userns_size = 65536
-
-# Default way to to create a UTS namespace for the container
-# Options are:
-# `private`        Create private UTS Namespace for the container.
-# `host`    Share host UTS Namespace with the container.
-#
-#utsns = "private"
-
-# List of volumes. Specified as
-# "<directory-on-host>:<directory-in-container>:<options>", for example:
-# "/db:/var/lib/db:ro".
-# If it is empty or commented out, no volumes will be added
-#
-#volumes = []
-
-[secrets]
-#driver = "file"
-
-[secrets.opts]
-#root = "/example/directory"
-
-[network]
-
-# Network backend determines what network driver will be used to set up and tear down container networks.
-# Valid values are "cni" and "netavark".
-# The default value is empty which means that it will automatically choose CNI or netavark. If there are
-# already containers/images or CNI networks preset it will choose CNI.
-#
-# Before changing this value all containers must be stopped otherwise it is likely that
-# iptables rules and network interfaces might leak on the host. A reboot will fix this.
-#
-network_backend = "netavark"
-
-# Path to directory where CNI plugin binaries are located.
-#
-#cni_plugin_dirs = [
-#  "/usr/local/libexec/cni",
-#  "/usr/libexec/cni",
-#  "/usr/local/lib/cni",
-#  "/usr/lib/cni",
-#  "/opt/cni/bin",
-#]
-
-# The network name of the default network to attach pods to.
-#
-#default_network = "podman"
-
-# The default subnet for the default network given in default_network.
-# If a network with that name does not exist, a new network using that name and
-# this subnet will be created.
-# Must be a valid IPv4 CIDR prefix.
-#
-#default_subnet = "10.88.0.0/16"
-
-# DefaultSubnetPools is a list of subnets and size which are used to
-# allocate subnets automatically for podman network create.
-# It will iterate through the list and will pick the first free subnet
-# with the given size. This is only used for ipv4 subnets, ipv6 subnets
-# are always assigned randomly.
-#
-#default_subnet_pools = [
-#  {"base" = "10.89.0.0/16", "size" = 24},
-#  {"base" = "10.90.0.0/15", "size" = 24},
-#  {"base" = "10.92.0.0/14", "size" = 24},
-#  {"base" = "10.96.0.0/11", "size" = 24},
-#  {"base" = "10.128.0.0/9", "size" = 24},
-#]
-
-# Path to the directory where network configuration files are located.
-# For the CNI backend the default is "/etc/cni/net.d" as root
-# and "$HOME/.config/cni/net.d" as rootless.
-# For the netavark backend "/etc/containers/networks" is used as root
-# and "$graphroot/networks" as rootless.
-#
-#network_config_dir = "/etc/cni/net.d/"
-
-# Port to use for dns forwarding daemon with netavark in rootful bridge
-# mode and dns enabled.
-# Using an alternate port might be useful if other dns services should
-# run on the machine.
-#
-#dns_bind_port = 53
-
-[engine]
-# Index to the active service
-#
-#active_service = production
-
-# The compression format to use when pushing an image.
-# Valid options are: `gzip`, `zstd` and `zstd:chunked`.
-#
-#compression_format = "gzip"
-
-
-# Cgroup management implementation used for the runtime.
-# Valid options "systemd" or "cgroupfs"
-#
-#cgroup_manager = "systemd"
-
-# Environment variables to pass into conmon
-#
-#conmon_env_vars = [
-#  "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-#]
-
-# Paths to look for the conmon container manager binary
-#
-#conmon_path = [
-#  "/usr/libexec/podman/conmon",
-#  "/usr/local/libexec/podman/conmon",
-#  "/usr/local/lib/podman/conmon",
-#  "/usr/bin/conmon",
-#  "/usr/sbin/conmon",
-#  "/usr/local/bin/conmon",
-#  "/usr/local/sbin/conmon"
-#]
-
-# Enforces using docker.io for completing short names in Podman's compatibility
-# REST API. Note that this will ignore unqualified-search-registries and
-# short-name aliases defined in containers-registries.conf(5).
-#compat_api_enforce_docker_hub = true
-
-# Specify the keys sequence used to detach a container.
-# Format is a single character [a-Z] or a comma separated sequence of
-# `ctrl-<value>`, where `<value>` is one of:
-# `a-z`, `@`, `^`, `[`, `\`, `]`, `^` or `_`
-#
-#detach_keys = "ctrl-p,ctrl-q"
-
-# Determines whether engine will reserve ports on the host when they are
-# forwarded to containers. When enabled, when ports are forwarded to containers,
-# ports are held open by as long as the container is running, ensuring that
-# they cannot be reused by other programs on the host. However, this can cause
-# significant memory usage if a container has many ports forwarded to it.
-# Disabling this can save memory.
-#
-#enable_port_reservation = true
-
-# Environment variables to be used when running the container engine (e.g., Podman, Buildah).
-# For example "http_proxy=internal.proxy.company.com".
-# Note these environment variables will not be used within the container.
-# Set the env section under [containers] table, if you want to set environment variables for the container.
-#
-#env = []
-
-# Define where event logs will be stored, when events_logger is "file".
-#events_logfile_path=""
-
-# Sets the maximum size for events_logfile_path.
-# The size can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
-# The format for the size is `<number><unit>`, e.g., `1b` or `3g`.
-# If no unit is included then the size will be read in bytes.
-# When the limit is exceeded, the logfile will be rotated and the old one will be deleted.
-# If the maximum size is set to 0, then no limit will be applied,
-# and the logfile will not be rotated.
-#events_logfile_max_size = "1m"
-
-# Selects which logging mechanism to use for container engine events.
-# Valid values are `journald`, `file` and `none`.
-#
-#events_logger = "journald"
-
-# A is a list of directories which are used to search for helper binaries.
-#
-#helper_binaries_dir = [
-#  "/usr/local/libexec/podman",
-#  "/usr/local/lib/podman",
-#  "/usr/libexec/podman",
-#  "/usr/lib/podman",
-#]
-
-# Path to OCI hooks directories for automatically executed hooks.
-#
-#hooks_dir = [
-#  "/usr/share/containers/oci/hooks.d",
-#]
-
-# Manifest Type (oci, v2s2, or v2s1) to use when pulling, pushing, building
-# container images. By default image pulled and pushed match the format of the
-# source image. Building/committing defaults to OCI.
-#
-#image_default_format = ""
-
-# Default transport method for pulling and pushing for images
-#
-#image_default_transport = "docker://"
-
-# Maximum number of image layers to be copied (pulled/pushed) simultaneously.
-# Not setting this field, or setting it to zero, will fall back to containers/image defaults.
-#
-#image_parallel_copies = 0
-
-# Tells container engines how to handle the builtin image volumes.
-#   * bind: An anonymous named volume will be created and mounted
-#     into the container.
-#   * tmpfs: The volume is mounted onto the container as a tmpfs,
-#     which allows users to create content that disappears when
-#     the container is stopped.
-#   * ignore: All volumes are just ignored and no action is taken.
-#
-#image_volume_mode = ""
-
-# Default command to run the infra container
-#
-#infra_command = "/pause"
-
-# Infra (pause) container image name for pod infra containers.  When running a
-# pod, we start a `pause` process in a container to hold open the namespaces
-# associated with the  pod.  This container does nothing other then sleep,
-# reserving the pods resources for the lifetime of the pod. By default container
-# engines run a builtin container using the pause executable. If you want override
-# specify an image to pull.
-#
-#infra_image = ""
-
-# Specify the locking mechanism to use; valid values are "shm" and "file".
-# Change the default only if you are sure of what you are doing, in general
-# "file" is useful only on platforms where cgo is not available for using the
-# faster "shm" lock type. You may need to run "podman system renumber" after
-# you change the lock type.
-#
-#lock_type** = "shm"
-
-# MultiImageArchive - if true, the container engine allows for storing archives
-# (e.g., of the docker-archive transport) with multiple images.  By default,
-# Podman creates single-image archives.
-#
-#multi_image_archive = "false"
-
-# Default engine namespace
-# If engine is joined to a namespace, it will see only containers and pods
-# that were created in the same namespace, and will create new containers and
-# pods in that namespace.
-# The default namespace is "", which corresponds to no namespace. When no
-# namespace is set, all containers and pods are visible.
-#
-#namespace = ""
-
-# Path to the slirp4netns binary
-#
-#network_cmd_path = ""
-
-# Default options to pass to the slirp4netns binary.
-# Valid options values are:
-#
-# - allow_host_loopback=true|false: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`).
-#   Default is false.
-# - mtu=MTU: Specify the MTU to use for this network. (Default is `65520`).
-# - cidr=CIDR: Specify ip range to use for this network. (Default is `10.0.2.0/24`).
-# - enable_ipv6=true|false: Enable IPv6. Default is true. (Required for `outbound_addr6`).
-# - outbound_addr=INTERFACE: Specify the outbound interface slirp should bind to (ipv4 traffic only).
-# - outbound_addr=IPv4: Specify the outbound ipv4 address slirp should bind to.
