diff options
Diffstat (limited to 'python/vyos/configdict.py')
| -rw-r--r-- | python/vyos/configdict.py | 380 |
1 files changed, 0 insertions, 380 deletions
diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index d79365722..53b5f9492 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -267,383 +267,3 @@ def get_interface_dict(config, base, ifname): return dict -dhcpv6_pd_default_data = { - 'dhcpv6_prm_only': False, - 'dhcpv6_temporary': False, - 'dhcpv6_pd_length': '', - 'dhcpv6_pd_interfaces': [] -} - -interface_default_data = { - **dhcpv6_pd_default_data, - 'address': [], - 'address_remove': [], - 'description': '', - 'dhcp_client_id': '', - 'dhcp_hostname': '', - 'dhcp_vendor_class_id': '', - 'disable': False, - 'disable_link_detect': 1, - 'ip_disable_arp_filter': 1, - 'ip_enable_arp_accept': 0, - 'ip_enable_arp_announce': 0, - 'ip_enable_arp_ignore': 0, - 'ip_proxy_arp': 0, - 'ipv6_accept_ra': 1, - 'ipv6_autoconf': 0, - 'ipv6_eui64_prefix': [], - 'ipv6_eui64_prefix_remove': [], - 'ipv6_forwarding': 1, - 'ipv6_dup_addr_detect': 1, - 'is_bridge_member': False, - 'mac': '', - 'mtu': 1500, - 'vrf': '' -} - -vlan_default = { - **interface_default_data, - 'egress_qos': '', - 'egress_qos_changed': False, - 'ingress_qos': '', - 'ingress_qos_changed': False, - 'vif_c': {}, - 'vif_c_remove': [] -} - -# see: https://docs.python.org/3/library/enum.html#functional-api -disable = Enum('disable','none was now both') - -def disable_state(conf, check=[3,5,7]): - """ - return if and how a particual section of the configuration is has disable'd - using "disable" including if it was disabled by one of its parent. - - check: a list of the level we should check, here 7,5 and 3 - interfaces ethernet eth1 vif-s 1 vif-c 2 disable - interfaces ethernet eth1 vif 1 disable - interfaces ethernet eth1 disable - - it returns an enum (none, was, now, both) - """ - - # save where we are in the config - current_level = conf.get_level() - - # logic to figure out if the interface (or one of it parent is disabled) - eff_disable = False - act_disable = False - - levels = check[:] - working_level = current_level[:] - - while levels: - position = len(working_level) - if not position: - break - if position not in levels: - working_level = working_level[:-1] - continue - - levels.remove(position) - conf.set_level(working_level) - working_level = working_level[:-1] - - eff_disable = eff_disable or conf.exists_effective('disable') - act_disable = act_disable or conf.exists('disable') - - conf.set_level(current_level) - - # how the disabling changed - if eff_disable and act_disable: - return disable.both - if eff_disable and not eff_disable: - return disable.was - if not eff_disable and act_disable: - return disable.now - return disable.none - - -def intf_to_dict(conf, default): - from vyos.ifconfig import Interface - - """ - Common used function which will extract VLAN related information from config - and represent the result as Python dictionary. - - Function call's itself recursively if a vif-s/vif-c pair is detected. - """ - - intf = deepcopy(default) - intf['intf'] = ifname_from_config(conf) - - current_vif_list = conf.list_nodes(['vif']) - previous_vif_list = conf.list_effective_nodes(['vif']) - - # set the vif to be deleted - for vif in previous_vif_list: - if vif not in current_vif_list: - intf['vif_remove'].append(vif) - - # retrieve interface description - if conf.exists(['description']): - intf['description'] = conf.return_value(['description']) - - # get DHCP client identifier - if conf.exists(['dhcp-options', 'client-id']): - intf['dhcp_client_id'] = conf.return_value(['dhcp-options', 'client-id']) - - # DHCP client host name (overrides the system host name) - if conf.exists(['dhcp-options', 'host-name']): - intf['dhcp_hostname'] = conf.return_value(['dhcp-options', 'host-name']) - - # DHCP client vendor identifier - if conf.exists(['dhcp-options', 'vendor-class-id']): - intf['dhcp_vendor_class_id'] = conf.return_value( - ['dhcp-options', 