diff options
Diffstat (limited to 'python/vyos')
| -rw-r--r-- | python/vyos/configdict.py | 377 | ||||
| -rw-r--r-- | python/vyos/ifconfig/vlan.py | 40 |
2 files changed, 284 insertions, 133 deletions
diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index 2ce8a795f..e1b704a31 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -18,7 +18,12 @@ A library for retrieving value dicts from VyOS configs in a declarative fashion. """ +from enum import Enum +from copy import deepcopy + from vyos import ConfigError +from vyos.ifconfig import Interface + def retrieve_config(path_hash, base_path, config): """ @@ -98,192 +103,338 @@ def get_ethertype(ethertype_val): raise ConfigError('invalid ethertype "{}"'.format(ethertype_val)) -def vlan_to_dict(conf): +vlan_default = { + 'address': [], + 'address_remove': [], + 'description': '', + 'dhcp_client_id': '', + 'dhcp_hostname': '', + 'dhcp_vendor_class_id': '', + 'dhcpv6_prm_only': False, + 'dhcpv6_temporary': False, + 'disable': False, + 'disable_link_detect': 1, + 'egress_qos': '', + 'egress_qos_changed': False, + 'ip_disable_arp_filter': 1, + 'ip_enable_arp_accept': 0, + 'ip_enable_arp_announce': 0, + 'ip_enable_arp_ignore': 0, + 'ip_proxy_arp': 0, + 'ipv6_autoconf': 0, + 'ipv6_eui64_prefix': [], + 'ipv6_eui64_prefix_remove': [], + 'ipv6_forwarding': 1, + 'ipv6_dup_addr_detect': 1, + 'ingress_qos': '', + 'ingress_qos_changed': False, + 'mac': '', + 'mtu': 1500, + 'vif_c': [], + 'vif_c_remove': [], + 'vrf': '' +} + +# see: https://docs.python.org/3/library/enum.html#functional-api +disable = Enum('disable','none was now both') + +def disable_state(conf, check=[3,5,7]): + """ + return if and how a particual section of the configuration is has disable'd + using "disable" including if it was disabled by one of its parent. + + check: a list of the level we should check, here 7,5 and 3 + interfaces ethernet eth1 vif-s 1 vif-c 2 disable + interfaces ethernet eth1 vif 1 disable + interfaces ethernet eth1 disable + + it returns an enum (none, was, now, both) + """ + + # save where we are in the config + current_level = conf.get_level() + + # logic to figure out if the interface (or one of it parent is disabled) + eff_disable = False + act_disable = False + + levels = check[:] + working_level = current_level[:] + + while levels: + position = len(working_level) + if not position: + break + if position not in levels: + working_level = working_level[:-1] + continue + + levels.remove(position) + conf.set_level(working_level) + working_level = working_level[:-1] + + eff_disable = eff_disable or conf.exists_effective('disable') + act_disable = act_disable or conf.exists('disable') + + conf.set_level(current_level) + + # how the disabling changed + if eff_disable and act_disable: + return disable.both + if eff_disable and not eff_disable: + return disable.was + if not eff_disable and act_disable: + return disable.now + return disable.none + + +def intf_to_dict(conf, default): """ Common used function which will extract VLAN related information from config and represent the result as Python dictionary. Function call's itself recursively if a vif-s/vif-c pair is detected. """ - vlan = { - 'id': conf.get_level()[-1], # get the '100' in 'interfaces bonding bond0 vif-s 100' - 'address': [], - 'address_remove': [], - 'description': '', - 'dhcp_client_id': '', - 'dhcp_hostname': '', - 'dhcp_vendor_class_id': '', - 'dhcpv6_prm_only': False, - 'dhcpv6_temporary': False, - 'disable': False, - 'disable_link_detect': 1, - 'egress_qos': '', - 'egress_qos_changed': False, - 'ip_disable_arp_filter': 1, - 'ip_enable_arp_accept': 0, - 'ip_enable_arp_announce': 0, - 'ip_enable_arp_ignore': 0, - 'ip_proxy_arp': 0, - 'ipv6_autoconf': 0, - 'ipv6_eui64_prefix': [], - 'ipv6_eui64_prefix_remove': [], - 'ipv6_forwarding': 1, - 'ipv6_dup_addr_detect': 1, - 'ingress_qos': '', - 'ingress_qos_changed': False, - 'mac': '', - 'mtu': 1500, - 'vrf': '' - } + + intf = deepcopy(default) + # retrieve configured interface addresses if conf.exists('address'): - vlan['address'] = conf.return_values('address') - - # Determine interface addresses (currently effective) - to