diff options
Diffstat (limited to 'smoketest')
64 files changed, 2695 insertions, 1973 deletions
diff --git a/smoketest/configs/bgp-evpn-leaf b/smoketest/configs/bgp-evpn-leaf new file mode 100644 index 000000000..73d658de8 --- /dev/null +++ b/smoketest/configs/bgp-evpn-leaf @@ -0,0 +1,148 @@ +interfaces { + bridge br100 { + member { + interface eth3 { + } + interface vxlan100 { + } + } + } + dummy dum0 { + address 172.29.0.1/32 + } + ethernet eth0 { + description "Out-of-Band Managament Port" + address 2001:db8::41/64 + address 192.0.2.41/27 + vrf MGMT + } + ethernet eth1 { + address 172.29.1.1/31 + mtu 1600 + } + ethernet eth2 { + address 172.29.2.1/31 + mtu 1600 + } + ethernet eth3 { + } + loopback lo { + } + vxlan vxlan100 { + parameters { + nolearning + } + port 4789 + source-address 172.29.0.1 + vni 100 + } +} +protocols { + bgp 65010 { + address-family { + ipv4-unicast { + maximum-paths { + ibgp 4 + } + redistribute { + connected { + } + } + } + l2vpn-evpn { + advertise-all-vni + } + } + neighbor 172.29.1.0 { + peer-group evpn + } + neighbor 172.29.2.0 { + peer-group evpn + } + parameters { + log-neighbor-changes + } + peer-group evpn { + address-family { + ipv4-unicast { + nexthop-self { + } + } + l2vpn-evpn { + nexthop-self { + } + } + } + remote-as 65010 + } + } + vrf MGMT { + static { + route 0.0.0.0/0 { + next-hop 192.0.2.62 { + } + } + route6 ::/0 { + next-hop 2001:db8::1 { + } + } + } + } +} +service { + lldp { + interface all { + } + } + ssh { + disable-host-validation + vrf MGMT + } +} +system { + config-management { + commit-revisions 100 + } + console { + device ttyS0 { + speed 115200 + } + } + host-name vyos + login { + user vyos { + authentication { + encrypted-password $6$O5gJRlDYQpj$MtrCV9lxMnZPMbcxlU7.FI793MImNHznxGoMFgm3Q6QP3vfKJyOSRCt3Ka/GzFQyW1yZS4NS616NLHaIPPFHc0 + plaintext-password "" + } + } + } + ntp { + listen-address 192.0.2.41 + listen-address 2001:db8::41 + server 0.de.pool.ntp.org { + prefer + } + vrf MGMT + } + syslog { + global { + facility all { + level info + } + facility protocols { + level debug + } + } + } +} +vrf { + name MGMT { + table 1000 + } +} + + +// Warning: Do not remove the following line. +// vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@2:conntrack-sync@1:dhcp-relay@2:dhcp-server@5:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@20:ipoe-server@1:ipsec@5:l2tp@3:lldp@1:mdns@1:nat@5:nat66@1:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@8:rpki@1:salt@1:snmp@2:ssh@2:sstp@3:system@20:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webproxy@2:zone-policy@1" +// Release version: 1.4-rolling-202103091038 diff --git a/smoketest/configs/bgp-evpn-spine b/smoketest/configs/bgp-evpn-spine new file mode 100644 index 000000000..5dafc2f77 --- /dev/null +++ b/smoketest/configs/bgp-evpn-spine @@ -0,0 +1,128 @@ +interfaces { + ethernet eth0 { + description "Out-of-Band Managament Port" + address 192.0.2.51/27 + address 2001:db8::51/64 + vrf MGMT + } + ethernet eth1 { + address 172.29.1.0/31 + mtu 1600 + } + ethernet eth2 { + address 172.29.1.2/31 + mtu 1600 + } + ethernet eth3 { + address 172.29.1.4/31 + mtu 1600 + } + loopback lo { + } +} +protocols { + bgp 65010 { + address-family { + ipv4-unicast { + maximum-paths { + ibgp 4 + } + redistribute { + connected { + } + } + } + } + listen { + range 172.29.1.0/24 { + peer-group evpn + } + } + parameters { + log-neighbor-changes + } + peer-group evpn { + address-family { + ipv4-unicast { + route-reflector-client + } + l2vpn-evpn { + route-reflector-client + } + } + capability { + dynamic + } + remote-as 65010 + } + } + vrf MGMT { + static { + route 0.0.0.0/0 { + next-hop 192.0.2.62 { + } + } + route6 ::/0 { + next-hop 2001:db8::1 { + } + } + } + } +} +service { + lldp { + interface all { + } + } + ssh { + disable-host-validation + vrf MGMT + } +} +system { + config-management { + commit-revisions 100 + } + console { + device ttyS0 { + speed 115200 + } + } + host-name vyos + login { + user vyos { + authentication { + encrypted-password $6$O5gJRlDYQpj$MtrCV9lxMnZPMbcxlU7.FI793MImNHznxGoMFgm3Q6QP3vfKJyOSRCt3Ka/GzFQyW1yZS4NS616NLHaIPPFHc0 + plaintext-password "" + } + } + } + ntp { + listen-address 192.0.2.51 + listen-address 2001:db8::51 + server 0.de.pool.ntp.org { + prefer + } + vrf MGMT + } + syslog { + global { + facility all { + level info + } + facility protocols { + level debug + } + } + } +} +vrf { + name MGMT { + table 1000 + } +} + + +// Warning: Do not remove the following line. +// vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@2:conntrack-sync@1:dhcp-relay@2:dhcp-server@5:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@20:ipoe-server@1:ipsec@5:l2tp@3:lldp@1:mdns@1:nat@5:nat66@1:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@8:rpki@1:salt@1:snmp@2:ssh@2:sstp@3:system@20:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webproxy@2:zone-policy@1" +// Release version: 1.4-rolling-202103091038 diff --git a/smoketest/configs/isis-small b/smoketest/configs/isis-small new file mode 100644 index 000000000..2c42ac9c4 --- /dev/null +++ b/smoketest/configs/isis-small @@ -0,0 +1,105 @@ +interfaces { + dummy dum0 { + address 203.0.113.1/24 + } + ethernet eth0 { + duplex auto + speed auto + } + ethernet eth1 { + address 192.0.2.1/24 + duplex auto + speed auto + } + ethernet eth2 { + duplex auto + speed auto + } + ethernet eth3 { + duplex auto + speed auto + } +} +policy { + prefix-list EXPORT-ISIS { + rule 10 { + action permit + prefix 203.0.113.0/24 + } + } + route-map EXPORT-ISIS { + rule 10 { + action permit + match { + ip { + address { + prefix-list EXPORT-ISIS + } + } + } + } + } +} +protocols { + isis FOO { + interface eth1 { + bfd + } + net 49.0001.1921.6800.1002.00 + redistribute { + ipv4 { + connected { + level-2 { + route-map EXPORT-ISIS + } + } + } + } + } +} +system { + config-management { + commit-revisions 200 + } + console { + device ttyS0 { + speed 115200 + } + } + domain-name vyos.io + host-name vyos + login { + user vyos { + authentication { + encrypted-password $6$2Ta6TWHd/U$NmrX0x9kexCimeOcYK1MfhMpITF9ELxHcaBU/znBq.X2ukQOj61fVI2UYP/xBzP4QtiTcdkgs7WOQMHWsRymO/ + plaintext-password "" + } + level admin + } + } + ntp { + server 0.pool.ntp.org { + } + server 1.pool.ntp.org { + } + server 2.pool.ntp.org { + } + } + syslog { + global { + facility all { + level info + } + facility protocols { + level debug + } + } + } + time-zone Europe/Berlin +} + + +// Warning: Do not remove the following line. +// vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@1:conntrack-sync@1:dhcp-relay@2:dhcp-server@5:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@18:ipoe-server@1:ipsec@5:l2tp@3:lldp@1:mdns@1:nat@5:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@7:rpki@1:salt@1:snmp@2:ssh@2:sstp@3:system@20:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webproxy@2:zone-policy@1" +// Release version: 1.3.0-rc1 + diff --git a/smoketest/configs/vrf-bgp b/smoketest/configs/vrf-bgp new file mode 100644 index 000000000..4ad372a36 --- /dev/null +++ b/smoketest/configs/vrf-bgp @@ -0,0 +1,166 @@ +interfaces { + ethernet eth0 { + address 192.0.2.1/24 + } + ethernet eth1 { + vrf black + } + ethernet eth2 { + vrf black + } +} +protocols { + ospf { + area 0 { + network 192.0.2.0/24 + } + interface eth0 { + authentication { + md5 { + key-id 10 { + md5-key ospfkey + } + } + } + } + log-adjacency-changes { + } + parameters { + abr-type cisco + router-id 1.2.3.4 + } + passive-interface default + passive-interface-exclude eth0 + } +} +system { + config-management { + commit-revisions 100 + } + console { + device ttyS0 { + speed 115200 + } + } + host-name vyos + login { + user vyos { + authentication { + encrypted-password $6$O5gJRlDYQpj$MtrCV9lxMnZPMbcxlU7.FI793MImNHznxGoMFgm3Q6QP3vfKJyOSRCt3Ka/GzFQyW1yZS4NS616NLHaIPPFHc0 + plaintext-password "" + } + } + } + nt + ntp { + server 0.pool.ntp.org { + } + server 1.pool.ntp.org { + } + server 2.pool.ntp.org { + } + } + syslog { + global { + facility all { + level info + } + facility protocols { + level debug + } + } + } + time-zone Europe/Berlin +} +vrf { + name black { + protocols { + bgp 65000 { + address-family { + ipv4-unicast { + network 10.0.150.0/23 { + } + } + ipv6-unicast { + network 2001:db8:200::/40 { + } + } + } + neighbor 10.0.151.222 { + disable-send-community { + extended + standard + } + address-family { + ipv4-unicast { + default-originate { + } + soft-reconfiguration { + inbound + } + } + } + capability { + dynamic + } + remote-as 65010 + } + neighbor 10.0.151.252 { + peer-group VYOSv4 + } + neighbor 10.0.151.254 { + peer-group VYOSv4 + } + neighbor 2001:db8:200:ffff::3 { + peer-group VYOSv6 + } + neighbor 2001:db8:200:ffff::a { + peer-group VYOSv6 + } + neighbor 2001:db8:200:ff::101:2 { + remote-as 65010 + } + parameters { + default { + no-ipv4-unicast + } + log-neighbor-changes + router-id 10.0.151.251 + } + peer-group VYOSv4 { + address-family { + ipv4-unicast { + nexthop-self { + } + } + } + capability { + dynamic + } + remote-as 65000 + update-source dum0 + } + peer-group VYOSv6 { + address-family { + ipv6-unicast { + nexthop-self { + } + } + } + capability { + dynamic + } + remote-as 65000 + update-source dum0 + } + } + + } + table 2000 + } +} + + +// Warning: Do not remove the following line. +// vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@2:conntrack-sync@1:dhcp-relay@2:dhcp-server@5:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@20:ipoe-server@1:ipsec@5:l2tp@3:lldp@1:mdns@1:nat@5:nat66@1:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@9:rpki@1:salt@1:snmp@2:ssh@2:sstp@3:system@20:vrf@2:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webproxy@2:zone-policy@1" +// Release version: 1.4-rolling-202103130218 diff --git a/smoketest/configs/vrf-ospf b/smoketest/configs/vrf-ospf new file mode 100644 index 000000000..7855e86bf --- /dev/null +++ b/smoketest/configs/vrf-ospf @@ -0,0 +1,145 @@ +interfaces { + ethernet eth0 { + address 192.0.2.1/24 + } + ethernet eth1 { + vrf red + } + ethernet eth2 { + vrf blue + } +} +protocols { + ospf { + area 0 { + network 192.0.2.0/24 + } + interface eth0 { + authentication { + md5 { + key-id 10 { + md5-key ospfkey + } + } + } + } + log-adjacency-changes { + } + parameters { + abr-type cisco + router-id 1.2.3.4 + } + passive-interface default + passive-interface-exclude eth0 + } +} +system { + config-management { + commit-revisions 100 + } + console { + device ttyS0 { + speed 115200 + } + } + host-name vyos + login { + user vyos { + authentication { + encrypted-password $6$O5gJRlDYQpj$MtrCV9lxMnZPMbcxlU7.FI793MImNHznxGoMFgm3Q6QP3vfKJyOSRCt3Ka/GzFQyW1yZS4NS616NLHaIPPFHc0 + plaintext-password "" + } + } + } + nt + ntp { + server 0.pool.ntp.org { + } + server 1.pool.ntp.org { + } + server 2.pool.ntp.org { + } + } + syslog { + global { + facility all { + level info + } + facility protocols { + level debug + } + } + } + time-zone Europe/Berlin +} +vrf { + name blue { + protocols { + ospf { + area 0 { + network 172.18.201.0/24 + } + interface eth2 { + authentication { + md5 { + key-id 30 { + md5-key vyoskey456 + } + } + } + dead-interval 40 + hello-interval 10 + priority 1 + retransmit-interval 5 + transmit-delay 1 + } + log-adjacency-changes { + } + parameters { + abr-type cisco + router-id 5.6.7.8 + } + passive-interface default + passive-interface-exclude eth2 + } + } + table 2000 + } + name red { + protocols { + ospf { + area 0 { + network 172.18.202.0/24 + } + interface eth1 { + authentication { + md5 { + key-id 20 { + md5-key vyoskey123 + } + } + } + dead-interval 40 + hello-interval 10 + priority 1 + retransmit-interval 5 + transmit-delay 1 + } + log-adjacency-changes { + } + parameters { + abr-type cisco + router-id 9.10.11.12 + } + passive-interface default + passive-interface-exclude eth1 + } + } + table 1000 + } +} + + +// Warning: Do not remove the following line. +// vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@2:conntrack-sync@1:dhcp-relay@2:dhcp-server@5:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@20:ipoe-server@1:ipsec@5:l2tp@3:lldp@1:mdns@1:nat@5:nat66@1:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@9:rpki@1:salt@1:snmp@2:ssh@2:sstp@3:system@20:vrf@2:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webproxy@2:zone-policy@1" +// Release version: 1.4-rolling-202103130218 diff --git a/smoketest/scripts/cli/base_accel_ppp_test.py b/smoketest/scripts/cli/base_accel_ppp_test.py index 705c932b4..b2acb03cc 100644 --- a/smoketest/scripts/cli/base_accel_ppp_test.py +++ b/smoketest/scripts/cli/base_accel_ppp_test.py @@ -12,10 +12,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import re import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from configparser import ConfigParser from vyos.configsession import ConfigSession @@ -26,26 +26,22 @@ from vyos.util import get_half_cpus from vyos.util import process_named_running class BasicAccelPPPTest: - class BaseTest(unittest.TestCase): - + class TestCase(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) self._gateway = '192.0.2.1' - # ensure we can also run this test on a live system - so lets clean # out the current configuration :) - self.session.delete(self._base_path) + self.cli_delete(self._base_path) def tearDown(self): - self.session.delete(self._base_path) - self.session.commit() - del self.session + self.cli_delete(self._base_path) + self.cli_commit() def set(self, path): - self.session.set(self._base_path + path) + self.cli_set(self._base_path + path) def delete(self, path): - self.session.delete(self._base_path + path) + self.cli_delete(self._base_path + path) def basic_config(self): # PPPoE local auth mode requires local users to be configured! @@ -65,7 +61,7 @@ class BasicAccelPPPTest: self.set(['name-server', ns]) # commit changes - self.session.commit() + self.cli_commit() # Validate configuration values conf = ConfigParser(allow_no_value=True, delimiters='=') @@ -95,11 +91,11 @@ class BasicAccelPPPTest: # upload rate-limit requires also download rate-limit with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() self.set(['authentication', 'local-users', 'username', user, 'rate-limit', 'download', download]) # commit changes - self.session.commit() + self.cli_commit() # Validate configuration values conf = ConfigParser(allow_no_value=True, delimiters='=') @@ -123,7 +119,7 @@ class BasicAccelPPPTest: # Check local-users default value(s) self.delete(['authentication', 'local-users', 'username', user, 'static-ip']) # commit changes - self.session.commit() + self.cli_commit() # check local users tmp = cmd(f'sudo cat {self._chap_secrets}') @@ -162,7 +158,7 @@ class BasicAccelPPPTest: self.set(['authentication', 'radius', 'source-address', source_address]) # commit changes - self.session.commit() + self.cli_commit() # Validate configuration values conf = ConfigParser(allow_no_value=True, delimiters='=') @@ -200,7 +196,7 @@ class BasicAccelPPPTest: self.set(['authentication', 'radius', 'server', radius_server, 'disable-accounting']) # commit changes - self.session.commit() + self.cli_commit() conf.read(self._config_file) diff --git a/smoketest/scripts/cli/base_interfaces_test.py b/smoketest/scripts/cli/base_interfaces_test.py index d038e9cb8..f897088ef 100644 --- a/smoketest/scripts/cli/base_interfaces_test.py +++ b/smoketest/scripts/cli/base_interfaces_test.py @@ -22,6 +22,8 @@ from netifaces import AF_INET6 from netifaces import ifaddresses from netifaces import interfaces +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.ifconfig import Interface from vyos.ifconfig import Section @@ -29,7 +31,7 @@ from vyos.util import read_file from vyos.util import cmd from vyos.util import dict_search from vyos.util import process_named_running -from vyos.util import get_json_iface_options +from vyos.util import get_interface_config from vyos.validate import is_intf_addr_assigned from vyos.validate import is_ipv6_link_local @@ -52,7 +54,7 @@ def is_mirrored_to(interface, mirror_if, qdisc): return ret_val class BasicInterfaceTest: - class BaseTest(unittest.TestCase): + class TestCase(VyOSUnitTestSHIM.TestCase): _test_ip = False _test_mtu = False _test_vlan = False @@ -75,22 +77,19 @@ class BasicInterfaceTest: _mtu = '1280' def setUp(self): - self.session = ConfigSession(os.getpid()) - # Setup mirror interfaces for SPAN (Switch Port Analyzer) for span in self._mirror_interfaces: section = Section.section(span) - self.session.set(['interfaces', section, span]) + self.cli_set(['interfaces', section, span]) def tearDown(self): # Tear down mirror interfaces for SPAN (Switch Port Analyzer) for span in self._mirror_interfaces: section = Section.section(span) - self.session.delete(['interfaces', section, span]) + self.cli_delete(['interfaces', section, span]) - self.session.delete(self._base_path) - self.session.commit() - del self.session + self.cli_delete(self._base_path) + self.cli_commit() # Verify that no previously interface remained on the system for intf in self._interfaces: @@ -103,10 +102,10 @@ class BasicInterfaceTest: # Check the two-way mirror rules of ingress and egress for mirror in self._mirror_interfaces: for interface in self._interfaces: - self.session.set(self._base_path + [interface, 'mirror', 'ingress', mirror]) - self.session.set(self._base_path + [interface, 'mirror', 'egress', mirror]) + self.cli_set(self._base_path + [interface, 'mirror', 'ingress', mirror]) + self.cli_set(self._base_path + [interface, 'mirror', 'egress', mirror]) - self.session.commit() + self.cli_commit() # Verify config for mirror in self._mirror_interfaces: @@ -118,11 +117,11 @@ class BasicInterfaceTest: # Check if description can be added to interface and # can be read back for intf in self._interfaces: - self.session.set(self._base_path + [intf, 'disable']) + self.cli_set(self._base_path + [intf, 'disable']) for option in self._options.get(intf, []): - self.session.set(self._base_path + [intf] + option.split()) + self.cli_set(self._base_path + [intf] + option.split()) - self.session.commit() + self.cli_commit() # Validate interface description for intf in self._interfaces: @@ -133,11 +132,11 @@ class BasicInterfaceTest: # can be read back for intf in self._interfaces: test_string=f'Description-Test-{intf}' - self.session.set(self._base_path + [intf, 'description', test_string]) + self.cli_set(self._base_path + [intf, 'description', test_string]) for option in self._options.get(intf, []): - self.session.set(self._base_path + [intf] + option.split()) + self.cli_set(self._base_path + [intf] + option.split()) - self.session.commit() + self.cli_commit() # Validate interface description for intf in self._interfaces: @@ -145,9 +144,9 @@ class BasicInterfaceTest: tmp = read_file(f'/sys/class/net/{intf}/ifalias') self.assertEqual(tmp, test_string) self.assertEqual(Interface(intf).get_alias(), test_string) - self.session.delete(self._base_path + [intf, 'description']) + self.cli_delete(self._base_path + [intf, 'description']) - self.session.commit() + self.cli_commit() # Validate remove interface description "empty" for intf in self._interfaces: @@ -158,11 +157,11 @@ class BasicInterfaceTest: def test_add_single_ip_address(self): addr = '192.0.2.0/31' for intf in self._interfaces: - self.session.set(self._base_path + [intf, 'address', addr]) + self.cli_set(self._base_path + [intf, 'address', addr]) for option in self._options.get(intf, []): - self.session.set(self._base_path + [intf] + option.split()) + self.cli_set(self._base_path + [intf] + option.split()) - self.session.commit() + self.cli_commit() for intf in self._interfaces: self.assertTrue(is_intf_addr_assigned(intf, addr)) @@ -172,11 +171,11 @@ class BasicInterfaceTest: # Add address for intf in self._interfaces: for addr in self._test_addr: - self.session.set(self._base_path + [intf, 'address', addr]) + self.cli_set(self._base_path + [intf, 'address', addr]) for option in self._options.get(intf, []): - self.session.set(self._base_path + [intf] + option.split()) + self.cli_set(self._base_path + [intf] + option.split()) - self.session.commit() + self.cli_commit() # Validate address for intf in self._interfaces: @@ -196,10 +195,10 @@ class BasicInterfaceTest: for interface in self._interfaces: base = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(base + option.split()) + self.cli_set(base + option.split()) # after commit we must have an IPv6 link-local address - self.session.commit() + self.cli_commit() for interface in self._interfaces: for addr in ifaddresses(interface)[AF_INET6]: @@ -208,10 +207,10 @@ class BasicInterfaceTest: # disable IPv6 link-local address assignment for interface in self._interfaces: base = self._base_path + [interface] - self.session.set(base + ['ipv6', 'address', 'no-default-link-local']) + self.cli_set(base + ['ipv6', 'address', 'no-default-link-local']) # after commit we must have no IPv6 link-local address - self.session.commit() + self.cli_commit() for interface in self._interfaces: self.assertTrue(AF_INET6 not in ifaddresses(interface)) @@ -222,12 +221,12 @@ class BasicInterfaceTest: for intf in self._interfaces: base = self._base_path + [intf] - self.session.set(base + ['mtu', self._mtu]) + self.cli_set(base + ['mtu', self._mtu]) for option in self._options.get(intf, []): - self.session.set(base + option.split()) + self.cli_set(base + option.split()) # commit interface changes - self.session.commit() + self.cli_commit() # verify changed MTU for intf in self._interfaces: @@ -245,14 +244,14 @@ class BasicInterfaceTest: for intf in self._interfaces: base = self._base_path + [intf] - self.session.set(base + ['mtu', self._mtu]) - self.session.set(base + ['ipv6', 'address', 'no-default-link-local']) + self.cli_set(base + ['mtu', self._mtu]) + self.cli_set(base + ['ipv6', 'address', 'no-default-link-local']) for option in self._options.get(intf, []): - self.session.set(base + option.split()) + self.cli_set(base + option.split()) # commit interface changes - self.session.commit() + self.cli_commit() # verify changed MTU for intf in self._interfaces: @@ -272,15 +271,15 @@ class BasicInterfaceTest: for interface in self._interfaces: base = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(base + option.split()) + self.cli_set(base + option.split()) for vlan in self._vlan_range: base = self._base_path + [interface, 'vif', vlan] - self.session.set(base + ['mtu', self._mtu]) + self.cli_set(base + ['mtu', self._mtu]) for address in self._test_addr: - self.session.set(base + ['address', address]) + self.cli_set(base + ['address', address]) - self.session.commit() + self.cli_commit() for intf in self._interfaces: for vlan in self._vlan_range: @@ -300,24 +299,24 @@ class BasicInterfaceTest: for interface in self._interfaces: base = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(base + option.split()) + self.cli_set(base + option.split()) # disable the lower interface - self.session.set(base + ['disable']) + self.cli_set(base + ['disable']) for vlan in self._vlan_range: vlan_base = self._base_path + [interface, 'vif', vlan] # disable the vlan interface - self.session.set(vlan_base + ['disable']) + self.cli_set(vlan_base + ['disable']) - self.session.commit() + self.cli_commit() # re-enable all lower interfaces for interface in self._interfaces: base = self._base_path + [interface] - self.session.delete(base + ['disable']) + self.cli_delete(base + ['disable']) - self.session.commit() + self.cli_commit() # verify that the lower interfaces are admin up and the vlan # interfaces are all admin down @@ -340,20 +339,20 @@ class BasicInterfaceTest: for interface in self._interfaces: base = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(base + option.split()) + self.cli_set(base + option.split()) for vif_s in self._qinq_range: for vif_c in self._vlan_range: base = self._base_path + [interface, 'vif-s', vif_s, 'vif-c', vif_c] - self.session.set(base + ['mtu', self._mtu]) + self.cli_set(base + ['mtu', self._mtu]) for address in self._test_addr: - self.session.set(base + ['address', address]) + self.cli_set(base + ['address', address]) - self.session.commit() + self.cli_commit() for interface in self._interfaces: for vif_s in self._qinq_range: - tmp = get_json_iface_options(f'{interface}.{vif_s}') + tmp = get_interface_config(f'{interface}.{vif_s}') self.assertEqual(dict_search('linkinfo.info_data.protocol', tmp), '802.1ad') for vif_c in self._vlan_range: @@ -372,20 +371,20 @@ class BasicInterfaceTest: arp_tmo = '300' path = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(path + option.split()) + self.cli_set(path + option.split()) # Options - self.session.set(path + ['ip', 'arp-cache-timeout', arp_tmo]) - self.session.set(path + ['ip', 'disable-arp-filter']) - self.session.set(path + ['ip', 'disable-forwarding']) - self.session.set(path + ['ip', 'enable-arp-accept']) - self.session.set(path + ['ip', 'enable-arp-announce']) - self.session.set(path + ['ip', 'enable-arp-ignore']) - self.session.set(path + ['ip', 'enable-proxy-arp']) - self.session.set(path + ['ip', 'proxy-arp-pvlan']) - self.session.set(path + ['ip', 'source-validation', 'loose']) - - self.session.commit() + self.cli_set(path + ['ip', 'arp-cache-timeout', arp_tmo]) + self.cli_set(path + ['ip', 'disable-arp-filter']) + self.cli_set(path + ['ip', 'disable-forwarding']) + self.cli_set(path + ['ip', 'enable-arp-accept']) + self.cli_set(path + ['ip', 'enable-arp-announce']) + self.cli_set(path + ['ip', 'enable-arp-ignore']) + self.cli_set(path + ['ip', 'enable-proxy-arp']) + self.cli_set(path + ['ip', 'proxy-arp-pvlan']) + self.cli_set(path + ['ip', 'source-validation', 'loose']) + + self.cli_commit() for interface in self._interfaces: tmp = read_file(f'/proc/sys/net/ipv4/neigh/{interface}/base_reachable_time_ms') @@ -423,13 +422,13 @@ class BasicInterfaceTest: dad_transmits = '10' path = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(path + option.split()) + self.cli_set(path + option.split()) # Options - self.session.set(path + ['ipv6', 'disable-forwarding']) - self.session.set(path + ['ipv6', 'dup-addr-detect-transmits', dad_transmits]) + self.cli_set(path + ['ipv6', 'disable-forwarding']) + self.cli_set(path + ['ipv6', 'dup-addr-detect-transmits', dad_transmits]) - self.session.commit() + self.cli_commit() for interface in self._interfaces: tmp = read_file(f'/proc/sys/net/ipv6/conf/{interface}/forwarding') @@ -447,16 +446,16 @@ class BasicInterfaceTest: duid = '00:01:00:01:27:71:db:f0:00:50:00:00:00:{}'.format(duid_base) path = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(path + option.split()) + self.cli_set(path + option.split()) # Enable DHCPv6 client - self.session.set(path + ['address', 'dhcpv6']) - self.session.set(path + ['dhcpv6-options', 'rapid-commit']) - self.session.set(path + ['dhcpv6-options', 'parameters-only']) - self.session.set(path + ['dhcpv6-options', 'duid', duid]) + self.cli_set(path + ['address', 'dhcpv6']) + self.cli_set(path + ['dhcpv6-options', 'rapid-commit']) + self.cli_set(path + ['dhcpv6-options', 'parameters-only']) + self.cli_set(path + ['dhcpv6-options', 'duid', duid]) duid_base += 1 - self.session.commit() + self.cli_commit() duid_base = 10 for interface in self._interfaces: @@ -487,21 +486,21 @@ class BasicInterfaceTest: for interface in self._interfaces: path = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(path + option.split()) + self.cli_set(path + option.split()) address = '1' # prefix delegation stuff pd_base = path + ['dhcpv6-options', 'pd', '0'] - self.session.set(pd_base + ['length', prefix_len]) + self.cli_set(pd_base + ['length', prefix_len]) for delegatee in delegatees: section = Section.section(delegatee) - self.session.set(['interfaces', section, delegatee]) - self.session.set(pd_base + ['interface', delegatee, 'address', address]) + self.cli_set(['interfaces', section, delegatee]) + self.cli_set(pd_base + ['interface', delegatee, 'address', address]) # increment interface address address = str(int(address) + 1) - self.session.commit() + self.cli_commit() for interface in self._interfaces: dhcpc6_config = read_file(f'/run/dhcp6c/dhcp6c.{interface}.conf') @@ -529,7 +528,7 @@ class BasicInterfaceTest: # we can already cleanup the test delegatee interface here # as until commit() is called, nothing happens section = Section.section(delegatee) - self.session.delete(['interfaces', section, delegatee]) + self.cli_delete(['interfaces', section, delegatee]) def test_dhcpv6pd_manual_sla_id(self): if not self._test_ipv6_pd: @@ -543,25 +542,25 @@ class BasicInterfaceTest: for interface in self._interfaces: path = self._base_path + [interface] for option in self._options.get(interface, []): - self.session.set(path + option.split()) + self.cli_set(path + option.split()) # prefix delegation stuff address = '1' sla_id = '1' pd_base = path + ['dhcpv6-options', 'pd', '0'] - self.session.set(pd_base + ['length', prefix_len]) + self.cli_set(pd_base + ['length', prefix_len]) for delegatee in delegatees: section = Section.section(delegatee) - self.session.set(['interfaces', section, delegatee]) - self.session.set(pd_base + ['interface', delegatee, 'address', address]) - self.session.set(pd_base + ['interface', delegatee, 'sla-id', sla_id]) + self.cli_set(['interfaces', section, delegatee]) + self.cli_set(pd_base + ['interface', delegatee, 'address', address]) + self.cli_set(pd_base + ['interface', delegatee, 'sla-id', sla_id]) # increment interface address address = str(int(address) + 1) sla_id = str(int(sla_id) + 1) - self.session.commit() + self.cli_commit() # Verify dhcpc6 client configuration for interface in self._interfaces: @@ -590,4 +589,4 @@ class BasicInterfaceTest: # we can already cleanup the test delegatee interface here # as until commit() is called, nothing happens section = Section.section(delegatee) - self.session.delete(['interfaces', section, delegatee]) + self.cli_delete(['interfaces', section, delegatee]) diff --git a/smoketest/scripts/cli/base_vyostest_shim.py b/smoketest/scripts/cli/base_vyostest_shim.py new file mode 100644 index 000000000..18e4e567e --- /dev/null +++ b/smoketest/scripts/cli/base_vyostest_shim.py @@ -0,0 +1,90 @@ +# Copyright (C) 2021 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import os +import unittest + +from time import sleep + +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError +from vyos import ConfigError +from vyos.util import cmd + +save_config = '/tmp/vyos-smoketest-save' + +# This class acts as shim between individual Smoketests developed for VyOS and +# the Python UnitTest framework. Before every test is loaded, we dump the current +# system configuration and reload it after the test - despite the test results. +# +# Using this approach we can not render a live system useless while running any +# kind of smoketest. In addition it adds debug capabilities like printing the +# command used to execute the test. +class VyOSUnitTestSHIM: + class TestCase(unittest.TestCase): + # if enabled in derived class, print out each and every set/del command + # on the CLI. This is usefull to grap all the commands required to + # trigger the certain failure condition. + # Use "self.debug = True" in derived classes setUp() method + debug = False + + @classmethod + def setUpClass(cls): + cls._session = ConfigSession(os.getpid()) + cls._session.save_config(save_config) + pass + + @classmethod + def tearDownClass(cls): + # discard any pending changes which might caused a messed up config + cls._session.discard() + # ... and restore the initial state + cls._session.migrate_and_load_config(save_config) + + try: + cls._session.commit() + except (ConfigError, ConfigSessionError): + cls._session.discard() + cls.fail(cls) + + def cli_set(self, config): + if self.debug: + print('set ' + ' '.join(config)) + self._session.set(config) + + def cli_delete(self, config): + if self.debug: + print('del ' + ' '.join(config)) + self._session.delete(config) + + def cli_commit(self): + self._session.commit() + + def getFRRconfig(self, string, end='$'): + """ Retrieve current "running configuration" from FRR """ + command = f'vtysh -c "show run" | sed -n "/^{string}{end}/,/^!