-# - outbound_addr6=INTERFACE: Specify the outbound interface slirp should bind to (ipv6 traffic only).
-# - outbound_addr6=IPv6: Specify the outbound ipv6 address slirp should bind to.
-# - port_handler=rootlesskit: Use rootlesskit for port forwarding. Default.
-#   Note: Rootlesskit changes the source IP address of incoming packets to a IP address in the container
-#   network namespace, usually `10.0.2.100`. If your application requires the real source IP address,
-#   e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for
-#   rootless containers when connected to user-defined networks.
-# - port_handler=slirp4netns: Use the slirp4netns port forwarding, it is slower than rootlesskit but
-#   preserves the correct source IP address. This port handler cannot be used for user-defined networks.
-#
-#network_cmd_options = []
-
-# Whether to use chroot instead of pivot_root in the runtime
-#
-#no_pivot_root = false
-
-# Number of locks available for containers and pods.
-# If this is changed, a lock renumber must be performed (e.g. with the
-# 'podman system renumber' command).
-#
-#num_locks = 2048
-
-# Set the exit policy of the pod when the last container exits.
-#pod_exit_policy = "continue"
-
-# Whether to pull new image before running a container
-#
-#pull_policy = "missing"
-
-# Indicates whether the application should be running in remote mode. This flag modifies the
-# --remote option on container engines. Setting the flag to true will default
-# `podman --remote=true` for access to the remote Podman service.
-#
-#remote = false
-
-# Default OCI runtime
-#
-#runtime = "crun"
-
-# List of the OCI runtimes that support --format=json. When json is supported
-# engine will use it for reporting nicer errors.
-#
-#runtime_supports_json = ["crun", "runc", "kata", "runsc", "krun"]
-
-# List of the OCI runtimes that supports running containers with KVM Separation.
-#
-#runtime_supports_kvm = ["kata", "krun"]
-
-# List of the OCI runtimes that supports running containers without cgroups.
-#
-#runtime_supports_nocgroups = ["crun", "krun"]
-
-# Default location for storing temporary container image content. Can be overridden with the TMPDIR environment
-# variable. If you specify "storage", then the location of the
-# container/storage tmp directory will be used.
-# image_copy_tmp_dir="/var/tmp"
-
-# Number of seconds to wait without a connection
-# before the `podman system service` times out and exits
-#
-#service_timeout = 5
-
-# Directory for persistent engine files (database, etc)
-# By default, this will be configured relative to where the containers/storage
-# stores containers
-# Uncomment to change location from this default
-#
-#static_dir = "/var/lib/containers/storage/libpod"
-
-# Number of seconds to wait for container to exit before sending kill signal.
-#
-#stop_timeout = 10
-
-# Number of seconds to wait before exit command in API process is given to.
-# This mimics Docker's exec cleanup behaviour, where the default is 5 minutes (value is in seconds).
-#
-#exit_command_delay = 300
-
-# map of service destinations
-#
-#[service_destinations]
-#  [service_destinations.production]
-#     URI to access the Podman service
-#     Examples:
-#       rootless "unix://run/user/$UID/podman/podman.sock" (Default)
-#       rootful "unix://run/podman/podman.sock (Default)
-#       remote rootless ssh://engineering.lab.company.com/run/user/1000/podman/podman.sock
-#       remote rootful ssh://root@10.10.1.136:22/run/podman/podman.sock
-#
-#    uri = "ssh://user@production.example.com/run/user/1001/podman/podman.sock"
-#    Path to file containing ssh identity key
-#    identity = "~/.ssh/id_rsa"
-
-# Directory for temporary files. Must be tmpfs (wiped after reboot)
-#
-#tmp_dir = "/run/libpod"
-
-# Directory for libpod named volumes.
-# By default, this will be configured relative to where containers/storage
-# stores containers.
-# Uncomment to change location from this default.
-#
-#volume_path = "/var/lib/containers/storage/volumes"
-
-# Default timeout (in seconds) for volume plugin operations.
-# Plugins are external programs accessed via a REST API; this sets a timeout
-# for requests to that API.
-# A value of 0 is treated as no timeout.
-#volume_plugin_timeout = 5
-
-# Paths to look for a valid OCI runtime (crun, runc, kata, runsc, krun, etc)
-[engine.runtimes]
-#crun = [
-#  "/usr/bin/crun",
-#  "/usr/sbin/crun",
-#  "/usr/local/bin/crun",
-#  "/usr/local/sbin/crun",
-#  "/sbin/crun",
-#  "/bin/crun",
-#  "/run/current-system/sw/bin/crun",
-#]
-
-#kata = [
-#  "/usr/bin/kata-runtime",
-#  "/usr/sbin/kata-runtime",
-#  "/usr/local/bin/kata-runtime",
-#  "/usr/local/sbin/kata-runtime",
-#  "/sbin/kata-runtime",
-#  "/bin/kata-runtime",
-#  "/usr/bin/kata-qemu",
-#  "/usr/bin/kata-fc",
-#]
-
-#runc = [
-#  "/usr/bin/runc",
-#  "/usr/sbin/runc",
-#  "/usr/local/bin/runc",
-#  "/usr/local/sbin/runc",
-#  "/sbin/runc",
-#  "/bin/runc",
-#  "/usr/lib/cri-o-runc/sbin/runc",
-#]
-
-#runsc = [
-#  "/usr/bin/runsc",
-#  "/usr/sbin/runsc",
-#  "/usr/local/bin/runsc",
-#  "/usr/local/sbin/runsc",
-#  "/bin/runsc",
-#  "/sbin/runsc",
-#  "/run/current-system/sw/bin/runsc",
-#]
-
-#krun = [
-#  "/usr/bin/krun",
-#  "/usr/local/bin/krun",
-#]
-
-[engine.volume_plugins]
-#testplugin = "/run/podman/plugins/test.sock"
-
-[machine]
-# Number of CPU's a machine is created with.
-#
-#cpus=1
-
-# The size of the disk in GB created when init-ing a podman-machine VM.
-#
-#disk_size=10
-
-# Default image URI when creating a new VM using `podman machine init`.
-# Options: On Linux/Mac, `testing`, `stable`, `next`. On Windows, the major
-# version of the OS (e.g `36`) for Fedora 36. For all platforms you can
-# alternatively specify a custom download URL to an image. Container engines
-# translate URIs $OS and $ARCH to the native OS and ARCH. URI
-# "https://example.com/$OS/$ARCH/foobar.ami" becomes
-# "https://example.com/linux/amd64/foobar.ami" on a Linux AMD machine.
-# The default value is `testing`.
-#
-# image = "testing"
-
-# Memory in MB a machine is created with.
-#
-#memory=2048
-
-# The username to use and create on the podman machine OS for rootless
-# container access.
-#
-#user = "core"
-
-# Host directories to be mounted as volumes into the VM by default.
-# Environment variables like $HOME as well as complete paths are supported for
-# the source and destination. An optional third field `:ro` can be used to
-# tell the container engines to mount the volume readonly.
-#
-# volumes = [
-#  "$HOME:$HOME",
-#]
-
-# The [machine] table MUST be the last entry in this file.
-# (Unless another table is added)
-# TOML does not provide a way to end a table other than a further table being
-# defined, so every key hereafter will be part of [machine] and not the
-# main config.
+### Autogenerated by container.py ###
+
+# The containers configuration file specifies all of the available configuration
+# command-line options/flags for container engine tools like Podman & Buildah,
+# but in a TOML format that can be easily modified and versioned.
+
+# Please refer to containers.conf(5) for details of all configuration options.
+# Not all container engines implement all of the options.
+# All of the options have hard coded defaults and these options will override
+# the built in defaults. Users can then override these options via the command
+# line. Container engines will read containers.conf files in up to three
+# locations in the following order:
+#  1. /usr/share/containers/containers.conf
+#  2. /etc/containers/containers.conf
+#  3. $HOME/.config/containers/containers.conf (Rootless containers ONLY)
+#  Items specified in the latter containers.conf, if they exist, override the
+# previous containers.conf settings, or the default settings.
+
+[containers]
+
+# List of annotation. Specified as
+# "key = value"
+# If it is empty or commented out, no annotations will be added
+#
+#annotations = []
+
+# Used to change the name of the default AppArmor profile of container engine.
+#
+#apparmor_profile = "container-default"
+
+# The hosts entries from the base hosts file are added to the containers hosts
+# file. This must be either an absolute path or as special values "image" which
+# uses the hosts file from the container image or "none" which means
+# no base hosts file is used. The default is "" which will use /etc/hosts.
+#
+#base_hosts_file = ""
+
+# Default way to to create a cgroup namespace for the container
+# Options are:
+# `private` Create private Cgroup Namespace for the container.
+# `host`    Share host Cgroup Namespace with the container.
+#
+#cgroupns = "private"
+
+# Control container cgroup configuration
+# Determines  whether  the  container will create CGroups.