determine which - # address is no longer valid and needs to be removed from the bond - eff_addr = conf.return_effective_values('address') - act_addr = conf.return_values('address') - vlan['address_remove'] = list_diff(eff_addr, act_addr) + intf['address'] = conf.return_values('address') # retrieve interface description if conf.exists('description'): - vlan['description'] = conf.return_value('description') + intf['description'] = conf.return_value('description') # get DHCP client identifier if conf.exists('dhcp-options client-id'): - vlan['dhcp_client_id'] = conf.return_value('dhcp-options client-id') + intf['dhcp_client_id'] = conf.return_value('dhcp-options client-id') # DHCP client host name (overrides the system host name) if conf.exists('dhcp-options host-name'): - vlan['dhcp_hostname'] = conf.return_value('dhcp-options host-name') + intf['dhcp_hostname'] = conf.return_value('dhcp-options host-name') # DHCP client vendor identifier if conf.exists('dhcp-options vendor-class-id'): - vlan['dhcp_vendor_class_id'] = conf.return_value('dhcp-options vendor-class-id') + intf['dhcp_vendor_class_id'] = conf.return_value( + 'dhcp-options vendor-class-id') # DHCPv6 only acquire config parameters, no address if conf.exists('dhcpv6-options parameters-only'): - vlan['dhcpv6_prm_only'] = True + intf['dhcpv6_prm_only'] = True # DHCPv6 temporary IPv6 address if conf.exists('dhcpv6-options temporary'): - vlan['dhcpv6_temporary'] = True + intf['dhcpv6_temporary'] = True # ignore link state changes if conf.exists('disable-link-detect'): - vlan['disable_link_detect'] = 2 - - # disable VLAN interface - if conf.exists('disable'): - vlan['disable'] = True + intf['disable_link_detect'] = 2 # ARP filter configuration if conf.exists('ip disable-arp-filter'): - vlan['ip_disable_arp_filter'] = 0 + intf['ip_disable_arp_filter'] = 0 # ARP enable accept if conf.exists('ip enable-arp-accept'): - vlan['ip_enable_arp_accept'] = 1 + intf['ip_enable_arp_accept'] = 1 # ARP enable announce if conf.exists('ip enable-arp-announce'): - vlan['ip_enable_arp_announce'] = 1 + intf['ip_enable_arp_announce'] = 1 # ARP enable ignore if conf.exists('ip enable-arp-ignore'): - vlan['ip_enable_arp_ignore'] = 1 + intf['ip_enable_arp_ignore'] = 1 # Enable Proxy ARP if conf.exists('ip enable-proxy-arp'): - vlan['ip_proxy_arp'] = 1 + intf['ip_proxy_arp'] = 1 # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC) if conf.exists('ipv6 address autoconf'): - vlan['ipv6_autoconf'] = 1 + intf['ipv6_autoconf'] = 1 # Get prefixes for IPv6 addressing based on MAC address (EUI-64) if conf.exists('ipv6 address eui64'): - vlan['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64') - - # Determine currently effective EUI64 addresses - to determine which - # address is no longer valid and needs to be removed - eff_addr = conf.return_effective_values('ipv6 address eui64') - vlan['ipv6_eui64_prefix_remove'] = list_diff(eff_addr, vlan['ipv6_eui64_prefix']) - - # Remove the default link-local address if set. - if conf.exists('ipv6 address no-default-link-local'): - vlan['ipv6_eui64_prefix_remove'].append('fe80::/64') - else: - # add the link-local by default to make IPv6 work - vlan['ipv6_eui64_prefix'].append('fe80::/64') + intf['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64') # Disable IPv6 forwarding on this interface if conf.exists('ipv6 disable-forwarding'): - vlan['ipv6_forwarding'] = 0 - - # IPv6 Duplicate Address Detection (DAD) tries - if conf.exists('ipv6 dup-addr-detect-transmits'): - vlan['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits')) + intf['ipv6_forwarding'] = 0 # Media Access Control (MAC) address if conf.exists('mac'): - vlan['mac'] = conf.return_value('mac') - # always recreate EUI64 addresses if mac is set - # I'm not sure how to check if a vlan interface exists or how to get its current mac. - vlan['ipv6_eui64_prefix_remove'] += vlan['ipv6_eui64_prefix'] + intf['mac'] = conf.return_value('mac') + + # IPv6 Duplicate Address Detection (DAD) tries + if conf.exists('ipv6 dup-addr-detect-transmits'): + intf['ipv6_dup_addr_detect'] = int( + conf.return_value('ipv6 dup-addr-detect-transmits')) # Maximum