/p"' + + count = 0 + tmp = '' + while count < 10 and tmp == '': + # Let FRR settle after a config change first before harassing it again + sleep(1) + tmp = cmd(command) + count += 1 + + if self.debug or tmp == '': + import pprint + print(f'\n\ncommand "{command}" returned:\n') + pprint.pprint(tmp) + return tmp diff --git a/smoketest/scripts/cli/test_interfaces_bonding.py b/smoketest/scripts/cli/test_interfaces_bonding.py index b65d97d30..03cdafb8d 100755 --- a/smoketest/scripts/cli/test_interfaces_bonding.py +++ b/smoketest/scripts/cli/test_interfaces_bonding.py @@ -24,7 +24,7 @@ from vyos.ifconfig.interface import Interface from vyos.configsession import ConfigSessionError from vyos.util import read_file -class BondingInterfaceTest(BasicInterfaceTest.BaseTest): +class BondingInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -52,6 +52,9 @@ class BondingInterfaceTest(BasicInterfaceTest.BaseTest): for member in cls._members: cls._options['bond0'].append(f'member interface {member}') + # call base-classes classmethod + super(cls, cls).setUpClass() + def test_add_single_ip_address(self): super().test_add_single_ip_address() @@ -74,16 +77,16 @@ class BondingInterfaceTest(BasicInterfaceTest.BaseTest): # configure member interfaces for interface in self._interfaces: for option in self._options.get(interface, []): - self.session.set(self._base_path + [interface] + option.split()) + self.cli_set(self._base_path + [interface] + option.split()) - self.session.commit() + self.cli_commit() # remove single bond member port for interface in self._interfaces: remove_member = self._members[0] - self.session.delete(self._base_path + [interface, 'member', 'interface', remove_member]) + self.cli_delete(self._base_path + [interface, 'member', 'interface', remove_member]) - self.session.commit() + self.cli_commit() # removed member port must be admin-up for interface in self._interfaces: diff --git a/smoketest/scripts/cli/test_interfaces_bridge.py b/smoketest/scripts/cli/test_interfaces_bridge.py index 7e10f12c4..21f20c781 100755 --- a/smoketest/scripts/cli/test_interfaces_bridge.py +++ b/smoketest/scripts/cli/test_interfaces_bridge.py @@ -25,9 +25,10 @@ from netifaces import interfaces from vyos.ifconfig import Section from vyos.util import cmd from vyos.util import read_file +from vyos.util import get_interface_config from vyos.validate import is_intf_addr_assigned -class BridgeInterfaceTest(BasicInterfaceTest.BaseTest): +class BridgeInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -53,68 +54,97 @@ class BridgeInterfaceTest(BasicInterfaceTest.BaseTest): cls._options['br0'].append(f'member interface {member}') cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() + def tearDown(self): for intf in self._interfaces: - self.session.delete(self._base_path + [intf]) + self.cli_delete(self._base_path + [intf]) super().tearDown() + def test_isolated_interfaces(self): + # Add member interfaces to bridge and set STP cost/priority + for interface in self._interfaces: + base = self._base_path + [interface] + self.cli_set(base + ['stp']) + + # assign members to bridge interface + for member in self._members: + base_member = base + ['member', 'interface', member] + self.cli_set(base_member + ['isolated']) + + # commit config + self.cli_commit() + + for interface in self._interfaces: + tmp = get_interface_config(interface) + # STP must be enabled as configured above + self.assertEqual(1, tmp['linkinfo']['info_data']['stp_state']) + + # validate member interface configuration + for member in self._members: + tmp = get_interface_config(member) + # Isolated must be enabled as configured above + self.assertTrue(tmp['linkinfo']['info_slave_data']['isolated']) + + def test_add_remove_bridge_member(self): # Add member interfaces to bridge and set STP cost/priority for interface in self._interfaces: base = self._base_path + [interface] - self.session.set(base + ['stp']) - self.session.set(base + ['address', '192.0.2.1/24']) + self.cli_set(base + ['stp']) + self.cli_set(base + ['address', '192.0.2.1/24']) cost = 1000 priority = 10 # assign members to bridge interface for member in self._members: base_member = base + ['member', 'interface', member] - self.session.set(base_member + ['cost', str(cost)]) - self.session.set(base_member + ['priority', str(priority)]) + self.cli_set(base_member + ['cost', str(cost)]) + self.cli_set(base_member + ['priority', str(priority)]) cost += 1 priority += 1 # commit config - self.session.commit() - - # check member interfaces are added on the bridge - bridge_members = [] - for tmp in glob(f'/sys/class/net/{interface}/lower_*'): - bridge_members.append(os.path.basename(tmp).replace('lower_', '')) - - for member in self._members: - self.assertIn(member, bridge_members) + self.cli_commit() - # delete all members + # Add member interfaces to bridge and set STP cost/priority for interface in self._interfaces: - self.session.delete(self._base_path + [interface, 'member']) + cost = 1000 + priority = 10 + for member in self._members: + tmp = get_interface_config(member) + self.assertEqual(interface, tmp['master']) + self.assertFalse( tmp['linkinfo']['info_slave_data']['isolated']) + self.assertEqual(cost, tmp['linkinfo']['info_slave_data']['cost']) + self.assertEqual(priority, tmp['linkinfo']['info_slave_data']['priority']) + + cost += 1 + priority += 1 - self.session.commit() def test_vif_8021q_interfaces(self): for interface in self._interfaces: base = self._base_path + [interface] - self.session.set(base + ['enable-vlan']) + self.cli_set(base + ['enable-vlan']) super().test_vif_8021q_interfaces() def test_vif_8021q_lower_up_down(self): for interface in self._interfaces: base = self._base_path + [interface] - self.session.set(base + ['enable-vlan']) + self.cli_set(base + ['enable-vlan']) super().test_vif_8021q_interfaces() def test_bridge_vlan_filter(self): - vif_vlan = 2 # Add member interface to bridge and set VLAN filter for interface in self._interfaces: base = self._base_path + [interface] - self.session.set(base + ['enable-vlan']) - self.session.set(base + ['address', '192.0.2.1/24']) - self.session.set(base + ['vif', str(vif_vlan), 'address', '192.0.3.1/24']) - self.session.set(base + ['vif', str(vif_vlan), 'mtu', self._mtu]) + self.cli_set(base + ['enable-vlan']) + self.cli_set(base + ['address', '192.0.2.1/24']) + self.cli_set(base + ['vif', str(vif_vlan), 'address', '192.0.3.1/24']) + self.cli_set(base + ['vif', str(vif_vlan), 'mtu', self._mtu]) vlan_id = 101 allowed_vlan = 2 @@ -122,13 +152,13 @@ class BridgeInterfaceTest(BasicInterfaceTest.BaseTest): # assign members to bridge interface for member in self._members: base_member = base + ['member', 'interface', member] - self.session.set(base_member + ['allowed-vlan', str(allowed_vlan)]) - self.session.set(base_member + ['allowed-vlan', allowed_vlan_range]) - self.session.set(base_member + ['native-vlan', str(vlan_id)]) + self.cli_set(base_member + ['allowed-vlan', str(allowed_vlan)]) + self.cli_set(base_member + ['allowed-vlan', allowed_vlan_range]) + self.cli_set(base_member + ['native-vlan', str(vlan_id)]) vlan_id += 1 # commit config - self.session.commit() + self.cli_commit() # Detect the vlan filter function for interface in self._interfaces: @@ -184,7 +214,7 @@ class BridgeInterfaceTest(BasicInterfaceTest.BaseTest): # delete all members for interface in self._interfaces: - self.session.delete(self._base_path + [interface, 'member']) + self.cli_delete(self._base_path + [interface, 'member']) def test_bridge_vlan_members(self): @@ -193,10 +223,10 @@ class BridgeInterfaceTest(BasicInterfaceTest.BaseTest): for interface in self._interfaces: for member in self._members: for vif in vifs: - self.session.set(['interfaces', 'ethernet', member, 'vif', vif]) - self.session.set(['interfaces', 'bridge', interface, 'member', 'interface', f'{member}.{vif}']) + self.cli_set(['interfaces', 'ethernet', member, 'vif', vif]) + self.cli_set(['interfaces', 'bridge', interface, 'member', 'interface', f'{member}.{vif}']) - self.session.commit() + self.cli_commit() # Verify config for interface in self._interfaces: @@ -209,9 +239,8 @@ class BridgeInterfaceTest(BasicInterfaceTest.BaseTest): for interface in self._interfaces: for member in self._members: for vif in vifs: - self.session.delete(['interfaces', 'ethernet', member, 'vif', vif]) - self.session.delete(['interfaces', 'bridge', interface, 'member', 'interface', f'{member}.{vif}']) + self.cli_delete(['interfaces', 'ethernet', member, 'vif', vif]) + self.cli_delete(['interfaces', 'bridge', interface, 'member', 'interface', f'{member}.{vif}']) if __name__ == '__main__': unittest.main(verbosity=2) - diff --git a/smoketest/scripts/cli/test_interfaces_dummy.py b/smoketest/scripts/cli/test_interfaces_dummy.py index 6e462bccf..dedc6fe05 100755 --- a/smoketest/scripts/cli/test_interfaces_dummy.py +++ b/smoketest/scripts/cli/test_interfaces_dummy.py @@ -18,11 +18,13 @@ import unittest from base_interfaces_test import BasicInterfaceTest -class DummyInterfaceTest(BasicInterfaceTest.BaseTest): +class DummyInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._base_path = ['interfaces', 'dummy'] cls._interfaces = ['dum435', 'dum8677', 'dum0931', 'dum089'] + # call base-classes classmethod + super(cls, cls).setUpClass() if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_interfaces_erspan.py b/smoketest/scripts/cli/test_interfaces_erspan.py deleted file mode 100755 index cbb41d0c9..000000000 --- a/smoketest/scripts/cli/test_interfaces_erspan.py +++ /dev/null @@ -1,85 +0,0 @@ -#!/usr/bin/env python3 -# -# Copyright (C) 2020-2021 VyOS maintainers and contributors -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 or later as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -import unittest - -from vyos.configsession import ConfigSession -from vyos.configsession import ConfigSessionError -from vyos.util import get_json_iface_options - -from base_interfaces_test import BasicInterfaceTest - -mtu = 1500 - -class ERSPanTunnelInterfaceTest(BasicInterfaceTest.BaseTest): - def setUp(self): - super().setUp() - - self._base_path = ['interfaces', 'erspan'] - self._test_mtu = True - - self.local_v4 = '10.1.1.1' - self.local_v6 = '2001:db8::1' - self.remote_v4 = '10.2.2.2' - self.remote_v6 = '2001:db9::1' - - def tearDown(self): - self.session.delete(['interfaces', 'erspan']) - super().tearDown() - - def test_erspan_ipv4(self): - interface = 'ersp100' - encapsulation = 'erspan' - key = 123 - - self.session.set(self._base_path + [interface, 'encapsulation', encapsulation]) - self.session.set(self._base_path + [interface, 'source-address', self.local_v4]) - self.session.set(self._base_path + [interface, 'remote', self.remote_v4]) - self.session.set(self._base_path + [interface, 'parameters', 'ip' , 'key', str(key)]) - - self.session.commit() - - conf = get_json_iface_options(interface) - self.assertEqual(interface, conf['ifname']) - self.assertEqual(encapsulation, conf['linkinfo']['info_kind']) - self.assertEqual(mtu, conf['mtu']) - - self.assertEqual(self.local_v4, conf['linkinfo']['info_data']['local']) - self.assertEqual(self.remote_v4, conf['linkinfo']['info_data']['remote']) - - - def test_erspan_ipv6(self): - interface = 'ersp1000' - encapsulation = 'ip6erspan' - key = 123 - - self.session.set(self._base_path + [interface, 'encapsulation', encapsulation]) - self.session.set(self._base_path + [interface, 'source-address', self.local_v6]) - self.session.set(self._base_path + [interface, 'remote', self.remote_v6]) - self.session.set(self._base_path + [interface, 'parameters', 'ip' , 'key', str(key)]) - - self.session.commit() - - conf = get_json_iface_options(interface) - self.assertEqual(interface, conf['ifname']) - self.assertEqual(encapsulation, conf['linkinfo']['info_kind']) - self.assertEqual(mtu, conf['mtu']) - - self.assertEqual(self.local_v6, conf['linkinfo']['info_data']['local']) - self.assertEqual(self.remote_v6, conf['linkinfo']['info_data']['remote']) - -if __name__ == '__main__': - unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_interfaces_ethernet.py b/smoketest/scripts/cli/test_interfaces_ethernet.py index 772ff248f..cb0c8a426 100755 --- a/smoketest/scripts/cli/test_interfaces_ethernet.py +++ b/smoketest/scripts/cli/test_interfaces_ethernet.py @@ -34,7 +34,7 @@ def get_wpa_supplicant_value(interface, key): tmp = re.findall(r'\n?{}=(.*)'.format(key), tmp) return tmp[0] -class EthernetInterfaceTest(BasicInterfaceTest.BaseTest): +class EthernetInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -61,37 +61,39 @@ class EthernetInterfaceTest(BasicInterfaceTest.BaseTest): for interface in cls._interfaces: cls._macs[interface] = read_file(f'/sys/class/net/{interface}/address') + # call base-classes classmethod + super(cls, cls).setUpClass() + def tearDown(self): for interface in self._interfaces: # when using a dedicated interface to test via TEST_ETH environment # variable only this one will be cleared in the end - usable to test # ethernet interfaces via SSH - self.session.delete(self._base_path + [interface]) - self.session.set(self._base_path + [interface, 'duplex', 'auto']) - self.session.set(self._base_path + [interface, 'speed', 'auto']) - self.session.set(self._base_path + [interface, 'hw-id', self._macs[interface]]) + self.cli_delete(self._base_path + [interface]) + self.cli_set(self._base_path + [interface, 'duplex', 'auto']) + self.cli_set(self._base_path + [interface, 'speed', 'auto']) + self.cli_set(self._base_path + [interface, 'hw-id', self._macs[interface]]) # Tear down mirror interfaces for SPAN (Switch Port Analyzer) for span in self._mirror_interfaces: section = Section.section(span) - self.session.delete(['interfaces', section, span]) + self.cli_delete(['interfaces', section, span]) - self.session.commit() - del self.session + self.cli_commit() def test_dhcp_disable_interface(self): # When interface is configured as admin down, it must be admin down # even when dhcpc starts on the given interface for interface in self._interfaces: - self.session.set(self._base_path + [interface, 'disable']) + self.cli_set(self._base_path + [interface, 'disable']) # Also enable DHCP (ISC DHCP always places interface in admin up # state so we check that we do not start DHCP client. # https://phabricator.vyos.net/T2767 - self.session.set(self._base_path + [interface, 'address', 'dhcp']) + self.cli_set(self._base_path + [interface, 'address', 'dhcp']) - self.session.commit() + self.cli_commit() # Validate interface state for interface in self._interfaces: @@ -111,9 +113,9 @@ class EthernetInterfaceTest(BasicInterfaceTest.BaseTest): rps_cpus &= ~1 for interface in self._interfaces: - self.session.set(self._base_path + [interface, 'offload', 'rps']) + self.cli_set(self._base_path + [interface, 'offload', 'rps']) - self.session.commit() + self.cli_commit() for interface in self._interfaces: cpus = read_file('/sys/class/net/eth1/queues/rx-0/rps_cpus') @@ -125,35 +127,35 @@ class EthernetInterfaceTest(BasicInterfaceTest.BaseTest): def test_non_existing_interface(self): unknonw_interface = self._base_path + ['eth667'] - self.session.set(unknonw_interface) + self.cli_set(unknonw_interface) # check validate() - interface does not exist with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() # we need to remove this wrong interface from the configuration # manually, else tearDown() will have problem in commit() - self.session.delete(unknonw_interface) + self.cli_delete(unknonw_interface) def test_speed_duplex_verify(self): for interface in self._interfaces: - self.session.set(self._base_path + [interface, 'speed', '1000']) + self.cli_set(self._base_path + [interface, 'speed', '1000']) # check validate() - if either speed or duplex is not auto, the # other one must be manually configured, too with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'speed', 'auto']) - self.session.commit() + self.cli_commit() + self.cli_set(self._base_path + [interface, 'speed', 'auto']) + self.cli_commit() def test_eapol_support(self): for interface in self._interfaces: # Enable EAPoL - self.session.set(self._base_path + [interface, 'eapol', 'ca-cert-file', ca_cert]) - self.session.set(self._base_path + [interface, 'eapol', 'cert-file', ssl_cert]) - self.session.set(self._base_path + [interface, 'eapol', 'key-file', ssl_key]) + self.cli_set(self._base_path + [interface, 'eapol', 'ca-cert-file', ca_cert]) + self.cli_set(self._base_path + [interface, 'eapol', 'cert-file', ssl_cert]) + self.cli_set(self._base_path + [interface, 'eapol', 'key-file', ssl_key]) - self.session.commit() + self.cli_commit() # Check for running process self.assertTrue(process_named_running('wpa_supplicant')) diff --git a/smoketest/scripts/cli/test_interfaces_geneve.py b/smoketest/scripts/cli/test_interfaces_geneve.py index 7edd4528e..129ee71e5 100755 --- a/smoketest/scripts/cli/test_interfaces_geneve.py +++ b/smoketest/scripts/cli/test_interfaces_geneve.py @@ -18,11 +18,11 @@ import unittest from vyos.configsession import ConfigSession from vyos.ifconfig import Interface -from vyos.util import get_json_iface_options +from vyos.util import get_interface_config from base_interfaces_test import BasicInterfaceTest -class GeneveInterfaceTest(BasicInterfaceTest.BaseTest): +class GeneveInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -34,24 +34,26 @@ class GeneveInterfaceTest(BasicInterfaceTest.BaseTest): 'gnv1': ['vni 30', 'remote 2001:db8::1', 'parameters ipv6 flowlabel 0x1000'], } cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() def test_geneve_parameters(self): tos = '40' ttl = 20 for intf in self._interfaces: for option in self._options.get(intf, []): - self.session.set(self._base_path + [intf] + option.split()) + self.cli_set(self._base_path + [intf] + option.split()) - self.session.set(self._base_path + [intf, 'parameters', 'ip', 'dont-fragment']) - self.session.set(self._base_path + [intf, 'parameters', 'ip', 'tos', tos]) - self.session.set(self._base_path + [intf, 'parameters', 'ip', 'ttl', str(ttl)]) + self.cli_set(self._base_path + [intf, 'parameters', 'ip', 'dont-fragment']) + self.cli_set(self._base_path + [intf, 'parameters', 'ip', 'tos', tos]) + self.cli_set(self._base_path + [intf, 'parameters', 'ip', 'ttl', str(ttl)]) ttl += 10 - self.session.commit() + self.cli_commit() ttl = 20 for interface in self._interfaces: - options = get_json_iface_options(interface) + options = get_interface_config(interface) vni = options['linkinfo']['info_data']['id'] self.assertIn(f'vni {vni}', self._options[interface]) diff --git a/smoketest/scripts/cli/test_interfaces_l2tpv3.py b/smoketest/scripts/cli/test_interfaces_l2tpv3.py index 74fd4f6c6..24cb9464e 100755 --- a/smoketest/scripts/cli/test_interfaces_l2tpv3.py +++ b/smoketest/scripts/cli/test_interfaces_l2tpv3.py @@ -20,7 +20,7 @@ import unittest from base_interfaces_test import BasicInterfaceTest from vyos.util import cmd -class GeneveInterfaceTest(BasicInterfaceTest.BaseTest): +class GeneveInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -37,6 +37,8 @@ class GeneveInterfaceTest(BasicInterfaceTest.BaseTest): 'source-port 2020', 'destination-port 20202'], } cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() def test_add_single_ip_address(self): super().test_add_single_ip_address() diff --git a/smoketest/scripts/cli/test_interfaces_loopback.py b/smoketest/scripts/cli/test_interfaces_loopback.py index 77dd4c1b5..85b5ca6d6 100755 --- a/smoketest/scripts/cli/test_interfaces_loopback.py +++ b/smoketest/scripts/cli/test_interfaces_loopback.py @@ -23,16 +23,17 @@ from vyos.validate import is_intf_addr_assigned loopbacks = ['127.0.0.1', '::1'] -class LoopbackInterfaceTest(BasicInterfaceTest.BaseTest): +class LoopbackInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): - cls._base_path = ['interfaces', 'loopback'] - cls._interfaces = ['lo'] + cls._base_path = ['interfaces', 'loopback'] + cls._interfaces = ['lo'] + # call base-classes classmethod + super(cls, cls).setUpClass() def tearDown(self): - self.session.delete(self._base_path) - self.session.commit() - del self.session + self.cli_delete(self._base_path) + self.cli_commit() # loopback interface must persist! for intf in self._interfaces: diff --git a/smoketest/scripts/cli/test_interfaces_macsec.py b/smoketest/scripts/cli/test_interfaces_macsec.py index 2f1898b6f..e4280a5b7 100755 --- a/smoketest/scripts/cli/test_interfaces_macsec.py +++ b/smoketest/scripts/cli/test_interfaces_macsec.py @@ -25,7 +25,7 @@ from vyos.configsession import ConfigSessionError from vyos.ifconfig import Section from vyos.util import cmd from vyos.util import read_file -from vyos.util import get_json_iface_options +from vyos.util import get_interface_config from vyos.util import process_named_running def get_config_value(interface, key): @@ -34,23 +34,25 @@ def get_config_value(interface, key): return tmp[0] def get_cipher(interface): - tmp = get_json_iface_options(interface) + tmp = get_interface_config(interface) return tmp['linkinfo']['info_data']['cipher_suite'].lower() -class MACsecInterfaceTest(BasicInterfaceTest.BaseTest): +class MACsecInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): - cls._test_ip = True - cls._test_ipv6 = True - cls._base_path = ['interfaces', 'macsec'] - cls._options = { 'macsec0': ['source-interface eth0', 'security cipher gcm-aes-128'] } + cls._test_ip = True + cls._test_ipv6 = True + cls._base_path = ['interfaces', 'macsec'] + cls._options = { 'macsec0': ['source-interface eth0', 'security cipher gcm-aes-128'] } - # if we have a physical eth1 interface, add a second macsec instance - if 'eth1' in Section.interfaces('ethernet'): - macsec = { 'macsec1': [f'source-interface eth1', 'security cipher gcm-aes-128'] } - cls._options.update(macsec) + # if we have a physical eth1 interface, add a second macsec instance + if 'eth1' in Section.interfaces('ethernet'): + macsec = { 'macsec1': [f'source-interface eth1', 'security cipher gcm-aes-128'] } + cls._options.update(macsec) - cls._interfaces = list(cls._options) + cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() def test_macsec_encryption(self): # MACsec can be operating in authentication and encryption mode - both @@ -66,31 +68,31 @@ class MACsecInterfaceTest(BasicInterfaceTest.BaseTest): if option.split()[0] == 'source-interface': src_interface = option.split()[1] - self.session.set(self._base_path + [interface] + option.split()) + self.cli_set(self._base_path + [interface] + option.split()) # Encrypt link - self.session.set(self._base_path + [interface, 'security', 'encrypt']) + self.cli_set(self._base_path + [interface, 'security', 'encrypt']) # check validate() - Physical source interface MTU must be higher then our MTU - self.session.set(self._base_path + [interface, 'mtu', '1500']) + self.cli_set(self._base_path + [interface, 'mtu', '1500']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(self._base_path + [interface, 'mtu']) + self.cli_commit() + self.cli_delete(self._base_path + [interface, 'mtu']) # check validate() - MACsec security keys mandartory when encryption is enabled with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'security', 'mka', 'cak', mak_cak]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'security', 'mka', 'cak', mak_cak]) # check validate() - MACsec security keys mandartory when encryption is enabled with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'security', 'mka', 'ckn', mak_ckn]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'security', 'mka', 'ckn', mak_ckn]) - self.session.set(self._base_path + [interface, 'security', 'replay-window', replay_window]) + self.cli_set(self._base_path + [interface, 'security', 'replay-window', replay_window]) # final commit of settings - self.session.commit() + self.cli_commit() tmp = get_config_value(src_interface, 'macsec_integ_only') self.assertTrue("0" in tmp) @@ -117,20 +119,20 @@ class MACsecInterfaceTest(BasicInterfaceTest.BaseTest): def test_macsec_gcm_aes_128(self): interface = 'macsec1' cipher = 'gcm-aes-128' - self.session.set(self._base_path + [interface]) + self.cli_set(self._base_path + [interface]) # check validate() - source interface is mandatory with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'source-interface', 'eth0']) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'source-interface', 'eth0']) # check validate() - cipher is mandatory with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'security', 'cipher', cipher]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'security', 'cipher', cipher]) # final commit and verify - self.session.commit() + self.cli_commit() self.assertIn(interface, interfaces()) self.assertIn(interface, interfaces()) self.assertEqual(cipher, get_cipher(interface)) @@ -138,20 +140,20 @@ class MACsecInterfaceTest(BasicInterfaceTest.BaseTest): def test_macsec_gcm_aes_256(self): interface = 'macsec4' cipher = 'gcm-aes-256' - self.session.set(self._base_path + [interface]) + self.cli_set(self._base_path + [interface]) # check validate() - source interface is mandatory with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'source-interface', 'eth0']) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'source-interface', 'eth0']) # check validate() - cipher is mandatory with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'security', 'cipher', cipher]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'security', 'cipher', cipher]) # final commit and verify - self.session.commit() + self.cli_commit() self.assertIn(interface, interfaces()) self.assertEqual(cipher, get_cipher(interface)) @@ -163,24 +165,24 @@ class MACsecInterfaceTest(BasicInterfaceTest.BaseTest): for interface, option_value in self._options.items(): for option in option_value: - self.session.set(self._base_path + [interface] + option.split()) + self.cli_set(self._base_path + [interface] + option.split()) if option.split()[0] == 'source-interface': src_interface = option.split()[1] - self.session.set(base_bridge + ['member', 'interface', src_interface]) + self.cli_set(base_bridge + ['member', 'interface', src_interface]) # check validate() - Source interface must not already be a member of a bridge with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(base_bridge) + self.cli_commit() + self.cli_delete(base_bridge) - self.session.set(base_bond + ['member', 'interface', src_interface]) + self.cli_set(base_bond + ['member', 'interface', src_interface]) # check validate() - Source interface must not already be a member of a bridge with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(base_bond) + self.cli_commit() + self.cli_delete(base_bond) # final commit and verify - self.session.commit() + self.cli_commit() self.assertIn(interface, interfaces()) if __name__ == '__main__': diff --git a/smoketest/scripts/cli/test_interfaces_openvpn.py b/smoketest/scripts/cli/test_interfaces_openvpn.py index a2a1a85ec..655ee770d 100755 --- a/smoketest/scripts/cli/test_interfaces_openvpn.py +++ b/smoketest/scripts/cli/test_interfaces_openvpn.py @@ -21,6 +21,8 @@ from glob import glob from ipaddress import IPv4Network from netifaces import interfaces +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.util import cmd @@ -58,85 +60,83 @@ def get_vrf(interface): tmp = tmp.replace('upper_', '') return tmp -class TestInterfacesOpenVPN(unittest.TestCase): +class TestInterfacesOpenVPN(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(['interfaces', 'dummy', dummy_if, 'address', '192.0.2.1/32']) - self.session.set(['vrf', 'name', vrf_name, 'table', '12345']) + self.cli_set(['interfaces', 'dummy', dummy_if, 'address', '192.0.2.1/32']) + self.cli_set(['vrf', 'name', vrf_name, 'table', '12345']) def tearDown(self): - self.session.delete(base_path) - self.session.delete(['interfaces', 'dummy', dummy_if]) - self.session.delete(['vrf']) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_delete(['interfaces', 'dummy', dummy_if]) + self.cli_delete(['vrf']) + self.cli_commit() def test_openvpn_client_verify(self): # Create OpenVPN client interface and test verify() steps. interface = 'vtun2000' path = base_path + [interface] - self.session.set(path + ['mode', 'client']) + self.cli_set(path + ['mode', 'client']) # check validate() - cannot specify both "encryption disable-ncp" and # "encryption ncp-ciphers" at the same time - self.session.set(path + ['encryption', 'disable-ncp']) - self.session.set(path + ['encryption', 'ncp-ciphers', 'aes192gcm']) + self.cli_set(path + ['encryption', 'disable-ncp']) + self.cli_set(path + ['encryption', 'ncp-ciphers', 'aes192gcm']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['encryption', 'ncp-ciphers']) + self.cli_commit() + self.cli_delete(path + ['encryption', 'ncp-ciphers']) # check validate() - cannot specify local-port in client mode - self.session.set(path + ['local-port', '5000']) + self.cli_set(path + ['local-port', '5000']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['local-port']) + self.cli_commit() + self.cli_delete(path + ['local-port']) # check validate() - cannot specify local-host in client mode - self.session.set(path + ['local-host', '127.0.0.1']) + self.cli_set(path + ['local-host', '127.0.0.1']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['local-host']) + self.cli_commit() + self.cli_delete(path + ['local-host']) # check validate() - cannot specify protocol tcp-passive in client mode - self.session.set(path + ['protocol', 'tcp-passive']) + self.cli_set(path + ['protocol', 'tcp-passive']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['protocol']) + self.cli_commit() + self.cli_delete(path + ['protocol']) # check validate() - remote-host must be set in client mode with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['remote-host', '192.0.9.9']) + self.cli_commit() + self.cli_set(path + ['remote-host', '192.0.9.9']) # check validate() - cannot specify "tls dh-file" in client mode - self.session.set(path + ['tls', 'dh-file', dh_pem]) + self.cli_set(path + ['tls', 'dh-file', dh_pem]) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['tls']) + self.cli_commit() + self.cli_delete(path + ['tls']) # check validate() - must specify one of "shared-secret-key-file" and "tls" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['shared-secret-key-file', s2s_key]) + self.cli_commit() + self.cli_set(path + ['shared-secret-key-file', s2s_key]) # check validate() - must specify one of "shared-secret-key-file" and "tls" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['shared-secret-key-file', s2s_key]) + self.cli_commit() + self.cli_delete(path + ['shared-secret-key-file', s2s_key]) - self.session.set(path + ['tls', 'ca-cert-file', ca_cert]) - self.session.set(path + ['tls', 'cert-file', ssl_cert]) - self.session.set(path + ['tls', 'key-file', ssl_key]) + self.cli_set(path + ['tls', 'ca-cert-file', ca_cert]) + self.cli_set(path + ['tls', 'cert-file', ssl_cert]) + self.cli_set(path + ['tls', 'key-file', ssl_key]) # check validate() - can not have auth username without a password - self.session.set(path + ['authentication', 'username', 'vyos']) + self.cli_set(path + ['authentication', 'username', 'vyos']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['authentication', 'password', 'vyos']) + self.cli_commit() + self.cli_set(path + ['authentication', 'password', 'vyos']) # client commit must pass - self.session.commit() + self.cli_commit() self.assertTrue(process_named_running(PROCESS_NAME)) self.assertIn(interface, interfaces()) @@ -152,22 +152,22 @@ class TestInterfacesOpenVPN(unittest.TestCase): path = base_path + [interface] auth_hash = 'sha1' - self.session.set(path + ['device-type', 'tun']) - self.session.set(path + ['encryption', 'cipher', 'aes256']) - self.session.set(path + ['hash', auth_hash]) - self.session.set(path + ['mode', 'client']) - self.session.set(path + ['persistent-tunnel']) - self.session.set(path + ['protocol', protocol]) - self.session.set(path + ['remote-host', remote_host]) - self.session.set(path + ['remote-port', remote_port]) - self.session.set(path + ['tls', 'ca-cert-file', ca_cert]) - self.session.set(path + ['tls', 'cert-file', ssl_cert]) - self.session.set(path + ['tls', 'key-file', ssl_key]) - self.session.set(path + ['vrf', vrf_name]) - self.session.set(path + ['authentication', 'username', interface+'user']) - self.session.set(path + ['authentication', 'password', interface+'secretpw']) - - self.session.commit() + self.cli_set(path + ['device-type', 'tun']) + self.cli_set(path + ['encryption', 'cipher', 'aes256']) + self.cli_set(path + ['hash', auth_hash]) + self.cli_set(path + ['mode', 'client']) + self.cli_set(path + ['persistent-tunnel']) + self.cli_set(path + ['protocol', protocol]) + self.cli_set(path + ['remote-host', remote_host]) + self.cli_set(path + ['remote-port', remote_port]) + self.cli_set(path + ['tls', 'ca-cert-file', ca_cert]) + self.cli_set(path + ['tls', 'cert-file', ssl_cert]) + self.cli_set(path + ['tls', 'key-file', ssl_key]) + self.cli_set(path + ['vrf', vrf_name]) + self.cli_set(path + ['authentication', 'username', interface+'user']) + self.cli_set(path + ['authentication', 'password', interface+'secretpw']) + + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' @@ -200,8 +200,8 @@ class TestInterfacesOpenVPN(unittest.TestCase): self.assertIn(f'{interface}secretpw', pw) # check that no interface remained after deleting them - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' @@ -213,104 +213,104 @@ class TestInterfacesOpenVPN(unittest.TestCase): path = base_path + [interface] # check validate() - must speciy operating mode - self.session.set(path) + self.cli_set(path) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['mode', 'server']) + self.cli_commit() + self.cli_set(path + ['mode', 'server']) # check validate() - cannot specify protocol tcp-active in