diff options
Diffstat (limited to 'data')
| -rw-r--r-- | data/configd-include.json | 1 | ||||
| -rw-r--r-- | data/templates/firewall/upnpd.conf.tmpl | 172 | ||||
| -rw-r--r-- | data/templates/monitoring/telegraf.tmpl | 5 | ||||
| -rw-r--r-- | data/templates/ssh/sshd_config.tmpl | 1 |
4 files changed, 174 insertions, 5 deletions
diff --git a/data/configd-include.json b/data/configd-include.json index 739f2f6c8..c85ab0725 100644 --- a/data/configd-include.json +++ b/data/configd-include.json @@ -55,6 +55,7 @@ "service_mdns-repeater.py", "service_pppoe-server.py", "service_router-advert.py", +"service_upnp.py", "ssh.py", "system-ip.py", "system-ipv6.py", diff --git a/data/templates/firewall/upnpd.conf.tmpl b/data/templates/firewall/upnpd.conf.tmpl new file mode 100644 index 000000000..39cb21373 --- /dev/null +++ b/data/templates/firewall/upnpd.conf.tmpl @@ -0,0 +1,172 @@ +# This is the UPNP configuration file + +# WAN network interface +ext_ifname={{ wan_interface }} +{% if wan_ip is defined %} +# If the WAN interface has several IP addresses, you +# can specify the one to use below +{% for addr in wan_ip %} +ext_ip={{ addr }} +{% endfor %} +{% endif %} + +# LAN network interfaces IPs / networks +{% if listen is defined %} +# There can be multiple listening IPs for SSDP traffic, in that case +# use multiple 'listening_ip=...' lines, one for each network interface. +# It can be IP address or network interface name (ie. "eth0") +# It is mandatory to use the network interface name in order to enable IPv6 +# HTTP is available on all interfaces. +# When MULTIPLE_EXTERNAL_IP is enabled, the external IP +# address associated with the subnet follows. For example: +# listening_ip=192.168.0.1/24 88.22.44.13 +{% for addr in listen %} +{% if addr | is_ipv4 %} +listening_ip={{ addr }} +{% elif addr | is_ipv6 %} +ipv6_listening_ip={{ addr }} +{% else %} +listening_ip={{ addr }} +{% endif %} +{% endfor %} +{% endif %} + +# CAUTION: mixing up WAN and LAN interfaces may introduce security risks! +# Be sure to assign the correct interfaces to LAN and WAN and consider +# implementing UPnP permission rules at the bottom of this configuration file + +# Port for HTTP (descriptions and SOAP) traffic. Set to 0 for autoselect. +#http_port=0 +# Port for HTTPS. Set to 0 for autoselect (default) +#https_port=0 + +# Path to the UNIX socket used to communicate with MiniSSDPd +# If running, MiniSSDPd will manage M-SEARCH answering. +# default is /var/run/minissdpd.sock +#minissdpdsocket=/var/run/minissdpd.sock + +{% if nat_pmp is defined %} +# Enable NAT-PMP support (default is no) +enable_natpmp=yes +{% endif %} + +# Enable UPNP support (default is yes) +enable_upnp=yes + +{% if pcp_lifetime is defined %} +# PCP +# Configure the minimum and maximum lifetime of a port mapping in seconds +# 120s and 86400s (24h) are suggested values from PCP-base +{% if pcp_lifetime.max is defined %} +max_lifetime={{ pcp_lifetime.max }} +{% endif %} +{% if pcp_lifetime.min is defined %} +min_lifetime={{ pcp_lifetime.min }} +{% endif %} +{% endif %} + + +# To enable the next few runtime options, see compile time +# ENABLE_MANUFACTURER_INFO_CONFIGURATION (config.h) + +{% if friendly_name is defined %} +# Name of this service, default is "`uname -s` router" +friendly_name= {{ friendly_name }} +{% endif %} + +# Manufacturer name, default is "`uname -s`" +manufacturer_name=VyOS + +# Manufacturer URL, default is URL of OS vendor +manufacturer_url=https://vyos.io/ + +# Model name, default is "`uname -s` router" +model_name=VyOS Router Model + +# Model description, default is "`uname -s` router" +model_description=Vyos open source enterprise router/firewall operating system + +# Model URL, default is URL of OS vendor +model_url=https://vyos.io/ + +{% if secure_mode is defined %} +# Secure Mode, UPnP clients can only add mappings to their own IP +secure_mode=yes +{% else %} +# Secure