'vendor-class-id']) - - # DHCPv6 only acquire config parameters, no address - if conf.exists(['dhcpv6-options', 'parameters-only']): - intf['dhcpv6_prm_only'] = True - - # DHCPv6 prefix delegation (RFC3633) - current_level = conf.get_level() - if conf.exists(['dhcpv6-options', 'prefix-delegation']): - dhcpv6_pd_path = current_level + ['dhcpv6-options', 'prefix-delegation'] - conf.set_level(dhcpv6_pd_path) - - # retriebe DHCPv6-PD prefix helper length as some ISPs only hand out a - # /64 by default (https://phabricator.vyos.net/T2506) - if conf.exists(['length']): - intf['dhcpv6_pd_length'] = conf.return_value(['length']) - - for interface in conf.list_nodes(['interface']): - conf.set_level(dhcpv6_pd_path + ['interface', interface]) - pd = { - 'ifname': interface, - 'sla_id': '', - 'sla_len': '', - 'if_id': '' - } - - if conf.exists(['sla-id']): - pd['sla_id'] = conf.return_value(['sla-id']) - - if conf.exists(['sla-len']): - pd['sla_len'] = conf.return_value(['sla-len']) - - if conf.exists(['address']): - pd['if_id'] = conf.return_value(['address']) - - intf['dhcpv6_pd_interfaces'].append(pd) - - # re-set config level - conf.set_level(current_level) - - # DHCPv6 temporary IPv6 address - if conf.exists(['dhcpv6-options', 'temporary']): - intf['dhcpv6_temporary'] = True - - # ignore link state changes - if conf.exists(['disable-link-detect']): - intf['disable_link_detect'] = 2 - - # ARP filter configuration - if conf.exists(['ip', 'disable-arp-filter']): - intf['ip_disable_arp_filter'] = 0 - - # ARP enable accept - if conf.exists(['ip', 'enable-arp-accept']): - intf['ip_enable_arp_accept'] = 1 - - # ARP enable announce - if conf.exists(['ip', 'enable-arp-announce']): - intf['ip_enable_arp_announce'] = 1 - - # ARP enable ignore - if conf.exists(['ip', 'enable-arp-ignore']): - intf['ip_enable_arp_ignore'] = 1 - - # Enable Proxy ARP - if conf.exists(['ip', 'enable-proxy-arp']): - intf['ip_proxy_arp'] = 1 - - # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC) - if conf.exists(['ipv6', 'address', 'autoconf']): - intf['ipv6_autoconf'] = 1 - - # Disable IPv6 forwarding on this interface - if conf.exists(['ipv6', 'disable-forwarding']): - intf['ipv6_forwarding'] = 0 - - # check if interface is member of a bridge - intf['is_bridge_member'] = is_member(conf, intf['intf'], 'bridge') - - # IPv6 Duplicate Address Detection (DAD) tries - if conf.exists(['ipv6', 'dup-addr-detect-transmits']): - intf['ipv6_dup_addr_detect'] = int( - conf.return_value(['ipv6', 'dup-addr-detect-transmits'])) - - # Media Access Control (MAC) address - if conf.exists(['mac']): - intf['mac'] = conf.return_value(['mac']) - - # Maximum Transmission Unit (MTU) - if conf.exists(['mtu']): - intf['mtu'] = int(conf.return_value(['mtu'])) - - # retrieve VRF instance - if conf.exists(['vrf']): - intf['vrf'] = conf.return_value(['vrf']) - - # egress QoS - if conf.exists(['egress-qos']): - intf['egress_qos'] = conf.return_value(['egress-qos']) - - # egress changes QoS require VLAN interface recreation - if conf.return_effective_value(['egress-qos']): - if intf['egress_qos'] != conf.return_effective_value(['egress-qos']): - intf['egress_qos_changed'] = True - - # ingress QoS - if conf.exists(['ingress-qos']): - intf['ingress_qos'] = conf.return_value(['ingress-qos']) - - # ingress changes QoS require VLAN interface recreation - if conf.return_effective_value(['ingress-qos']): - if intf['ingress_qos'] != conf.return_effective_value(['ingress-qos']): - intf['ingress_qos_changed'] = True - - # Get the interface addresses - intf['address'] = conf.return_values(['address']) - - # addresses to remove - difference between effective and working config - intf['address_remove'] = list_diff( - conf.return_effective_values(['address']), intf['address']) - - # Get prefixes for IPv6 addressing based on MAC address (EUI-64) - intf['ipv6_eui64_prefix'] = conf.return_values(['ipv6', 'address', 'eui64']) - - # EUI64 