server mode - self.session.set(path + ['protocol', 'tcp-active']) + self.cli_set(path + ['protocol', 'tcp-active']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['protocol']) + self.cli_commit() + self.cli_delete(path + ['protocol']) # check validate() - cannot specify local-port in client mode - self.session.set(path + ['remote-port', '5000']) + self.cli_set(path + ['remote-port', '5000']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['remote-port']) + self.cli_commit() + self.cli_delete(path + ['remote-port']) # check validate() - cannot specify local-host in client mode - self.session.set(path + ['remote-host', '127.0.0.1']) + self.cli_set(path + ['remote-host', '127.0.0.1']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['remote-host']) + self.cli_commit() + self.cli_delete(path + ['remote-host']) # check validate() - must specify "tls dh-file" when not using EC keys # in server mode with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['tls', 'dh-file', dh_pem]) + self.cli_commit() + self.cli_set(path + ['tls', 'dh-file', dh_pem]) # check validate() - must specify "server subnet" or add interface to # bridge in server mode with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() # check validate() - server client-ip-pool is too large # [100.64.0.4 -> 100.127.255.251 = 4194295], maximum is 65536 addresses. - self.session.set(path + ['server', 'subnet', '100.64.0.0/10']) + self.cli_set(path + ['server', 'subnet', '100.64.0.0/10']) with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() # check validate() - cannot specify more than 1 IPv4 and 1 IPv6 server subnet - self.session.set(path + ['server', 'subnet', '100.64.0.0/20']) + self.cli_set(path + ['server', 'subnet', '100.64.0.0/20']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['server', 'subnet', '100.64.0.0/10']) + self.cli_commit() + self.cli_delete(path + ['server', 'subnet', '100.64.0.0/10']) # check validate() - must specify "tls ca-cert-file" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['tls', 'ca-cert-file', ca_cert]) + self.cli_commit() + self.cli_set(path + ['tls', 'ca-cert-file', ca_cert]) # check validate() - must specify "tls cert-file" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['tls', 'cert-file', ssl_cert]) + self.cli_commit() + self.cli_set(path + ['tls', 'cert-file', ssl_cert]) # check validate() - must specify "tls key-file" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['tls', 'key-file', ssl_key]) + self.cli_commit() + self.cli_set(path + ['tls', 'key-file', ssl_key]) # check validate() - cannot specify "tls role" in client-server mode' - self.session.set(path + ['tls', 'role', 'active']) + self.cli_set(path + ['tls', 'role', 'active']) with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() # check validate() - cannot specify "tls role" in client-server mode' - self.session.set(path + ['tls', 'auth-file', auth_key]) + self.cli_set(path + ['tls', 'auth-file', auth_key]) with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() # check validate() - cannot specify "tcp-passive" when "tls role" is "active" - self.session.set(path + ['protocol', 'tcp-passive']) + self.cli_set(path + ['protocol', 'tcp-passive']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['protocol']) + self.cli_commit() + self.cli_delete(path + ['protocol']) # check validate() - cannot specify "tls dh-file" when "tls role" is "active" - self.session.set(path + ['tls', 'dh-file', dh_pem]) + self.cli_set(path + ['tls', 'dh-file', dh_pem]) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['tls', 'dh-file']) + self.cli_commit() + self.cli_delete(path + ['tls', 'dh-file']) # Now test the other path with tls role passive - self.session.set(path + ['tls', 'role', 'passive']) + self.cli_set(path + ['tls', 'role', 'passive']) # check validate() - cannot specify "tcp-active" when "tls role" is "passive" - self.session.set(path + ['protocol', 'tcp-active']) + self.cli_set(path + ['protocol', 'tcp-active']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['protocol']) + self.cli_commit() + self.cli_delete(path + ['protocol']) # check validate() - must specify "tls dh-file" when "tls role" is "passive" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['tls', 'dh-file', dh_pem]) + self.cli_commit() + self.cli_set(path + ['tls', 'dh-file', dh_pem]) - self.session.commit() + self.cli_commit() self.assertTrue(process_named_running(PROCESS_NAME)) self.assertIn(interface, interfaces()) @@ -330,29 +330,29 @@ class TestInterfacesOpenVPN(unittest.TestCase): path = base_path + [interface] port = str(2000 + ii) - self.session.set(path + ['device-type', 'tun']) - self.session.set(path + ['encryption', 'cipher', 'aes192']) - self.session.set(path + ['hash', auth_hash]) - self.session.set(path + ['mode', 'server']) - self.session.set(path + ['local-port', port]) - self.session.set(path + ['server', 'subnet', subnet]) - self.session.set(path + ['server', 'topology', 'subnet']) - self.session.set(path + ['keep-alive', 'failure-count', '5']) - self.session.set(path + ['keep-alive', 'interval', '5']) + self.cli_set(path + ['device-type', 'tun']) + self.cli_set(path + ['encryption', 'cipher', 'aes192']) + self.cli_set(path + ['hash', auth_hash]) + self.cli_set(path + ['mode', 'server']) + self.cli_set(path + ['local-port', port]) + self.cli_set(path + ['server', 'subnet', subnet]) + self.cli_set(path + ['server', 'topology', 'subnet']) + self.cli_set(path + ['keep-alive', 'failure-count', '5']) + self.cli_set(path + ['keep-alive', 'interval', '5']) # clients - self.session.set(path + ['server', 'client', 'client1', 'ip', client_ip]) + self.cli_set(path + ['server', 'client', 'client1', 'ip', client_ip]) for route in client1_routes: - self.session.set(path + ['server', 'client', 'client1', 'subnet', route]) + self.cli_set(path + ['server', 'client', 'client1', 'subnet', route]) - self.session.set(path + ['replace-default-route']) - self.session.set(path + ['tls', 'ca-cert-file', ca_cert]) - self.session.set(path + ['tls', 'cert-file', ssl_cert]) - self.session.set(path + ['tls', 'key-file', ssl_key]) - self.session.set(path + ['tls', 'dh-file', dh_pem]) - self.session.set(path + ['vrf', vrf_name]) + self.cli_set(path + ['replace-default-route']) + self.cli_set(path + ['tls', 'ca-cert-file', ca_cert]) + self.cli_set(path + ['tls', 'cert-file', ssl_cert]) + self.cli_set(path + ['tls', 'key-file', ssl_key]) + self.cli_set(path + ['tls', 'dh-file', dh_pem]) + self.cli_set(path + ['vrf', vrf_name]) - self.session.commit() + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' @@ -404,8 +404,8 @@ class TestInterfacesOpenVPN(unittest.TestCase): self.assertIn(interface, interfaces()) # check that no interface remained after deleting them - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' @@ -423,23 +423,23 @@ class TestInterfacesOpenVPN(unittest.TestCase): path = base_path + [interface] port = str(2000 + ii) - self.session.set(path + ['device-type', 'tun']) - self.session.set(path + ['encryption', 'cipher', 'aes192']) - self.session.set(path + ['hash', auth_hash]) - self.session.set(path + ['mode', 'server']) - self.session.set(path + ['local-port', port]) - self.session.set(path + ['server', 'subnet', subnet]) - self.session.set(path + ['server', 'topology', 'net30']) - self.session.set(path + ['replace-default-route']) - self.session.set(path + ['keep-alive', 'failure-count', '10']) - self.session.set(path + ['keep-alive', 'interval', '5']) - self.session.set(path + ['tls', 'ca-cert-file', ca_cert]) - self.session.set(path + ['tls', 'cert-file', ssl_cert]) - self.session.set(path + ['tls', 'key-file', ssl_key]) - self.session.set(path + ['tls', 'dh-file', dh_pem]) - self.session.set(path + ['vrf', vrf_name]) - - self.session.commit() + self.cli_set(path + ['device-type', 'tun']) + self.cli_set(path + ['encryption', 'cipher', 'aes192']) + self.cli_set(path + ['hash', auth_hash]) + self.cli_set(path + ['mode', 'server']) + self.cli_set(path + ['local-port', port]) + self.cli_set(path + ['server', 'subnet', subnet]) + self.cli_set(path + ['server', 'topology', 'net30']) + self.cli_set(path + ['replace-default-route']) + self.cli_set(path + ['keep-alive', 'failure-count', '10']) + self.cli_set(path + ['keep-alive', 'interval', '5']) + self.cli_set(path + ['tls', 'ca-cert-file', ca_cert]) + self.cli_set(path + ['tls', 'cert-file', ssl_cert]) + self.cli_set(path + ['tls', 'key-file', ssl_key]) + self.cli_set(path + ['tls', 'dh-file', dh_pem]) + self.cli_set(path + ['vrf', vrf_name]) + + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' @@ -479,8 +479,8 @@ class TestInterfacesOpenVPN(unittest.TestCase): self.assertIn(interface, interfaces()) # check that no interface remained after deleting them - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' @@ -493,57 +493,57 @@ class TestInterfacesOpenVPN(unittest.TestCase): interface = 'vtun5000' path = base_path + [interface] - self.session.set(path + ['mode', 'site-to-site']) + self.cli_set(path + ['mode', 'site-to-site']) # check validate() - encryption ncp-ciphers cannot be specified in site-to-site mode - self.session.set(path + ['encryption', 'ncp-ciphers', 'aes192gcm']) + self.cli_set(path + ['encryption', 'ncp-ciphers', 'aes192gcm']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['encryption']) + self.cli_commit() + self.cli_delete(path + ['encryption']) # check validate() - must specify "local-address" or add interface to bridge with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['local-address', '10.0.0.1']) - self.session.set(path + ['local-address', '2001:db8:1::1']) + self.cli_commit() + self.cli_set(path + ['local-address', '10.0.0.1']) + self.cli_set(path + ['local-address', '2001:db8:1::1']) # check validate() - cannot specify more than 1 IPv4 local-address - self.session.set(path + ['local-address', '10.0.0.2']) + self.cli_set(path + ['local-address', '10.0.0.2']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['local-address', '10.0.0.2']) + self.cli_commit() + self.cli_delete(path + ['local-address', '10.0.0.2']) # check validate() - cannot specify more than 1 IPv6 local-address - self.session.set(path + ['local-address', '2001:db8:1::2']) + self.cli_set(path + ['local-address', '2001:db8:1::2']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['local-address', '2001:db8:1::2']) + self.cli_commit() + self.cli_delete(path + ['local-address', '2001:db8:1::2']) # check validate() - IPv4 "local-address" requires IPv4 "remote-address" # or IPv4 "local-address subnet" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['remote-address', '192.168.0.1']) - self.session.set(path + ['remote-address', '2001:db8:ffff::1']) + self.cli_commit() + self.cli_set(path + ['remote-address', '192.168.0.1']) + self.cli_set(path + ['remote-address', '2001:db8:ffff::1']) # check validate() - Cannot specify more than 1 IPv4 "remote-address" - self.session.set(path + ['remote-address', '192.168.0.2']) + self.cli_set(path + ['remote-address', '192.168.0.2']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['remote-address', '192.168.0.2']) + self.cli_commit() + self.cli_delete(path + ['remote-address', '192.168.0.2']) # check validate() - Cannot specify more than 1 IPv6 "remote-address" - self.session.set(path + ['remote-address', '2001:db8:ffff::2']) + self.cli_set(path + ['remote-address', '2001:db8:ffff::2']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(path + ['remote-address', '2001:db8:ffff::2']) + self.cli_commit() + self.cli_delete(path + ['remote-address', '2001:db8:ffff::2']) # check validate() - Must specify one of "shared-secret-key-file" and "tls" with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(path + ['shared-secret-key-file', s2s_key]) + self.cli_commit() + self.cli_set(path + ['shared-secret-key-file', s2s_key]) - self.session.commit() + self.cli_commit() def test_openvpn_site2site_interfaces_tun(self): # Create two OpenVPN site-to-site interfaces @@ -561,23 +561,23 @@ class TestInterfacesOpenVPN(unittest.TestCase): path = base_path + [interface] port = str(3000 + ii) - self.session.set(path + ['local-address', local_address]) + self.cli_set(path + ['local-address', local_address]) # even numbers use tun type, odd numbers use tap type if ii % 2 == 0: - self.session.set(path + ['device-type', 'tun']) + self.cli_set(path + ['device-type', 'tun']) else: - self.session.set(path + ['device-type', 'tap']) - self.session.set(path + ['local-address', local_address, 'subnet-mask', local_address_subnet]) + self.cli_set(path + ['device-type', 'tap']) + self.cli_set(path + ['local-address', local_address, 'subnet-mask', local_address_subnet]) - self.session.set(path + ['mode', 'site-to-site']) - self.session.set(path + ['local-port', port]) - self.session.set(path + ['remote-port', port]) - self.session.set(path + ['shared-secret-key-file', s2s_key]) - self.session.set(path + ['remote-address', remote_address]) - self.session.set(path + ['vrf', vrf_name]) + self.cli_set(path + ['mode', 'site-to-site']) + self.cli_set(path + ['local-port', port]) + self.cli_set(path + ['remote-port', port]) + self.cli_set(path + ['shared-secret-key-file', s2s_key]) + self.cli_set(path + ['remote-address', remote_address]) + self.cli_set(path + ['vrf', vrf_name]) - self.session.commit() + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' @@ -608,8 +608,8 @@ class TestInterfacesOpenVPN(unittest.TestCase): # check that no interface remained after deleting them - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() for ii in num_range: interface = f'vtun{ii}' diff --git a/smoketest/scripts/cli/test_interfaces_pppoe.py b/smoketest/scripts/cli/test_interfaces_pppoe.py index 285c756e2..b8682fe71 100755 --- a/smoketest/scripts/cli/test_interfaces_pppoe.py +++ b/smoketest/scripts/cli/test_interfaces_pppoe.py @@ -15,11 +15,13 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. import re -import os import unittest from psutil import process_iter -from vyos.configsession import ConfigSession, ConfigSessionError +from base_vyostest_shim import VyOSUnitTestSHIM + +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError from vyos.util import read_file config_file = '/etc/ppp/peers/{}' @@ -42,16 +44,14 @@ def get_dhcp6c_config_value(interface, key): out.append(item.replace(';','')) return out -class PPPoEInterfaceTest(unittest.TestCase): +class PPPoEInterfaceTest(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) self._interfaces = ['pppoe10', 'pppoe20', 'pppoe30'] self._source_interface = 'eth0' def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_pppoe_client(self): # Check if PPPoE dialer can be configured and runs @@ -60,19 +60,19 @@ class PPPoEInterfaceTest(unittest.TestCase): passwd = 'VyOS-passwd-' + interface mtu = '1400' - self.session.set(base_path + [interface, 'authentication', 'user', user]) - self.session.set(base_path + [interface, 'authentication', 'password', passwd]) - self.session.set(base_path + [interface, 'default-route', 'auto']) - self.session.set(base_path + [interface, 'mtu', mtu]) - self.session.set(base_path + [interface, 'no-peer-dns']) + self.cli_set(base_path + [interface, 'authentication', 'user', user]) + self.cli_set(base_path + [interface, 'authentication', 'password', passwd]) + self.cli_set(base_path + [interface, 'default-route', 'auto']) + self.cli_set(base_path + [interface, 'mtu', mtu]) + self.cli_set(base_path + [interface, 'no-peer-dns']) # check validate() - a source-interface is required with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + [interface, 'source-interface', self._source_interface]) + self.cli_commit() + self.cli_set(base_path + [interface, 'source-interface', self._source_interface]) # commit changes - self.session.commit() + self.cli_commit() # verify configuration file(s) for interface in self._interfaces: @@ -101,12 +101,12 @@ class PPPoEInterfaceTest(unittest.TestCase): def test_pppoe_clent_disabled_interface(self): # Check if PPPoE Client can be disabled for interface in self._interfaces: - self.session.set(base_path + [interface, 'authentication', 'user', 'vyos']) - self.session.set(base_path + [interface, 'authentication', 'password', 'vyos']) - self.session.set(base_path + [interface, 'source-interface', self._source_interface]) - self.session.set(base_path + [interface, 'disable']) + self.cli_set(base_path + [interface, 'authentication', 'user', 'vyos']) + self.cli_set(base_path + [interface, 'authentication', 'password', 'vyos']) + self.cli_set(base_path + [interface, 'source-interface', self._source_interface]) + self.cli_set(base_path + [interface, 'disable']) - self.session.commit() + self.cli_commit() # Validate PPPoE client process running = False @@ -124,21 +124,21 @@ class PPPoEInterfaceTest(unittest.TestCase): sla_id = '0' sla_len = '8' for interface in self._interfaces: - self.session.set(base_path + [interface, 'authentication', 'user', 'vyos']) - self.session.set(base_path + [interface, 'authentication', 'password', 'vyos']) - self.session.set(base_path + [interface, 'default-route', 'none']) - self.session.set(base_path + [interface, 'no-peer-dns']) - self.session.set(base_path + [interface, 'source-interface', self._source_interface]) - self.session.set(base_path + [interface, 'ipv6', 'address', 'autoconf']) + self.cli_set(base_path + [interface, 'authentication', 'user', 'vyos']) + self.cli_set(base_path + [interface, 'authentication', 'password', 'vyos']) + self.cli_set(base_path + [interface, 'default-route', 'none']) + self.cli_set(base_path + [interface, 'no-peer-dns']) + self.cli_set(base_path + [interface, 'source-interface', self._source_interface]) + self.cli_set(base_path + [interface, 'ipv6', 'address', 'autoconf']) # prefix delegation stuff dhcpv6_pd_base = base_path + [interface, 'dhcpv6-options', 'pd', '0'] - self.session.set(dhcpv6_pd_base + ['length', '56']) - self.session.set(dhcpv6_pd_base + ['interface', self._source_interface, 'address', address]) - self.session.set(dhcpv6_pd_base + ['interface', self._source_interface, 'sla-id', sla_id]) + self.cli_set(dhcpv6_pd_base + ['length', '56']) + self.cli_set(dhcpv6_pd_base + ['interface', self._source_interface, 'address', address]) + self.cli_set(dhcpv6_pd_base + ['interface', self._source_interface, 'sla-id', sla_id]) # commit changes - self.session.commit() + self.cli_commit() # verify "normal" PPPoE value - 1492 is default MTU tmp = get_config_value(interface, 'mtu')[1] diff --git a/smoketest/scripts/cli/test_interfaces_pseudo_ethernet.py b/smoketest/scripts/cli/test_interfaces_pseudo_ethernet.py index f4cb4cdc9..ff343bb87 100755 --- a/smoketest/scripts/cli/test_interfaces_pseudo_ethernet.py +++ b/smoketest/scripts/cli/test_interfaces_pseudo_ethernet.py @@ -18,7 +18,7 @@ import unittest from base_interfaces_test import BasicInterfaceTest -class PEthInterfaceTest(BasicInterfaceTest.BaseTest): +class PEthInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -34,6 +34,8 @@ class PEthInterfaceTest(BasicInterfaceTest.BaseTest): 'peth1': ['source-interface eth1'], } cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_interfaces_tunnel.py b/smoketest/scripts/cli/test_interfaces_tunnel.py index cad6764e6..6af31ddff 100755 --- a/smoketest/scripts/cli/test_interfaces_tunnel.py +++ b/smoketest/scripts/cli/test_interfaces_tunnel.py @@ -16,19 +16,18 @@ import unittest -from vyos.configsession import ConfigSession +from base_interfaces_test import BasicInterfaceTest + from vyos.configsession import ConfigSessionError -from vyos.util import get_json_iface_options +from vyos.util import get_interface_config from vyos.template import inc_ip -from base_interfaces_test import BasicInterfaceTest - remote_ip4 = '192.0.2.100' remote_ip6 = '2001:db8::ffff' source_if = 'dum2222' mtu = 1476 -class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): +class TunnelInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -42,14 +41,16 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): 'tun20': ['encapsulation gre', 'remote 192.0.2.20', 'source-address ' + cls.local_v4], } cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() def setUp(self): super().setUp() - self.session.set(['interfaces', 'dummy', source_if, 'address', self.local_v4 + '/32']) - self.session.set(['interfaces', 'dummy', source_if, 'address', self.local_v6 + '/128']) + self.cli_set(['interfaces', 'dummy', source_if, 'address', self.local_v4 + '/32']) + self.cli_set(['interfaces', 'dummy', source_if, 'address', self.local_v6 + '/128']) def tearDown(self): - self.session.delete(['interfaces', 'dummy', source_if]) + self.cli_delete(['interfaces', 'dummy', source_if]) super().tearDown() def test_ipv4_encapsulations(self): @@ -59,32 +60,32 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): interface = f'tun1000' local_if_addr = f'10.10.200.1/24' for encapsulation in ['ipip', 'sit', 'gre', 'gretap']: - self.session.set(self._base_path + [interface, 'address', local_if_addr]) - self.session.set(self._base_path + [interface, 'encapsulation', encapsulation]) - self.session.set(self._base_path + [interface, 'source-address', self.local_v6]) - self.session.set(self._base_path + [interface, 'remote', remote_ip6]) + self.cli_set(self._base_path + [interface, 'address', local_if_addr]) + self.cli_set(self._base_path + [interface, 'encapsulation', encapsulation]) + self.cli_set(self._base_path + [interface, 'source-address', self.local_v6]) + self.cli_set(self._base_path + [interface, 'remote', remote_ip6]) # Encapsulation mode requires IPv4 source-address with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'source-address', self.local_v4]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'source-address', self.local_v4]) # Encapsulation mode requires IPv4 remote with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'remote', remote_ip4]) - self.session.set(self._base_path + [interface, 'source-interface', source_if]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'remote', remote_ip4]) + self.cli_set(self._base_path + [interface, 'source-interface', source_if]) # Source interface can not be used with sit and gretap if encapsulation in ['sit', 'gretap']: with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(self._base_path + [interface, 'source-interface']) + self.cli_commit() + self.cli_delete(self._base_path + [interface, 'source-interface']) # Check if commit is ok - self.session.commit() + self.cli_commit() - conf = get_json_iface_options(interface) + conf = get_interface_config(interface) if encapsulation not in ['sit', 'gretap']: self.assertEqual(source_if, conf['link']) @@ -96,8 +97,8 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): self.assertTrue(conf['linkinfo']['info_data']['pmtudisc']) # cleanup this instance - self.session.delete(self._base_path + [interface]) - self.session.commit() + self.cli_delete(self._base_path + [interface]) + self.cli_commit() def test_ipv6_encapsulations(self): # When running tests ensure that for certain encapsulation types the @@ -106,33 +107,33 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): interface = f'tun1010' local_if_addr = f'10.10.200.1/24' for encapsulation in ['ipip6', 'ip6ip6', 'ip6gre', 'ip6gretap']: - self.session.set(self._base_path + [interface, 'address', local_if_addr]) - self.session.set(self._base_path + [interface, 'encapsulation', encapsulation]) - self.session.set(self._base_path + [interface, 'source-address', self.local_v4]) - self.session.set(self._base_path + [interface, 'remote', remote_ip4]) + self.cli_set(self._base_path + [interface, 'address', local_if_addr]) + self.cli_set(self._base_path + [interface, 'encapsulation', encapsulation]) + self.cli_set(self._base_path + [interface, 'source-address', self.local_v4]) + self.cli_set(self._base_path + [interface, 'remote', remote_ip4]) # Encapsulation mode requires IPv6 source-address with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'source-address', self.local_v6]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'source-address', self.local_v6]) # Encapsulation mode requires IPv6 remote with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'remote', remote_ip6]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'remote', remote_ip6]) # Configure Tunnel Source interface - self.session.set(self._base_path + [interface, 'source-interface', source_if]) + self.cli_set(self._base_path + [interface, 'source-interface', source_if]) # Source interface can not be used with ip6gretap if encapsulation in ['ip6gretap']: with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(self._base_path + [interface, 'source-interface']) + self.cli_commit() + self.cli_delete(self._base_path + [interface, 'source-interface']) # Check if commit is ok - self.session.commit() + self.cli_commit() - conf = get_json_iface_options(interface) + conf = get_interface_config(interface) if encapsulation not in ['ip6gretap']: self.assertEqual(source_if, conf['link']) @@ -152,8 +153,8 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): self.assertEqual(remote_ip6, conf['linkinfo']['info_data']['remote']) # cleanup this instance - self.session.delete(self._base_path + [interface]) - self.session.commit() + self.cli_delete(self._base_path + [interface]) + self.cli_commit() def test_tunnel_verify_local_dhcp(self): # We can not use source-address and dhcp-interface at the same time @@ -161,19 +162,19 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): interface = f'tun1020' local_if_addr = f'10.0.0.1/24' - self.session.set(self._base_path + [interface, 'address', local_if_addr]) - self.session.set(self._base_path + [interface, 'encapsulation', 'gre']) - self.session.set(self._base_path + [interface, 'source-address', self.local_v4]) - self.session.set(self._base_path + [interface, 'remote', remote_ip4]) - self.session.set(self._base_path + [interface, 'dhcp-interface', 'eth0']) + self.cli_set(self._base_path + [interface, 'address', local_if_addr]) + self.cli_set(self._base_path + [interface, 'encapsulation', 'gre']) + self.cli_set(self._base_path + [interface, 'source-address', self.local_v4]) + self.cli_set(self._base_path + [interface, 'remote', remote_ip4]) + self.cli_set(self._base_path + [interface, 'dhcp-interface', 'eth0']) # source-address and dhcp-interface can not be used at the same time with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(self._base_path + [interface, 'dhcp-interface']) + self.cli_commit() + self.cli_delete(self._base_path + [interface, 'dhcp-interface']) # Check if commit is ok - self.session.commit() + self.cli_commit() def test_tunnel_parameters_gre(self): interface = f'tun1030' @@ -181,18 +182,18 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): encapsulation = 'gre' tos = '20' - self.session.set(self._base_path + [interface, 'encapsulation', encapsulation]) - self.session.set(self._base_path + [interface, 'source-address', self.local_v4]) - self.session.set(self._base_path + [interface, 'remote', remote_ip4]) + self.cli_set(self._base_path + [interface, 'encapsulation', encapsulation]) + self.cli_set(self._base_path + [interface, 'source-address', self.local_v4]) + self.cli_set(self._base_path + [interface, 'remote', remote_ip4]) - self.session.set(self._base_path + [interface, 'parameters', 'ip', 'no-pmtu-discovery']) - self.session.set(self._base_path + [interface, 'parameters', 'ip', 'key', gre_key]) - self.session.set(self._base_path + [interface, 'parameters', 'ip', 'tos', tos]) + self.cli_set(self._base_path + [interface, 'parameters', 'ip', 'no-pmtu-discovery']) + self.cli_set(self._base_path + [interface, 'parameters', 'ip', 'key', gre_key]) + self.cli_set(self._base_path + [interface, 'parameters', 'ip', 'tos', tos]) # Check if commit is ok - self.session.commit() + self.cli_commit() - conf = get_json_iface_options(interface) + conf = get_interface_config(interface) self.assertEqual(mtu, conf['mtu']) self.assertEqual(interface, conf['ifname']) self.assertEqual(encapsulation, conf['linkinfo']['info_kind']) @@ -207,14 +208,14 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): encapsulation = 'gretap' tos = '20' - self.session.set(self._base_path + [interface, 'encapsulation', encapsulation]) - self.session.set(self._base_path + [interface, 'source-address', self.local_v4]) - self.session.set(self._base_path + [interface, 'remote', remote_ip4]) + self.cli_set(self._base_path + [interface, 'encapsulation', encapsulation]) + self.cli_set(self._base_path + [interface, 'source-address', self.local_v4]) + self.cli_set(self._base_path + [interface, 'remote', remote_ip4]) # Check if commit is ok - self.session.commit() + self.cli_commit() - conf = get_json_iface_options(interface) + conf = get_interface_config(interface) self.assertEqual(mtu, conf['mtu']) self.assertEqual(interface, conf['ifname']) self.assertEqual(encapsulation, conf['linkinfo']['info_kind']) @@ -224,12 +225,12 @@ class TunnelInterfaceTest(BasicInterfaceTest.BaseTest): # Change remote ip address (inc host by 2 new_remote = inc_ip(remote_ip4, 2) - self.session.set(self._base_path + [interface, 'remote', new_remote]) + self.cli_set(self._base_path + [interface, 'remote', new_remote]) # Check if commit is ok - self.session.commit() + self.cli_commit() - conf = get_json_iface_options(interface) + conf = get_interface_config(interface) self.assertEqual(new_remote, conf['linkinfo']['info_data']['remote']) if __name__ == '__main__': - unittest.main(verbosity=2, failfast=True) + unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_interfaces_vxlan.py b/smoketest/scripts/cli/test_interfaces_vxlan.py index b66315c5e..7b420cd51 100755 --- a/smoketest/scripts/cli/test_interfaces_vxlan.py +++ b/smoketest/scripts/cli/test_interfaces_vxlan.py @@ -18,11 +18,11 @@ import unittest from vyos.configsession import ConfigSession from vyos.ifconfig import Interface -from vyos.util import get_json_iface_options +from vyos.util import get_interface_config from base_interfaces_test import BasicInterfaceTest -class VXLANInterfaceTest(BasicInterfaceTest.BaseTest): +class VXLANInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -35,24 +35,26 @@ class VXLANInterfaceTest(BasicInterfaceTest.BaseTest): 'vxlan30': ['vni 30', 'remote 2001:db8:2000::1', 'source-address 2001:db8:1000::1', 'parameters ipv6 flowlabel 0x1000'], } cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() def test_vxlan_parameters(self): tos = '40' ttl = 20 for intf in self._interfaces: for option in self._options.get(intf, []): - self.session.set(self._base_path + [intf] + option.split()) + self.cli_set(self._base_path + [intf] + option.split()) - self.session.set(self._base_path + [intf, 'parameters', 'ip', 'dont-fragment']) - self.session.set(self._base_path + [intf, 'parameters', 'ip', 'tos', tos]) - self.session.set(self._base_path + [intf, 'parameters', 'ip', 'ttl', str(ttl)]) + self.cli_set(self._base_path + [intf, 'parameters', 'ip', 'dont-fragment']) + self.cli_set(self._base_path + [intf, 'parameters', 'ip', 'tos', tos]) + self.cli_set(self._base_path + [intf, 'parameters', 'ip', 'ttl', str(ttl)]) ttl += 10 - self.session.commit() + self.cli_commit() ttl = 20 for interface in self._interfaces: - options = get_json_iface_options(interface) + options = get_interface_config(interface) vni = options['linkinfo']['info_data']['id'] self.assertIn(f'vni {vni}', self._options[interface]) diff --git a/smoketest/scripts/cli/test_interfaces_wireguard.py b/smoketest/scripts/cli/test_interfaces_wireguard.py index e70324f96..d31ec0332 100755 --- a/smoketest/scripts/cli/test_interfaces_wireguard.py +++ b/smoketest/scripts/cli/test_interfaces_wireguard.py @@ -17,8 +17,10 @@ import os import unittest -from vyos.configsession import ConfigSession, ConfigSessionError -from base_interfaces_test import BasicInterfaceTest +from base_vyostest_shim import VyOSUnitTestSHIM +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError + # Generate WireGuard default keypair if not os.path.isdir('/config/auth/wireguard/default'): @@ -26,17 +28,15 @@ if not os.path.isdir('/config/auth/wireguard/default'): base_path = ['interfaces', 'wireguard'] -class WireGuardInterfaceTest(unittest.TestCase): +class WireGuardInterfaceTest(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) self._test_addr = ['192.0.2.1/26', '192.0.2.255/31', '192.0.2.64/32', '2001:db8:1::ffff/64', '2001:db8:101::1/112'] self._interfaces = ['wg0', 'wg1'] def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_wireguard_peer(self): # Create WireGuard interfaces with associated peers @@ -46,19 +46,19 @@ class WireGuardInterfaceTest(unittest.TestCase): pubkey = 'n6ZZL7ph/QJUJSUUTyu19c77my1dRCDHkMzFQUO9Z3A=' for addr in self._test_addr: - self.session.set(base_path + [intf, 'address', addr]) + self.cli_set(base_path + [intf, 'address', addr]) - self.session.set(base_path + [intf, 'peer', peer, 'address', '127.0.0.1']) - self.session.set(base_path + [intf, 'peer', peer, 'port', '1337']) + self.cli_set(base_path + [intf, 'peer', peer, 'address', '127.0.0.1']) + self.cli_set(base_path + [intf, 'peer', peer, 'port', '1337']) # Allow different prefixes to traverse the tunnel allowed_ips = ['10.0.0.0/8', '172.16.0.0/12', '192.168.0.0/16'] for ip in allowed_ips: - self.session.set(base_path + [intf, 'peer', peer, 'allowed-ips', ip]) + self.cli_set(base_path + [intf, 'peer', peer, 'allowed-ips', ip]) - self.session.set(base_path + [intf, 'peer', peer, 'preshared-key', psk]) - self.session.set(base_path + [intf, 'peer', peer, 'pubkey', pubkey]) - self.session.commit() + self.cli_set(base_path + [intf, 'peer', peer, 'preshared-key', psk]) + self.cli_set(base_path + [intf, 'peer', peer, 'pubkey', pubkey]) + self.cli_commit() self.assertTrue(os.path.isdir(f'/sys/class/net/{intf}')) @@ -71,26 +71,26 @@ class WireGuardInterfaceTest(unittest.TestCase): pubkey_1 = 'n1CUsmR0M2LUUsyicBd6blZICwUqqWWHbu4ifZ2/9gk=' pubkey_2 = 'ebFx/1G0ti8tvuZd94sEIosAZZIznX+dBAKG/8DFm0I=' - self.session.set(base_path + [interface, 'address', '172.16.0.1/24']) + self.cli_set(base_path + [interface, 'address', '172.16.0.1/24']) - self.session.set(base_path + [interface, 'peer', 'PEER01', 'pubkey', pubkey_1]) - self.session.set(base_path + [interface, 'peer', 'PEER01', 'port', port]) - self.session.set(base_path + [interface, 'peer', 'PEER01', 'allowed-ips', '10.205.212.10/32']) - self.session.set(base_path + [interface, 'peer', 'PEER01', 'address', '192.0.2.1']) + self.cli_set(base_path + [interface, 'peer', 'PEER01', 'pubkey', pubkey_1]) + self.cli_set(base_path + [interface, 'peer', 'PEER01', 'port', port]) + self.cli_set(base_path + [interface, 'peer', 'PEER01', 'allowed-ips', '10.205.212.10/32']) + self.cli_set(base_path + [interface, 'peer', 'PEER01', 'address', '192.0.2.1']) - self.session.set(base_path + [interface, 'peer', 'PEER02', 'pubkey', pubkey_2]) - self.session.set(base_path + [interface, 'peer', 'PEER02', 'port', port]) - self.session.set(base_path + [interface, 'peer', 'PEER02', 'allowed-ips', '10.205.212.11/32']) - self.session.set(base_path + [interface, 'peer', 'PEER02', 'address', '192.0.2.2']) + self.cli_set(base_path + [interface, 'peer', 'PEER02', 'pubkey', pubkey_2]) + self.cli_set(base_path + [interface, 'peer', 'PEER02', 'port', port]) + self.cli_set(base_path + [interface, 'peer', 'PEER02', 'allowed-ips', '10.205.212.11/32']) + self.cli_set(base_path + [interface, 'peer', 'PEER02', 'address', '192.0.2.2']) # Commit peers - self.session.commit() + self.cli_commit() self.assertTrue(os.path.isdir(f'/sys/class/net/{interface}')) # Delete second peer - self.session.delete(base_path + [interface, 'peer', 'PEER01']) - self.session.commit() + self.cli_delete(base_path + [interface, 'peer', 'PEER01']) + self.cli_commit() if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_interfaces_wireless.py b/smoketest/scripts/cli/test_interfaces_wireless.py index 39e8cd5b8..4f539a23c 100755 --- a/smoketest/scripts/cli/test_interfaces_wireless.py +++ b/smoketest/scripts/cli/test_interfaces_wireless.py @@ -31,7 +31,7 @@ def get_config_value(interface, key): tmp = re.findall(f'{key}=+(.