Transmission Unit (MTU) if conf.exists('mtu'): - vlan['mtu'] = int(conf.return_value('mtu')) + intf['mtu'] = int(conf.return_value('mtu')) # retrieve VRF instance if conf.exists('vrf'): - vlan['vrf'] = conf.return_value('vrf') + intf['vrf'] = conf.return_value('vrf') - # VLAN egress QoS + # egress QoS if conf.exists('egress-qos'): - vlan['egress_qos'] = conf.return_value('egress-qos') + intf['egress_qos'] = conf.return_value('egress-qos') # egress changes QoS require VLAN interface recreation if conf.return_effective_value('egress-qos'): - if vlan['egress_qos'] != conf.return_effective_value('egress-qos'): - vlan['egress_qos_changed'] = True + if intf['egress_qos'] != conf.return_effective_value('egress-qos'): + intf['egress_qos_changed'] = True - # VLAN ingress QoS + # ingress QoS if conf.exists('ingress-qos'): - vlan['ingress_qos'] = conf.return_value('ingress-qos') + intf['ingress_qos'] = conf.return_value('ingress-qos') # ingress changes QoS require VLAN interface recreation if conf.return_effective_value('ingress-qos'): - if vlan['ingress_qos'] != conf.return_effective_value('ingress-qos'): - vlan['ingress_qos_changed'] = True + if intf['ingress_qos'] != conf.return_effective_value('ingress-qos'): + intf['ingress_qos_changed'] = True - # ethertype is mandatory on vif-s nodes and only exists here! - # check if this is a vif-s node at all: - if conf.get_level()[-2] == 'vif-s': - vlan['vif_c'] = [] - vlan['vif_c_remove'] = [] - - # ethertype uses a default of 0x88A8 - tmp = '0x88A8' - if conf.exists('ethertype'): - tmp = conf.return_value('ethertype') - vlan['ethertype'] = get_ethertype(tmp) - - # get vif-c interfaces (currently effective) - to determine which vif-c + disabled = disable_state(conf) + + # Get the interface IPs + eff_addr = conf.return_effective_values('address') + act_addr = conf.return_values('address') + + # Get prefixes for IPv6 addressing based on MAC address (EUI-64) + eff_eui = conf.return_effective_values('ipv6 address eui64') + act_eui = conf.return_values('ipv6 address eui64') + + # Determine what should stay or be removed + if disabled == disable.both: + # was and is still disabled + intf['disable'] = True + intf['address'] = [] + intf['address_remove'] = [] + intf['ipv6_eui64_prefix'] = [] + intf['ipv6_eui64_prefix_remove'] = [] + elif disabled == disable.now: + # it is now disable but was not before + intf['disable'] = True + intf['address'] = [] + intf['address_remove'] = eff_addr + intf['ipv6_eui64_prefix'] = [] + intf['ipv6_eui64_prefix_remove'] = eff_eui + elif disabled == disable.was: + # it was disable but not anymore + intf['disable'] = False + intf['address'] = act_addr + intf['address_remove'] = [] + intf['ipv6_eui64_prefix'] = act_eui + intf['ipv6_eui64_prefix_remove'] = [] + else: + # normal change + intf['disable'] = False + intf['address'] = act_addr + intf['address_remove'] = list_diff(eff_addr, act_addr) + intf['ipv6_eui64_prefix'] = act_eui + intf['ipv6_eui64_prefix_remove'] = list_diff(eff_eui, act_eui) + + # Remove the default link-local address if set. + if conf.exists('ipv6 address no-default-link-local'): + intf['ipv6_eui64_prefix_remove'].append('fe80::/64') + else: + # add the link-local by default to make IPv6 work + intf['ipv6_eui64_prefix'].append('fe80::/64') + + # Find out if MAC has changed + try: + interface = Interface(intf['intf'], create=False) + if intf['mac'] and intf['mac'] != interface.get_mac(): + intf['ipv6_eui64_prefix_remove'] += intf['ipv6_eui64_prefix'] + except Exception: + # If the interface does not exists, it can not have changed + pass + + return intf, disable + + + +def add_to_dict(conf, disabled, ifdict, section, key): + """ + parse a section of vif/vif-s/vif-c and add them to the dict + follow the convention to: + * use the "key" for what to add + * use the "key" what what to remove + + conf: is the Config() already at the level we need to parse + disabled: is a disable enum so we know how to handle to data + intf: if the interface dictionary + section: is the section name to parse (vif/vif-s/vif-c) + key: is the dict key to use (vif/vifs/vifc) + """ + + if not