+# Options are:
+# `enabled`   Enable cgroup support within container
+# `disabled`  Disable cgroup support, will inherit cgroups from parent
+# `no-conmon` Do not create a cgroup dedicated to conmon.
+#
+#cgroups = "enabled"
+
+# List of default capabilities for containers. If it is empty or commented out,
+# the default capabilities defined in the container engine will be added.
+#
+default_capabilities = [
+  "CHOWN",
+  "DAC_OVERRIDE",
+  "FOWNER",
+  "FSETID",
+  "KILL",
+  "NET_BIND_SERVICE",
+  "SETFCAP",
+  "SETGID",
+  "SETPCAP",
+  "SETUID",
+  "SYS_CHROOT"
+]
+
+# A list of sysctls to be set in containers by default,
+# specified as "name=value",
+# for example:"net.ipv4.ping_group_range=0 0".
+#
+default_sysctls = [
+  "net.ipv4.ping_group_range=0 0",
+]
+
+# A list of ulimits to be set in containers by default, specified as
+# "<ulimit name>=<soft limit>:<hard limit>", for example:
+# "nofile=1024:2048"
+# See setrlimit(2) for a list of resource names.
+# Any limit not specified here will be inherited from the process launching the
+# container engine.
+# Ulimits has limits for non privileged container engines.
+#
+#default_ulimits = [
+#  "nofile=1280:2560",
+#]
+
+# List of devices. Specified as
+# "<device-on-host>:<device-on-container>:<permissions>", for example:
+# "/dev/sdc:/dev/xvdc:rwm".
+# If it is empty or commented out, only the default devices will be used
+#
+#devices = []
+
+# List of default DNS options to be added to /etc/resolv.conf inside of the container.
+#
+#dns_options = []
+
+# List of default DNS search domains to be added to /etc/resolv.conf inside of the container.
+#
+#dns_searches = []
+
+# Set default DNS servers.
+# This option can be used to override the DNS configuration passed to the
+# container. The special value "none" can be specified to disable creation of
+# /etc/resolv.conf in the container.
+# The /etc/resolv.conf file in the image will be used without changes.
+#
+#dns_servers = []
+
+# Environment variable list for the conmon process; used for passing necessary
+# environment variables to conmon or the runtime.
+#
+#env = [
+#  "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
+#  "TERM=xterm",
+#]
+
+# Pass all host environment variables into the container.
+#
+#env_host = false
+
+# Set the ip for the host.containers.internal entry in the containers /etc/hosts
+# file. This can be set to "none" to disable adding this entry. By default it
+# will automatically choose the host ip.
+#
+# NOTE: When using podman machine this entry will never be added to the containers
+# hosts file instead the gvproxy dns resolver will resolve this hostname. Therefore
+# it is not possible to disable the entry in this case.
+#
+#host_containers_internal_ip = ""
+
+# Default proxy environment variables passed into the container.
+# The environment variables passed in include:
+# http_proxy, https_proxy, ftp_proxy, no_proxy, and the upper case versions of
+# these. This option is needed when host system uses a proxy but container
+# should not use proxy. Proxy environment variables specified for the container
+# in any other way will override the values passed from the host.
+#
+#http_proxy = true
+
+# Run an init inside the container that forwards signals and reaps processes.
+#
+#init = false
+
+# Container init binary, if init=true, this is the init binary to be used for containers.
+#
+#init_path = "/usr/libexec/podman/catatonit"
+
+# Default way to to create an IPC namespace (POSIX SysV IPC) for the container
+# Options are:
+#  "host"     Share host IPC Namespace with the container.
+#  "none"     Create shareable IPC Namespace for the container without a private /dev/shm.
+#  "private"  Create private IPC Namespace for the container, other containers are not allowed to share it.
+#  "shareable" Create shareable IPC Namespace for the container.
+#
+#ipcns = "shareable"
+
+# keyring tells the container engine whether to create
+# a kernel keyring for use within the container.
+#
+#keyring = true
+
+# label tells the container engine whether to use container separation using
+# MAC(SELinux) labeling or not.
+# The label flag is ignored on label disabled systems.
+#
+#label = true
+
+# Logging driver for the container. Available options: k8s-file and journald.
+#
+#log_driver = "k8s-file"
+
+# Maximum size allowed for the container log file. Negative numbers indicate
+# that no size limit is imposed. If positive, it must be >= 8192 to match or
+# exceed conmon's read buffer. The file is truncated and re-opened so the
+# limit is never exceeded.
+#
+#log_size_max = -1
+
+# Specifies default format tag for container log messages.
+# This is useful for creating a specific tag for container log messages.
+# Containers logs default to truncated container ID as a tag.
+#
+#log_tag = ""
+
+# Default way to to create a Network namespace for the container
+# Options are:
+# `private` Create private Network Namespace for the container.
+# `host`    Share host Network Namespace with the container.
+# `none`    Containers do not use the network
+#
+#netns = "private"
+
+# Create /etc/hosts for the container.  By default, container engine manage
+# /etc/hosts, automatically adding  the container's  own  IP  address.
+#
+#no_hosts = false
+
+# Default way to to create a PID namespace for the container
+# Options are:
+# `private` Create private PID Namespace for the container.
+# `host`    Share host PID Namespace with the container.
+#
+#pidns = "private"
+
+# Maximum number of processes allowed in a container.
+#
+#pids_limit = 2048
+
+# Copy the content from the underlying image into the newly created volume
+# when the container is created instead of when it is started. If false,
+# the container engine will not copy the content until the container is started.
+# Setting it to true may have negative performance implications.
+#
+#prepare_volume_on_create = false
+
+# Path to the seccomp.json profile which is used as the default seccomp profile
+# for the runtime.
+#
+#seccomp_profile = "/usr/share/containers/seccomp.json"
+
+# Size of /dev/shm. Specified as <number><unit>.
+# Unit is optional, values:
+# b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
+# If the unit is omitted, the system uses bytes.
+#
+#shm_size = "65536k"
+
+# Set timezone in container. Takes IANA timezones as well as "local",
+# which sets the timezone in the container to match the host machine.
+#
+#tz = ""
+
+# Set umask inside the container
+#
+#umask = "0022"
+
+# Default way to to create a User namespace for the container
+# Options are:
+# `auto`        Create unique User Namespace for the container.
+# `host`    Share host User Namespace with the container.
+#
+#userns = "host"
+
+# Number of UIDs to allocate for the automatic container creation.
+# UIDs are allocated from the "container" UIDs listed in
+# /etc/subuid & /etc/subgid
+#
+#userns_size = 65536
+
+# Default way to to create a UTS namespace for the container
+# Options are:
+# `private`        Create private UTS Namespace for the container.
+# `host`    Share host UTS Namespace with the container.
+#
+#utsns = "private"
+
+# List of volumes. Specified as
+# "<directory-on-host>:<directory-in-container>:<options>", for example:
+# "/db:/var/lib/db:ro".
+# If it is empty or commented out, no volumes will be added
+#
+#volumes = []
+
+[secrets]
+#driver = "file"
+
+[secrets.opts]
+#root = "/example/directory"
+
+[network]
+
+# Network backend determines what network driver will be used to set up and tear down container networks.
+# Valid values are "cni" and "netavark".
+# The default value is empty which means that it will automatically choose CNI or netavark. If there are
+# already containers/images or CNI networks preset it will choose CNI.
+#
+# Before changing this value all containers must be stopped otherwise it is likely that
+# iptables rules and network interfaces might leak on the host. A reboot will fix this.
+#
+network_backend = "netavark"
+
+# Path to directory where CNI plugin binaries are located.
+#
+#cni_plugin_dirs = [
+#  "/usr/local/libexec/cni",
+#  "/usr/libexec/cni",
+#  "/usr/local/lib/cni",
+#  "/usr/lib/cni",
+#  "/opt/cni/bin",
+#]
+
+# The network name of the default network to attach pods to.
+#
+#default_network = "podman"
+
+# The default subnet for the default network given in default_network.
+# If a network with that name does not exist, a new network using that name and
+# this subnet will be created.
+# Must be a valid IPv4 CIDR prefix.
+#
+#default_subnet = "10.88.0.0/16"
+
+# DefaultSubnetPools is a list of subnets and size which are used to
+# allocate subnets automatically for podman network create.
+# It will iterate through the list and will pick the first free subnet
+# with the given size. This is only used for ipv4 subnets, ipv6 subnets
+# are always assigned randomly.
+#
+#default_subnet_pools = [
+#  {"base" = "10.89.0.0/16", "size" = 24},
+#  {"base" = "10.90.0.0/15", "size" = 24},
+#  {"base" = "10.92.0.0/14", "size" = 24},
+#  {"base" = "10.96.0.0/11", "size" = 24},
+#  {"base" = "10.128.0.0/9", "size" = 24},
+#]
+
+# Path to the directory where network configuration files are located.
+# For the CNI backend the default is "/etc/cni/net.d" as root
+# and "$HOME/.config/cni/net.d" as rootless.
+# For the netavark backend "/etc/containers/networks" is used as root
+# and "$graphroot/networks" as rootless.