*)', tmp) return tmp[0] -class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): +class WirelessInterfaceTest(BasicInterfaceTest.TestCase): @classmethod def setUpClass(cls): cls._test_ip = True @@ -47,6 +47,8 @@ class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): 'type access-point', 'address 192.0.2.13/30', 'channel 0'], } cls._interfaces = list(cls._options) + # call base-classes classmethod + super(cls, cls).setUpClass() def test_wireless_add_single_ip_address(self): # derived method to check if member interfaces are enslaved properly @@ -67,12 +69,12 @@ class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): interface = 'wlan0' ssid = 'ssid' - self.session.set(self._base_path + [interface, 'ssid', ssid]) - self.session.set(self._base_path + [interface, 'country-code', 'se']) - self.session.set(self._base_path + [interface, 'type', 'access-point']) + self.cli_set(self._base_path + [interface, 'ssid', ssid]) + self.cli_set(self._base_path + [interface, 'country-code', 'se']) + self.cli_set(self._base_path + [interface, 'type', 'access-point']) # auto-powersave is special - self.session.set(self._base_path + [interface, 'capabilities', 'ht', 'auto-powersave']) + self.cli_set(self._base_path + [interface, 'capabilities', 'ht', 'auto-powersave']) ht_opt = { # VyOS CLI option hostapd - ht_capab setting @@ -88,7 +90,7 @@ class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): 'smps static' : '[SMPS-STATIC]', } for key in ht_opt: - self.session.set(self._base_path + [interface, 'capabilities', 'ht'] + key.split()) + self.cli_set(self._base_path + [interface, 'capabilities', 'ht'] + key.split()) vht_opt = { # VyOS CLI option hostapd - ht_capab setting @@ -105,9 +107,9 @@ class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): 'short-gi 160' : '[SHORT-GI-160]', } for key in vht_opt: - self.session.set(self._base_path + [interface, 'capabilities', 'vht'] + key.split()) + self.cli_set(self._base_path + [interface, 'capabilities', 'vht'] + key.split()) - self.session.commit() + self.cli_commit() # # Validate Config @@ -148,29 +150,29 @@ class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): mode = 'n' country = 'de' - self.session.set(self._base_path + [interface, 'physical-device', phy]) - self.session.set(self._base_path + [interface, 'type', 'access-point']) - self.session.set(self._base_path + [interface, 'mode', mode]) + self.cli_set(self._base_path + [interface, 'physical-device', phy]) + self.cli_set(self._base_path + [interface, 'type', 'access-point']) + self.cli_set(self._base_path + [interface, 'mode', mode]) # SSID must be set with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'ssid', ssid]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'ssid', ssid]) # Channel must be set with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'channel', channel]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'channel', channel]) # Country-Code must be set with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(self._base_path + [interface, 'country-code', country]) + self.cli_commit() + self.cli_set(self._base_path + [interface, 'country-code', country]) - self.session.set(self._base_path + [interface, 'security', 'wpa', 'mode', 'wpa2']) - self.session.set(self._base_path + [interface, 'security', 'wpa', 'passphrase', wpa_key]) + self.cli_set(self._base_path + [interface, 'security', 'wpa', 'mode', 'wpa2']) + self.cli_set(self._base_path + [interface, 'security', 'wpa', 'passphrase', wpa_key]) - self.session.commit() + self.cli_commit() # # Validate Config @@ -211,13 +213,13 @@ class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): # We need a bridge where we can hook our access-point interface to bridge_path = ['interfaces', 'bridge', bridge] - self.session.set(bridge_path + ['member', 'interface', interface]) + self.cli_set(bridge_path + ['member', 'interface', interface]) - self.session.set(self._base_path + [interface, 'ssid', ssid]) - self.session.set(self._base_path + [interface, 'country-code', 'se']) - self.session.set(self._base_path + [interface, 'type', 'access-point']) + self.cli_set(self._base_path + [interface, 'ssid', ssid]) + self.cli_set(self._base_path + [interface, 'country-code', 'se']) + self.cli_set(self._base_path + [interface, 'type', 'access-point']) - self.session.commit() + self.cli_commit() # Check for running process self.assertTrue(process_named_running('hostapd')) @@ -228,9 +230,9 @@ class WirelessInterfaceTest(BasicInterfaceTest.BaseTest): self.assertIn(interface, bridge_members) - self.session.delete(bridge_path) - self.session.delete(self._base_path) - self.session.commit() + self.cli_delete(bridge_path) + self.cli_delete(self._base_path) + self.cli_commit() if __name__ == '__main__': check_kmod('mac80211_hwsim') diff --git a/smoketest/scripts/cli/test_interfaces_wirelessmodem.py b/smoketest/scripts/cli/test_interfaces_wirelessmodem.py index 023f57305..c36835ea7 100755 --- a/smoketest/scripts/cli/test_interfaces_wirelessmodem.py +++ b/smoketest/scripts/cli/test_interfaces_wirelessmodem.py @@ -18,7 +18,10 @@ import os import unittest from psutil import process_iter -from vyos.configsession import ConfigSession, ConfigSessionError +from base_vyostest_shim import VyOSUnitTestSHIM + +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError config_file = '/etc/ppp/peers/{}' base_path = ['interfaces', 'wirelessmodem'] @@ -30,33 +33,31 @@ def get_config_value(interface, key): return list(line.split()) return [] -class WWANInterfaceTest(unittest.TestCase): +class WWANInterfaceTest(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) self._interfaces = ['wlm0', 'wlm1'] def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_wwan(self): for interface in self._interfaces: - self.session.set(base_path + [interface, 'no-peer-dns']) - self.session.set(base_path + [interface, 'connect-on-demand']) + self.cli_set(base_path + [interface, 'no-peer-dns']) + self.cli_set(base_path + [interface, 'connect-on-demand']) # check validate() - APN must be configure with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + [interface, 'apn', 'vyos.net']) + self.cli_commit() + self.cli_set(base_path + [interface, 'apn', 'vyos.net']) # check validate() - device must be configure with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + [interface, 'device', 'ttyS0']) + self.cli_commit() + self.cli_set(base_path + [interface, 'device', 'ttyS0']) # commit changes - self.session.commit() + self.cli_commit() # verify configuration file(s) for interface in self._interfaces: diff --git a/smoketest/scripts/cli/test_nat.py b/smoketest/scripts/cli/test_nat.py index b5702d691..0706f234e 100755 --- a/smoketest/scripts/cli/test_nat.py +++ b/smoketest/scripts/cli/test_nat.py @@ -19,6 +19,7 @@ import jmespath import json import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.util import cmd @@ -28,16 +29,15 @@ base_path = ['nat'] src_path = base_path + ['source'] dst_path = base_path + ['destination'] -class TestNAT(unittest.TestCase): +class TestNAT(VyOSUnitTestSHIM.TestCase): def setUp(self): # ensure we can also run this test on a live system - so lets clean # out the current configuration :) - self.session = ConfigSession(os.getpid()) - self.session.delete(base_path) + self.cli_delete(base_path) def tearDown(self): - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() def test_snat(self): rules = ['100', '110', '120', '130', '200', '210', '220', '230'] @@ -48,15 +48,15 @@ class TestNAT(unittest.TestCase): # depending of rule order we check either for source address for NAT # or configured destination address for NAT if int(rule) < 200: - self.session.set(src_path + ['rule', rule, 'source', 'address', network]) - self.session.set(src_path + ['rule', rule, 'outbound-interface', outbound_iface_100]) - self.session.set(src_path + ['rule', rule, 'translation', 'address', 'masquerade']) + self.cli_set(src_path + ['rule', rule, 'source', 'address', network]) + self.cli_set(src_path + ['rule', rule, 'outbound-interface', outbound_iface_100]) + self.cli_set(src_path + ['rule', rule, 'translation', 'address', 'masquerade']) else: - self.session.set(src_path + ['rule', rule, 'destination', 'address', network]) - self.session.set(src_path + ['rule', rule, 'outbound-interface', outbound_iface_200]) - self.session.set(src_path + ['rule', rule, 'exclude']) + self.cli_set(src_path + ['rule', rule, 'destination', 'address', network]) + self.cli_set(src_path + ['rule', rule, 'outbound-interface', outbound_iface_200]) + self.cli_set(src_path + ['rule', rule, 'exclude']) - self.session.commit() + self.cli_commit() tmp = cmd('sudo nft -j list table nat') data_json = jmespath.search('nftables[?rule].rule[?chain]', json.loads(tmp)) @@ -98,17 +98,17 @@ class TestNAT(unittest.TestCase): for rule in rules: port = f'10{rule}' - self.session.set(dst_path + ['rule', rule, 'source', 'port', port]) - self.session.set(dst_path + ['rule', rule, 'translation', 'address', '192.0.2.1']) - self.session.set(dst_path + ['rule', rule, 'translation', 'port', port]) + self.cli_set(dst_path + ['rule', rule, 'source', 'port', port]) + self.cli_set(dst_path + ['rule', rule, 'translation', 'address', '192.0.2.1']) + self.cli_set(dst_path + ['rule', rule, 'translation', 'port', port]) if int(rule) < 200: - self.session.set(dst_path + ['rule', rule, 'protocol', inbound_proto_100]) - self.session.set(dst_path + ['rule', rule, 'inbound-interface', inbound_iface_100]) + self.cli_set(dst_path + ['rule', rule, 'protocol', inbound_proto_100]) + self.cli_set(dst_path + ['rule', rule, 'inbound-interface', inbound_iface_100]) else: - self.session.set(dst_path + ['rule', rule, 'protocol', inbound_proto_200]) - self.session.set(dst_path + ['rule', rule, 'inbound-interface', inbound_iface_200]) + self.cli_set(dst_path + ['rule', rule, 'protocol', inbound_proto_200]) + self.cli_set(dst_path + ['rule', rule, 'inbound-interface', inbound_iface_200]) - self.session.commit() + self.cli_commit() tmp = cmd('sudo nft -j list table nat') data_json = jmespath.search('nftables[?rule].rule[?chain]', json.loads(tmp)) @@ -141,31 +141,31 @@ class TestNAT(unittest.TestCase): def test_snat_required_translation_address(self): # T2813: Ensure translation address is specified rule = '5' - self.session.set(src_path + ['rule', rule, 'source', 'address', '192.0.2.0/24']) + self.cli_set(src_path + ['rule', rule, 'source', 'address', '192.0.2.0/24']) # check validate() - outbound-interface must be defined with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(src_path + ['rule', rule, 'outbound-interface', 'eth0']) + self.cli_commit() + self.cli_set(src_path + ['rule', rule, 'outbound-interface', 'eth0']) # check validate() - translation address not specified with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() - self.session.set(src_path + ['rule', rule, 'translation', 'address', 'masquerade']) - self.session.commit() + self.cli_set(src_path + ['rule', rule, 'translation', 'address', 'masquerade']) + self.cli_commit() def test_dnat_negated_addresses(self): # T3186: negated addresses are not accepted by nftables rule = '1000' - self.session.set(dst_path + ['rule', rule, 'destination', 'address', '!192.0.2.1']) - self.session.set(dst_path + ['rule', rule, 'destination', 'port', '53']) - self.session.set(dst_path + ['rule', rule, 'inbound-interface', 'eth0']) - self.session.set(dst_path + ['rule', rule, 'protocol', 'tcp_udp']) - self.session.set(dst_path + ['rule', rule, 'source', 'address', '!192.0.2.1']) - self.session.set(dst_path + ['rule', rule, 'translation', 'address', '192.0.2.1']) - self.session.set(dst_path + ['rule', rule, 'translation', 'port', '53']) - self.session.commit() + self.cli_set(dst_path + ['rule', rule, 'destination', 'address', '!192.0.2.1']) + self.cli_set(dst_path + ['rule', rule, 'destination', 'port', '53']) + self.cli_set(dst_path + ['rule', rule, 'inbound-interface', 'eth0']) + self.cli_set(dst_path + ['rule', rule, 'protocol', 'tcp_udp']) + self.cli_set(dst_path + ['rule', rule, 'source', 'address', '!192.0.2.1']) + self.cli_set(dst_path + ['rule', rule, 'translation', 'address', '192.0.2.1']) + self.cli_set(dst_path + ['rule', rule, 'translation', 'port', '53']) + self.cli_commit() def test_nat_no_rules(self): # T3206: deleting all rules but keep the direction 'destination' or @@ -173,9 +173,9 @@ class TestNAT(unittest.TestCase): # # Test that both 'nat destination' and 'nat source' nodes can exist # without any rule - self.session.set(src_path) - self.session.set(dst_path) - self.session.commit() + self.cli_set(src_path) + self.cli_set(dst_path) + self.cli_commit() if __name__ == '__main__': diff --git a/smoketest/scripts/cli/test_nat66.py b/smoketest/scripts/cli/test_nat66.py index 4838fb8d8..dca92c97d 100755 --- a/smoketest/scripts/cli/test_nat66.py +++ b/smoketest/scripts/cli/test_nat66.py @@ -19,6 +19,8 @@ import jmespath import json import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.util import cmd @@ -28,26 +30,25 @@ base_path = ['nat66'] src_path = base_path + ['source'] dst_path = base_path + ['destination'] -class TestNAT66(unittest.TestCase): +class TestNAT66(VyOSUnitTestSHIM.TestCase): def setUp(self): # ensure we can also run this test on a live system - so lets clean # out the current configuration :) - self.session = ConfigSession(os.getpid()) - self.session.delete(base_path) + self.cli_delete(base_path) def tearDown(self): - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() def test_source_nat66(self): source_prefix = 'fc00::/64' translation_prefix = 'fc01::/64' - self.session.set(src_path + ['rule', '1', 'outbound-interface', 'eth1']) - self.session.set(src_path + ['rule', '1', 'source', 'prefix', source_prefix]) - self.session.set(src_path + ['rule', '1', 'translation', 'address', translation_prefix]) + self.cli_set(src_path + ['rule', '1', 'outbound-interface', 'eth1']) + self.cli_set(src_path + ['rule', '1', 'source', 'prefix', source_prefix]) + self.cli_set(src_path + ['rule', '1', 'translation', 'address', translation_prefix]) # check validate() - outbound-interface must be defined - self.session.commit() + self.cli_commit() tmp = cmd('sudo nft -j list table ip6 nat') data_json = jmespath.search('nftables[?rule].rule[?chain]', json.loads(tmp)) @@ -69,16 +70,16 @@ class TestNAT66(unittest.TestCase): # check for translation address self.assertEqual(f'{translation_address}/{translation_mask}', translation_prefix) self.assertEqual(f'{address}/{mask}', source_prefix) - + def test_source_nat66_address(self): source_prefix = 'fc00::/64' translation_address = 'fc00::1' - self.session.set(src_path + ['rule', '1', 'outbound-interface', 'eth1']) - self.session.set(src_path + ['rule', '1', 'source', 'prefix', source_prefix]) - self.session.set(src_path + ['rule', '1', 'translation', 'address', translation_address]) + self.cli_set(src_path + ['rule', '1', 'outbound-interface', 'eth1']) + self.cli_set(src_path + ['rule', '1', 'source', 'prefix', source_prefix]) + self.cli_set(src_path + ['rule', '1', 'translation', 'address', translation_address]) # check validate() - outbound-interface must be defined - self.session.commit() + self.cli_commit() tmp = cmd('sudo nft -j list table ip6 nat') data_json = jmespath.search('nftables[?rule].rule[?chain]', json.loads(tmp)) @@ -99,16 +100,16 @@ class TestNAT66(unittest.TestCase): # check for translation address self.assertEqual(snat_address, translation_address) self.assertEqual(f'{address}/{mask}', source_prefix) - + def test_destination_nat66(self): destination_address = 'fc00::1' translation_address = 'fc01::1' - self.session.set(dst_path + ['rule', '1', 'inbound-interface', 'eth1']) - self.session.set(dst_path + ['rule', '1', 'destination', 'address', destination_address]) - self.session.set(dst_path + ['rule', '1', 'translation', 'address', translation_address]) + self.cli_set(dst_path + ['rule', '1', 'inbound-interface', 'eth1']) + self.cli_set(dst_path + ['rule', '1', 'destination', 'address', destination_address]) + self.cli_set(dst_path + ['rule', '1', 'translation', 'address', translation_address]) # check validate() - outbound-interface must be defined - self.session.commit() + self.cli_commit() tmp = cmd('sudo nft -j list table ip6 nat') data_json = jmespath.search('nftables[?rule].rule[?chain]', json.loads(tmp)) @@ -125,16 +126,16 @@ class TestNAT66(unittest.TestCase): self.assertEqual(dnat_addr, translation_address) self.assertEqual(iface, 'eth1') - + def test_destination_nat66_prefix(self): destination_prefix = 'fc00::/64' translation_prefix = 'fc01::/64' - self.session.set(dst_path + ['rule', '1', 'inbound-interface', 'eth1']) - self.session.set(dst_path + ['rule', '1', 'destination', 'address', destination_prefix]) - self.session.set(dst_path + ['rule', '1', 'translation', 'address', translation_prefix]) + self.cli_set(dst_path + ['rule', '1', 'inbound-interface', 'eth1']) + self.cli_set(dst_path + ['rule', '1', 'destination', 'address', destination_prefix]) + self.cli_set(dst_path + ['rule', '1', 'translation', 'address', translation_prefix]) # check validate() - outbound-interface must be defined - self.session.commit() + self.cli_commit() tmp = cmd('sudo nft -j list table ip6 nat') data_json = jmespath.search('nftables[?rule].rule[?chain]', json.loads(tmp)) @@ -157,19 +158,19 @@ class TestNAT66(unittest.TestCase): # T2813: Ensure translation address is specified rule = '5' source_prefix = 'fc00::/64' - self.session.set(src_path + ['rule', rule, 'source', 'prefix', source_prefix]) + self.cli_set(src_path + ['rule', rule, 'source', 'prefix', source_prefix]) # check validate() - outbound-interface must be defined with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(src_path + ['rule', rule, 'outbound-interface', 'eth0']) + self.cli_commit() + self.cli_set(src_path + ['rule', rule, 'outbound-interface', 'eth0']) # check validate() - translation address not specified with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() - self.session.set(src_path + ['rule', rule, 'translation', 'address', 'masquerade']) - self.session.commit() + self.cli_set(src_path + ['rule', rule, 'translation', 'address', 'masquerade']) + self.cli_commit() def test_nat66_no_rules(self): # T3206: deleting all rules but keep the direction 'destination' or @@ -177,9 +178,9 @@ class TestNAT66(unittest.TestCase): # # Test that both 'nat destination' and 'nat source' nodes can exist # without any rule - self.session.set(src_path) - self.session.set(dst_path) - self.session.commit() + self.cli_set(src_path) + self.cli_set(dst_path) + self.cli_commit() if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_policy.py b/smoketest/scripts/cli/test_policy.py index 8efbab7e5..57557af68 100755 --- a/smoketest/scripts/cli/test_policy.py +++ b/smoketest/scripts/cli/test_policy.py @@ -14,26 +14,20 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest -from vyos.util import cmd +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError +from vyos.util import cmd base_path = ['policy'] -def getFRRconfig(section): - return cmd(f'vtysh -c "show run" | sed -n "/^{section}/,/^!/p"') - -class TestPolicy(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestPolicy(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_access_list(self): acls = { @@ -101,25 +95,25 @@ class TestPolicy(unittest.TestCase): for acl, acl_config in acls.items(): path = base_path + ['access-list', acl] - self.session.set(path + ['description', f'VyOS-ACL-{acl}']) + self.cli_set(path + ['description', f'VyOS-ACL-{acl}']) if 'rule' not in acl_config: continue for rule, rule_config in acl_config['rule'].items(): - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) for direction in ['source', 'destination']: if direction in rule_config: if 'any' in rule_config[direction]: - self.session.set(path + ['rule', rule, direction, 'any']) + self.cli_set(path + ['rule', rule, direction, 'any']) if 'host' in rule_config[direction]: - self.session.set(path + ['rule', rule, direction, 'host', rule_config[direction]['host']]) + self.cli_set(path + ['rule', rule, direction, 'host', rule_config[direction]['host']]) if 'network' in rule_config[direction]: - self.session.set(path + ['rule', rule, direction, 'network', rule_config[direction]['network']]) - self.session.set(path + ['rule', rule, direction, 'inverse-mask', rule_config[direction]['inverse-mask']]) + self.cli_set(path + ['rule', rule, direction, 'network', rule_config[direction]['network']]) + self.cli_set(path + ['rule', rule, direction, 'inverse-mask', rule_config[direction]['inverse-mask']]) - self.session.commit() + self.cli_commit() - config = getFRRconfig('access-list') + config = self.getFRRconfig('access-list', end='') for acl, acl_config in acls.items(): seq = '5' for rule, rule_config in acl_config['rule'].items(): @@ -190,24 +184,24 @@ class TestPolicy(unittest.TestCase): for acl, acl_config in acls.items(): path = base_path + ['access-list6', acl] - self.session.set(path + ['description', f'VyOS-ACL-{acl}']) + self.cli_set(path + ['description', f'VyOS-ACL-{acl}']) if 'rule' not in acl_config: continue for rule, rule_config in acl_config['rule'].items(): - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) for direction in ['source', 'destination']: if direction in rule_config: if 'any' in rule_config[direction]: - self.session.set(path + ['rule', rule, direction, 'any']) + self.cli_set(path + ['rule', rule, direction, 'any']) if 'network' in rule_config[direction]: - self.session.set(path + ['rule', rule, direction, 'network', rule_config[direction]['network']]) + self.cli_set(path + ['rule', rule, direction, 'network', rule_config[direction]['network']]) if 'exact-match' in rule_config[direction]: - self.session.set(path + ['rule', rule, direction, 'exact-match']) + self.cli_set(path + ['rule', rule, direction, 'exact-match']) - self.session.commit() + self.cli_commit() - config = getFRRconfig('ipv6 access-list') + config = self.getFRRconfig('ipv6 access-list', end='') for acl, acl_config in acls.items(): seq = '5' for rule, rule_config in acl_config['rule'].items(): @@ -295,19 +289,19 @@ class TestPolicy(unittest.TestCase): for as_path, as_path_config in test_data.items(): path = base_path + ['as-path-list', as_path] - self.session.set(path + ['description', f'VyOS-ASPATH-{as_path}']) + self.cli_set(path + ['description', f'VyOS-ASPATH-{as_path}']) if 'rule' not in as_path_config: continue for rule, rule_config in as_path_config['rule'].items(): if 'action' in rule_config: - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) if 'regex' in rule_config: - self.session.set(path + ['rule', rule, 'regex', rule_config['regex']]) + self.cli_set(path + ['rule', rule, 'regex', rule_config['regex']]) - self.session.commit() + self.cli_commit() - config = getFRRconfig('bgp as-path access-list') + config = self.getFRRconfig('bgp as-path access-list', end='') for as_path, as_path_config in test_data.items(): if 'rule' not in as_path_config: continue @@ -353,19 +347,19 @@ class TestPolicy(unittest.TestCase): for comm_list, comm_list_config in test_data.items(): path = base_path + ['community-list', comm_list] - self.session.set(path + ['description', f'VyOS-COMM-{comm_list}']) + self.cli_set(path + ['description', f'VyOS-COMM-{comm_list}']) if 'rule' not in comm_list_config: continue for rule, rule_config in comm_list_config['rule'].items(): if 'action' in rule_config: - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) if 'regex' in rule_config: - self.session.set(path + ['rule', rule, 'regex', rule_config['regex']]) + self.cli_set(path + ['rule', rule, 'regex', rule_config['regex']]) - self.session.commit() + self.cli_commit() - config = getFRRconfig('bgp community-list') + config = self.getFRRconfig('bgp community-list', end='') for comm_list, comm_list_config in test_data.items(): if 'rule' not in comm_list_config: continue @@ -413,19 +407,19 @@ class TestPolicy(unittest.TestCase): for comm_list, comm_list_config in test_data.items(): path = base_path + ['extcommunity-list', comm_list] - self.session.set(path + ['description', f'VyOS-EXTCOMM-{comm_list}']) + self.cli_set(path + ['description', f'VyOS-EXTCOMM-{comm_list}']) if 'rule' not in comm_list_config: continue for rule, rule_config in comm_list_config['rule'].items(): if 'action' in rule_config: - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) if 'regex' in rule_config: - self.session.set(path + ['rule', rule, 'regex', rule_config['regex']]) + self.cli_set(path + ['rule', rule, 'regex', rule_config['regex']]) - self.session.commit() + self.cli_commit() - config = getFRRconfig('bgp extcommunity-list') + config = self.getFRRconfig('bgp extcommunity-list', end='') for comm_list, comm_list_config in test_data.items(): if 'rule' not in comm_list_config: continue @@ -480,19 +474,19 @@ class TestPolicy(unittest.TestCase): for comm_list, comm_list_config in test_data.items(): path = base_path + ['large-community-list', comm_list] - self.session.set(path + ['description', f'VyOS-LARGECOMM-{comm_list}']) + self.cli_set(path + ['description', f'VyOS-LARGECOMM-{comm_list}']) if 'rule' not in comm_list_config: continue for rule, rule_config in comm_list_config['rule'].items(): if 'action' in rule_config: - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) if 'regex' in rule_config: - self.session.set(path + ['rule', rule, 'regex', rule_config['regex']]) + self.cli_set(path + ['rule', rule, 'regex', rule_config['regex']]) - self.session.commit() + self.cli_commit() - config = getFRRconfig('bgp large-community-list') + config = self.getFRRconfig('bgp large-community-list', end='') for comm_list, comm_list_config in test_data.items(): if 'rule' not in comm_list_config: continue @@ -556,23 +550,23 @@ class TestPolicy(unittest.TestCase): for prefix_list, prefix_list_config in test_data.items(): path = base_path + ['prefix-list', prefix_list] - self.session.set(path + ['description', f'VyOS-PFX-LIST-{prefix_list}']) + self.cli_set(path + ['description', f'VyOS-PFX-LIST-{prefix_list}']) if 'rule' not in prefix_list_config: continue for rule, rule_config in prefix_list_config['rule'].items(): if 'action' in rule_config: - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) if 'prefix' in rule_config: - self.session.set(path + ['rule', rule, 'prefix', rule_config['prefix']]) + self.cli_set(path + ['rule', rule, 'prefix', rule_config['prefix']]) if 'ge' in rule_config: - self.session.set(path + ['rule', rule, 'ge', rule_config['ge']]) + self.cli_set(path + ['rule', rule, 'ge', rule_config['ge']]) if 'le' in rule_config: - self.session.set(path + ['rule', rule, 'le', rule_config['le']]) + self.cli_set(path + ['rule', rule, 'le', rule_config['le']]) - self.session.commit() + self.cli_commit() - config = getFRRconfig('ip prefix-list') + config = self.getFRRconfig('ip prefix-list', end='') for prefix_list, prefix_list_config in test_data.items(): if 'rule' not in prefix_list_config: continue @@ -639,23 +633,23 @@ class TestPolicy(unittest.TestCase): for prefix_list, prefix_list_config in test_data.items(): path = base_path + ['prefix-list6', prefix_list] - self.session.set(path + ['description', f'VyOS-PFX-LIST-{prefix_list}']) + self.cli_set(path + ['description', f'VyOS-PFX-LIST-{prefix_list}']) if 'rule' not in prefix_list_config: continue for rule, rule_config in prefix_list_config['rule'].items(): if 'action' in rule_config: - self.session.set(path + ['rule', rule, 'action', rule_config['action']]) + self.cli_set(path + ['rule', rule, 'action', rule_config['action']]) if 'prefix' in rule_config: - self.session.set(path + ['rule', rule, 'prefix', rule_config['prefix']]) + self.cli_set(path + ['rule', rule, 'prefix', rule_config['prefix']]) if 'ge' in rule_config: - self.session.set(path + ['rule', rule, 'ge', rule_config['ge']]) + self.cli_set(path + ['rule', rule, 'ge', rule_config['ge']]) if 'le' in rule_config: - self.session.set(path + ['rule', rule, 'le', rule_config['le']]) + self.cli_set(path + ['rule', rule, 'le', rule_config['le']]) - self.session.commit() + self.cli_commit() - config = getFRRconfig('ipv6 prefix-list') + config = self.getFRRconfig('ipv6 prefix-list', end='') for prefix_list, prefix_list_config in test_data.items(): if 'rule' not in prefix_list_config: continue @@ -677,5 +671,32 @@ class TestPolicy(unittest.TestCase): self.assertIn(tmp, config) + + # Test set table for some sources + def test_table_id(self): + path = base_path + ['local-route'] + + sources = ['203.0.113.1', '203.0.113.2'] + rule = '50' + table = '23' + for src in sources: + self.cli_set(path + ['rule', rule, 'set', 'table', table]) + self.cli_set(path + ['rule', rule, 'source', src]) + + self.cli_commit() + + # Check generated configuration + + # Expected values + original = """ + 50: from 203.0.113.1 lookup 23 + 50: from 203.0.113.2 lookup 23 + """ + tmp = cmd('ip rule show prio 50') + original = original.split() + tmp = tmp.split() + + self.assertEqual(tmp, original) + if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_policy_local-route.py b/smoketest/scripts/cli/test_policy_local-route.py deleted file mode 100755 index de1882a65..000000000 --- a/smoketest/scripts/cli/test_policy_local-route.py +++ /dev/null @@ -1,61 +0,0 @@ -#!