Mode, UPnP clients can only add mappings to their own IP +secure_mode=no +{% endif %} + +{% if presentation_url is defined %} +# Default presentation URL is HTTP address on port 80 +# If set to an empty string, no presentationURL element will appear +# in the XML description of the device, which prevents MS Windows +# from displaying an icon in the "Network Connections" panel. +#presentation_url= {{ presentation_url }} +{% endif %} + +# Report system uptime instead of daemon uptime +system_uptime=yes + +# Unused rules cleaning. +# never remove any rule before this threshold for the number +# of redirections is exceeded. default to 20 +clean_ruleset_threshold=10 +# Clean process work interval in seconds. default to 0 (disabled). +# a 600 seconds (10 minutes) interval makes sense +clean_ruleset_interval=600 + +# Anchor name in pf (default is miniupnpd) +anchor=VyOS + +uuid={{ uuid }} + +# Lease file location +lease_file=/config/upnp.leases + +# Daemon's serial and model number when reporting to clients +# (in XML description) +#serial=12345678 +#model_number=1 + +{% if rules is defined %} +# UPnP permission rules +# (allow|deny) (external port range) IP/mask (internal port range) +# A port range is <min port>-<max port> or <port> if there is only +# one port in the range. +# IP/mask format must be nnn.nnn.nnn.nnn/nn +# It is advised to only allow redirection of port >= 1024 +# and end the rule set with "deny 0-65535 0.0.0.0/0 0-65535" +# The following default ruleset allows specific LAN side IP addresses +# to request only ephemeral ports. It is recommended that users +# modify the IP ranges to match their own internal networks, and +# also consider implementing network-specific restrictions +# CAUTION: failure to enforce any rules may permit insecure requests to be made! +{% for rule, config in rules.items() %} +{% if config.disable is defined %} +{{ config.action}} {{ config.external_port_range }} {{ config.ip }} {{ config.internal_port_range }} +{% endif %} +{% endfor %} +{% endif %} + +{% if stun is defined %} +# WAN interface must have public IP address. Otherwise it is behind NAT +# and port forwarding is impossible. In some cases WAN interface can be +# behind unrestricted NAT 1:1 when all incoming traffic is NAT-ed and +# routed to WAN interfaces without any filtering. In this cases miniupnpd +# needs to know public IP address and it can be learnt by asking external +# server via STUN protocol. Following option enable retrieving external +# public IP address from STUN server and detection of NAT type. You need +# to specify also external STUN server in stun_host option below. +# This option is disabled by default. +ext_perform_stun=yes +# Specify STUN server, either hostname or IP address +# Some public STUN servers: +# stun.stunprotocol.org +# stun.sipgate.net +# stun.xten.com +# stun.l.google.com (on non standard port 19302) +ext_stun_host={{ stun.host }} +# Specify STUN UDP port, by default it is standard port 3478. +ext_stun_port={{ stun.port }} +{% endif %} diff --git a/data/templates/monitoring/telegraf.tmpl b/data/templates/monitoring/telegraf.tmpl index afc04aa6d..f05396d91 100644 --- a/data/templates/monitoring/telegraf.tmpl +++ b/data/templates/monitoring/telegraf.tmpl @@ -42,11 +42,6 @@ dirs = ["/proc/sys/net/ipv4/netfilter","/proc/sys/net/netfilter"] [[inputs.ethtool]] interface_include = {{ interfaces_ethernet }} -[[inputs.iptables]] - use_sudo = false - table = "filter" - chains = {{ nft_chains }} - use_lock = true [[inputs.ntpq]] dns_lookup = true [[inputs.internal]] diff --git a/data/templates/ssh/sshd_config.tmpl b/data/templates/ssh/sshd_config.tmpl index 2f2b78a66..670cf85a1 100644 --- a/data/templates/ssh/sshd_config.tmpl +++ b/data/templates/ssh/sshd_config.tmpl @@ -29,6 +29,7 @@ UsePAM yes PermitRootLogin no PidFile /run/sshd/sshd.pid AddressFamily any +DebianBanner no # # User configurable section |