+#
+#network_config_dir = "/etc/cni/net.d/"
+
+# Port to use for dns forwarding daemon with netavark in rootful bridge
+# mode and dns enabled.
+# Using an alternate port might be useful if other dns services should
+# run on the machine.
+#
+#dns_bind_port = 53
+
+[engine]
+# Index to the active service
+#
+#active_service = production
+
+# The compression format to use when pushing an image.
+# Valid options are: `gzip`, `zstd` and `zstd:chunked`.
+#
+#compression_format = "gzip"
+
+
+# Cgroup management implementation used for the runtime.
+# Valid options "systemd" or "cgroupfs"
+#
+#cgroup_manager = "systemd"
+
+# Environment variables to pass into conmon
+#
+#conmon_env_vars = [
+#  "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+#]
+
+# Paths to look for the conmon container manager binary
+#
+#conmon_path = [
+#  "/usr/libexec/podman/conmon",
+#  "/usr/local/libexec/podman/conmon",
+#  "/usr/local/lib/podman/conmon",
+#  "/usr/bin/conmon",
+#  "/usr/sbin/conmon",
+#  "/usr/local/bin/conmon",
+#  "/usr/local/sbin/conmon"
+#]
+
+# Enforces using docker.io for completing short names in Podman's compatibility
+# REST API. Note that this will ignore unqualified-search-registries and
+# short-name aliases defined in containers-registries.conf(5).
+#compat_api_enforce_docker_hub = true
+
+# Specify the keys sequence used to detach a container.
+# Format is a single character [a-Z] or a comma separated sequence of
+# `ctrl-<value>`, where `<value>` is one of:
+# `a-z`, `@`, `^`, `[`, `\`, `]`, `^` or `_`
+#
+#detach_keys = "ctrl-p,ctrl-q"
+
+# Determines whether engine will reserve ports on the host when they are
+# forwarded to containers. When enabled, when ports are forwarded to containers,
+# ports are held open by as long as the container is running, ensuring that
+# they cannot be reused by other programs on the host. However, this can cause
+# significant memory usage if a container has many ports forwarded to it.
+# Disabling this can save memory.
+#
+#enable_port_reservation = true
+
+# Environment variables to be used when running the container engine (e.g., Podman, Buildah).
+# For example "http_proxy=internal.proxy.company.com".
+# Note these environment variables will not be used within the container.
+# Set the env section under [containers] table, if you want to set environment variables for the container.
+#
+#env = []
+
+# Define where event logs will be stored, when events_logger is "file".
+#events_logfile_path=""
+
+# Sets the maximum size for events_logfile_path.
+# The size can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
+# The format for the size is `<number><unit>`, e.g., `1b` or `3g`.
+# If no unit is included then the size will be read in bytes.
+# When the limit is exceeded, the logfile will be rotated and the old one will be deleted.
+# If the maximum size is set to 0, then no limit will be applied,
+# and the logfile will not be rotated.
+#events_logfile_max_size = "1m"
+
+# Selects which logging mechanism to use for container engine events.
+# Valid values are `journald`, `file` and `none`.
+#
+#events_logger = "journald"
+
+# A is a list of directories which are used to search for helper binaries.
+#
+#helper_binaries_dir = [
+#  "/usr/local/libexec/podman",
+#  "/usr/local/lib/podman",
+#  "/usr/libexec/podman",
+#  "/usr/lib/podman",
+#]
+
+# Path to OCI hooks directories for automatically executed hooks.
+#
+#hooks_dir = [
+#  "/usr/share/containers/oci/hooks.d",
+#]
+
+# Manifest Type (oci, v2s2, or v2s1) to use when pulling, pushing, building
+# container images. By default image pulled and pushed match the format of the
+# source image. Building/committing defaults to OCI.
+#
+#image_default_format = ""
+
+# Default transport method for pulling and pushing for images
+#
+#image_default_transport = "docker://"
+
+# Maximum number of image layers to be copied (pulled/pushed) simultaneously.
+# Not setting this field, or setting it to zero, will fall back to containers/image defaults.
+#
+#image_parallel_copies = 0
+
+# Tells container engines how to handle the builtin image volumes.
+#   * bind: An anonymous named volume will be created and mounted
+#     into the container.
+#   * tmpfs: The volume is mounted onto the container as a tmpfs,
+#     which allows users to create content that disappears when
+#     the container is stopped.
+#   * ignore: All volumes are just ignored and no action is taken.
+#
+#image_volume_mode = ""
+
+# Default command to run the infra container
+#
+#infra_command = "/pause"
+
+# Infra (pause) container image name for pod infra containers.  When running a
+# pod, we start a `pause` process in a container to hold open the namespaces
+# associated with the  pod.  This container does nothing other then sleep,
+# reserving the pods resources for the lifetime of the pod. By default container
+# engines run a builtin container using the pause executable. If you want override
+# specify an image to pull.
+#
+#infra_image = ""
+
+# Specify the locking mechanism to use; valid values are "shm" and "file".
+# Change the default only if you are sure of what you are doing, in general
+# "file" is useful only on platforms where cgo is not available for using the
+# faster "shm" lock type. You may need to run "podman system renumber" after
+# you change the lock type.
+#
+#lock_type** = "shm"
+
+# MultiImageArchive - if true, the container engine allows for storing archives
+# (e.g., of the docker-archive transport) with multiple images.  By default,
+# Podman creates single-image archives.
+#
+#multi_image_archive = "false"
+
+# Default engine namespace
+# If engine is joined to a namespace, it will see only containers and pods
+# that were created in the same namespace, and will create new containers and
+# pods in that namespace.
+# The default namespace is "", which corresponds to no namespace. When no
+# namespace is set, all containers and pods are visible.
+#
+#namespace = ""
+
+# Path to the slirp4netns binary
+#
+#network_cmd_path = ""
+
+# Default options to pass to the slirp4netns binary.
+# Valid options values are:
+#
+# - allow_host_loopback=true|false: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`).
+#   Default is false.
+# - mtu=MTU: Specify the MTU to use for this network. (Default is `65520`).
+# - cidr=CIDR: Specify ip range to use for this network. (Default is `10.0.2.0/24`).
+# - enable_ipv6=true|false: Enable IPv6. Default is true. (Required for `outbound_addr6`).
+# - outbound_addr=INTERFACE: Specify the outbound interface slirp should bind to (ipv4 traffic only).
+# - outbound_addr=IPv4: Specify the outbound ipv4 address slirp should bind to.
+# - outbound_addr6=INTERFACE: Specify the outbound interface slirp should bind to (ipv6 traffic only).
+# - outbound_addr6=IPv6: Specify the outbound ipv6 address slirp should bind to.
+# - port_handler=rootlesskit: Use rootlesskit for port forwarding. Default.
+#   Note: Rootlesskit changes the source IP address of incoming packets to a IP address in the container
+#   network namespace, usually `10.0.2.100`. If your application requires the real source IP address,
+#   e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for
+#   rootless containers when connected to user-defined networks.
+# - port_handler=slirp4netns: Use the slirp4netns port forwarding, it is slower than rootlesskit but
+#   preserves the correct source IP address. This port handler cannot be used for user-defined networks.
+#
+#network_cmd_options = []
+
+# Whether to use chroot instead of pivot_root in the runtime
+#
+#no_pivot_root = false
+
+# Number of locks available for containers and pods.
+# If this is changed, a lock renumber must be performed (e.g. with the
+# 'podman system renumber' command).
+#
+#num_locks = 2048
+
+# Set the exit policy of the pod when the last container exits.
+#pod_exit_policy = "continue"
+
+# Whether to pull new image before running a container
+#
+#pull_policy = "missing"
+
+# Indicates whether the application should be running in remote mode. This flag modifies the
+# --remote option on container engines. Setting the flag to true will default
+# `podman --remote=true` for access to the remote Podman service.
+#
+#remote = false
+
+# Default OCI runtime
+#
+#runtime = "crun"
+
+# List of the OCI runtimes that support --format=json. When json is supported
+# engine will use it for reporting nicer errors.
+#
+#runtime_supports_json = ["crun", "runc", "kata", "runsc", "krun"]
+
+# List of the OCI runtimes that supports running containers with KVM Separation.
+#
+#runtime_supports_kvm = ["kata", "krun"]
+
+# List of the OCI runtimes that supports running containers without cgroups.
+#
+#runtime_supports_nocgroups = ["crun", "krun"]
+
+# Default location for storing temporary container image content. Can be overridden with the TMPDIR environment
+# variable. If you specify "storage", then the location of the
+# container/storage tmp directory will be used.
+# image_copy_tmp_dir="/var/tmp"
+
+# Number of seconds to wait without a connection
+# before the `podman system service` times out and exits
+#
+#service_timeout = 5
+
+# Directory for persistent engine files (database, etc)
+# By default, this will be configured relative to where the containers/storage
+# stores containers
+# Uncomment to change location from this default
+#
+#static_dir = "/var/lib/containers/storage/libpod"
+
+# Number of seconds to wait for container to exit before sending kill signal.