/usr/bin/env python3 -# -# Copyright (C) 2020 VyOS maintainers and contributors -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 or later as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -import os -import unittest - -from vyos.configsession import ConfigSession -from vyos.configsession import ConfigSessionError -from vyos.util import cmd -from vyos.util import process_named_running - -class PolicyLocalRouteTest(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - self._sources = ['203.0.113.1', '203.0.113.2'] - - def tearDown(self): - # Delete all policies - self.session.delete(['policy', 'local-route']) - self.session.commit() - del self.session - - # Test set table for some sources - def test_table_id(self): - base = ['policy', 'local-route'] - rule = '50' - table = '23' - for src in self._sources: - self.session.set(base + ['rule', rule, 'set', 'table', table]) - self.session.set(base + ['rule', rule, 'source', src]) - - self.session.commit() - - # Check generated configuration - - # Expected values - original = """ - 50: from 203.0.113.1 lookup 23 - 50: from 203.0.113.2 lookup 23 - """ - tmp = cmd('ip rule show prio 50') - original = original.split() - tmp = tmp.split() - - self.assertEqual(tmp, original) - -if __name__ == '__main__': - unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_protocols_bfd.py b/smoketest/scripts/cli/test_protocols_bfd.py index 80e5daa7c..acc88f596 100755 --- a/smoketest/scripts/cli/test_protocols_bfd.py +++ b/smoketest/scripts/cli/test_protocols_bfd.py @@ -14,12 +14,11 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError -from vyos.util import cmd from vyos.util import process_named_running PROCESS_NAME = 'bfdd' @@ -67,53 +66,39 @@ profiles = { }, } -def getFRRconfig(): - return cmd('vtysh -c "show run" | sed -n "/^bfd/,/^!/p"') - -def getBFDPeerconfig(peer): - return cmd(f'vtysh -c "show run" | sed -n "/^ {peer}/,/^!/p"') - -def getBFDProfileconfig(profile): - return cmd(f'vtysh -c "show run" | sed -n "/^ {profile}/,/^!/p"') - -class TestProtocolsBFD(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestProtocolsBFD(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session - + self.cli_delete(base_path) + self.cli_commit() # Check for running process self.assertTrue(process_named_running(PROCESS_NAME)) def test_bfd_peer(self): for peer, peer_config in peers.items(): if 'echo_mode' in peer_config: - self.session.set(base_path + ['peer', peer, 'echo-mode']) + self.cli_set(base_path + ['peer', peer, 'echo-mode']) if 'intv_echo' in peer_config: - self.session.set(base_path + ['peer', peer, 'interval', 'echo-interval', peer_config["intv_echo"]]) + self.cli_set(base_path + ['peer', peer, 'interval', 'echo-interval', peer_config["intv_echo"]]) if 'intv_mult' in peer_config: - self.session.set(base_path + ['peer', peer, 'interval', 'multiplier', peer_config["intv_mult"]]) + self.cli_set(base_path + ['peer', peer, 'interval', 'multiplier', peer_config["intv_mult"]]) if 'intv_rx' in peer_config: - self.session.set(base_path + ['peer', peer, 'interval', 'receive', peer_config["intv_rx"]]) + self.cli_set(base_path + ['peer', peer, 'interval', 'receive', peer_config["intv_rx"]]) if 'intv_tx' in peer_config: - self.session.set(base_path + ['peer', peer, 'interval', 'transmit', peer_config["intv_tx"]]) + self.cli_set(base_path + ['peer', peer, 'interval', 'transmit', peer_config["intv_tx"]]) if 'multihop' in peer_config: - self.session.set(base_path + ['peer', peer, 'multihop']) + self.cli_set(base_path + ['peer', peer, 'multihop']) if 'shutdown' in peer_config: - self.session.set(base_path + ['peer', peer, 'shutdown']) + self.cli_set(base_path + ['peer', peer, 'shutdown']) if 'source_addr' in peer_config: - self.session.set(base_path + ['peer', peer, 'source', 'address', peer_config["source_addr"]]) + self.cli_set(base_path + ['peer', peer, 'source', 'address', peer_config["source_addr"]]) if 'source_intf' in peer_config: - self.session.set(base_path + ['peer', peer, 'source', 'interface', peer_config["source_intf"]]) + self.cli_set(base_path + ['peer', peer, 'source', 'interface', peer_config["source_intf"]]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRconfig() + frrconfig = self.getFRRconfig('bfd') for peer, peer_config in peers.items(): tmp = f'peer {peer}' if 'multihop' in peer_config: @@ -124,7 +109,7 @@ class TestProtocolsBFD(unittest.TestCase): tmp += f' interface {peer_config["source_intf"]}' self.assertIn(tmp, frrconfig) - peerconfig = getBFDPeerconfig(tmp) + peerconfig = self.getFRRconfig(f' peer {peer}', end='') if 'echo_mode' in peer_config: self.assertIn(f' echo-mode', peerconfig) @@ -141,29 +126,30 @@ class TestProtocolsBFD(unittest.TestCase): def test_bfd_profile(self): peer = '192.0.2.10' + self.debug = True for profile, profile_config in profiles.items(): if 'echo_mode' in profile_config: - self.session.set(base_path + ['profile', profile, 'echo-mode']) + self.cli_set(base_path + ['profile', profile, 'echo-mode']) if 'intv_echo' in profile_config: - self.session.set(base_path + ['profile', profile, 'interval', 'echo-interval', profile_config["intv_echo"]]) + self.cli_set(base_path + ['profile', profile, 'interval', 'echo-interval', profile_config["intv_echo"]]) if 'intv_mult' in profile_config: - self.session.set(base_path + ['profile', profile, 'interval', 'multiplier', profile_config["intv_mult"]]) + self.cli_set(base_path + ['profile', profile, 'interval', 'multiplier', profile_config["intv_mult"]]) if 'intv_rx' in profile_config: - self.session.set(base_path + ['profile', profile, 'interval', 'receive', profile_config["intv_rx"]]) + self.cli_set(base_path + ['profile', profile, 'interval', 'receive', profile_config["intv_rx"]]) if 'intv_tx' in profile_config: - self.session.set(base_path + ['profile', profile, 'interval', 'transmit', profile_config["intv_tx"]]) + self.cli_set(base_path + ['profile', profile, 'interval', 'transmit', profile_config["intv_tx"]]) if 'shutdown' in profile_config: - self.session.set(base_path + ['profile', profile, 'shutdown']) + self.cli_set(base_path + ['profile', profile, 'shutdown']) - self.session.set(base_path + ['peer', peer, 'profile', list(profiles)[0]]) + self.cli_set(base_path + ['peer', peer, 'profile', list(profiles)[0]]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration for profile, profile_config in profiles.items(): - config = getBFDProfileconfig(f'profile {profile}') + config = self.getFRRconfig(f' profile {profile}', end='') if 'echo_mode' in profile_config: self.assertIn(f' echo-mode', config) if 'intv_echo' in profile_config: diff --git a/smoketest/scripts/cli/test_protocols_bgp.py b/smoketest/scripts/cli/test_protocols_bgp.py index 9aa1541cf..be99a0960 100755 --- a/smoketest/scripts/cli/test_protocols_bgp.py +++ b/smoketest/scripts/cli/test_protocols_bgp.py @@ -14,13 +14,12 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest -from vyos.configsession import ConfigSession +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSessionError from vyos.template import is_ipv6 -from vyos.util import cmd from vyos.util import process_named_running PROCESS_NAME = 'bgpd' @@ -128,45 +127,31 @@ peer_group_config = { }, } -def getFRRBGPconfig(): - return cmd(f'vtysh -c "show run" | sed -n "/^router bgp {ASN}/,/^!/p"') - -def getFRRBgpAfiConfig(afi): - return cmd(f'vtysh -c "show run" | sed -n "/^router bgp {ASN}/,/^!/p" | sed -n "/^ address-family {afi} unicast/,/^ exit-address-family/p"') - -def getFRRBGPVNIconfig(vni): - return cmd(f'vtysh -c "show run" | sed -n "/^ vni {vni}/,/^!/p"') - -def getFRRRPKIconfig(): - return cmd(f'vtysh -c "show run" | sed -n "/^rpki/,/^!/p"') -class TestProtocolsBGP(unittest.TestCase): +class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - - self.session.set(['policy', 'route-map', route_map_in, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'route-map', route_map_out, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'prefix', '192.0.2.0/25']) - self.session.set(['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'prefix', '192.0.2.128/25']) - - self.session.set(['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'prefix', '2001:db8:1000::/64']) - self.session.set(['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'action', 'deny']) - self.session.set(['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'prefix', '2001:db8:2000::/64']) + self.cli_set(['policy', 'route-map', route_map_in, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'route-map', route_map_out, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'prefix', '192.0.2.0/25']) + self.cli_set(['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'prefix', '192.0.2.128/25']) + + self.cli_set(['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'prefix', '2001:db8:1000::/64']) + self.cli_set(['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'action', 'deny']) + self.cli_set(['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'prefix', '2001:db8:2000::/64']) def tearDown(self): - self.session.delete(['policy', 'route-map', route_map_in]) - self.session.delete(['policy', 'route-map', route_map_out]) - self.session.delete(['policy', 'prefix-list', prefix_list_in]) - self.session.delete(['policy', 'prefix-list', prefix_list_out]) - self.session.delete(['policy', 'prefix-list6', prefix_list_in6]) - self.session.delete(['policy', 'prefix-list6', prefix_list_out6]) + self.cli_delete(['policy', 'route-map', route_map_in]) + self.cli_delete(['policy', 'route-map', route_map_out]) + self.cli_delete(['policy', 'prefix-list', prefix_list_in]) + self.cli_delete(['policy', 'prefix-list', prefix_list_out]) + self.cli_delete(['policy', 'prefix-list6', prefix_list_in6]) + self.cli_delete(['policy', 'prefix-list6', prefix_list_out6]) - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() # Check for running process self.assertTrue(process_named_running(PROCESS_NAME)) @@ -226,27 +211,27 @@ class TestProtocolsBGP(unittest.TestCase): max_path_v6 = '8' max_path_v6ibgp = '16' - self.session.set(base_path + ['parameters', 'router-id', router_id]) - self.session.set(base_path + ['parameters', 'log-neighbor-changes']) + self.cli_set(base_path + ['parameters', 'router-id', router_id]) + self.cli_set(base_path + ['parameters', 'log-neighbor-changes']) # Default local preference (higher = more preferred, default value is 100) - self.session.set(base_path + ['parameters', 'default', 'local-pref', local_pref]) + self.cli_set(base_path + ['parameters', 'default', 'local-pref', local_pref]) # Deactivate IPv4 unicast for a peer by default - self.session.set(base_path + ['parameters', 'default', 'no-ipv4-unicast']) - self.session.set(base_path + ['parameters', 'graceful-restart', 'stalepath-time', stalepath_time]) - self.session.set(base_path + ['parameters', 'graceful-shutdown']) - self.session.set(base_path + ['parameters', 'ebgp-requires-policy']) + self.cli_set(base_path + ['parameters', 'default', 'no-ipv4-unicast']) + self.cli_set(base_path + ['parameters', 'graceful-restart', 'stalepath-time', stalepath_time]) + self.cli_set(base_path + ['parameters', 'graceful-shutdown']) + self.cli_set(base_path + ['parameters', 'ebgp-requires-policy']) # AFI maximum path support - self.session.set(base_path + ['address-family', 'ipv4-unicast', 'maximum-paths', 'ebgp', max_path_v4]) - self.session.set(base_path + ['address-family', 'ipv4-unicast', 'maximum-paths', 'ibgp', max_path_v4ibgp]) - self.session.set(base_path + ['address-family', 'ipv6-unicast', 'maximum-paths', 'ebgp', max_path_v6]) - self.session.set(base_path + ['address-family', 'ipv6-unicast', 'maximum-paths', 'ibgp', max_path_v6ibgp]) + self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'maximum-paths', 'ebgp', max_path_v4]) + self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'maximum-paths', 'ibgp', max_path_v4ibgp]) + self.cli_set(base_path + ['address-family', 'ipv6-unicast', 'maximum-paths', 'ebgp', max_path_v6]) + self.cli_set(base_path + ['address-family', 'ipv6-unicast', 'maximum-paths', 'ibgp', max_path_v6ibgp]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRBGPconfig() + frrconfig = self.getFRRconfig(f'router bgp {ASN}') self.assertIn(f'router bgp {ASN}', frrconfig) self.assertIn(f' bgp router-id {router_id}', frrconfig) self.assertIn(f' bgp log-neighbor-changes', frrconfig) @@ -256,11 +241,11 @@ class TestProtocolsBGP(unittest.TestCase): self.assertIn(f' bgp graceful-shutdown', frrconfig) self.assertNotIn(f'bgp ebgp-requires-policy', frrconfig) - afiv4_config = getFRRBgpAfiConfig('ipv4') + afiv4_config = self.getFRRconfig(' address-family ipv4 unicast') self.assertIn(f' maximum-paths {max_path_v4}', afiv4_config) self.assertIn(f' maximum-paths ibgp {max_path_v4ibgp}', afiv4_config) - afiv6_config = getFRRBgpAfiConfig('ipv6') + afiv6_config = self.getFRRconfig(' address-family ipv6 unicast') self.assertIn(f' maximum-paths {max_path_v6}', afiv6_config) self.assertIn(f' maximum-paths ibgp {max_path_v6ibgp}', afiv6_config) @@ -274,59 +259,59 @@ class TestProtocolsBGP(unittest.TestCase): afi = 'ipv6-unicast' if 'adv_interv' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'advertisement-interval', peer_config["adv_interv"]]) + self.cli_set(base_path + ['neighbor', peer, 'advertisement-interval', peer_config["adv_interv"]]) if 'cap_dynamic' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'capability', 'dynamic']) + self.cli_set(base_path + ['neighbor', peer, 'capability', 'dynamic']) if 'cap_ext_next' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'capability', 'extended-nexthop']) + self.cli_set(base_path + ['neighbor', peer, 'capability', 'extended-nexthop']) if 'description' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'description', peer_config["description"]]) + self.cli_set(base_path + ['neighbor', peer, 'description', peer_config["description"]]) if 'no_cap_nego' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'disable-capability-negotiation']) + self.cli_set(base_path + ['neighbor', peer, 'disable-capability-negotiation']) if 'multi_hop' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'ebgp-multihop', peer_config["multi_hop"]]) + self.cli_set(base_path + ['neighbor', peer, 'ebgp-multihop', peer_config["multi_hop"]]) if 'local_as' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'local-as', peer_config["local_as"]]) + self.cli_set(base_path + ['neighbor', peer, 'local-as', peer_config["local_as"]]) if 'cap_over' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'override-capability']) + self.cli_set(base_path + ['neighbor', peer, 'override-capability']) if 'passive' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'passive']) + self.cli_set(base_path + ['neighbor', peer, 'passive']) if 'password' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'password', peer_config["password"]]) + self.cli_set(base_path + ['neighbor', peer, 'password', peer_config["password"]]) if 'port' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'port', peer_config["port"]]) + self.cli_set(base_path + ['neighbor', peer, 'port', peer_config["port"]]) if 'remote_as' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'remote-as', peer_config["remote_as"]]) + self.cli_set(base_path + ['neighbor', peer, 'remote-as', peer_config["remote_as"]]) if 'cap_strict' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'strict-capability-match']) + self.cli_set(base_path + ['neighbor', peer, 'strict-capability-match']) if 'shutdown' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'shutdown']) + self.cli_set(base_path + ['neighbor', peer, 'shutdown']) if 'ttl_security' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'ttl-security', 'hops', peer_config["ttl_security"]]) + self.cli_set(base_path + ['neighbor', peer, 'ttl-security', 'hops', peer_config["ttl_security"]]) if 'update_src' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'update-source', peer_config["update_src"]]) + self.cli_set(base_path + ['neighbor', peer, 'update-source', peer_config["update_src"]]) if 'route_map_in' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'route-map', 'import', peer_config["route_map_in"]]) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'route-map', 'import', peer_config["route_map_in"]]) if 'route_map_out' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'route-map', 'export', peer_config["route_map_out"]]) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'route-map', 'export', peer_config["route_map_out"]]) if 'pfx_list_in' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'prefix-list', 'import', peer_config["pfx_list_in"]]) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'prefix-list', 'import', peer_config["pfx_list_in"]]) if 'pfx_list_out' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'prefix-list', 'export', peer_config["pfx_list_out"]]) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'prefix-list', 'export', peer_config["pfx_list_out"]]) if 'no_send_comm_std' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'disable-send-community', 'standard']) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'disable-send-community', 'standard']) if 'no_send_comm_ext' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'disable-send-community', 'extended']) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'disable-send-community', 'extended']) if 'addpath_all' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'addpath-tx-all']) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'addpath-tx-all']) if 'addpath_per_as' in peer_config: - self.session.set(base_path + ['neighbor', peer, 'address-family', afi, 'addpath-tx-per-as']) + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'addpath-tx-per-as']) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRBGPconfig() + frrconfig = self.getFRRconfig(f'router bgp {ASN}') self.assertIn(f'router bgp {ASN}', frrconfig) for peer, peer_config in neighbor_config.items(): @@ -343,53 +328,53 @@ class TestProtocolsBGP(unittest.TestCase): # Test out individual peer-group configuration items for peer_group, config in peer_group_config.items(): if 'cap_dynamic' in config: - self.session.set(base_path + ['peer-group', peer_group, 'capability', 'dynamic']) + self.cli_set(base_path + ['peer-group', peer_group, 'capability', 'dynamic']) if 'cap_ext_next' in config: - self.session.set(base_path + ['peer-group', peer_group, 'capability', 'extended-nexthop']) + self.cli_set(base_path + ['peer-group', peer_group, 'capability', 'extended-nexthop']) if 'description' in config: - self.session.set(base_path + ['peer-group', peer_group, 'description', config["description"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'description', config["description"]]) if 'no_cap_nego' in config: - self.session.set(base_path + ['peer-group', peer_group, 'disable-capability-negotiation']) + self.cli_set(base_path + ['peer-group', peer_group, 'disable-capability-negotiation']) if 'multi_hop' in config: - self.session.set(base_path + ['peer-group', peer_group, 'ebgp-multihop', config["multi_hop"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'ebgp-multihop', config["multi_hop"]]) if 'local_as' in config: - self.session.set(base_path + ['peer-group', peer_group, 'local-as', config["local_as"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'local-as', config["local_as"]]) if 'cap_over' in config: - self.session.set(base_path + ['peer-group', peer_group, 'override-capability']) + self.cli_set(base_path + ['peer-group', peer_group, 'override-capability']) if 'passive' in config: - self.session.set(base_path + ['peer-group', peer_group, 'passive']) + self.cli_set(base_path + ['peer-group', peer_group, 'passive']) if 'password' in config: - self.session.set(base_path + ['peer-group', peer_group, 'password', config["password"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'password', config["password"]]) if 'remote_as' in config: - self.session.set(base_path + ['peer-group', peer_group, 'remote-as', config["remote_as"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'remote-as', config["remote_as"]]) if 'shutdown' in config: - self.session.set(base_path + ['peer-group', peer_group, 'shutdown']) + self.cli_set(base_path + ['peer-group', peer_group, 'shutdown']) if 'ttl_security' in config: - self.session.set(base_path + ['peer-group', peer_group, 'ttl-security', 'hops', config["ttl_security"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'ttl-security', 'hops', config["ttl_security"]]) if 'update_src' in config: - self.session.set(base_path + ['peer-group', peer_group, 'update-source', config["update_src"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'update-source', config["update_src"]]) if 'route_map_in' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'route-map', 'import', config["route_map_in"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'route-map', 'import', config["route_map_in"]]) if 'route_map_out' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'route-map', 'export', config["route_map_out"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'route-map', 'export', config["route_map_out"]]) if 'pfx_list_in' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'prefix-list', 'import', config["pfx_list_in"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'prefix-list', 'import', config["pfx_list_in"]]) if 'pfx_list_out' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'prefix-list', 'export', config["pfx_list_out"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'prefix-list', 'export', config["pfx_list_out"]]) if 'no_send_comm_std' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'disable-send-community', 'standard']) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'disable-send-community', 'standard']) if 'no_send_comm_ext' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'disable-send-community', 'extended']) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'disable-send-community', 'extended']) if 'addpath_all' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'addpath-tx-all']) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'addpath-tx-all']) if 'addpath_per_as' in config: - self.session.set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'addpath-tx-per-as']) + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'addpath-tx-per-as']) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRBGPconfig() + frrconfig = self.getFRRconfig(f'router bgp {ASN}') self.assertIn(f'router bgp {ASN}', frrconfig) for peer, peer_config in peer_group_config.items(): @@ -413,24 +398,24 @@ class TestProtocolsBGP(unittest.TestCase): # We want to redistribute ... redistributes = ['connected', 'isis', 'kernel', 'ospf', 'rip', 'static'] for redistribute in redistributes: - self.session.set(base_path + ['address-family', 'ipv4-unicast', + self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'redistribute', redistribute]) for network, network_config in networks.items(): - self.session.set(base_path + ['address-family', 'ipv4-unicast', + self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'network', network]) if 'as_set' in network_config: - self.session.set(base_path + ['address-family', 'ipv4-unicast', + self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'aggregate-address', network, 'as-set']) if 'summary_only' in network_config: - self.session.set(base_path + ['address-family', 'ipv4-unicast', + self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'aggregate-address', network, 'summary-only']) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRBGPconfig() + frrconfig = self.getFRRconfig(f'router bgp {ASN}') self.assertIn(f'router bgp {ASN}', frrconfig) self.assertIn(f' address-family ipv4 unicast', frrconfig) @@ -459,21 +444,21 @@ class TestProtocolsBGP(unittest.TestCase): # We want to redistribute ... redistributes = ['connected', 'kernel', 'ospfv3', 'ripng', 'static'] for redistribute in redistributes: - self.session.set(base_path + ['address-family', 'ipv6-unicast', + self.cli_set(base_path + ['address-family', 'ipv6-unicast', 'redistribute', redistribute]) for network, network_config in networks.items(): - self.session.set(base_path + ['address-family', 'ipv6-unicast', + self.cli_set(base_path + ['address-family', 'ipv6-unicast', 'network', network]) if 'summary_only' in network_config: - self.session.set(base_path + ['address-family', 'ipv6-unicast', + self.cli_set(base_path + ['address-family', 'ipv6-unicast', 'aggregate-address', network, 'summary-only']) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRBGPconfig() + frrconfig = self.getFRRconfig(f'router bgp {ASN}') self.assertIn(f'router bgp {ASN}', frrconfig) self.assertIn(f' address-family ipv6 unicast', frrconfig) # T2100: By default ebgp-requires-policy is disabled to keep VyOS @@ -497,24 +482,24 @@ class TestProtocolsBGP(unittest.TestCase): limit = '64' listen_ranges = ['192.0.2.0/25', '192.0.2.128/25'] peer_group = 'listenfoobar' - self.session.set(base_path + ['listen', 'limit', limit]) + self.cli_set(base_path + ['listen', 'limit', limit]) for prefix in listen_ranges: - self.session.set(base_path + ['listen', 'range', prefix]) + self.cli_set(base_path + ['listen', 'range', prefix]) # check validate() - peer-group must be defined for range/prefix with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['listen', 'range', prefix, 'peer-group', peer_group]) + self.cli_commit() + self.cli_set(base_path + ['listen', 'range', prefix, 'peer-group', peer_group]) # check validate() - peer-group does yet not exist! with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['peer-group', peer_group, 'remote-as', ASN]) + self.cli_commit() + self.cli_set(base_path + ['peer-group', peer_group, 'remote-as', ASN]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRBGPconfig() + frrconfig = self.getFRRconfig(f'router bgp {ASN}') self.assertIn(f'router bgp {ASN}', frrconfig) self.assertIn(f' neighbor {peer_group} peer-group', frrconfig) self.assertIn(f' neighbor {peer_group} remote-as {ASN}', frrconfig) @@ -526,19 +511,19 @@ class TestProtocolsBGP(unittest.TestCase): def test_bgp_07_l2vpn_evpn(self): vnis = ['10010', '10020', '10030'] neighbors = ['192.0.2.10', '192.0.2.20', '192.0.2.30'] - self.session.set(base_path + ['address-family', 'l2vpn-evpn', 'advertise-all-vni']) - self.session.set(base_path + ['address-family', 'l2vpn-evpn', 'advertise-default-gw']) - self.session.set(base_path + ['address-family', 'l2vpn-evpn', 'advertise-svi-ip']) - self.session.set(base_path + ['address-family', 'l2vpn-evpn', 'flooding', 'disable']) + self.cli_set(base_path + ['address-family', 'l2vpn-evpn', 'advertise-all-vni']) + self.cli_set(base_path + ['address-family', 'l2vpn-evpn', 'advertise-default-gw']) + self.cli_set(base_path + ['address-family', 'l2vpn-evpn', 'advertise-svi-ip']) + self.cli_set(base_path + ['address-family', 'l2vpn-evpn', 'flooding', 'disable']) for vni in vnis: - self.session.set(base_path + ['address-family', 'l2vpn-evpn', 'vni', vni, 'advertise-default-gw']) - self.session.set(base_path + ['address-family', 'l2vpn-evpn', 'vni', vni, 'advertise-svi-ip']) + self.cli_set(base_path + ['address-family', 'l2vpn-evpn', 'vni', vni, 'advertise-default-gw']) + self.cli_set(base_path + ['address-family', 'l2vpn-evpn', 'vni', vni, 'advertise-svi-ip']) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRBGPconfig() + frrconfig = self.getFRRconfig(f'router bgp {ASN}') self.assertIn(f'router bgp {ASN}', frrconfig) self.assertIn(f' address-family l2vpn evpn', frrconfig) self.assertIn(f' advertise-all-vni', frrconfig) @@ -546,10 +531,32 @@ class TestProtocolsBGP(unittest.TestCase): self.assertIn(f' advertise-svi-ip', frrconfig) self.assertIn(f' flooding disable', frrconfig) for vni in vnis: - vniconfig = getFRRBGPVNIconfig(vni) + vniconfig = self.getFRRconfig(f' vni {vni}') self.assertIn(f'vni {vni}', vniconfig) self.assertIn(f' advertise-default-gw', vniconfig) self.assertIn(f' advertise-svi-ip', vniconfig) + def test_bgp_08_vrf_simple(self): + router_id = '127.0.0.3' + vrfs = ['red', 'green', 'blue'] + # It is safe to assume that when the basic VRF test works, all + # other OSPF related features work, as we entirely inherit the CLI + # templates and Jinja2 FRR template. + table = '1000' + for vrf in vrfs: + vrf_base = ['vrf', 'name', vrf] + self.cli_set(vrf_base + ['table', table]) + self.cli_set(vrf_base + ['protocols', 'bgp', ASN, 'parameters', 'router-id', router_id]) + table = str(int(table) + 1000) + + self.cli_commit() + + for vrf in vrfs: + # Verify FRR bgpd configuration + frrconfig = self.getFRRconfig(f'router bgp {ASN} vrf {vrf}') + + self.assertIn(f'router bgp {ASN} vrf {vrf}', frrconfig) + self.assertIn(f' bgp router-id {router_id}', frrconfig) + if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_protocols_igmp-proxy.py b/smoketest/scripts/cli/test_protocols_igmp-proxy.py index 6aaad739d..1eaf21722 100755 --- a/smoketest/scripts/cli/test_protocols_igmp-proxy.py +++ b/smoketest/scripts/cli/test_protocols_igmp-proxy.py @@ -14,9 +14,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.util import read_file @@ -28,46 +29,44 @@ base_path = ['protocols', 'igmp-proxy'] upstream_if = 'eth1' downstream_if = 'eth2' -class TestProtocolsIGMPProxy(unittest.TestCase): +class TestProtocolsIGMPProxy(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(['interfaces', 'ethernet', upstream_if, 'address', '172.16.1.1/24']) + self.cli_set(['interfaces', 'ethernet', upstream_if, 'address', '172.16.1.1/24']) def tearDown(self): - self.session.delete(['interfaces', 'ethernet', upstream_if, 'address']) - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(['interfaces', 'ethernet', upstream_if, 'address']) + self.cli_delete(base_path) + self.cli_commit() def test_igmpproxy(self): threshold = '20' altnet = '192.0.2.0/24' whitelist = '10.0.0.0/8' - self.session.set(base_path + ['disable-quickleave']) - self.session.set(base_path + ['interface', upstream_if, 'threshold', threshold]) - self.session.set(base_path + ['interface', upstream_if, 'alt-subnet', altnet]) - self.session.set(base_path + ['interface', upstream_if, 'whitelist', whitelist]) + self.cli_set(base_path + ['disable-quickleave']) + self.cli_set(base_path + ['interface', upstream_if, 'threshold', threshold]) + self.cli_set(base_path + ['interface', upstream_if, 'alt-subnet', altnet]) + self.cli_set(base_path + ['interface', upstream_if, 'whitelist', whitelist]) # Must define an upstream and at least 1 downstream interface! with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['interface', upstream_if, 'role', 'upstream']) + self.cli_commit() + self.cli_set(base_path + ['interface', upstream_if, 'role', 'upstream']) # Interface does not exist - self.session.set(base_path + ['interface', 'eth20', 'role', 'upstream']) + self.cli_set(base_path + ['interface', 'eth20', 'role', 'upstream']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(base_path + ['interface', 'eth20']) + self.cli_commit() + self.cli_delete(base_path + ['interface', 'eth20']) # Only 1 upstream interface allowed - self.session.set(base_path + ['interface', downstream_if, 'role', 'upstream']) + self.cli_set(base_path + ['interface', downstream_if, 'role', 'upstream']) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['interface', downstream_if, 'role', 'downstream']) + self.cli_commit() + self.cli_set(base_path + ['interface', downstream_if, 'role', 'downstream']) # commit changes - self.session.commit() + self.cli_commit() # Check generated configuration config = read_file(IGMP_PROXY_CONF) diff --git a/smoketest/scripts/cli/test_protocols_isis.py b/smoketest/scripts/cli/test_protocols_isis.py new file mode 100755 index 000000000..10c722eca --- /dev/null +++ b/smoketest/scripts/cli/test_protocols_isis.py @@ -0,0 +1,104 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2021 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import unittest + +from base_vyostest_shim import VyOSUnitTestSHIM +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError +from vyos.ifconfig import Section +from vyos.util import process_named_running + +PROCESS_NAME = 'isisd' +base_path = ['protocols', 'isis'] + +domain = 'VyOS' +net = '49.0001.1921.6800.1002.00' + +class TestProtocolsISIS(VyOSUnitTestSHIM.TestCase): + def tearDown(self): + self.cli_delete(base_path) + self.cli_commit() + + # Check for running process + self.assertTrue(process_named_running(PROCESS_NAME)) + + def test_isis_01_redistribute(self): + prefix_list = 'EXPORT-ISIS' + route_map = 'EXPORT-ISIS' + rule = '10' + self.cli_set(['policy', 'prefix-list', prefix_list, 'rule', rule, 'action', 'permit']) + self.cli_set(['policy', 'prefix-list', prefix_list, 'rule', rule, 'prefix', '203.0.113.0/24']) + self.cli_set(['policy', 'route-map', route_map, 'rule', rule, 'action', 'permit']) + self.cli_set(['policy', 'route-map', route_map, 'rule', rule, 'match', 'ip', 'address', 'prefix-list', prefix_list]) + + self.cli_set(base_path + ['net', net]) + self.cli_set(base_path + ['redistribute', 'ipv4', 'connected', 'level-2', 'route-map', route_map]) + + interfaces = Section.interfaces('ethernet') + for interface in interfaces: + self.cli_set(base_path + ['interface', interface]) + + # Commit all changes + self.cli_commit() + + # Verify all changes + # XXX: FRR represents router isis with a trailing whitespace :/ + tmp = self.getFRRconfig(f'router isis {domain} ') + self.assertIn(f' net {net}', tmp) + self.assertIn(f' redistribute ipv4 connected level-2 route-map {route_map}', tmp) + + for interface in interfaces: + tmp = self.getFRRconfig(f'interface {interface}') + self.assertIn(f' ip router isis {domain}', tmp) + + self.cli_delete(['policy']) + + + def test_isis_02_vrfs(self): + vrfs = ['red', 'green', 'blue'] + # It is safe to assume that when the basic VRF test works, all other + # IS-IS related features work, as we entirely inherit the CLI templates + # and Jinja2 FRR template. + table = '1000' + vrf = 'red' + vrf_base = ['vrf', 'name', vrf] + vrf_iface = 'eth1' + self.cli_set(vrf_base + ['table', table]) + self.cli_set(vrf_base + ['protocols', 'isis', 'net', net]) + self.cli_set(vrf_base + ['protocols', 'isis', 'interface', vrf_iface]) + self.cli_set(['interfaces', 'ethernet', vrf_iface, 'vrf', vrf]) + + # Also set a default VRF IS-IS config + self.cli_set(base_path + ['net', net]) + self.cli_set(base_path + ['interface', 'eth0']) + self.cli_commit() + + # Verify FRR isisd configuration + # XXX: FRR represents router isis with a trailing whitespace :/ + tmp = self.getFRRconfig(f'router isis {domain} ') + self.assertIn(f'router isis {domain}', tmp) + self.assertIn(f' net {net}', tmp) + + tmp = self.getFRRconfig(f'router isis {domain} vrf {vrf}') + self.assertIn(f'router isis {domain} vrf {vrf}', tmp) + self.assertIn(f' net {net}', tmp) + + self.cli_delete(['vrf', 'name', vrf]) + self.cli_delete(['interfaces', 'ethernet', vrf_iface, 'vrf']) + +if __name__ == '__main__': + unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_protocols_ospf.py b/smoketest/scripts/cli/test_protocols_ospf.py index d9a6c17e4..8d94c86cb 100755 --- a/smoketest/scripts/cli/test_protocols_ospf.py +++ b/smoketest/scripts/cli/test_protocols_ospf.py @@ -14,12 +14,11 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest -from vyos.configsession import ConfigSession +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.ifconfig import Section -from vyos.util import cmd from vyos.util import process_named_running PROCESS_NAME = 'ospfd' @@ -27,56 +26,46 @@ base_path = ['protocols', 'ospf'] route_map = 'foo-bar-baz10' -def getFRROSPFconfig(): - return cmd('vtysh -c "show run" | sed -n "/^router ospf/,/^!