conf.exists(section): + return ifdict + + effect = conf.list_effective_nodes(section) + active = conf.list_nodes(section) + + # the section to parse for vlan + sections = [] + + # Determine interface addresses (currently effective) - to determine which + # address is no longer valid and needs to be removed from the bond + if disabled == disable.both: + # was and is still disabled + ifdict[f'{key}_remove'] = [] + elif disabled == disable.now: + # it is now disable but was not before + ifdict[f'{key}_remove'] = effect + elif disabled == disable.was: + # it was disable but not anymore + ifdict[f'{key}_remove'] = [] + sections = active + else: + # normal change + # get vif-s interfaces (currently effective) - to determine which vif-s # interface is no longer present and needs to be removed - eff_intf = conf.list_effective_nodes('vif-c') - act_intf = conf.list_nodes('vif-c') - vlan['vif_c_remove'] = list_diff(eff_intf, act_intf) - - # check if there is a Q-in-Q vlan customer interface - # and call this function recursively - if conf.exists('vif-c'): - cfg_level = conf.get_level() - # add new key (vif-c) to dictionary - for vif in conf.list_nodes('vif-c'): - # set config level to vif interface - conf.set_level(cfg_level + ['vif-c', vif]) - vlan['vif_c'].append(vlan_to_dict(conf)) + ifdict[f'{key}_remove'] = list_diff(effect, active) + sections = active + + current_level = conf.get_level() + + # add each section, the key must already exists + for s in sections: + # set config level to vif interface + conf.set_level(current_level + [section, s]) + ifdict[f'{key}'].append(vlan_to_dict(conf)) + + # re-set configuration level to leave things as found + conf.set_level(current_level) + + return ifdict + + +def vlan_to_dict(conf, default=vlan_default): + vlan, disabled = intf_to_dict(conf, default) + # get the '100' in 'interfaces bonding bond0 vif-s 100 + vlan['id'] = conf.get_level()[-1] + + current_level = conf.get_level() + + # if this is a not within vif-s node, we are done + if current_level[-2] != 'vif-s': + return vlan + + # ethertype is mandatory on vif-s nodes and only exists here! + # ethertype uses a default of 0x88A8 + tmp = '0x88A8' + if conf.exists('ethertype'): + tmp = conf.return_value('ethertype') + vlan['ethertype'] = get_ethertype(tmp) + + # check if there is a Q-in-Q vlan customer interface + # and call this function recursively + + add_to_dict(conf, disable, vlan, 'vif-c', 'vif_c') return vlan diff --git a/python/vyos/ifconfig/vlan.py b/python/vyos/ifconfig/vlan.py index 7b1e00d87..d68e8f6cd 100644 --- a/python/vyos/ifconfig/vlan.py +++ b/python/vyos/ifconfig/vlan.py @@ -101,26 +101,26 @@ class VLAN: >>> i.add_vlan(10) """ vlan_ifname = self.config['ifname'] + '.' + str(vlan_id) - if not os.path.exists(f'/sys/class/net/{vlan_ifname}'): - self._vlan_id = int(vlan_id) - - if ethertype: - self._ethertype = ethertype - ethertype = 'proto {}'.format(ethertype) - - # Optional ingress QOS mapping - opt_i = '' - if ingress_qos: - opt_i = 'ingress-qos-map ' + ingress_qos - # Optional egress QOS mapping - opt_e = '' - if egress_qos: - opt_e = 'egress-qos-map ' + egress_qos - - # create interface in the system - cmd = 'ip link add link {ifname} name {ifname}.{vlan} type vlan {proto} id {vlan} {opt_e} {opt_i}' \ - .format(ifname=self.config['ifname'], vlan=self._vlan_id, proto=ethertype, opt_e=opt_e, opt_i=opt_i) - self._cmd(cmd) + if os.path.exists(f'/sys/class/net/{vlan_ifname}'): + return self.__class__(vlan_ifname) + + if ethertype: + self._ethertype = ethertype + ethertype = 'proto {}'.format(ethertype) + + # Optional ingress QOS mapping + opt_i = '' + if ingress_qos: + opt_i = 'ingress-qos-map ' + ingress_qos + # Optional egress QOS mapping + opt_e = '' + if egress_qos: + opt_e = 'egress-qos-map ' + egress_qos + + # create interface in the system + cmd = 'ip link add link {ifname} name {ifname}.{vlan} type vlan {proto} id {vlan} {opt_e} {opt_i}' \ + .format(ifname=self.ifname, vlan=vlan_id, proto=ethertype, opt_e=opt_e, opt_i=opt_i) + self._cmd(cmd) # return new object mapping to the newly created interface # we can now work on this object for e.g. IP address setting |