+#
+#stop_timeout = 10
+
+# Number of seconds to wait before exit command in API process is given to.
+# This mimics Docker's exec cleanup behaviour, where the default is 5 minutes (value is in seconds).
+#
+#exit_command_delay = 300
+
+# map of service destinations
+#
+#[service_destinations]
+#  [service_destinations.production]
+#     URI to access the Podman service
+#     Examples:
+#       rootless "unix://run/user/$UID/podman/podman.sock" (Default)
+#       rootful "unix://run/podman/podman.sock (Default)
+#       remote rootless ssh://engineering.lab.company.com/run/user/1000/podman/podman.sock
+#       remote rootful ssh://root@10.10.1.136:22/run/podman/podman.sock
+#
+#    uri = "ssh://user@production.example.com/run/user/1001/podman/podman.sock"
+#    Path to file containing ssh identity key
+#    identity = "~/.ssh/id_rsa"
+
+# Directory for temporary files. Must be tmpfs (wiped after reboot)
+#
+#tmp_dir = "/run/libpod"
+
+# Directory for libpod named volumes.
+# By default, this will be configured relative to where containers/storage
+# stores containers.
+# Uncomment to change location from this default.
+#
+#volume_path = "/var/lib/containers/storage/volumes"
+
+# Default timeout (in seconds) for volume plugin operations.
+# Plugins are external programs accessed via a REST API; this sets a timeout
+# for requests to that API.
+# A value of 0 is treated as no timeout.
+#volume_plugin_timeout = 5
+
+# Paths to look for a valid OCI runtime (crun, runc, kata, runsc, krun, etc)
+[engine.runtimes]
+#crun = [
+#  "/usr/bin/crun",
+#  "/usr/sbin/crun",
+#  "/usr/local/bin/crun",
+#  "/usr/local/sbin/crun",
+#  "/sbin/crun",
+#  "/bin/crun",
+#  "/run/current-system/sw/bin/crun",
+#]
+
+#kata = [
+#  "/usr/bin/kata-runtime",
+#  "/usr/sbin/kata-runtime",
+#  "/usr/local/bin/kata-runtime",
+#  "/usr/local/sbin/kata-runtime",
+#  "/sbin/kata-runtime",
+#  "/bin/kata-runtime",
+#  "/usr/bin/kata-qemu",
+#  "/usr/bin/kata-fc",
+#]
+
+#runc = [
+#  "/usr/bin/runc",
+#  "/usr/sbin/runc",
+#  "/usr/local/bin/runc",
+#  "/usr/local/sbin/runc",
+#  "/sbin/runc",
+#  "/bin/runc",
+#  "/usr/lib/cri-o-runc/sbin/runc",
+#]
+
+#runsc = [
+#  "/usr/bin/runsc",
+#  "/usr/sbin/runsc",
+#  "/usr/local/bin/runsc",
+#  "/usr/local/sbin/runsc",
+#  "/bin/runsc",
+#  "/sbin/runsc",
+#  "/run/current-system/sw/bin/runsc",
+#]
+
+#krun = [
+#  "/usr/bin/krun",
+#  "/usr/local/bin/krun",
+#]
+
+[engine.volume_plugins]
+#testplugin = "/run/podman/plugins/test.sock"
+
+[machine]
+# Number of CPU's a machine is created with.
+#
+#cpus=1
+
+# The size of the disk in GB created when init-ing a podman-machine VM.
+#
+#disk_size=10
+
+# Default image URI when creating a new VM using `podman machine init`.
+# Options: On Linux/Mac, `testing`, `stable`, `next`. On Windows, the major
+# version of the OS (e.g `36`) for Fedora 36. For all platforms you can
+# alternatively specify a custom download URL to an image. Container engines
+# translate URIs $OS and $ARCH to the native OS and ARCH. URI
+# "https://example.com/$OS/$ARCH/foobar.ami" becomes
+# "https://example.com/linux/amd64/foobar.ami" on a Linux AMD machine.
+# The default value is `testing`.
+#
+# image = "testing"
+
+# Memory in MB a machine is created with.
+#
+#memory=2048
+
+# The username to use and create on the podman machine OS for rootless
+# container access.
+#
+#user = "core"
+
+# Host directories to be mounted as volumes into the VM by default.
+# Environment variables like $HOME as well as complete paths are supported for
+# the source and destination. An optional third field `:ro` can be used to
+# tell the container engines to mount the volume readonly.
+#
+# volumes = [
+#  "$HOME:$HOME",
+#]
+
+# The [machine] table MUST be the last entry in this file.
+# (Unless another table is added)
+# TOML does not provide a way to end a table other than a further table being
+# defined, so every key hereafter will be part of [machine] and not the
+# main config.
diff --git a/data/templates/dhcp-server/10-override.conf.j2 b/data/templates/dhcp-server/10-override.conf.j2
deleted file mode 100644
index 1504b6808..000000000
--- a/data/templates/dhcp-server/10-override.conf.j2
+++ /dev/null
@@ -1,30 +0,0 @@
-### Autogenerated by dhcp_server.py ###
-{% set lease_file = '/config/dhcpd.leases' %}
-[Unit]
-Description=ISC DHCP IPv4 server
-Documentation=man:dhcpd(8)
-RequiresMountsFor=/run
-ConditionPathExists=
-ConditionPathExists=/run/dhcp-server/dhcpd.conf
-After=
-After=vyos-router.service
-
-[Service]
-Type=forking
-WorkingDirectory=
-WorkingDirectory=/run/dhcp-server
-RuntimeDirectory=dhcp-server
-RuntimeDirectoryPreserve=yes
-Environment=PID_FILE=/run/dhcp-server/dhcpd.pid CONFIG_FILE=/run/dhcp-server/dhcpd.conf LEASE_FILE={{ lease_file }}
-PIDFile=/run/dhcp-server/dhcpd.pid
-ExecStartPre=/bin/sh -ec '\
-touch ${LEASE_FILE}; \
-chown dhcpd:vyattacfg ${LEASE_FILE}* ; \
-chmod 664 ${LEASE_FILE}* ; \
-/usr/sbin/dhcpd -4 -t -T -q -user dhcpd -group vyattacfg -pf ${PID_FILE} -cf ${CONFIG_FILE} -lf ${LEASE_FILE} '
-ExecStart=
-ExecStart=/usr/sbin/dhcpd -4 -q -user dhcpd -group vyattacfg -pf ${PID_FILE} -cf ${CONFIG_FILE} -lf ${LEASE_FILE}
-Restart=always
-
-[Install]
-WantedBy=multi-user.target
diff --git a/data/templates/dhcp-server/dhcpd.conf.j2 b/data/templates/dhcp-server/dhcpd.conf.j2
deleted file mode 100644
index 639526532..000000000
--- a/data/templates/dhcp-server/dhcpd.conf.j2
+++ /dev/null
@@ -1,250 +0,0 @@
-### Autogenerated by dhcp_server.py ###
-
-# For options please consult the following website:
-# https://www.isc.org/wp-content/uploads/2017/08/dhcp43options.html
-#
-# log-facility local7;
-{% if hostfile_update is vyos_defined %}
-on release {
-    set ClientName = pick-first-value(host-decl-name, option fqdn.hostname, option host-name);
-    set ClientIp = binary-to-ascii(10, 8, ".",leased-address);
-    execute("/usr/libexec/vyos/system/on-dhcp-event.sh", "release", "", ClientIp, "", "");
-}
-on expiry {
-    set ClientName = pick-first-value(host-decl-name, option fqdn.hostname, option host-name);
-    set ClientIp = binary-to-ascii(10, 8, ".",leased-address);
-    execute("/usr/libexec/vyos/system/on-dhcp-event.sh", "release", "", ClientIp, "", "");
-}
-{% endif %}
-
-{{ 'use-host-decl-names on;' if host_decl_name is vyos_defined }}
-ddns-update-style {{ 'interim' if dynamic_dns_update is vyos_defined else 'none' }};
-option rfc3442-static-route code 121 = array of integer 8;
-option windows-static-route code 249 = array of integer 8;
-option wpad-url code 252 = text;
-option rfc8925-ipv6-only-preferred code 108 = unsigned integer 32;
-
-# Vendor specific options - Ubiquiti Networks
-option space ubnt;
-option ubnt.unifi-controller code 1 = ip-address;
-class "ubnt" {
-    match if substring (option vendor-class-identifier , 0, 4) = "ubnt";
-    option vendor-class-identifier "ubnt";
-    vendor-option-space ubnt;
-}
-
-{% if global_parameters is vyos_defined %}
-# The following {{ global_parameters | length }} line(s) have been added as
-# global-parameters in the CLI and have not been validated !!!