/p"') - -def getFRRInterfaceConfig(interface): - return cmd(f'vtysh -c "show run" | sed -n "/^interface {interface}$/,/^!/p"') - -class TestProtocolsOSPF(unittest.TestCase): +class TestProtocolsOSPF(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'route-map', route_map, 'rule', '20', 'action', 'permit']) + self.cli_set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'route-map', route_map, 'rule', '20', 'action', 'permit']) def tearDown(self): # Check for running process self.assertTrue(process_named_running(PROCESS_NAME)) - - self.session.delete(['policy', 'route-map', route_map]) - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(['policy', 'route-map', route_map]) + self.cli_delete(base_path) + self.cli_commit() def test_ospf_01_defaults(self): # commit changes - self.session.set(base_path) - self.session.commit() + self.cli_set(base_path) + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) self.assertIn(f' auto-cost reference-bandwidth 100', frrconfig) self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults - def test_ospf_02_simple(self): router_id = '127.0.0.1' abr_type = 'ibm' bandwidth = '1000' metric = '123' - self.session.set(base_path + ['auto-cost', 'reference-bandwidth', bandwidth]) - self.session.set(base_path + ['parameters', 'router-id', router_id]) - self.session.set(base_path + ['parameters', 'abr-type', abr_type]) - self.session.set(base_path + ['log-adjacency-changes', 'detail']) - self.session.set(base_path + ['default-metric', metric]) + self.cli_set(base_path + ['auto-cost', 'reference-bandwidth', bandwidth]) + self.cli_set(base_path + ['parameters', 'router-id', router_id]) + self.cli_set(base_path + ['parameters', 'abr-type', abr_type]) + self.cli_set(base_path + ['log-adjacency-changes', 'detail']) + self.cli_set(base_path + ['default-metric', metric]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) self.assertIn(f' auto-cost reference-bandwidth {bandwidth}', frrconfig) self.assertIn(f' ospf router-id {router_id}', frrconfig) @@ -90,22 +79,22 @@ class TestProtocolsOSPF(unittest.TestCase): seq = '10' protocols = ['bgp', 'connected', 'isis', 'kernel', 'rip', 'static'] - self.session.set(['policy', 'access-list', acl, 'rule', seq, 'action', 'permit']) - self.session.set(['policy', 'access-list', acl, 'rule', seq, 'source', 'any']) - self.session.set(['policy', 'access-list', acl, 'rule', seq, 'destination', 'any']) + self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'action', 'permit']) + self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'source', 'any']) + self.cli_set(['policy', 'access-list', acl, 'rule', seq, 'destination', 'any']) for ptotocol in protocols: - self.session.set(base_path + ['access-list', acl, 'export', ptotocol]) + self.cli_set(base_path + ['access-list', acl, 'export', ptotocol]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults for ptotocol in protocols: self.assertIn(f' distribute-list {acl} out {ptotocol}', frrconfig) # defaults - self.session.delete(['policy', 'access-list', acl]) + self.cli_delete(['policy', 'access-list', acl]) def test_ospf_04_default_originate(self): @@ -113,25 +102,25 @@ class TestProtocolsOSPF(unittest.TestCase): metric = '50' metric_type = '1' - self.session.set(base_path + ['default-information', 'originate', 'metric', metric]) - self.session.set(base_path + ['default-information', 'originate', 'metric-type', metric_type]) - self.session.set(base_path + ['default-information', 'originate', 'route-map', route_map]) + self.cli_set(base_path + ['default-information', 'originate', 'metric', metric]) + self.cli_set(base_path + ['default-information', 'originate', 'metric-type', metric_type]) + self.cli_set(base_path + ['default-information', 'originate', 'route-map', route_map]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults self.assertIn(f' default-information originate metric {metric} metric-type {metric_type} route-map {route_map}', frrconfig) # Now set 'always' - self.session.set(base_path + ['default-information', 'originate', 'always']) - self.session.commit() + self.cli_set(base_path + ['default-information', 'originate', 'always']) + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f' default-information originate always metric {metric} metric-type {metric_type} route-map {route_map}', frrconfig) @@ -144,21 +133,21 @@ class TestProtocolsOSPF(unittest.TestCase): on_shutdown = '60' refresh = '50' - self.session.set(base_path + ['distance', 'global', global_distance]) - self.session.set(base_path + ['distance', 'ospf', 'external', external]) - self.session.set(base_path + ['distance', 'ospf', 'intra-area', intra_area]) + self.cli_set(base_path + ['distance', 'global', global_distance]) + self.cli_set(base_path + ['distance', 'ospf', 'external', external]) + self.cli_set(base_path + ['distance', 'ospf', 'intra-area', intra_area]) - self.session.set(base_path + ['max-metric', 'router-lsa', 'on-startup', on_startup]) - self.session.set(base_path + ['max-metric', 'router-lsa', 'on-shutdown', on_shutdown]) + self.cli_set(base_path + ['max-metric', 'router-lsa', 'on-startup', on_startup]) + self.cli_set(base_path + ['max-metric', 'router-lsa', 'on-shutdown', on_shutdown]) - self.session.set(base_path + ['mpls-te', 'enable']) - self.session.set(base_path + ['refresh', 'timers', refresh]) + self.cli_set(base_path + ['mpls-te', 'enable']) + self.cli_set(base_path + ['refresh', 'timers', refresh]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) self.assertIn(f' mpls-te on', frrconfig) self.assertIn(f' mpls-te router-address 0.0.0.0', frrconfig) # default @@ -170,10 +159,10 @@ class TestProtocolsOSPF(unittest.TestCase): # enable inter-area - self.session.set(base_path + ['distance', 'ospf', 'inter-area', inter_area]) - self.session.commit() + self.cli_set(base_path + ['distance', 'ospf', 'inter-area', inter_area]) + self.cli_commit() - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f' distance ospf intra-area {intra_area} inter-area {inter_area} external {external}', frrconfig) @@ -182,30 +171,30 @@ class TestProtocolsOSPF(unittest.TestCase): poll_interval = '20' neighbors = ['1.1.1.1', '2.2.2.2', '3.3.3.3'] for neighbor in neighbors: - self.session.set(base_path + ['neighbor', neighbor, 'priority', priority]) - self.session.set(base_path + ['neighbor', neighbor, 'poll-interval', poll_interval]) + self.cli_set(base_path + ['neighbor', neighbor, 'priority', priority]) + self.cli_set(base_path + ['neighbor', neighbor, 'poll-interval', poll_interval]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) for neighbor in neighbors: self.assertIn(f' neighbor {neighbor} priority {priority} poll-interval {poll_interval}', frrconfig) # default def test_ospf_07_passive_interface(self): - self.session.set(base_path + ['passive-interface', 'default']) + self.cli_set(base_path + ['passive-interface', 'default']) interfaces = Section.interfaces('ethernet') for interface in interfaces: - self.session.set(base_path + ['passive-interface-exclude', interface]) + self.cli_set(base_path + ['passive-interface-exclude', interface]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) self.assertIn(f' passive-interface default', frrconfig) # default for interface in interfaces: @@ -218,16 +207,16 @@ class TestProtocolsOSPF(unittest.TestCase): redistribute = ['bgp', 'connected', 'isis', 'kernel', 'rip', 'static'] for protocol in redistribute: - self.session.set(base_path + ['redistribute', protocol, 'metric', metric]) - self.session.set(base_path + ['redistribute', protocol, 'route-map', route_map]) + self.cli_set(base_path + ['redistribute', protocol, 'metric', metric]) + self.cli_set(base_path + ['redistribute', protocol, 'route-map', route_map]) if protocol not in ['kernel', 'static']: - self.session.set(base_path + ['redistribute', protocol, 'metric-type', metric_type]) + self.cli_set(base_path + ['redistribute', protocol, 'metric-type', metric_type]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) for protocol in redistribute: if protocol in ['kernel', 'static']: @@ -235,6 +224,7 @@ class TestProtocolsOSPF(unittest.TestCase): else: self.assertIn(f' redistribute {protocol} metric {metric} metric-type {metric_type} route-map {route_map}', frrconfig) + def test_ospf_09_virtual_link(self): networks = ['10.0.0.0/8', '172.16.0.0/12', '192.168.0.0/16'] area = '10' @@ -245,38 +235,26 @@ class TestProtocolsOSPF(unittest.TestCase): transmit = '5' dead = '40' - self.session.set(base_path + ['area', area, 'shortcut', shortcut]) - self.session.set(base_path + ['area', area, 'virtual-link', virtual_link, 'hello-interval', hello]) - self.session.set(base_path + ['area', area, 'virtual-link', virtual_link, 'retransmit-interval', retransmit]) - self.session.set(base_path + ['area', area, 'virtual-link', virtual_link, 'transmit-delay', transmit]) - self.session.set(base_path + ['area', area, 'virtual-link', virtual_link, 'dead-interval', dead]) + self.cli_set(base_path + ['area', area, 'shortcut', shortcut]) + self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'hello-interval', hello]) + self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'retransmit-interval', retransmit]) + self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'transmit-delay', transmit]) + self.cli_set(base_path + ['area', area, 'virtual-link', virtual_link, 'dead-interval', dead]) for network in networks: - self.session.set(base_path + ['area', area, 'network', network]) + self.cli_set(base_path + ['area', area, 'network', network]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() - import pprint - # From time to time the CI fails with an error like: - # ====================================================================== - # FAIL: test_ospf_09_virtual_link (__main__.TestProtocolsOSPF) - # ---------------------------------------------------------------------- - # Traceback (most recent call last): - # File "/usr/libexec/vyos/tests/smoke/cli/test_protocols_ospf.py", line 261, in test_ospf_09_virtual_link - # self.assertIn(f'router ospf', frrconfig) - # AssertionError: 'router ospf' not found in '' - # - # Add some debug code so we can find the root cause - pprint.pprint(frrconfig) - + frrconfig = self.getFRRconfig('router ospf') self.assertIn(f'router ospf', frrconfig) self.assertIn(f' area {area} shortcut {shortcut}', frrconfig) self.assertIn(f' area {area} virtual-link {virtual_link} hello-interval {hello} retransmit-interval {retransmit} transmit-delay {transmit} dead-interval {dead}', frrconfig) for network in networks: self.assertIn(f' network {network} area {area}', frrconfig) + def test_ospf_10_interface_configureation(self): interfaces = Section.interfaces('ethernet') password = 'vyos1234' @@ -286,19 +264,19 @@ class TestProtocolsOSPF(unittest.TestCase): priority = '200' for interface in interfaces: - self.session.set(base_path + ['interface', interface, 'authentication', 'plaintext-password', password]) - self.session.set(base_path + ['interface', interface, 'bandwidth', bandwidth]) - self.session.set(base_path + ['interface', interface, 'bfd']) - self.session.set(base_path + ['interface', interface, 'cost', cost]) - self.session.set(base_path + ['interface', interface, 'mtu-ignore']) - self.session.set(base_path + ['interface', interface, 'network', network]) - self.session.set(base_path + ['interface', interface, 'priority', priority]) + self.cli_set(base_path + ['interface', interface, 'authentication', 'plaintext-password', password]) + self.cli_set(base_path + ['interface', interface, 'bandwidth', bandwidth]) + self.cli_set(base_path + ['interface', interface, 'bfd']) + self.cli_set(base_path + ['interface', interface, 'cost', cost]) + self.cli_set(base_path + ['interface', interface, 'mtu-ignore']) + self.cli_set(base_path + ['interface', interface, 'network', network]) + self.cli_set(base_path + ['interface', interface, 'priority', priority]) # commit changes - self.session.commit() + self.cli_commit() for interface in interfaces: - config = getFRRInterfaceConfig(interface) + config = self.getFRRconfig(f'interface {interface}') self.assertIn(f'interface {interface}', config) self.assertIn(f' ip ospf authentication-key {password}', config) self.assertIn(f' ip ospf bfd', config) @@ -308,5 +286,36 @@ class TestProtocolsOSPF(unittest.TestCase): self.assertIn(f' ip ospf priority {priority}', config) self.assertIn(f' bandwidth {bandwidth}', config) + + def test_ospf_11_vrfs(self): + # It is safe to assume that when the basic VRF test works, all + # other OSPF related features work, as we entirely inherit the CLI + # templates and Jinja2 FRR template. + table = '1000' + vrf = 'blue' + vrf_base = ['vrf', 'name', vrf] + vrf_iface = 'eth1' + self.cli_set(vrf_base + ['table', table]) + self.cli_set(vrf_base + ['protocols', 'ospf', 'interface', vrf_iface]) + self.cli_set(['interfaces', 'ethernet', vrf_iface, 'vrf', vrf]) + + # Also set a default VRF OSPF config + self.cli_set(base_path) + self.cli_commit() + + # Verify FRR ospfd configuration + frrconfig = self.getFRRconfig('router ospf') + self.assertIn(f'router ospf', frrconfig) + self.assertIn(f' auto-cost reference-bandwidth 100', frrconfig) + self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults + + frrconfig = self.getFRRconfig(f'router ospf vrf {vrf}') + self.assertIn(f'router ospf vrf {vrf}', frrconfig) + self.assertIn(f' auto-cost reference-bandwidth 100', frrconfig) + self.assertIn(f' timers throttle spf 200 1000 10000', frrconfig) # defaults + + self.cli_delete(['vrf', 'name', vrf]) + self.cli_delete(['interfaces', 'ethernet', vrf_iface, 'vrf']) + if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_protocols_ospfv3.py b/smoketest/scripts/cli/test_protocols_ospfv3.py index 754c4488f..6bb551642 100755 --- a/smoketest/scripts/cli/test_protocols_ospfv3.py +++ b/smoketest/scripts/cli/test_protocols_ospfv3.py @@ -14,12 +14,12 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.ifconfig import Section -from vyos.util import cmd from vyos.util import process_named_running PROCESS_NAME = 'ospf6d' @@ -28,47 +28,35 @@ base_path = ['protocols', 'ospfv3'] router_id = '192.0.2.1' default_area = '0' -def getFRROSPFconfig(): - return cmd('vtysh -c "show run" | sed -n "/router ospf6/,/^!/p"') - -def getFRRIFconfig(iface): - return cmd(f'vtysh -c "show run" | sed -n "/^interface {iface}/,/^!/p"') - -class TestProtocolsOSPFv3(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestProtocolsOSPFv3(VyOSUnitTestSHIM.TestCase): def tearDown(self): # Check for running process self.assertTrue(process_named_running(PROCESS_NAME)) - - self.session.delete(base_path) - self.session.commit() - del self.session - + self.cli_delete(base_path) + self.cli_commit() def test_ospfv3_01_basic(self): seq = '10' prefix = '2001:db8::/32' acl_name = 'foo-acl-100' - self.session.set(['policy', 'access-list6', acl_name, 'rule', seq, 'action', 'permit']) - self.session.set(['policy', 'access-list6', acl_name, 'rule', seq, 'source', 'any']) + self.cli_set(['policy', 'access-list6', acl_name, 'rule', seq, 'action', 'permit']) + self.cli_set(['policy', 'access-list6', acl_name, 'rule', seq, 'source', 'any']) - self.session.set(base_path + ['parameters', 'router-id', router_id]) - self.session.set(base_path + ['area', default_area, 'range', prefix, 'advertise']) - self.session.set(base_path + ['area', default_area, 'export-list', acl_name]) - self.session.set(base_path + ['area', default_area, 'import-list', acl_name]) + self.cli_set(base_path + ['parameters', 'router-id', router_id]) + self.cli_set(base_path + ['area', default_area, 'range', prefix, 'advertise']) + self.cli_set(base_path + ['area', default_area, 'export-list', acl_name]) + self.cli_set(base_path + ['area', default_area, 'import-list', acl_name]) interfaces = Section.interfaces('ethernet') for interface in interfaces: - self.session.set(base_path + ['area', default_area, 'interface', interface]) + self.cli_set(base_path + ['area', default_area, 'interface', interface]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf6') self.assertIn(f'router ospf6', frrconfig) self.assertIn(f' area {default_area} range {prefix}', frrconfig) self.assertIn(f' ospf6 router-id {router_id}', frrconfig) @@ -78,7 +66,7 @@ class TestProtocolsOSPFv3(unittest.TestCase): for interface in interfaces: self.assertIn(f' interface {interface} area {default_area}', frrconfig) - self.session.delete(['policy', 'access-list6', acl_name]) + self.cli_delete(['policy', 'access-list6', acl_name]) def test_ospfv3_02_distance(self): @@ -87,16 +75,16 @@ class TestProtocolsOSPFv3(unittest.TestCase): dist_inter_area = '120' dist_intra_area = '130' - self.session.set(base_path + ['distance', 'global', dist_global]) - self.session.set(base_path + ['distance', 'ospfv3', 'external', dist_external]) - self.session.set(base_path + ['distance', 'ospfv3', 'inter-area', dist_inter_area]) - self.session.set(base_path + ['distance', 'ospfv3', 'intra-area', dist_intra_area]) + self.cli_set(base_path + ['distance', 'global', dist_global]) + self.cli_set(base_path + ['distance', 'ospfv3', 'external', dist_external]) + self.cli_set(base_path + ['distance', 'ospfv3', 'inter-area', dist_inter_area]) + self.cli_set(base_path + ['distance', 'ospfv3', 'intra-area', dist_intra_area]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf6') self.assertIn(f'router ospf6', frrconfig) self.assertIn(f' distance {dist_global}', frrconfig) self.assertIn(f' distance ospf6 intra-area {dist_intra_area} inter-area {dist_inter_area} external {dist_external}', frrconfig) @@ -107,51 +95,51 @@ class TestProtocolsOSPFv3(unittest.TestCase): route_map_seq = '10' redistribute = ['bgp', 'connected', 'kernel', 'ripng', 'static'] - self.session.set(['policy', 'route-map', route_map, 'rule', route_map_seq, 'action', 'permit']) + self.cli_set(['policy', 'route-map', route_map, 'rule', route_map_seq, 'action', 'permit']) for protocol in redistribute: - self.session.set(base_path + ['redistribute', protocol, 'route-map', route_map]) + self.cli_set(base_path + ['redistribute', protocol, 'route-map', route_map]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf6') self.assertIn(f'router ospf6', frrconfig) for protocol in redistribute: self.assertIn(f' redistribute {protocol} route-map {route_map}', frrconfig) - def test_ospfv3_0104_interfaces(self): + def test_ospfv3_04_interfaces(self): - self.session.set(base_path + ['parameters', 'router-id', router_id]) - self.session.set(base_path + ['area', default_area]) + self.cli_set(base_path + ['parameters', 'router-id', router_id]) + self.cli_set(base_path + ['area', default_area]) cost = '100' priority = '10' interfaces = Section.interfaces('ethernet') for interface in interfaces: if_base = base_path + ['interface', interface] - self.session.set(if_base + ['bfd']) - self.session.set(if_base + ['cost', cost]) - self.session.set(if_base + ['instance-id', '0']) - self.session.set(if_base + ['mtu-ignore']) - self.session.set(if_base + ['network', 'point-to-point']) - self.session.set(if_base + ['passive']) - self.session.set(if_base + ['priority', priority]) + self.cli_set(if_base + ['bfd']) + self.cli_set(if_base + ['cost', cost]) + self.cli_set(if_base + ['instance-id', '0']) + self.cli_set(if_base + ['mtu-ignore']) + self.cli_set(if_base + ['network', 'point-to-point']) + self.cli_set(if_base + ['passive']) + self.cli_set(if_base + ['priority', priority]) cost = str(int(cost) + 10) priority = str(int(priority) + 5) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRROSPFconfig() + frrconfig = self.getFRRconfig('router ospf6') self.assertIn(f'router ospf6', frrconfig) cost = '100' priority = '10' for interface in interfaces: - if_config = getFRRIFconfig(interface) + if_config = self.getFRRconfig(f'interface {interface}') self.assertIn(f'interface {interface}', if_config) self.assertIn(f' ipv6 ospf6 bfd', if_config) self.assertIn(f' ipv6 ospf6 cost {cost}', if_config) diff --git a/smoketest/scripts/cli/test_protocols_rip.py b/smoketest/scripts/cli/test_protocols_rip.py index f42ea0c0a..3406688c5 100755 --- a/smoketest/scripts/cli/test_protocols_rip.py +++ b/smoketest/scripts/cli/test_protocols_rip.py @@ -14,12 +14,12 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.ifconfig import Section -from vyos.util import cmd from vyos.util import process_named_running PROCESS_NAME = 'ripd' @@ -31,35 +31,28 @@ route_map = 'FooBar123' base_path = ['protocols', 'rip'] -def getFRRconfig(): - return cmd('vtysh -c "show run" | sed -n "/router rip/,/^!/p"') - -class TestProtocolsRIP(unittest.TestCase): +class TestProtocolsRIP(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - - self.session.set(['policy', 'access-list', acl_in, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'access-list', acl_in, 'rule', '10', 'source', 'any']) - self.session.set(['policy', 'access-list', acl_in, 'rule', '10', 'destination', 'any']) - self.session.set(['policy', 'access-list', acl_out, 'rule', '20', 'action', 'deny']) - self.session.set(['policy', 'access-list', acl_out, 'rule', '20', 'source', 'any']) - self.session.set(['policy', 'access-list', acl_out, 'rule', '20', 'destination', 'any']) - self.session.set(['policy', 'prefix-list', prefix_list_in, 'rule', '100', 'action', 'permit']) - self.session.set(['policy', 'prefix-list', prefix_list_in, 'rule', '100', 'prefix', '192.0.2.0/24']) - self.session.set(['policy', 'prefix-list', prefix_list_out, 'rule', '200', 'action', 'deny']) - self.session.set(['policy', 'prefix-list', prefix_list_out, 'rule', '200', 'prefix', '192.0.2.0/24']) - self.session.set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'access-list', acl_in, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'access-list', acl_in, 'rule', '10', 'source', 'any']) + self.cli_set(['policy', 'access-list', acl_in, 'rule', '10', 'destination', 'any']) + self.cli_set(['policy', 'access-list', acl_out, 'rule', '20', 'action', 'deny']) + self.cli_set(['policy', 'access-list', acl_out, 'rule', '20', 'source', 'any']) + self.cli_set(['policy', 'access-list', acl_out, 'rule', '20', 'destination', 'any']) + self.cli_set(['policy', 'prefix-list', prefix_list_in, 'rule', '100', 'action', 'permit']) + self.cli_set(['policy', 'prefix-list', prefix_list_in, 'rule', '100', 'prefix', '192.0.2.0/24']) + self.cli_set(['policy', 'prefix-list', prefix_list_out, 'rule', '200', 'action', 'deny']) + self.cli_set(['policy', 'prefix-list', prefix_list_out, 'rule', '200', 'prefix', '192.0.2.0/24']) + self.cli_set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) def tearDown(self): - self.session.delete(base_path) - self.session.delete(['policy', 'access-list', acl_in]) - self.session.delete(['policy', 'access-list', acl_out]) - self.session.delete(['policy', 'prefix-list', prefix_list_in]) - self.session.delete(['policy', 'prefix-list', prefix_list_out]) - self.session.delete(['policy', 'route-map', route_map]) - - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_delete(['policy', 'access-list', acl_in]) + self.cli_delete(['policy', 'access-list', acl_out]) + self.cli_delete(['policy', 'prefix-list', prefix_list_in]) + self.cli_delete(['policy', 'prefix-list', prefix_list_out]) + self.cli_delete(['policy', 'route-map', route_map]) + self.cli_commit() # Check for running process self.assertTrue(process_named_running(PROCESS_NAME)) @@ -76,39 +69,39 @@ class TestProtocolsRIP(unittest.TestCase): timer_timeout = '1000' timer_update = '90' - self.session.set(base_path + ['default-distance', distance]) - self.session.set(base_path + ['default-information', 'originate']) - self.session.set(base_path + ['default-metric', metric]) - self.session.set(base_path + ['distribute-list', 'access-list', 'in', acl_in]) - self.session.set(base_path + ['distribute-list', 'access-list', 'out', acl_out]) - self.session.set(base_path + ['distribute-list', 'prefix-list', 'in', prefix_list_in]) - self.session.set(base_path + ['distribute-list', 'prefix-list', 'out', prefix_list_out]) - self.session.set(base_path + ['passive-interface', 'default']) - self.session.set(base_path + ['timers', 'garbage-collection', timer_garbage]) - self.session.set(base_path + ['timers', 'timeout', timer_timeout]) - self.session.set(base_path + ['timers', 'update', timer_update]) + self.cli_set(base_path + ['default-distance', distance]) + self.cli_set(base_path + ['default-information', 'originate']) + self.cli_set(base_path + ['default-metric', metric]) + self.cli_set(base_path + ['distribute-list', 'access-list', 'in', acl_in]) + self.cli_set(base_path + ['distribute-list', 'access-list', 'out', acl_out]) + self.cli_set(base_path + ['distribute-list', 'prefix-list', 'in', prefix_list_in]) + self.cli_set(base_path + ['distribute-list', 'prefix-list', 'out', prefix_list_out]) + self.cli_set(base_path + ['passive-interface', 'default']) + self.cli_set(base_path + ['timers', 'garbage-collection', timer_garbage]) + self.cli_set(base_path + ['timers', 'timeout', timer_timeout]) + self.cli_set(base_path + ['timers', 'update', timer_update]) for interface in interfaces: - self.session.set(base_path + ['interface', interface]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'in', acl_in]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'out', acl_out]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'in', prefix_list_in]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'out', prefix_list_out]) + self.cli_set(base_path + ['interface', interface]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'in', acl_in]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'out', acl_out]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'in', prefix_list_in]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'out', prefix_list_out]) for neighbor in neighbors: - self.session.set(base_path + ['neighbor', neighbor]) + self.cli_set(base_path + ['neighbor', neighbor]) for network in networks: - self.session.set(base_path + ['network', network]) - self.session.set(base_path + ['network-distance', network, 'distance', network_distance]) - self.session.set(base_path + ['route', network]) + self.cli_set(base_path + ['network', network]) + self.cli_set(base_path + ['network-distance', network, 'distance', network_distance]) + self.cli_set(base_path + ['route', network]) for proto in redistribute: - self.session.set(base_path + ['redistribute', proto, 'metric', metric]) - self.session.set(base_path + ['redistribute', proto, 'route-map', route_map]) + self.cli_set(base_path + ['redistribute', proto, 'metric', metric]) + self.cli_set(base_path + ['redistribute', proto, 'route-map', route_map]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRRconfig() + frrconfig = self.getFRRconfig('router rip') self.assertIn(f'router rip', frrconfig) self.assertIn(f' distance {distance}', frrconfig) self.assertIn(f' default-information originate', frrconfig) diff --git a/smoketest/scripts/cli/test_protocols_ripng.py b/smoketest/scripts/cli/test_protocols_ripng.py index 6850b60d3..add92b73d 100755 --- a/smoketest/scripts/cli/test_protocols_ripng.py +++ b/smoketest/scripts/cli/test_protocols_ripng.py @@ -14,12 +14,12 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.ifconfig import Section -from vyos.util import cmd from vyos.util import process_named_running PROCESS_NAME = 'ripngd' @@ -31,33 +31,26 @@ route_map = 'FooBar123' base_path = ['protocols', 'ripng'] -def getFRRconfig(): - return cmd('vtysh -c "show run" | sed -n "/router ripng/,/^!/p"') - -class TestProtocolsRIPng(unittest.TestCase): +class TestProtocolsRIPng(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - - self.session.set(['policy', 'access-list6', acl_in, 'rule', '10', 'action', 'permit']) - self.session.set(['policy', 'access-list6', acl_in, 'rule', '10', 'source', 'any']) - self.session.set(['policy', 'access-list6', acl_out, 'rule', '20', 'action', 'deny']) - self.session.set(['policy', 'access-list6', acl_out, 'rule', '20', 'source', 'any']) - self.session.set(['policy', 'prefix-list6', prefix_list_in, 'rule', '100', 'action', 'permit']) - self.session.set(['policy', 'prefix-list6', prefix_list_in, 'rule', '100', 'prefix', '2001:db8::/32']) - self.session.set(['policy', 'prefix-list6', prefix_list_out, 'rule', '200', 'action', 'deny']) - self.session.set(['policy', 'prefix-list6', prefix_list_out, 'rule', '200', 'prefix', '2001:db8::/32']) - self.session.set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'access-list6', acl_in, 'rule', '10', 'action', 'permit']) + self.cli_set(['policy', 'access-list6', acl_in, 'rule', '10', 'source', 'any']) + self.cli_set(['policy', 'access-list6', acl_out, 'rule', '20', 'action', 'deny']) + self.cli_set(['policy', 'access-list6', acl_out, 'rule', '20', 'source', 'any']) + self.cli_set(['policy', 'prefix-list6', prefix_list_in, 'rule', '100', 'action', 'permit']) + self.cli_set(['policy', 'prefix-list6', prefix_list_in, 'rule', '100', 'prefix', '2001:db8::/32']) + self.cli_set(['policy', 'prefix-list6', prefix_list_out, 'rule', '200', 'action', 'deny']) + self.cli_set(['policy', 'prefix-list6', prefix_list_out, 'rule', '200', 'prefix', '2001:db8::/32']) + self.cli_set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) def tearDown(self): - self.session.delete(base_path) - self.session.delete(['policy', 'access-list6', acl_in]) - self.session.delete(['policy', 'access-list6', acl_out]) - self.session.delete(['policy', 'prefix-list6', prefix_list_in]) - self.session.delete(['policy', 'prefix-list6', prefix_list_out]) - self.session.delete(['policy', 'route-map', route_map]) - - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_delete(['policy', 'access-list6', acl_in]) + self.cli_delete(['policy', 'access-list6', acl_out]) + self.cli_delete(['policy', 'prefix-list6', prefix_list_in]) + self.cli_delete(['policy', 'prefix-list6', prefix_list_out]) + self.cli_delete(['policy', 'route-map', route_map]) + self.cli_commit() # Check for running process self.assertTrue(process_named_running(PROCESS_NAME)) @@ -72,38 +65,38 @@ class TestProtocolsRIPng(unittest.TestCase): timer_timeout = '1000' timer_update = '90' - self.session.set(base_path + ['default-information', 'originate']) - self.session.set(base_path + ['default-metric', metric]) - self.session.set(base_path + ['distribute-list', 'access-list', 'in', acl_in]) - self.session.set(base_path + ['distribute-list', 'access-list', 'out', acl_out]) - self.session.set(base_path + ['distribute-list', 'prefix-list', 'in', prefix_list_in]) - self.session.set(base_path + ['distribute-list', 'prefix-list', 'out', prefix_list_out]) - self.session.set(base_path + ['passive-interface', 'default']) - self.session.set(base_path + ['timers', 'garbage-collection', timer_garbage]) - self.session.set(base_path + ['timers', 'timeout', timer_timeout]) - self.session.set(base_path + ['timers', 'update', timer_update]) + self.cli_set(base_path + ['default-information', 'originate']) + self.cli_set(base_path + ['default-metric', metric]) + self.cli_set(base_path + ['distribute-list', 'access-list', 'in', acl_in]) + self.cli_set(base_path + ['distribute-list', 'access-list', 'out', acl_out]) + self.cli_set(base_path + ['distribute-list', 'prefix-list', 'in', prefix_list_in]) + self.cli_set(base_path + ['distribute-list', 'prefix-list', 'out', prefix_list_out]) + self.cli_set(base_path + ['passive-interface', 'default']) + self.cli_set(base_path + ['timers', 'garbage-collection', timer_garbage]) + self.cli_set(base_path + ['timers', 'timeout', timer_timeout]) + self.cli_set(base_path + ['timers', 'update', timer_update]) for aggregate in aggregates: - self.session.set(base_path + ['aggregate-address', aggregate]) + self.cli_set(base_path + ['aggregate-address', aggregate]) for interface in interfaces: - self.session.set(base_path + ['interface', interface]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'in', acl_in]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'out', acl_out]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'in', prefix_list_in]) - self.session.set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'out', prefix_list_out]) + self.cli_set(base_path + ['interface', interface]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'in', acl_in]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'access-list', 'out', acl_out]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'in', prefix_list_in]) + self.cli_set(base_path + ['distribute-list', 'interface', interface, 'prefix-list', 'out', prefix_list_out]) for network in networks: - self.session.set(base_path + ['network', network]) - self.session.set(base_path + ['route', network]) + self.cli_set(base_path + ['network', network]) + self.cli_set(base_path + ['route', network]) for proto in redistribute: - self.session.set(base_path + ['redistribute', proto, 'metric', metric]) - self.session.set(base_path + ['redistribute', proto, 'route-map', route_map]) + self.cli_set(base_path + ['redistribute', proto, 'metric', metric]) + self.cli_set(base_path + ['redistribute', proto, 'route-map', route_map]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR ospfd configuration - frrconfig = getFRRconfig() + frrconfig = self.getFRRconfig('router ripng') self.assertIn(f'router ripng', frrconfig) self.assertIn(f' default-information originate', frrconfig) self.assertIn(f' default-metric {metric}', frrconfig) diff --git a/smoketest/scripts/cli/test_protocols_rpki.py b/smoketest/scripts/cli/test_protocols_rpki.py index bec4ef76f..8212e9469 100755 --- a/smoketest/scripts/cli/test_protocols_rpki.py +++ b/smoketest/scripts/cli/test_protocols_rpki.py @@ -17,6 +17,8 @@ import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.util import cmd @@ -29,22 +31,15 @@ rpki_known_hosts = '/config/auth/known_hosts' rpki_ssh_key = '/config/auth/id_rsa_rpki' rpki_ssh_pub = f'{rpki_ssh_key}.pub' -def getFRRRPKIconfig(): - return cmd(f'vtysh -c "show run" | sed -n "/rpki/,/^!