to remove - difference between effective and working config - intf['ipv6_eui64_prefix_remove'] = list_diff( - conf.return_effective_values(['ipv6', 'address', 'eui64']), - intf['ipv6_eui64_prefix']) - - # Determine if the interface should be disabled - disabled = disable_state(conf) - if disabled == disable.both: - # was and is still disabled - intf['disable'] = True - elif disabled == disable.now: - # it is now disable but was not before - intf['disable'] = True - elif disabled == disable.was: - # it was disable but not anymore - intf['disable'] = False - else: - # normal change - intf['disable'] = False - - # Remove the default link-local address if no-default-link-local is set, - # if member of a bridge or if disabled (it may not have a MAC if it's down) - if ( conf.exists(['ipv6', 'address', 'no-default-link-local']) - or intf.get('is_bridge_member') or intf['disable'] ): - intf['ipv6_eui64_prefix_remove'].append('fe80::/64') - else: - # add the link-local by default to make IPv6 work - intf['ipv6_eui64_prefix'].append('fe80::/64') - - # If MAC has changed, remove and re-add all IPv6 EUI64 addresses - try: - interface = Interface(intf['intf'], create=False) - if intf['mac'] and intf['mac'] != interface.get_mac(): - intf['ipv6_eui64_prefix_remove'] += intf['ipv6_eui64_prefix'] - except Exception: - # If the interface does not exist, it could not have changed - pass - - # to make IPv6 SLAAC and DHCPv6 work with forwarding=1, - # accept_ra must be 2 - if intf['ipv6_autoconf'] or 'dhcpv6' in intf['address']: - intf['ipv6_accept_ra'] = 2 - - return intf, disable - - - -def add_to_dict(conf, disabled, ifdict, section, key): - """ - parse a section of vif/vif-s/vif-c and add them to the dict - follow the convention to: - * use the "key" for what to add - * use the "key" what what to remove - - conf: is the Config() already at the level we need to parse - disabled: is a disable enum so we know how to handle to data - intf: if the interface dictionary - section: is the section name to parse (vif/vif-s/vif-c) - key: is the dict key to use (vif/vifs/vifc) - """ - - if not conf.exists(section): - return ifdict - - effect = conf.list_effective_nodes(section) - active = conf.list_nodes(section) - - # the section to parse for vlan - sections = [] - - # determine which interfaces to add or remove based on disable state - if disabled == disable.both: - # was and is still disabled - ifdict[f'{key}_remove'] = [] - elif disabled == disable.now: - # it is now disable but was not before - ifdict[f'{key}_remove'] = effect - elif disabled == disable.was: - # it was disable but not anymore - ifdict[f'{key}_remove'] = [] - sections = active - else: - # normal change - # get interfaces (currently effective) - to determine which - # interface is no longer present and needs to be removed - ifdict[f'{key}_remove'] = list_diff(effect, active) - sections = active - - current_level = conf.get_level() - - # add each section, the key must already exists - for s in sections: - # set config level to vif interface - conf.set_level(current_level + [section, s]) - # add the vlan config as a key (vlan id) - value (config) pair - ifdict[key][s] = vlan_to_dict(conf) - - # re-set configuration level to leave things as found - conf.set_level(current_level) - - return ifdict - - -def vlan_to_dict(conf, default=vlan_default): - from vyos.ifconfig.interface import get_ethertype - vlan, disabled = intf_to_dict(conf, default) - - # if this is a not within vif-s node, we are done - if conf.get_level()[-2] != 'vif-s': - return vlan - - # ethertype is mandatory on vif-s nodes and only exists here! - # ethertype uses a default of 0x88A8 - tmp = '0x88A8' - if conf.exists('ethertype'): - tmp = conf.return_value('ethertype') - vlan['ethertype'] = get_ethertype(tmp) - - # check if there is a Q-in-Q vlan customer interface - # and call this function recursively - add_to_dict(conf, disable, vlan, 'vif-c', 'vif_c') - - return vlan |