-{%     for parameter in global_parameters %}
-{{ parameter }}
-{%     endfor %}
-
-{% endif %}
-{% if failover is vyos_defined %}
-# DHCP failover configuration
-failover peer "{{ failover.name }}" {
-{%     if failover.status == 'primary' %}
-    primary;
-    mclt 1800;
-    split 128;
-{%     elif failover.status == 'secondary' %}
-    secondary;
-{%     endif %}
-    address {{ failover.source_address }};
-    port 647;
-    peer address {{ failover.remote }};
-    peer port 647;
-    max-response-delay 30;
-    max-unacked-updates 10;
-    load balance max seconds 3;
-}
-{% endif %}
-{% if listen_address is vyos_defined %}
-
-# DHCP server serving relay subnet, we need a connector to the real world
-{%     for address in listen_address %}
-# Connected subnet statement for listen-address {{ address }}
-subnet {{ address | network_from_ipv4 }} netmask {{ address | netmask_from_ipv4 }} { }
-{%     endfor %}
-{% endif %}
-
-# Shared network configration(s)
-{% if shared_network_name is vyos_defined %}
-{%     for network, network_config in shared_network_name.items() if network_config.disable is not vyos_defined %}
-shared-network {{ network }} {
-{%         if network_config.authoritative is vyos_defined %}
-    authoritative;
-{%         endif %}
-{%         if network_config.name_server is vyos_defined %}
-    option domain-name-servers {{ network_config.name_server | join(', ') }};
-{%         endif %}
-{%         if network_config.domain_name is vyos_defined %}
-    option domain-name "{{ network_config.domain_name }}";
-{%         endif %}
-{%         if network_config.domain_search is vyos_defined %}
-    option domain-search "{{ network_config.domain_search | join('", "') }}";
-{%         endif %}
-{%         if network_config.ntp_server is vyos_defined %}
-    option ntp-servers {{ network_config.ntp_server | join(', ') }};
-{%         endif %}
-{%         if network_config.ping_check is vyos_defined %}
-    ping-check true;
-{%         endif %}
-{%         if network_config.shared_network_parameters is vyos_defined %}
-    # The following {{ network_config.shared_network_parameters | length }} line(s)
-    # were added as shared-network-parameters in the CLI and have not been validated
-{%             for parameter in network_config.shared_network_parameters %}
-    {{ parameter }}
-{%             endfor %}
-{%         endif %}
-{%         if network_config.subnet is vyos_defined %}
-{%             for subnet, subnet_config in network_config.subnet.items() %}
-{%                 if subnet_config.description is vyos_defined %}
-    # {{ subnet_config.description }}
-{%                 endif %}
-    subnet {{ subnet | address_from_cidr }} netmask {{ subnet | netmask_from_cidr }} {
-{%                 if subnet_config.name_server is vyos_defined %}
-        option domain-name-servers {{ subnet_config.name_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.domain_name is vyos_defined %}
-        option domain-name "{{ subnet_config.domain_name }}";
-{%                 endif %}
-{%                 if subnet_config.domain_search is vyos_defined %}
-        option domain-search "{{ subnet_config.domain_search | join('", "') }}";
-{%                 endif %}
-{%                 if subnet_config.ntp_server is vyos_defined %}
-        option ntp-servers {{ subnet_config.ntp_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.pop_server is vyos_defined %}
-        option pop-server {{ subnet_config.pop_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.smtp_server is vyos_defined %}
-        option smtp-server {{ subnet_config.smtp_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.time_server is vyos_defined %}
-        option time-servers {{ subnet_config.time_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.wins_server is vyos_defined %}
-        option netbios-name-servers {{ subnet_config.wins_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.ipv6_only_preferred is vyos_defined %}
-        option rfc8925-ipv6-only-preferred {{ subnet_config.ipv6_only_preferred }};
-{%                 endif %}
-{%                 if subnet_config.static_route is vyos_defined %}
-{%                     set static_default_route = '' %}
-{%                     if subnet_config.default_router is vyos_defined %}
-{%                         set static_default_route = ', ' ~ '0.0.0.0/0' | isc_static_route(subnet_config.default_router) %}
-{%                     endif %}
-{%                     if subnet_config.static_route is vyos_defined %}
-{%                         set rfc3442_routes = [] %}
-{%                         for route, route_options in subnet_config.static_route.items() %}
-{%                             set rfc3442_routes = rfc3442_routes.append(route | isc_static_route(route_options.next_hop)) %}
-{%                         endfor %}
-        option rfc3442-static-route {{ rfc3442_routes | join(', ') }}{{ static_default_route }};
-        option windows-static-route {{ rfc3442_routes | join(', ') }};
-{%                     endif %}
-{%                 endif %}
-{%                 if subnet_config.ip_forwarding is vyos_defined %}
-        option ip-forwarding true;
-{%                 endif %}
-{%                 if subnet_config.default_router is vyos_defined %}
-        option routers {{ subnet_config.default_router }};
-{%                 endif %}
-{%                 if subnet_config.server_identifier is vyos_defined %}
-        option dhcp-server-identifier {{ subnet_config.server_identifier }};
-{%                 endif %}
-{%                 if subnet_config.subnet_parameters is vyos_defined %}
-        # The following {{ subnet_config.subnet_parameters | length }} line(s) were added as
-        # subnet-parameters in the CLI and have not been validated!!!
-{%                     for parameter in subnet_config.subnet_parameters %}
-        {{ parameter }}
-{%                     endfor %}
-{%                 endif %}
-{%                 if subnet_config.tftp_server_name is vyos_defined %}
-        option tftp-server-name "{{ subnet_config.tftp_server_name }}";
-{%                 endif %}
-{%                 if subnet_config.bootfile_name is vyos_defined %}
-        option bootfile-name "{{ subnet_config.bootfile_name }}";
-        filename "{{ subnet_config.bootfile_name }}";
-{%                 endif %}
-{%                 if subnet_config.bootfile_server is vyos_defined %}
-        next-server {{ subnet_config.bootfile_server }};
-{%                 endif %}
-{%                 if subnet_config.bootfile_size is vyos_defined %}
-        option boot-size {{ subnet_config.bootfile_size }};
-{%                 endif %}
-{%                 if subnet_config.time_offset is vyos_defined %}
-        option time-offset {{ subnet_config.time_offset }};
-{%                 endif %}
-{%                 if subnet_config.wpad_url is vyos_defined %}
-        option wpad-url "{{ subnet_config.wpad_url }}";
-{%                 endif %}
-{%                 if subnet_config.client_prefix_length is vyos_defined %}
-        option subnet-mask {{ ('0.0.0.0/' ~ subnet_config.client_prefix_length) | netmask_from_cidr }};
-{%                 endif %}
-{%                 if subnet_config.lease is vyos_defined %}
-        default-lease-time {{ subnet_config.lease }};
-        max-lease-time {{ subnet_config.lease }};
-{%                 endif %}
-{%                 if network_config.ping_check is not vyos_defined and subnet_config.ping_check is vyos_defined %}
-        ping-check true;
-{%                 endif %}
-{%                 if subnet_config.static_mapping is vyos_defined %}
-{%                     for host, host_config in subnet_config.static_mapping.items() if host_config.disable is not vyos_defined %}
-        host {{ host | replace('_','-') if host_decl_name is vyos_defined else network | replace('_','-') ~ '_' ~ host | replace('_','-') }} {
-{%                         if host_config.ip_address is vyos_defined %}
-            fixed-address {{ host_config.ip_address }};
-{%                         endif %}
-            hardware ethernet {{ host_config.mac_address }};
-{%                         if host_config.static_mapping_parameters is vyos_defined %}
-            # The following {{ host_config.static_mapping_parameters | length }} line(s) were added
-            # as static-mapping-parameters in the CLI and have not been validated
-{%                             for parameter in host_config.static_mapping_parameters %}
-            {{ parameter }}
-{%                             endfor %}
-{%                         endif %}
-        }
-{%                     endfor %}
-{%                 endif %}
-{%                 if subnet_config.vendor_option.ubiquiti.unifi_controller is vyos_defined %}
-        option ubnt.unifi-controller {{ subnet_config.vendor_option.ubiquiti.unifi_controller }};
-{%                 endif %}
-{%                 if subnet_config.range is vyos_defined %}