/p"') - -class TestProtocolsRPKI(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestProtocolsRPKI(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() # Nothing RPKI specific should be left over in the config # # Disabled until T3266 is resolved - # frrconfig = getFRRRPKIconfig() + # frrconfig = self.getFRRconfig('rpki') # self.assertNotIn('rpki', frrconfig) # Check for running process @@ -71,16 +66,16 @@ class TestProtocolsRPKI(unittest.TestCase): }, } - self.session.set(base_path + ['polling-period', polling]) + self.cli_set(base_path + ['polling-period', polling]) for peer, peer_config in cache.items(): - self.session.set(base_path + ['cache', peer, 'port', peer_config['port']]) - self.session.set(base_path + ['cache', peer, 'preference', peer_config['preference']]) + self.cli_set(base_path + ['cache', peer, 'port', peer_config['port']]) + self.cli_set(base_path + ['cache', peer, 'preference', peer_config['preference']]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR configuration - frrconfig = getFRRRPKIconfig() + frrconfig = self.getFRRconfig('rpki') self.assertIn(f'rpki polling_period {polling}', frrconfig) for peer, peer_config in cache.items(): @@ -103,21 +98,21 @@ class TestProtocolsRPKI(unittest.TestCase): }, } - self.session.set(base_path + ['polling-period', polling]) + self.cli_set(base_path + ['polling-period', polling]) for peer, peer_config in cache.items(): - self.session.set(base_path + ['cache', peer, 'port', peer_config['port']]) - self.session.set(base_path + ['cache', peer, 'preference', peer_config['preference']]) - self.session.set(base_path + ['cache', peer, 'ssh', 'username', peer_config['username']]) - self.session.set(base_path + ['cache', peer, 'ssh', 'public-key-file', rpki_ssh_pub]) - self.session.set(base_path + ['cache', peer, 'ssh', 'private-key-file', rpki_ssh_key]) - self.session.set(base_path + ['cache', peer, 'ssh', 'known-hosts-file', rpki_known_hosts]) + self.cli_set(base_path + ['cache', peer, 'port', peer_config['port']]) + self.cli_set(base_path + ['cache', peer, 'preference', peer_config['preference']]) + self.cli_set(base_path + ['cache', peer, 'ssh', 'username', peer_config['username']]) + self.cli_set(base_path + ['cache', peer, 'ssh', 'public-key-file', rpki_ssh_pub]) + self.cli_set(base_path + ['cache', peer, 'ssh', 'private-key-file', rpki_ssh_key]) + self.cli_set(base_path + ['cache', peer, 'ssh', 'known-hosts-file', rpki_known_hosts]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR configuration - frrconfig = getFRRRPKIconfig() + frrconfig = self.getFRRconfig('rpki') self.assertIn(f'rpki polling_period {polling}', frrconfig) for peer, peer_config in cache.items(): @@ -140,12 +135,12 @@ class TestProtocolsRPKI(unittest.TestCase): } for peer, peer_config in cache.items(): - self.session.set(base_path + ['cache', peer, 'port', peer_config['port']]) - self.session.set(base_path + ['cache', peer, 'preference', peer_config['preference']]) + self.cli_set(base_path + ['cache', peer, 'port', peer_config['port']]) + self.cli_set(base_path + ['cache', peer, 'preference', peer_config['preference']]) # check validate() - preferences must be unique with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() if __name__ == '__main__': diff --git a/smoketest/scripts/cli/test_protocols_static.py b/smoketest/scripts/cli/test_protocols_static.py index cf591f060..75d3e6a42 100755 --- a/smoketest/scripts/cli/test_protocols_static.py +++ b/smoketest/scripts/cli/test_protocols_static.py @@ -14,23 +14,18 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.template import is_ipv6 -from vyos.util import cmd +from vyos.util import get_interface_config base_path = ['protocols', 'static'] vrf_path = ['protocols', 'vrf'] -def getFRRCconfig(vrf=None): - if vrf: - return cmd(f'vtysh -c "show run" | sed -n "/^vrf {vrf}/,/^!/p"') - else: - return cmd(f'vtysh -c "show run" | sed -n "/^ip route/,/^!/p"') - routes = { '10.0.0.0/8' : { 'next_hop' : { @@ -85,28 +80,25 @@ routes = { }, } -vrfs = ['red', 'green', 'blue'] tables = ['80', '81', '82'] -class StaticRouteTest(unittest.TestCase): +class StaticRouteTest(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) + # This is our "target" VRF when leaking routes: + self.cli_set(['vrf', 'name', 'black', 'table', '43210']) def tearDown(self): for route, route_config in routes.items(): route_type = 'route' if is_ipv6(route): route_type = 'route6' - self.session.delete(base_path + [route_type, route]) - - for vrf in vrfs: - self.session.delete(vrf_path + [vrf]) + self.cli_delete(base_path + [route_type, route]) for table in tables: - self.session.delete(base_path + ['table', table]) + self.cli_delete(base_path + ['table', table]) - self.session.commit() - del self.session + tmp = self.getFRRconfig('', end='') + self.cli_commit() def test_protocols_static(self): for route, route_config in routes.items(): @@ -116,39 +108,39 @@ class StaticRouteTest(unittest.TestCase): base = base_path + [route_type, route] if 'next_hop' in route_config: for next_hop, next_hop_config in route_config['next_hop'].items(): - self.session.set(base + ['next-hop', next_hop]) + self.cli_set(base + ['next-hop', next_hop]) if 'disable' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'disable']) + self.cli_set(base + ['next-hop', next_hop, 'disable']) if 'distance' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'distance', next_hop_config['distance']]) + self.cli_set(base + ['next-hop', next_hop, 'distance', next_hop_config['distance']]) if 'interface' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'interface', next_hop_config['interface']]) + self.cli_set(base + ['next-hop', next_hop, 'interface', next_hop_config['interface']]) if 'vrf' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'vrf', next_hop_config['vrf']]) + self.cli_set(base + ['next-hop', next_hop, 'vrf', next_hop_config['vrf']]) if 'interface' in route_config: for interface, interface_config in route_config['interface'].items(): - self.session.set(base + ['interface', interface]) + self.cli_set(base + ['interface', interface]) if 'disable' in interface_config: - self.session.set(base + ['interface', interface, 'disable']) + self.cli_set(base + ['interface', interface, 'disable']) if 'distance' in interface_config: - self.session.set(base + ['interface', interface, 'distance', interface_config['distance']]) + self.cli_set(base + ['interface', interface, 'distance', interface_config['distance']]) if 'vrf' in interface_config: - self.session.set(base + ['interface', interface, 'vrf', interface_config['vrf']]) + self.cli_set(base + ['interface', interface, 'vrf', interface_config['vrf']]) if 'blackhole' in route_config: - self.session.set(base + ['blackhole']) + self.cli_set(base + ['blackhole']) if 'distance' in route_config['blackhole']: - self.session.set(base + ['blackhole', 'distance', route_config['blackhole']['distance']]) + self.cli_set(base + ['blackhole', 'distance', route_config['blackhole']['distance']]) if 'tag' in route_config['blackhole']: - self.session.set(base + ['blackhole', 'tag', route_config['blackhole']['tag']]) + self.cli_set(base + ['blackhole', 'tag', route_config['blackhole']['tag']]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRCconfig() + frrconfig = self.getFRRconfig('ip route', end='') # Verify routes for route, route_config in routes.items(): @@ -205,39 +197,39 @@ class StaticRouteTest(unittest.TestCase): if 'next_hop' in route_config: for next_hop, next_hop_config in route_config['next_hop'].items(): - self.session.set(base + ['next-hop', next_hop]) + self.cli_set(base + ['next-hop', next_hop]) if 'disable' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'disable']) + self.cli_set(base + ['next-hop', next_hop, 'disable']) if 'distance' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'distance', next_hop_config['distance']]) + self.cli_set(base + ['next-hop', next_hop, 'distance', next_hop_config['distance']]) if 'interface' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'interface', next_hop_config['interface']]) + self.cli_set(base + ['next-hop', next_hop, 'interface', next_hop_config['interface']]) if 'vrf' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'vrf', next_hop_config['vrf']]) + self.cli_set(base + ['next-hop', next_hop, 'vrf', next_hop_config['vrf']]) if 'interface' in route_config: for interface, interface_config in route_config['interface'].items(): - self.session.set(base + ['interface', interface]) + self.cli_set(base + ['interface', interface]) if 'disable' in interface_config: - self.session.set(base + ['interface', interface, 'disable']) + self.cli_set(base + ['interface', interface, 'disable']) if 'distance' in interface_config: - self.session.set(base + ['interface', interface, 'distance', interface_config['distance']]) + self.cli_set(base + ['interface', interface, 'distance', interface_config['distance']]) if 'vrf' in interface_config: - self.session.set(base + ['interface', interface, 'vrf', interface_config['vrf']]) + self.cli_set(base + ['interface', interface, 'vrf', interface_config['vrf']]) if 'blackhole' in route_config: - self.session.set(base + ['blackhole']) + self.cli_set(base + ['blackhole']) if 'distance' in route_config['blackhole']: - self.session.set(base + ['blackhole', 'distance', route_config['blackhole']['distance']]) + self.cli_set(base + ['blackhole', 'distance', route_config['blackhole']['distance']]) if 'tag' in route_config['blackhole']: - self.session.set(base + ['blackhole', 'tag', route_config['blackhole']['tag']]) + self.cli_set(base + ['blackhole', 'tag', route_config['blackhole']['tag']]) # commit changes - self.session.commit() + self.cli_commit() # Verify FRR bgpd configuration - frrconfig = getFRRCconfig() + frrconfig = self.getFRRconfig('ip route', end='') for table in tables: # Verify routes @@ -290,49 +282,67 @@ class StaticRouteTest(unittest.TestCase): def test_protocols_vrf_static(self): - for vrf in vrfs: + # Create VRF instances and apply the static routes from above to FRR. + # Re-read the configured routes and match them if they are programmed + # properly. This also includes VRF leaking + vrfs = { + 'red' : { 'table' : '1000' }, + 'green' : { 'table' : '2000' }, + 'blue' : { 'table' : '3000' }, + } + + for vrf, vrf_config in vrfs.items(): + vrf_base_path = ['vrf', 'name', vrf] + self.cli_set(vrf_base_path + ['table', vrf_config['table']]) + for route, route_config in routes.items(): route_type = 'route' if is_ipv6(route): route_type = 'route6' - base = vrf_path + [vrf, 'static', route_type, route] + route_base_path = vrf_base_path + ['protocols', 'static', route_type, route] if 'next_hop' in route_config: for next_hop, next_hop_config in route_config['next_hop'].items(): - self.session.set(base + ['next-hop', next_hop]) + self.cli_set(route_base_path + ['next-hop', next_hop]) if 'disable' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'disable']) + self.cli_set(route_base_path + ['next-hop', next_hop, 'disable']) if 'distance' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'distance', next_hop_config['distance']]) + self.cli_set(route_base_path + ['next-hop', next_hop, 'distance', next_hop_config['distance']]) if 'interface' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'interface', next_hop_config['interface']]) + self.cli_set(route_base_path + ['next-hop', next_hop, 'interface', next_hop_config['interface']]) if 'vrf' in next_hop_config: - self.session.set(base + ['next-hop', next_hop, 'vrf', next_hop_config['vrf']]) + self.cli_set(route_base_path + ['next-hop', next_hop, 'vrf', next_hop_config['vrf']]) if 'interface' in route_config: for interface, interface_config in route_config['interface'].items(): - self.session.set(base + ['interface', interface]) + self.cli_set(route_base_path + ['interface', interface]) if 'disable' in interface_config: - self.session.set(base + ['interface', interface, 'disable']) + self.cli_set(route_base_path + ['interface', interface, 'disable']) if 'distance' in interface_config: - self.session.set(base + ['interface', interface, 'distance', interface_config['distance']]) + self.cli_set(route_base_path + ['interface', interface, 'distance', interface_config['distance']]) if 'vrf' in interface_config: - self.session.set(base + ['interface', interface, 'vrf', interface_config['vrf']]) + self.cli_set(route_base_path + ['interface', interface, 'vrf', interface_config['vrf']]) if 'blackhole' in route_config: - self.session.set(base + ['blackhole']) + self.cli_set(route_base_path + ['blackhole']) if 'distance' in route_config['blackhole']: - self.session.set(base + ['blackhole', 'distance', route_config['blackhole']['distance']]) + self.cli_set(route_base_path + ['blackhole', 'distance', route_config['blackhole']['distance']]) if 'tag' in route_config['blackhole']: - self.session.set(base + ['blackhole', 'tag', route_config['blackhole']['tag']]) + self.cli_set(route_base_path + ['blackhole', 'tag', route_config['blackhole']['tag']]) # commit changes - self.session.commit() + self.cli_commit() + + for vrf, vrf_config in vrfs.items(): + tmp = get_interface_config(vrf) + + # Compare VRF table ID + self.assertEqual(tmp['linkinfo']['info_data']['table'], int(vrf_config['table'])) + self.assertEqual(tmp['linkinfo']['info_kind'], 'vrf') - for vrf in vrfs: # Verify FRR bgpd configuration - frrconfig = getFRRCconfig(vrf) + frrconfig = self.getFRRconfig(f'vrf {vrf}') self.assertIn(f'vrf {vrf}', frrconfig) # Verify routes @@ -380,6 +390,7 @@ class StaticRouteTest(unittest.TestCase): self.assertIn(tmp, frrconfig) + self.cli_delete(['vrf']) if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_service_bcast-relay.py b/smoketest/scripts/cli/test_service_bcast-relay.py index 00d7750aa..58b730ab4 100755 --- a/smoketest/scripts/cli/test_service_bcast-relay.py +++ b/smoketest/scripts/cli/test_service_bcast-relay.py @@ -14,46 +14,46 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from psutil import process_iter -from vyos.configsession import ConfigSession, ConfigSessionError +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError base_path = ['service', 'broadcast-relay'] -class TestServiceBroadcastRelay(unittest.TestCase): +class TestServiceBroadcastRelay(VyOSUnitTestSHIM.TestCase): _address1 = '192.0.2.1/24' _address2 = '192.0.2.1/24' def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(['interfaces', 'dummy', 'dum1001', 'address', self._address1]) - self.session.set(['interfaces', 'dummy', 'dum1002', 'address', self._address2]) + self.cli_set(['interfaces', 'dummy', 'dum1001', 'address', self._address1]) + self.cli_set(['interfaces', 'dummy', 'dum1002', 'address', self._address2]) def tearDown(self): - self.session.delete(['interfaces', 'dummy', 'dum1001']) - self.session.delete(['interfaces', 'dummy', 'dum1002']) - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(['interfaces', 'dummy', 'dum1001']) + self.cli_delete(['interfaces', 'dummy', 'dum1002']) + self.cli_delete(base_path) + self.cli_commit() def test_broadcast_relay_service(self): ids = range(1, 5) for id in ids: base = base_path + ['id', str(id)] - self.session.set(base + ['description', 'vyos']) - self.session.set(base + ['port', str(10000 + id)]) + self.cli_set(base + ['description', 'vyos']) + self.cli_set(base + ['port', str(10000 + id)]) # check validate() - two interfaces must be present with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() - self.session.set(base + ['interface', 'dum1001']) - self.session.set(base + ['interface', 'dum1002']) - self.session.set(base + ['address', self._address1.split('/')[0]]) + self.cli_set(base + ['interface', 'dum1001']) + self.cli_set(base + ['interface', 'dum1002']) + self.cli_set(base + ['address', self._address1.split('/')[0]]) - self.session.commit() + self.cli_commit() for id in ids: # check if process is running diff --git a/smoketest/scripts/cli/test_service_dhcp-relay.py b/smoketest/scripts/cli/test_service_dhcp-relay.py index 676c4a481..db2edba54 100755 --- a/smoketest/scripts/cli/test_service_dhcp-relay.py +++ b/smoketest/scripts/cli/test_service_dhcp-relay.py @@ -14,14 +14,13 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import re -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.ifconfig import Section -from vyos.util import cmd from vyos.util import process_named_running from vyos.util import read_file @@ -29,14 +28,10 @@ PROCESS_NAME = 'dhcrelay' RELAY_CONF = '/run/dhcp-relay/dhcrelay.conf' base_path = ['service', 'dhcp-relay'] -class TestServiceDHCPRelay(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestServiceDHCPRelay(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_relay_default(self): max_size = '800' @@ -44,28 +39,28 @@ class TestServiceDHCPRelay(unittest.TestCase): agents_packets = 'append' servers = ['192.0.2.1', '192.0.2.2'] - self.session.set(base_path + ['interface', 'lo']) + self.cli_set(base_path + ['interface', 'lo']) # check validate() - DHCP relay does not support the loopback interface with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(base_path + ['interface', 'lo']) + self.cli_commit() + self.cli_delete(base_path + ['interface', 'lo']) # activate DHCP relay on all ethernet interfaces for tmp in Section.interfaces("ethernet"): - self.session.set(base_path + ['interface', tmp]) + self.cli_set(base_path + ['interface', tmp]) # check validate() - No DHCP relay server(s) configured with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() for server in servers: - self.session.set(base_path + ['server', server]) + self.cli_set(base_path + ['server', server]) - self.session.set(base_path + ['relay-options', 'max-size', max_size]) - self.session.set(base_path + ['relay-options', 'hop-count', hop_count]) - self.session.set(base_path + ['relay-options', 'relay-agents-packets', agents_packets]) + self.cli_set(base_path + ['relay-options', 'max-size', max_size]) + self.cli_set(base_path + ['relay-options', 'hop-count', hop_count]) + self.cli_set(base_path + ['relay-options', 'relay-agents-packets', agents_packets]) # commit changes - self.session.commit() + self.cli_commit() # Check configured port config = read_file(RELAY_CONF) diff --git a/smoketest/scripts/cli/test_service_dhcp-server.py b/smoketest/scripts/cli/test_service_dhcp-server.py index e74e22a5c..d3f6f21f1 100755 --- a/smoketest/scripts/cli/test_service_dhcp-server.py +++ b/smoketest/scripts/cli/test_service_dhcp-server.py @@ -14,13 +14,12 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import re -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError -from vyos.util import cmd from vyos.util import process_named_running from vyos.util import read_file from vyos.template import address_from_cidr @@ -37,17 +36,15 @@ dns_1 = inc_ip(subnet, 2) dns_2 = inc_ip(subnet, 3) domain_name = 'vyos.net' -class TestServiceDHCPServer(unittest.TestCase): +class TestServiceDHCPServer(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) cidr_mask = subnet.split('/')[-1] - self.session.set(['interfaces', 'dummy', 'dum8765', 'address', f'{router}/{cidr_mask}']) + self.cli_set(['interfaces', 'dummy', 'dum8765', 'address', f'{router}/{cidr_mask}']) def tearDown(self): - self.session.delete(['interfaces', 'dummy', 'dum8765']) - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(['interfaces', 'dummy', 'dum8765']) + self.cli_delete(base_path) + self.cli_commit() def test_dhcp_single_pool_range(self): shared_net_name = 'SMOKE-1' @@ -57,25 +54,25 @@ class TestServiceDHCPServer(unittest.TestCase): range_1_start = inc_ip(subnet, 40) range_1_stop = inc_ip(subnet, 50) - self.session.set(base_path + ['dynamic-dns-update']) + self.cli_set(base_path + ['dynamic-dns-update']) pool = base_path + ['shared-network-name', shared_net_name, 'subnet', subnet] # we use the first subnet IP address as default gateway - self.session.set(pool + ['default-router', router]) - self.session.set(pool + ['dns-server', dns_1]) - self.session.set(pool + ['dns-server', dns_2]) - self.session.set(pool + ['domain-name', domain_name]) + self.cli_set(pool + ['default-router', router]) + self.cli_set(pool + ['dns-server', dns_1]) + self.cli_set(pool + ['dns-server', dns_2]) + self.cli_set(pool + ['domain-name', domain_name]) # check validate() - No DHCP address range or active static-mapping set with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(pool + ['range', '0', 'start', range_0_start]) - self.session.set(pool + ['range', '0', 'stop', range_0_stop]) - self.session.set(pool + ['range', '1', 'start', range_1_start]) - self.session.set(pool + ['range', '1', 'stop', range_1_stop]) + self.cli_commit() + self.cli_set(pool + ['range', '0', 'start', range_0_start]) + self.cli_set(pool + ['range', '0', 'stop', range_0_stop]) + self.cli_set(pool + ['range', '1', 'start', range_1_start]) + self.cli_set(pool + ['range', '1', 'stop', range_1_stop]) # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) network = address_from_cidr(subnet) @@ -110,42 +107,42 @@ class TestServiceDHCPServer(unittest.TestCase): pool = base_path + ['shared-network-name', shared_net_name, 'subnet', subnet] # we use the first subnet IP address as default gateway - self.session.set(pool + ['default-router', router]) - self.session.set(pool + ['dns-server', dns_1]) - self.session.set(pool + ['dns-server', dns_2]) - self.session.set(pool + ['domain-name', domain_name]) - self.session.set(pool + ['ip-forwarding']) - self.session.set(pool + ['smtp-server', smtp_server]) - self.session.set(pool + ['pop-server', smtp_server]) - self.session.set(pool + ['time-server', time_server]) - self.session.set(pool + ['tftp-server-name', tftp_server]) + self.cli_set(pool + ['default-router', router]) + self.cli_set(pool + ['dns-server', dns_1]) + self.cli_set(pool + ['dns-server', dns_2]) + self.cli_set(pool + ['domain-name', domain_name]) + self.cli_set(pool + ['ip-forwarding']) + self.cli_set(pool + ['smtp-server', smtp_server]) + self.cli_set(pool + ['pop-server', smtp_server]) + self.cli_set(pool + ['time-server', time_server]) + self.cli_set(pool + ['tftp-server-name', tftp_server]) for search in search_domains: - self.session.set(pool + ['domain-search', search]) - self.session.set(pool + ['bootfile-name', bootfile_name]) - self.session.set(pool + ['bootfile-server', bootfile_server]) - self.session.set(pool + ['wpad-url', wpad]) - self.session.set(pool + ['server-identifier', server_identifier]) + self.cli_set(pool + ['domain-search', search]) + self.cli_set(pool + ['bootfile-name', bootfile_name]) + self.cli_set(pool + ['bootfile-server', bootfile_server]) + self.cli_set(pool + ['wpad-url', wpad]) + self.cli_set(pool + ['server-identifier', server_identifier]) - self.session.set(pool + ['static-route', 'destination-subnet', '10.0.0.0/24']) - self.session.set(pool + ['static-route', 'router', '192.0.2.1']) + self.cli_set(pool + ['static-route', 'destination-subnet', '10.0.0.0/24']) + self.cli_set(pool + ['static-route', 'router', '192.0.2.1']) # check validate() - No DHCP address range or active static-mapping set with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(pool + ['range', '0', 'start', range_0_start]) - self.session.set(pool + ['range', '0', 'stop', range_0_stop]) + self.cli_commit() + self.cli_set(pool + ['range', '0', 'start', range_0_start]) + self.cli_set(pool + ['range', '0', 'stop', range_0_stop]) # failover failover_local = router failover_remote = inc_ip(router, 1) - self.session.set(pool + ['failover', 'local-address', failover_local]) - self.session.set(pool + ['failover', 'name', shared_net_name]) - self.session.set(pool + ['failover', 'peer-address', failover_remote]) - self.session.set(pool + ['failover', 'status', 'primary']) + self.cli_set(pool + ['failover', 'local-address', failover_local]) + self.cli_set(pool + ['failover', 'name', shared_net_name]) + self.cli_set(pool + ['failover', 'peer-address', failover_remote]) + self.cli_set(pool + ['failover', 'status', 'primary']) # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) @@ -204,24 +201,24 @@ class TestServiceDHCPServer(unittest.TestCase): pool = base_path + ['shared-network-name', shared_net_name, 'subnet', subnet] # we use the first subnet IP address as default gateway - self.session.set(pool + ['default-router', router]) - self.session.set(pool + ['dns-server', dns_1]) - self.session.set(pool + ['dns-server', dns_2]) - self.session.set(pool + ['domain-name', domain_name]) + self.cli_set(pool + ['default-router', router]) + self.cli_set(pool + ['dns-server', dns_1]) + self.cli_set(pool + ['dns-server', dns_2]) + self.cli_set(pool + ['domain-name', domain_name]) # check validate() - No DHCP address range or active static-mapping set with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() client_base = 10 for client in ['client1', 'client2', 'client3']: mac = '00:50:00:00:00:{}'.format(client_base) - self.session.set(pool + ['static-mapping', client, 'mac-address', mac]) - self.session.set(pool + ['static-mapping', client, 'ip-address', inc_ip(subnet, client_base)]) + self.cli_set(pool + ['static-mapping', client, 'mac-address', mac]) + self.cli_set(pool + ['static-mapping', client, 'ip-address', inc_ip(subnet, client_base)]) client_base += 1 # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) network = address_from_cidr(subnet) @@ -264,25 +261,25 @@ class TestServiceDHCPServer(unittest.TestCase): pool = base_path + ['shared-network-name', shared_net_name, 'subnet', subnet] # we use the first subnet IP address as default gateway - self.session.set(pool + ['default-router', router]) - self.session.set(pool + ['dns-server', dns_1]) - self.session.set(pool + ['domain-name', domain_name]) - self.session.set(pool + ['lease', lease_time]) + self.cli_set(pool + ['default-router', router]) + self.cli_set(pool + ['dns-server', dns_1]) + self.cli_set(pool + ['domain-name', domain_name]) + self.cli_set(pool + ['lease', lease_time]) - self.session.set(pool + ['range', '0', 'start', range_0_start]) - self.session.set(pool + ['range', '0', 'stop', range_0_stop]) - self.session.set(pool + ['range', '1', 'start', range_1_start]) - self.session.set(pool + ['range', '1', 'stop', range_1_stop]) + self.cli_set(pool + ['range', '0', 'start', range_0_start]) + self.cli_set(pool + ['range', '0', 'stop', range_0_stop]) + self.cli_set(pool + ['range', '1', 'start', range_1_start]) + self.cli_set(pool + ['range', '1', 'stop', range_1_stop]) client_base = 60 for client in ['client1', 'client2', 'client3', 'client4']: mac = '02:50:00:00:00:{}'.format(client_base) - self.session.set(pool + ['static-mapping', client, 'mac-address', mac]) - self.session.set(pool + ['static-mapping', client, 'ip-address', inc_ip(subnet, client_base)]) + self.cli_set(pool + ['static-mapping', client, 'mac-address', mac]) + self.cli_set(pool + ['static-mapping', client, 'ip-address', inc_ip(subnet, client_base)]) client_base += 1 # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) for network in ['0', '1', '2', '3']: @@ -329,13 +326,13 @@ class TestServiceDHCPServer(unittest.TestCase): range_0_stop = inc_ip(subnet, 20) pool = base_path + ['shared-network-name', 'EXCLUDE-TEST', 'subnet', subnet] - self.session.set(pool + ['default-router', router]) - self.session.set(pool + ['exclude', router]) - self.session.set(pool + ['range', '0', 'start', range_0_start]) - self.session.set(pool + ['range', '0', 'stop', range_0_stop]) + self.cli_set(pool + ['default-router', router]) + self.cli_set(pool + ['exclude', router]) + self.cli_set(pool + ['range', '0', 'start', range_0_start]) + self.cli_set(pool + ['range', '0', 'stop', range_0_stop]) # commit changes - self.session.commit() + self.cli_commit() # VErify config = read_file(DHCPD_CONF) @@ -362,13 +359,13 @@ class TestServiceDHCPServer(unittest.TestCase): range_0_start_excl = inc_ip(exclude_addr, 1) pool = base_path + ['shared-network-name', 'EXCLUDE-TEST-2', 'subnet', subnet] - self.session.set(pool + ['default-router', router]) - self.session.set(pool + ['exclude', exclude_addr]) - self.session.set(pool + ['range', '0', 'start', range_0_start]) - self.session.set(pool + ['range', '0', 'stop', range_0_stop]) + self.cli_set(pool + ['default-router', router]) + self.cli_set(pool + ['exclude', exclude_addr]) + self.cli_set(pool + ['range', '0', 'start', range_0_start]) + self.cli_set(pool + ['range', '0', 'stop', range_0_stop]) # commit changes - self.session.commit() + self.cli_commit() # Verify config = read_file(DHCPD_CONF) @@ -386,7 +383,7 @@ class TestServiceDHCPServer(unittest.TestCase): def test_dhcp_relay_server(self): # Listen on specific address and return DHCP leases from a non # directly connected pool - self.session.set(base_path + ['listen-address', router]) + self.cli_set(base_path + ['listen-address', router]) relay_subnet = '10.0.0.0/16' relay_router = inc_ip(relay_subnet, 1) @@ -395,12 +392,12 @@ class TestServiceDHCPServer(unittest.TestCase): range_0_stop = '10.0.250.255' pool = base_path + ['shared-network-name', 'RELAY', 'subnet', relay_subnet] - self.session.set(pool + ['default-router', relay_router]) - self.session.set(pool + ['range', '0', 'start', range_0_start]) - self.session.set(pool + ['range', '0', 'stop', range_0_stop]) + self.cli_set(pool + ['default-router', relay_router]) + self.cli_set(pool + ['range', '0', 'start', range_0_start]) + self.cli_set(pool + ['range', '0', 'stop', range_0_stop]) # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) network = address_from_cidr(subnet) diff --git a/smoketest/scripts/cli/test_service_dhcpv6-relay.py b/smoketest/scripts/cli/test_service_dhcpv6-relay.py index e36c237bc..5a9dd1aa6 100755 --- a/smoketest/scripts/cli/test_service_dhcpv6-relay.py +++ b/smoketest/scripts/cli/test_service_dhcpv6-relay.py @@ -14,15 +14,14 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import re -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.ifconfig import Section from