-{#           pool configuration can only be used if there follows a range option #}
-        pool {
-{%                 endif %}
-{%                 if subnet_config.enable_failover is vyos_defined %}
-            failover peer "{{ failover.name }}";
-            deny dynamic bootp clients;
-{%                 endif %}
-{%                 if subnet_config.range is vyos_defined %}
-{%                     for range, range_options in subnet_config.range.items() %}
-            range {{ range_options.start }} {{ range_options.stop }};
-{%                     endfor %}
-{%                 endif %}
-{%                 if subnet_config.range is vyos_defined %}
-{#           pool configuration can only be used if there follows a range option #}
-        }
-{%                 endif %}
-    }
-{%             endfor %}
-{%         endif %}
-    on commit {
-        set shared-networkname = "{{ network }}";
-{%         if hostfile_update is vyos_defined %}
-        set ClientIp = binary-to-ascii(10, 8, ".", leased-address);
-        set ClientMac = binary-to-ascii(16, 8, ":", substring(hardware, 1, 6));
-        set ClientName = pick-first-value(host-decl-name, option fqdn.hostname, option host-name, "empty_hostname");
-        if not (ClientName = "empty_hostname") {
-            set ClientDomain = pick-first-value(config-option domain-name, "..YYZ!");
-            execute("/usr/libexec/vyos/system/on-dhcp-event.sh", "commit", ClientName, ClientIp, ClientMac, ClientDomain);
-        } else {
-            log(concat("Hostname is not defined for client with IP: ", ClientIP, " MAC: ", ClientMac));
-        }
-{%         endif %}
-    }
-}
-
-{%     endfor %}
-{% endif %}
diff --git a/data/templates/dhcp-server/dhcpdv6.conf.j2 b/data/templates/dhcp-server/dhcpdv6.conf.j2
deleted file mode 100644
index 5c3471316..000000000
--- a/data/templates/dhcp-server/dhcpdv6.conf.j2
+++ /dev/null
@@ -1,132 +0,0 @@
-### Autogenerated by dhcpv6_server.py ###
-
-# For options please consult the following website:
-# https://www.isc.org/wp-content/uploads/2017/08/dhcp43options.html
-
-log-facility local7;
-{% if preference is vyos_defined %}
-option dhcp6.preference {{ preference }};
-{% endif %}
-
-{% if global_parameters.name_server is vyos_defined %}
-option dhcp6.name-servers {{ global_parameters.name_server | join(', ') }};
-{% endif %}
-
-# Vendor specific options - Cisco
-option space cisco code width 2 length width 2;
-option cisco.tftp-servers code 1 = array of ip6-address;
-option vsio.cisco code 9 = encapsulate cisco;
-
-# Shared network configration(s)
-{% if shared_network_name is vyos_defined %}
-{%     for network, network_config in shared_network_name.items() if network_config.disable is not vyos_defined %}
-shared-network {{ network }} {
-{%         if network_config.common_options is vyos_defined %}
-{%             if network_config.common_options.info_refresh_time is vyos_defined %}
-    option dhcp6.info-refresh-time {{ network_config.common_options.info_refresh_time }};
-{%             endif %}
-{%             if network_config.common_options.domain_search is vyos_defined %}
-    option dhcp6.domain-search "{{ network_config.common_options.domain_search | join('", "') }}";
-{%             endif %}
-{%             if network_config.common_options.name_server is vyos_defined %}
-    option dhcp6.name-servers {{ network_config.common_options.name_server | join(', ') }};
-{%             endif %}
-{%         endif %}
-{%         if network_config.subnet is vyos_defined %}
-{%             for subnet, subnet_config in network_config.subnet.items() %}
-    subnet6 {{ subnet }} {
-{%                 if subnet_config.address_range is vyos_defined %}
-{%                     if subnet_config.address_range.prefix is vyos_defined %}
-{%                         for prefix, prefix_config in subnet_config.address_range.prefix.items() %}
-        range6 {{ prefix }} {{ "temporary" if prefix_config.temporary is vyos_defined }};
-{%                         endfor %}
-{%                     endif %}
-{%                     if subnet_config.address_range.start is vyos_defined %}
-{%                         for address, address_config in subnet_config.address_range.start.items() %}
-        range6 {{ address }} {{ address_config.stop }};
-{%                         endfor %}
-{%                     endif %}
-{%                 endif %}
-{%                 if subnet_config.domain_search is vyos_defined %}
-        option dhcp6.domain-search "{{ subnet_config.domain_search | join('", "') }}";
-{%                 endif %}
-{%                 if subnet_config.lease_time is vyos_defined %}
-{%                     if subnet_config.lease_time.default is vyos_defined %}
-        default-lease-time {{ subnet_config.lease_time.default }};
-{%                     endif %}
-{%                     if subnet_config.lease_time.maximum is vyos_defined %}
-        max-lease-time {{ subnet_config.lease_time.maximum }};
-{%                     endif %}
-{%                     if subnet_config.lease_time.minimum is vyos_defined %}
-        min-lease-time {{ subnet_config.lease_time.minimum }};
-{%                     endif %}
-{%                 endif %}
-{%                 if subnet_config.name_server is vyos_defined %}
-        option dhcp6.name-servers {{ subnet_config.name_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.nis_domain is vyos_defined %}
-        option dhcp6.nis-domain-name "{{ subnet_config.nis_domain }}";
-{%                 endif %}
-{%                 if subnet_config.nis_server is vyos_defined %}
-        option dhcp6.nis-servers {{ subnet_config.nis_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.nisplus_domain is vyos_defined %}
-        option dhcp6.nisp-domain-name "{{ subnet_config.nisplus_domain }}";
-{%                 endif %}
-{%                 if subnet_config.nisplus_server is vyos_defined %}
-        option dhcp6.nisp-servers {{ subnet_config.nisplus_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.sip_server is vyos_defined %}
-{%                     set server_ip = [] %}
-{%                     set server_fqdn = [] %}
-{%                     for address in subnet_config.sip_server %}
-{%                         if address | is_ipv6 %}
-{%                             set server_ip = server_ip.append(address) %}
-{%                         else %}
-{%                             set server_fqdn = server_fqdn.append(address) %}
-{%                         endif %}
-{%                     endfor %}
-{%                     if server_ip is vyos_defined and server_ip | length > 0 %}
-        option dhcp6.sip-servers-addresses {{ server_ip | join(', ') }};
-{%                     endif %}
-{%                     if server_fqdn is vyos_defined and server_fqdn | length > 0 %}
-        option dhcp6.sip-servers-names "{{ server_fqdn | join('", "') }}";
-{%                     endif %}
-{%                 endif %}
-{%                 if subnet_config.sntp_server is vyos_defined %}
-        option dhcp6.sntp-servers {{ subnet_config.sntp_server | join(', ') }};
-{%                 endif %}
-{%                 if subnet_config.prefix_delegation.start is vyos_defined %}
-{%                     for prefix, prefix_config in subnet_config.prefix_delegation.start.items() %}
-        prefix6 {{ prefix }} {{ prefix_config.stop }} /{{ prefix_config.prefix_length }};
-{%                     endfor %}
-{%                 endif %}
-{%                 if subnet_config.static_mapping is vyos_defined %}
-
-        # begin configuration of static client mappings
-{%                     for host, host_config in subnet_config.static_mapping.items() if host_config.disable is not vyos_defined %}
-        host {{ network | replace('_','-') }}_{{ host | replace('_','-') }} {
-{%                         if host_config.identifier is vyos_defined %}
-            host-identifier option dhcp6.client-id {{ host_config.identifier }};
-{%                         endif %}
-{%                         if host_config.ipv6_address is vyos_defined %}
-            fixed-address6 {{ host_config.ipv6_address }};
-{%                         endif %}
-{%                         if host_config.ipv6_prefix is vyos_defined %}
-            fixed-prefix6 {{ host_config.ipv6_prefix }};
-{%                         endif %}
-        }
-{%                     endfor %}
-{%                 endif %}
-{%                 if subnet_config.vendor_option.cisco.tftp_server is vyos_defined %}
-        option cisco.tftp-servers {{ subnet_config.vendor_option.cisco.tftp_server | join(', ') }};
-{%                 endif %}
-    }
-{%             endfor %}
-{%         endif %}
-    on commit {
-        set shared-networkname = "{{ network }}";
-    }
-}
-{%     endfor %}
-{% endif %}
diff --git a/data/templates/dhcp-server/kea-ctrl-agent.conf.j2 b/data/templates/dhcp-server/kea-ctrl-agent.conf.j2
new file mode 100644
index 000000000..74c63a7a0
--- /dev/null
+++ b/data/templates/dhcp-server/kea-ctrl-agent.conf.j2
@@ -0,0 +1,14 @@
+{
+    "Control-agent": {
+{% if failover is vyos_defined %}
+        "http-host": "{{ failover.source_address }}",
+        "http-port": 647,
+        "control-sockets": {
+            "dhcp4": {
+                "socket-type": "unix",
+                "socket-name": "/run/kea/dhcp4-ctrl-socket"
+            }
+        }
+{% endif %}
+    }
+}
diff --git a/data/templates/dhcp-server/kea-dhcp4.conf.j2 b/data/templates/dhcp-server/kea-dhcp4.conf.j2
new file mode 100644
index 000000000..6ab13ab27
--- /dev/null
+++ b/data/templates/dhcp-server/kea-dhcp4.conf.j2
@@ -0,0 +1,72 @@
+{
+    "Dhcp4": {
+        "interfaces-config": {
+            "interfaces": [ "*" ],
+            "dhcp-socket-type": "raw",
+            "service-sockets-max-retries": 5,
+            "service-sockets-retry-wait-time": 5000
+        },
+        "control-socket": {
+            "socket-type": "unix",
+            "socket-name": "/run/kea/dhcp4-ctrl-socket"
+        },
+        "lease-database": {
+            "type": "memfile",
+            "persist": true,
+            "name": "{{ lease_file }}"
+        },
+        "option-def": [
+            {
+                "name": "rfc3442-static-route",
+                "code": 121,
+                "type": "record",
+                "array": true,
+                "record-types": "uint8,uint8,uint8,uint8,uint8,uint8,uint8,uint8"
+            },
+            {
+                "name": "windows-static-route",
+                "code": 249,
+                "type": "record",
+                "array": true,
+                "record-types": "uint8,uint8,uint8,uint8,uint8,uint8,uint8,uint8"
+            },
+            {
+                "name": "wpad-url",
+                "code": 252,
+                "type": "string"
+            },
+            {
+                "name": "unifi-controller",
+                "code": 1,
+                "type": "ipv4-address",
+                "space": "ubnt"
+            }
+        ],
+        "hooks-libraries": [
+{% if failover is vyos_defined %}
+            {
+                "library": "/usr/lib/{{ machine }}-linux-gnu/kea/hooks/libdhcp_ha.so",
+                "parameters": {
+                    "high-availability": [{{ failover | kea_failover_json }}]
+                }
+            },
+{% endif %}
+{% if hostfile_update is vyos_defined %}
+            {
+                "library": "/usr/lib/{{ machine }}-linux-gnu/kea/hooks/libdhcp_run_script.so",
+                "parameters": {
+                    "name": "/usr/libexec/vyos/system/on-dhcp-event.sh",
+                    "sync": false
+                }
+            },
+{% endif %}
+            {
+                "library": "/usr/lib/{{ machine }}-linux-gnu/kea/hooks/libdhcp_lease_cmds.so",
+                "parameters": {}
+            }
+        ],
+{% if shared_network_name is vyos_defined %}
+        "shared-networks": {{ shared_network_name | kea_shared_network_json }}
+{% endif %}
+    }
+}
diff --git a/data/templates/dhcp-server/kea-dhcp6.conf.j2 b/data/templates/dhcp-server/kea-dhcp6.conf.j2
new file mode 100644
index 000000000..3ce4e6370
--- /dev/null
+++ b/data/templates/dhcp-server/kea-dhcp6.conf.j2
@@ -0,0 +1,48 @@
+{
+    "Dhcp6": {
+        "interfaces-config": {
+            "interfaces": [ "*" ],
+            "service-sockets-max-retries": 5,
+            "service-sockets-retry-wait-time": 5000
+        },
+        "control-socket": {
+            "socket-type": "unix",
+            "socket-name": "/run/kea/dhcp6-ctrl-socket"
+        },
+        "lease-database": {
+            "type": "memfile",
+            "persist": true,
+            "name": "{{ lease_file }}"
+        },
+        "hooks-libraries": [
+            {
+                "library": "/usr/lib/{{ machine }}-linux-gnu/kea/hooks/libdhcp_lease_cmds.so",
+                "parameters": {}
+            }
+        ],
+        "option-data": [
+{% if global_parameters.name_server is vyos_defined %}
+            {
+                "name": "dns-servers",
+                "code": 23,
+                "space": "dhcp6",
+                "csv-format": true,
+                "data": "{{ global_parameters.name_server | join(", ") }}"
+            }{{ ',' if preference is vyos_defined else '' }}
+{% endif %}
+{% if preference is vyos_defined %}
+            {
+                "name": "preference",
+                "code": 7,
+                "space": "dhcp6",
+                "csv-format": true,
+                "data": "{{ preference }}"
+            }
+{% endif %}
+        ],
+{% if shared_network_name is vyos_defined %}
+        "shared-networks": {{ shared_network_name | kea6_shared_network_json }}
+{% endif %}
+
+    }
+}
diff --git a/data/templates/frr/bgpd.frr.j2 b/data/templates/frr/bgpd.frr.j2
index 6f81174ac..641dac44a 100644
--- a/data/templates/frr/bgpd.frr.j2
+++ b/data/templates/frr/bgpd.frr.j2
@@ -588,6 +588,14 @@ bgp route-reflector allow-outbound-policy
 {% if parameters.tcp_keepalive.idle is vyos_defined and parameters.tcp_keepalive.interval is vyos_defined and parameters.tcp_keepalive.probes is vyos_defined %}
  bgp tcp-keepalive {{ parameters.tcp_keepalive.idle }} {{ parameters.tcp_keepalive.interval }} {{ parameters.tcp_keepalive.probes }}
 {% endif %}
+{% if srv6.locator is vyos_defined %}
+ segment-routing srv6
+  locator {{ srv6.locator }}
+ exit
+{% endif %}
+{% if sid.vpn.per_vrf.export is vyos_defined %}
+ sid vpn per-vrf export {{ sid.vpn.per_vrf.export }}
+{% endif %}
 {% if timers.keepalive is vyos_defined and timers.holdtime is vyos_defined %}
  timers bgp {{ timers.keepalive }} {{ timers.holdtime }}
 {% endif %}
diff --git a/data/templates/frr/eigrpd.frr.j2 b/data/templates/frr/eigrpd.frr.j2
index 67f8a3ad1..3038a0b1d 100644
--- a/data/templates/frr/eigrpd.frr.j2
+++ b/data/templates/frr/eigrpd.frr.j2
@@ -1,21 +1,21 @@
-!
-router eigrp {{ local_as }} {{ 'vrf ' ~ vrf if vrf is vyos_defined }}
-{% if maximum_paths is vyos_defined %}
-maximum-paths {{ maximum_paths }}
-{% endif %}
-{% if metric.weights is vyos_defined %}
-metric weights {{ metric.weights }}
-{% endif %}
-{% if network is vyos_defined %}
-{%     for net in network %}
-network {{ net }}
-{%     endfor %}
-{% endif %}
-{% if redistribute is vyos_defined %}
-{%     for protocol in redistribute %}
-redistribute {{ protocol }}
-{%     endfor %}
-{% endif %}
-{% if variance is vyos_defined %}
-variance {{ variance }}
+!
+router eigrp {{ local_as }} {{ 'vrf ' ~ vrf if vrf is vyos_defined }}
+{% if maximum_paths is vyos_defined %}
+maximum-paths {{ maximum_paths }}
+{% endif %}
+{% if metric.weights is vyos_defined %}
+metric weights {{ metric.weights }}
+{% endif %}
+{% if network is vyos_defined %}
+{%     for net in network %}
+network {{ net }}
+{%     endfor %}
+{% endif %}
+{% if redistribute is vyos_defined %}
+{%     for protocol in redistribute %}
+redistribute {{ protocol }}
+{%     endfor %}
+{% endif %}
+{% if variance is vyos_defined %}
+variance {{ variance }}
 {% endif %}
 \ No newline at end of file
diff --git a/data/templates/frr/zebra.segment_routing.frr.j2 b/data/templates/frr/zebra.segment_routing.frr.j2
new file mode 100644
index 000000000..7b12fcdd0
--- /dev/null
+++ b/data/templates/frr/zebra.segment_routing.frr.j2
@@ -0,0 +1,23 @@
+!
+{% if srv6.locator is vyos_defined %}
+segment-routing
+ srv6
+  locators
+{%     for locator, locator_config in srv6.locator.items() %}
+   locator {{ locator }}
+{%         if locator_config.prefix is vyos_defined %}
+    prefix {{ locator_config.prefix }} block-len {{ locator_config.block_len }} node-len {{ locator_config.node_len }} func-bits {{ locator_config.func_bits }}
+{%         endif %}
+{%         if locator_config.behavior_usid is vyos_defined %}
+    behavior usid
+{%         endif %}
+    exit
+    !
+{%     endfor %}
+  exit
+  !
+exit
+!
+exit
+!
+{% endif %}
diff --git a/data/templates/system/sysctl.conf.j2 b/data/templates/system/sysctl.conf.j2
index 59a19e157..db699c3d8 100644
--- a/data/templates/system/sysctl.conf.j2
+++ b/data/templates/system/sysctl.conf.j2
@@ -1,7 +1,7 @@
-# autogenerated by system_sysctl.py
-
-{% if parameter is vyos_defined %}
-{%     for k, v in parameter.items() %}
-{{ k }} = {{ v.value }}
-{%     endfor %}
-{% endif %}
+# autogenerated by system_sysctl.py
+
+{% if parameter is vyos_defined %}
+{%     for k, v in parameter.items() %}
+{{ k }} = {{ v.value }}
+{%     endfor %}
+{% endif %}
diff --git a/data/templates/telegraf/telegraf.j2 b/data/templates/telegraf/telegraf.j2
index 02a9656da..9623bdec6 100644
--- a/data/templates/telegraf/telegraf.j2
+++ b/data/templates/telegraf/telegraf.j2
@@ -89,6 +89,8 @@
     ignore_fs = ["devtmpfs", "devfs"]
 [[inputs.diskio]]
 [[inputs.mem]]
+[[inputs.net]]
+    ignore_protocol_stats = true
 [[inputs.nstat]]
 [[inputs.system]]
 [[inputs.netstat]]