vyos.template import address_from_cidr -from vyos.util import cmd from vyos.util import process_named_running from vyos.util import read_file @@ -35,52 +34,50 @@ upstream_if_addr = '2001:db8::1/64' listen_addr = '2001:db8:ffff::1/64' interfaces = [] -class TestServiceDHCPv6Relay(unittest.TestCase): +class TestServiceDHCPv6Relay(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) for tmp in interfaces: listen = listen_addr if tmp == upstream_if: listen = upstream_if_addr - self.session.set(['interfaces', 'ethernet', tmp, 'address', listen]) + self.cli_set(['interfaces', 'ethernet', tmp, 'address', listen]) def tearDown(self): - self.session.delete(base_path) + self.cli_delete(base_path) for tmp in interfaces: listen = listen_addr if tmp == upstream_if: listen = upstream_if_addr - self.session.delete(['interfaces', 'ethernet', tmp, 'address', listen]) + self.cli_delete(['interfaces', 'ethernet', tmp, 'address', listen]) - self.session.commit() - del self.session + self.cli_commit() def test_relay_default(self): dhcpv6_server = '2001:db8::ffff' hop_count = '20' - self.session.set(base_path + ['use-interface-id-option']) - self.session.set(base_path + ['max-hop-count', hop_count]) + self.cli_set(base_path + ['use-interface-id-option']) + self.cli_set(base_path + ['max-hop-count', hop_count]) # check validate() - Must set at least one listen and upstream # interface addresses. with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['upstream-interface', upstream_if, 'address', dhcpv6_server]) + self.cli_commit() + self.cli_set(base_path + ['upstream-interface', upstream_if, 'address', dhcpv6_server]) # check validate() - Must set at least one listen and upstream # interface addresses. with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() # add listener on all ethernet interfaces except the upstream interface for tmp in interfaces: if tmp == upstream_if: continue - self.session.set(base_path + ['listen-interface', tmp, 'address', listen_addr.split('/')[0]]) + self.cli_set(base_path + ['listen-interface', tmp, 'address', listen_addr.split('/')[0]]) # commit changes - self.session.commit() + self.cli_commit() # Check configured port config = read_file(RELAY_CONF) diff --git a/smoketest/scripts/cli/test_service_dhcpv6-server.py b/smoketest/scripts/cli/test_service_dhcpv6-server.py index a364eee11..e85a055c7 100755 --- a/smoketest/scripts/cli/test_service_dhcpv6-server.py +++ b/smoketest/scripts/cli/test_service_dhcpv6-server.py @@ -14,14 +14,13 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import re -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.template import inc_ip -from vyos.util import cmd from vyos.util import process_named_running from vyos.util import read_file @@ -37,16 +36,14 @@ nis_servers = ['2001:db8:ffff::1', '2001:db8:ffff::2'] interface = 'eth1' interface_addr = inc_ip(subnet, 1) + '/64' -class TestServiceDHCPServer(unittest.TestCase): +class TestServiceDHCPServer(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(['interfaces', 'ethernet', interface, 'address', interface_addr]) + self.cli_set(['interfaces', 'ethernet', interface, 'address', interface_addr]) def tearDown(self): - self.session.delete(base_path) - self.session.delete(['interfaces', 'ethernet', interface, 'address', interface_addr]) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_delete(['interfaces', 'ethernet', interface, 'address', interface_addr]) + self.cli_commit() def test_single_pool(self): shared_net_name = 'SMOKE-1' @@ -62,37 +59,37 @@ class TestServiceDHCPServer(unittest.TestCase): pool = base_path + ['shared-network-name', shared_net_name, 'subnet', subnet] - self.session.set(base_path + ['preference', preference]) + self.cli_set(base_path + ['preference', preference]) # we use the first subnet IP address as default gateway - self.session.set(pool + ['name-server', dns_1]) - self.session.set(pool + ['name-server', dns_2]) - self.session.set(pool + ['name-server', dns_2]) - self.session.set(pool + ['lease-time', 'default', lease_time]) - self.session.set(pool + ['lease-time', 'maximum', max_lease_time]) - self.session.set(pool + ['lease-time', 'minimum', min_lease_time]) - self.session.set(pool + ['nis-domain', domain]) - self.session.set(pool + ['nisplus-domain', domain]) - self.session.set(pool + ['sip-server', sip_server]) - self.session.set(pool + ['sntp-server', sntp_server]) - self.session.set(pool + ['address-range', 'start', range_start, 'stop', range_stop]) + self.cli_set(pool + ['name-server', dns_1]) + self.cli_set(pool + ['name-server', dns_2]) + self.cli_set(pool + ['name-server', dns_2]) + self.cli_set(pool + ['lease-time', 'default', lease_time]) + self.cli_set(pool + ['lease-time', 'maximum', max_lease_time]) + self.cli_set(pool + ['lease-time', 'minimum', min_lease_time]) + self.cli_set(pool + ['nis-domain', domain]) + self.cli_set(pool + ['nisplus-domain', domain]) + self.cli_set(pool + ['sip-server', sip_server]) + self.cli_set(pool + ['sntp-server', sntp_server]) + self.cli_set(pool + ['address-range', 'start', range_start, 'stop', range_stop]) for server in nis_servers: - self.session.set(pool + ['nis-server', server]) - self.session.set(pool + ['nisplus-server', server]) + self.cli_set(pool + ['nis-server', server]) + self.cli_set(pool + ['nisplus-server', server]) for search in search_domains: - self.session.set(pool + ['domain-search', search]) + self.cli_set(pool + ['domain-search', search]) client_base = 1 for client in ['client1', 'client2', 'client3']: cid = '00:01:00:01:12:34:56:78:aa:bb:cc:dd:ee:{}'.format(client_base) - self.session.set(pool + ['static-mapping', client, 'identifier', cid]) - self.session.set(pool + ['static-mapping', client, 'ipv6-address', inc_ip(subnet, client_base)]) + self.cli_set(pool + ['static-mapping', client, 'identifier', cid]) + self.cli_set(pool + ['static-mapping', client, 'ipv6-address', inc_ip(subnet, client_base)]) client_base += 1 # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) self.assertIn(f'option dhcp6.preference {preference};', config) @@ -136,12 +133,12 @@ class TestServiceDHCPServer(unittest.TestCase): pool = base_path + ['shared-network-name', shared_net_name, 'subnet', subnet] - self.session.set(pool + ['address-range', 'start', range_start, 'stop', range_stop]) - self.session.set(pool + ['prefix-delegation', 'start', delegate_start, 'stop', delegate_stop]) - self.session.set(pool + ['prefix-delegation', 'start', delegate_start, 'prefix-length', delegate_len]) + self.cli_set(pool + ['address-range', 'start', range_start, 'stop', range_stop]) + self.cli_set(pool + ['prefix-delegation', 'start', delegate_start, 'stop', delegate_stop]) + self.cli_set(pool + ['prefix-delegation', 'start', delegate_start, 'prefix-length', delegate_len]) # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) self.assertIn(f'subnet6 {subnet}' + r' {', config) @@ -156,12 +153,12 @@ class TestServiceDHCPServer(unittest.TestCase): ns_global_1 = '2001:db8::1111' ns_global_2 = '2001:db8::2222' - self.session.set(base_path + ['global-parameters', 'name-server', ns_global_1]) - self.session.set(base_path + ['global-parameters', 'name-server', ns_global_2]) - self.session.set(base_path + ['shared-network-name', shared_net_name, 'subnet', subnet]) + self.cli_set(base_path + ['global-parameters', 'name-server', ns_global_1]) + self.cli_set(base_path + ['global-parameters', 'name-server', ns_global_2]) + self.cli_set(base_path + ['shared-network-name', shared_net_name, 'subnet', subnet]) # commit changes - self.session.commit() + self.cli_commit() config = read_file(DHCPD_CONF) self.assertIn(f'option dhcp6.name-servers {ns_global_1};', config) diff --git a/smoketest/scripts/cli/test_service_dns_dynamic.py b/smoketest/scripts/cli/test_service_dns_dynamic.py index 83eede64a..d8a87ffd4 100755 --- a/smoketest/scripts/cli/test_service_dns_dynamic.py +++ b/smoketest/scripts/cli/test_service_dns_dynamic.py @@ -18,10 +18,11 @@ import re import os import unittest -from getpass import getuser +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError -from vyos.util import read_file +from vyos.util import cmd from vyos.util import process_named_running PROCESS_NAME = 'ddclient' @@ -29,21 +30,17 @@ DDCLIENT_CONF = '/run/ddclient/ddclient.conf' base_path = ['service', 'dns', 'dynamic'] def get_config_value(key): - tmp = read_file(DDCLIENT_CONF) + tmp = cmd(f'sudo cat {DDCLIENT_CONF}') tmp = re.findall(r'\n?{}=+(.*)'.format(key), tmp) tmp = tmp[0].rstrip(',') return tmp -class TestServiceDDNS(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) +class TestServiceDDNS(VyOSUnitTestSHIM.TestCase): def tearDown(self): # Delete DDNS configuration - self.session.delete(base_path) - self.session.commit() - - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_dyndns_service(self): ddns = ['interface', 'eth0', 'service'] @@ -53,45 +50,44 @@ class TestServiceDDNS(unittest.TestCase): user = 'vyos_user' password = 'vyos_pass' zone = 'vyos.io' - self.session.delete(base_path) - self.session.set(base_path + ddns + [service, 'host-name', 'test.ddns.vyos.io']) - self.session.set(base_path + ddns + [service, 'login', user]) - self.session.set(base_path + ddns + [service, 'password', password]) - self.session.set(base_path + ddns + [service, 'zone', zone]) + self.cli_delete(base_path) + self.cli_set(base_path + ddns + [service, 'host-name', 'test.ddns.vyos.io']) + self.cli_set(base_path + ddns + [service, 'login', user]) + self.cli_set(base_path + ddns + [service, 'password', password]) + self.cli_set(base_path + ddns + [service, 'zone', zone]) # commit changes if service == 'cloudflare': - self.session.commit() + self.cli_commit() else: # zone option only works on cloudflare, an exception is raised # for all others with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(base_path + ddns + [service, 'zone', 'vyos.io']) + self.cli_commit() + self.cli_delete(base_path + ddns + [service, 'zone', 'vyos.io']) # commit changes again - now it should work - self.session.commit() + self.cli_commit() # we can only read the configuration file when we operate as 'root' - if getuser() == 'root': - protocol = get_config_value('protocol') - login = get_config_value('login') - pwd = get_config_value('password') - - # some services need special treatment - protoname = service - if service == 'cloudflare': - tmp = get_config_value('zone') - self.assertTrue(tmp == zone) - elif service == 'afraid': - protoname = 'freedns' - elif service == 'dyndns': - protoname = 'dyndns2' - elif service == 'zoneedit': - protoname = 'zoneedit1' - - self.assertTrue(protocol == protoname) - self.assertTrue(login == user) - self.assertTrue(pwd == "'" + password + "'") + protocol = get_config_value('protocol') + login = get_config_value('login') + pwd = get_config_value('password') + + # some services need special treatment + protoname = service + if service == 'cloudflare': + tmp = get_config_value('zone') + self.assertTrue(tmp == zone) + elif service == 'afraid': + protoname = 'freedns' + elif service == 'dyndns': + protoname = 'dyndns2' + elif service == 'zoneedit': + protoname = 'zoneedit1' + + self.assertTrue(protocol == protoname) + self.assertTrue(login == user) + self.assertTrue(pwd == "'" + password + "'") # Check for running process self.assertTrue(process_named_running(PROCESS_NAME)) @@ -101,11 +97,11 @@ class TestServiceDDNS(unittest.TestCase): ddns = ['interface', 'eth0', 'rfc2136', 'vyos'] ddns_key_file = '/config/auth/my.key' - self.session.set(base_path + ddns + ['key', ddns_key_file]) - self.session.set(base_path + ddns + ['record', 'test.ddns.vyos.io']) - self.session.set(base_path + ddns + ['server', 'ns1.vyos.io']) - self.session.set(base_path + ddns + ['ttl', '300']) - self.session.set(base_path + ddns + ['zone', 'vyos.io']) + self.cli_set(base_path + ddns + ['key', ddns_key_file]) + self.cli_set(base_path + ddns + ['record', 'test.ddns.vyos.io']) + self.cli_set(base_path + ddns + ['server', 'ns1.vyos.io']) + self.cli_set(base_path + ddns + ['ttl', '300']) + self.cli_set(base_path + ddns + ['zone', 'vyos.io']) # ensure an exception will be raised as no key is present if os.path.exists(ddns_key_file): @@ -113,13 +109,13 @@ class TestServiceDDNS(unittest.TestCase): # check validate() - the key file does not exist yet with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() with open(ddns_key_file, 'w') as f: f.write('S3cretKey') # commit changes - self.session.commit() + self.cli_commit() # TODO: inspect generated configuration file diff --git a/smoketest/scripts/cli/test_service_dns_forwarding.py b/smoketest/scripts/cli/test_service_dns_forwarding.py index ada53e8dd..8005eb319 100755 --- a/smoketest/scripts/cli/test_service_dns_forwarding.py +++ b/smoketest/scripts/cli/test_service_dns_forwarding.py @@ -15,10 +15,12 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. import re -import os import unittest -from vyos.configsession import ConfigSession, ConfigSessionError +from base_vyostest_shim import VyOSUnitTestSHIM + +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError from vyos.util import read_file from vyos.util import process_named_running @@ -37,44 +39,40 @@ def get_config_value(key, file=CONFIG_FILE): tmp = re.findall(r'\n{}=+(.*)'.format(key), tmp) return tmp[0] -class TestServicePowerDNS(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestServicePowerDNS(VyOSUnitTestSHIM.TestCase): def tearDown(self): # Delete DNS forwarding configuration - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_basic_forwarding(self): # Check basic DNS forwarding settings cache_size = '20' negative_ttl = '120' - self.session.set(base_path + ['cache-size', cache_size]) - self.session.set(base_path + ['negative-ttl', negative_ttl]) + self.cli_set(base_path + ['cache-size', cache_size]) + self.cli_set(base_path + ['negative-ttl', negative_ttl]) # check validate() - allow from must be defined with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() for network in allow_from: - self.session.set(base_path + ['allow-from', network]) + self.cli_set(base_path + ['allow-from', network]) # check validate() - listen-address must be defined with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() for address in listen_adress: - self.session.set(base_path + ['listen-address', address]) + self.cli_set(base_path + ['listen-address', address]) # configure DNSSEC - self.session.set(base_path + ['dnssec', 'validate']) + self.cli_set(base_path + ['dnssec', 'validate']) # Do not use local /etc/hosts file in name resolution - self.session.set(base_path + ['ignore-hosts-file']) + self.cli_set(base_path + ['ignore-hosts-file']) # commit changes - self.session.commit() + self.cli_commit() # Check configured cache-size tmp = get_config_value('max-cache-entries') @@ -103,16 +101,16 @@ class TestServicePowerDNS(unittest.TestCase): # DNSSEC option testing for network in allow_from: - self.session.set(base_path + ['allow-from', network]) + self.cli_set(base_path + ['allow-from', network]) for address in listen_adress: - self.session.set(base_path + ['listen-address', address]) + self.cli_set(base_path + ['listen-address', address]) options = ['off', 'process-no-validate', 'process', 'log-fail', 'validate'] for option in options: - self.session.set(base_path + ['dnssec', option]) + self.cli_set(base_path + ['dnssec', option]) # commit changes - self.session.commit() + self.cli_commit() tmp = get_config_value('dnssec') self.assertEqual(tmp, option) @@ -124,16 +122,16 @@ class TestServicePowerDNS(unittest.TestCase): # Externe Domain Name Servers (DNS) addresses for network in allow_from: - self.session.set(base_path + ['allow-from', network]) + self.cli_set(base_path + ['allow-from', network]) for address in listen_adress: - self.session.set(base_path + ['listen-address', address]) + self.cli_set(base_path + ['listen-address', address]) nameservers = ['192.0.2.1', '192.0.2.2'] for nameserver in nameservers: - self.session.set(base_path + ['name-server', nameserver]) + self.cli_set(base_path + ['name-server', nameserver]) # commit changes - self.session.commit() + self.cli_commit() tmp = get_config_value(r'\+.', file=FORWARD_FILE) self.assertEqual(tmp, ', '.join(nameservers)) @@ -148,26 +146,26 @@ class TestServicePowerDNS(unittest.TestCase): def test_domain_forwarding(self): for network in allow_from: - self.session.set(base_path + ['allow-from', network]) + self.cli_set(base_path + ['allow-from', network]) for address in listen_adress: - self.session.set(base_path + ['listen-address', address]) + self.cli_set(base_path + ['listen-address', address]) domains = ['vyos.io', 'vyos.net', 'vyos.com'] nameservers = ['192.0.2.1', '192.0.2.2'] for domain in domains: for nameserver in nameservers: - self.session.set(base_path + ['domain', domain, 'server', nameserver]) + self.cli_set(base_path + ['domain', domain, 'server', nameserver]) # Test 'recursion-desired' flag for only one domain if domain == domains[0]: - self.session.set(base_path + ['domain', domain, 'recursion-desired']) + self.cli_set(base_path + ['domain', domain, 'recursion-desired']) # Test 'negative trust anchor' flag for the second domain only if domain == domains[1]: - self.session.set(base_path + ['domain', domain, 'addnta']) + self.cli_set(base_path + ['domain', domain, 'addnta']) # commit changes - self.session.commit() + self.cli_commit() # Test configured name-servers hosts_conf = read_file(HOSTSD_FILE) diff --git a/smoketest/scripts/cli/test_service_https.py b/smoketest/scripts/cli/test_service_https.py index fd0f6bfbd..3ed7655e9 100755 --- a/smoketest/scripts/cli/test_service_https.py +++ b/smoketest/scripts/cli/test_service_https.py @@ -14,28 +14,27 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.util import run base_path = ['service', 'https'] -class TestHTTPSService(unittest.TestCase): +class TestHTTPSService(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) # ensure we can also run this test on a live system - so lets clean # out the current configuration :) - self.session.delete(base_path) + self.cli_delete(base_path) def tearDown(self): - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() def test_default(self): - self.session.set(base_path) - self.session.commit() + self.cli_set(base_path) + self.cli_commit() ret = run('sudo /usr/sbin/nginx -t') self.assertEqual(ret, 0) @@ -48,11 +47,11 @@ class TestHTTPSService(unittest.TestCase): test_path = base_path + ['virtual-host', vhost_id] - self.session.set(test_path + ['listen-address', address]) - self.session.set(test_path + ['listen-port', port]) - self.session.set(test_path + ['server-name', name]) + self.cli_set(test_path + ['listen-address', address]) + self.cli_set(test_path + ['listen-port', port]) + self.cli_set(test_path + ['server-name', name]) - self.session.commit() + self.cli_commit() ret = run('sudo /usr/sbin/nginx -t') self.assertEqual(ret, 0) diff --git a/smoketest/scripts/cli/test_service_mdns-repeater.py b/smoketest/scripts/cli/test_service_mdns-repeater.py index e6986b92a..b1092c3e5 100755 --- a/smoketest/scripts/cli/test_service_mdns-repeater.py +++ b/smoketest/scripts/cli/test_service_mdns-repeater.py @@ -14,35 +14,32 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.util import process_named_running base_path = ['service', 'mdns', 'repeater'] intf_base = ['interfaces', 'dummy'] -class TestServiceMDNSrepeater(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestServiceMDNSrepeater(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.delete(intf_base + ['dum10']) - self.session.delete(intf_base + ['dum20']) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_delete(intf_base + ['dum10']) + self.cli_delete(intf_base + ['dum20']) + self.cli_commit() def test_service(self): # Service required a configured IP address on the interface - self.session.set(intf_base + ['dum10', 'address', '192.0.2.1/30']) - self.session.set(intf_base + ['dum20', 'address', '192.0.2.5/30']) + self.cli_set(intf_base + ['dum10', 'address', '192.0.2.1/30']) + self.cli_set(intf_base + ['dum20', 'address', '192.0.2.5/30']) - self.session.set(base_path + ['interface', 'dum10']) - self.session.set(base_path + ['interface', 'dum20']) - self.session.commit() + self.cli_set(base_path + ['interface', 'dum10']) + self.cli_set(base_path + ['interface', 'dum20']) + self.cli_commit() # Check for running process self.assertTrue(process_named_running('mdns-repeater')) diff --git a/smoketest/scripts/cli/test_service_pppoe-server.py b/smoketest/scripts/cli/test_service_pppoe-server.py index e8f9facbb..2b11ee362 100755 --- a/smoketest/scripts/cli/test_service_pppoe-server.py +++ b/smoketest/scripts/cli/test_service_pppoe-server.py @@ -27,7 +27,7 @@ local_if = ['interfaces', 'dummy', 'dum667'] ac_name = 'ACN' interface = 'eth0' -class TestServicePPPoEServer(BasicAccelPPPTest.BaseTest): +class TestServicePPPoEServer(BasicAccelPPPTest.TestCase): def setUp(self): self._base_path = ['service', 'pppoe-server'] self._process_name = 'accel-pppd' @@ -37,7 +37,7 @@ class TestServicePPPoEServer(BasicAccelPPPTest.BaseTest): super().setUp() def tearDown(self): - self.session.delete(local_if) + self.cli_delete(local_if) super().tearDown() def verify(self, conf): @@ -66,7 +66,7 @@ class TestServicePPPoEServer(BasicAccelPPPTest.BaseTest): super().verify(conf) def basic_config(self): - self.session.set(local_if + ['address', '192.0.2.1/32']) + self.cli_set(local_if + ['address', '192.0.2.1/32']) self.set(['access-concentrator', ac_name]) self.set(['interface', interface]) @@ -92,7 +92,7 @@ class TestServicePPPoEServer(BasicAccelPPPTest.BaseTest): self.set(['ppp-options', 'mru', mru]) # commit changes - self.session.commit() + self.cli_commit() # Validate configuration values conf = ConfigParser(allow_no_value=True, delimiters='=') @@ -124,7 +124,7 @@ class TestServicePPPoEServer(BasicAccelPPPTest.BaseTest): self.set( ['authentication', 'protocols', 'mschap-v2']) # commit changes - self.session.commit() + self.cli_commit() # Validate configuration values conf = ConfigParser(allow_no_value=True) @@ -150,7 +150,7 @@ class TestServicePPPoEServer(BasicAccelPPPTest.BaseTest): self.set(['client-ip-pool', 'stop', stop]) # commit changes - self.session.commit() + self.cli_commit() # Validate configuration values conf = ConfigParser(allow_no_value=True) @@ -187,7 +187,7 @@ class TestServicePPPoEServer(BasicAccelPPPTest.BaseTest): self.set(['client-ipv6-pool', 'delegate', delegate_prefix, 'delegation-prefix', delegate_mask]) # commit changes - self.session.commit() + self.cli_commit() # Validate configuration values conf = ConfigParser(allow_no_value=True, delimiters='=') diff --git a/smoketest/scripts/cli/test_service_router-advert.py b/smoketest/scripts/cli/test_service_router-advert.py index b80eb3c43..b19c49c6e 100755 --- a/smoketest/scripts/cli/test_service_router-advert.py +++ b/smoketest/scripts/cli/test_service_router-advert.py @@ -15,9 +15,10 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. import re -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.util import read_file from vyos.util import process_named_running @@ -33,26 +34,24 @@ def get_config_value(key): tmp = re.findall(r'\n?{}\s+(.*)'.format(key), tmp) return tmp[0].split()[0].replace(';','') -class TestServiceRADVD(unittest.TestCase): +class TestServiceRADVD(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(address_base + ['2001:db8::1/64']) + self.cli_set(address_base + ['2001:db8::1/64']) def tearDown(self): - self.session.delete(address_base) - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(address_base) + self.cli_delete(base_path) + self.cli_commit() def test_single(self): - self.session.set(base_path + ['prefix', '::/64', 'no-on-link-flag']) - self.session.set(base_path + ['prefix', '::/64', 'no-autonomous-flag']) - self.session.set(base_path + ['prefix', '::/64', 'valid-lifetime', 'infinity']) - self.session.set(base_path + ['dnssl', '2001:db8::1234']) - self.session.set(base_path + ['other-config-flag']) + self.cli_set(base_path + ['prefix', '::/64', 'no-on-link-flag']) + self.cli_set(base_path + ['prefix', '::/64', 'no-autonomous-flag']) + self.cli_set(base_path + ['prefix', '::/64', 'valid-lifetime', 'infinity']) + self.cli_set(base_path + ['dnssl', '2001:db8::1234']) + self.cli_set(base_path + ['other-config-flag']) # commit changes - self.session.commit() + self.cli_commit() # verify values tmp = get_config_value('interface') diff --git a/smoketest/scripts/cli/test_service_snmp.py b/smoketest/scripts/cli/test_service_snmp.py index 81045d0b4..008271102 100755 --- a/smoketest/scripts/cli/test_service_snmp.py +++ b/smoketest/scripts/cli/test_service_snmp.py @@ -14,10 +14,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import re import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError @@ -35,15 +35,11 @@ def get_config_value(key): tmp = re.findall(r'\n?{}\s+(.*)'.format(key), tmp) return tmp[0] -class TestSNMPService(unittest.TestCase): +class TestSNMPService(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) # ensure we can also run this test on a live system - so lets clean # out the current configuration :) - self.session.delete(base_path) - - def tearDown(self): - del self.session + self.cli_delete(base_path) def test_snmp_basic(self): # Check if SNMP can be configured and service runs @@ -53,19 +49,19 @@ class TestSNMPService(unittest.TestCase): for auth in ['ro', 'rw']: community = 'VyOS' + auth - self.session.set(base_path + ['community', community, 'authorization', auth]) + self.cli_set(base_path + ['community', community, 'authorization', auth]) for client in clients: - self.session.set(base_path + ['community', community, 'client', client]) + self.cli_set(base_path + ['community', community, 'client', client]) for network in networks: - self.session.set(base_path + ['community', community, 'network', network]) + self.cli_set(base_path + ['community', community, 'network', network]) for addr in listen: - self.session.set(base_path + ['listen-address', addr]) + self.cli_set(base_path + ['listen-address', addr]) - self.session.set(base_path + ['contact', 'maintainers@vyos.io']) - self.session.set(base_path + ['location', 'qemu']) + self.cli_set(base_path + ['contact', 'maintainers@vyos.io']) + self.cli_set(base_path + ['location', 'qemu']) - self.session.commit() + self.cli_commit() # verify listen address, it will be returned as # ['unix:/run/snmpd.socket,udp:127.0.0.1:161,udp6:[::1]:161'] @@ -88,30 +84,30 @@ class TestSNMPService(unittest.TestCase): # Check if SNMPv3 can be configured with SHA authentication # and service runs - self.session.set(base_path + ['v3', 'engineid', '000000000000000000000002']) - self.session.set(base_path + ['v3', 'group', 'default', 'mode', 'ro']) + self.cli_set(base_path + ['v3', 'engineid', '000000000000000000000002']) + self.cli_set(base_path + ['v3', 'group', 'default', 'mode', 'ro']) # check validate() - a view must be created before this can be comitted with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() - self.session.set(base_path + ['v3', 'view', 'default', 'oid', '1']) - self.session.set(base_path + ['v3', 'group', 'default', 'view', 'default']) + self.cli_set(base_path + ['v3', 'view', 'default', 'oid', '1']) + self.cli_set(base_path + ['v3', 'group', 'default', 'view', 'default']) # create user - self.session.set(base_path + ['v3', 'user', 'vyos', 'auth', 'plaintext-password', 'vyos12345678']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'auth', 'type', 'sha']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'privacy', 'plaintext-password', 'vyos12345678']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'privacy', 'type', 'aes']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'group', 'default']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'auth', 'plaintext-password', 'vyos12345678']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'auth', 'type', 'sha']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'privacy', 'plaintext-password', 'vyos12345678']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'privacy', 'type', 'aes']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'group', 'default']) - self.session.commit() + self.cli_commit() # commit will alter the CLI values - check if they have been updated: hashed_password = '4e52fe55fd011c9c51ae2c65f4b78ca93dcafdfe' - tmp = self.session.show_config(base_path + ['v3', 'user', 'vyos', 'auth', 'encrypted-password']).split()[1] + tmp = self._session.show_config(base_path + ['v3', 'user', 'vyos', 'auth', 'encrypted-password']).split()[1] self.assertEqual(tmp, hashed_password) - tmp = self.session.show_config(base_path + ['v3', 'user', 'vyos', 'privacy', 'encrypted-password']).split()[1] + tmp = self._session.show_config(base_path + ['v3', 'user', 'vyos', 'privacy', 'encrypted-password']).split()[1] self.assertEqual(tmp, hashed_password) # TODO: read in config file and check values @@ -123,30 +119,30 @@ class TestSNMPService(unittest.TestCase): # Check if SNMPv3 can be configured with MD5 authentication # and service runs - self.session.set(base_path + ['v3', 'engineid', '000000000000000000000002']) - self.session.set(base_path + ['v3', 'group', 'default', 'mode', 'ro']) + self.cli_set(base_path + ['v3', 'engineid', '000000000000000000000002']) + self.cli_set(base_path + ['v3', 'group', 'default', 'mode', 'ro']) # check validate() - a view must be created before this can be comitted with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() - self.session.set(base_path + ['v3', 'view', 'default', 'oid', '1']) - self.session.set(base_path + ['v3', 'group', 'default', 'view', 'default']) + self.cli_set(base_path + ['v3', 'view', 'default', 'oid', '1']) + self.cli_set(base_path + ['v3', 'group', 'default', 'view', 'default']) # create user - self.session.set(base_path + ['v3', 'user', 'vyos', 'auth', 'plaintext-password', 'vyos12345678']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'auth', 'type', 'md5']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'privacy', 'plaintext-password', 'vyos12345678']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'privacy', 'type', 'des']) - self.session.set(base_path + ['v3', 'user', 'vyos', 'group', 'default']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'auth', 'plaintext-password', 'vyos12345678']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'auth', 'type', 'md5']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'privacy', 'plaintext-password', 'vyos12345678']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'privacy', 'type', 'des']) + self.cli_set(base_path + ['v3', 'user', 'vyos', 'group', 'default']) - self.session.commit() + self.cli_commit() # commit will alter the CLI values - check if they have been updated: hashed_password = '4c67690d45d3dfcd33d0d7e308e370ad' - tmp = self.session.show_config(base_path + ['v3', 'user', 'vyos', 'auth', 'encrypted-password']).split()[1] + tmp = self._session.show_config(base_path + ['v3', 'user', 'vyos', 'auth', 'encrypted-password']).split()[1] self.assertEqual(tmp, hashed_password) - tmp = self.session.show_config(base_path + ['v3', 'user', 'vyos', 'privacy', 'encrypted-password']).split()[1] + tmp = self._session.show_config(base_path + ['v3', 'user', 'vyos', 'privacy', 'encrypted-password']).split()[1] self.assertEqual(tmp, hashed_password) # TODO: read in config file and check values diff --git a/smoketest/scripts/cli/test_service_ssh.py b/smoketest/scripts/cli/test_service_ssh.py index 68081e56f..c76f709b1 100755 --- a/smoketest/scripts/cli/test_service_ssh.py +++ b/smoketest/scripts/cli/test_service_ssh.py @@ -14,10 +14,12 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import re import os +import re import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.util import cmd @@ -38,18 +40,16 @@ def get_config_value(key): tmp = re.findall(f'\n?{key}\s+(.*)', tmp) return tmp -class TestServiceSSH(unittest.TestCase): +class TestServiceSSH(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) # ensure we can also run this test on a live system - so lets clean # out the current configuration :) - self.session.delete(base_path) + self.cli_delete(base_path) def tearDown(self): # delete testing SSH config - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() self.assertTrue(os.path.isfile(key_rsa)) self.assertTrue(os.path.isfile(key_dsa)) @@ -58,10 +58,10 @@ class TestServiceSSH(unittest.TestCase): def test_ssh_default(self): # Check if SSH service runs with default settings - used for checking # behavior of <defaultValue> in XML definition - self.session.set(base_path) + self.cli_set(base_path) # commit changes - self.session.commit() + self.cli_commit() # Check configured port port = get_config_value('Port')[0] @@ -72,15 +72,15 @@ class TestServiceSSH(unittest.TestCase): def test_ssh_single_listen_address(self): # Check if SSH service can be configured and runs - self.session.set(base_path + ['port', '1234']) - self.session.set(base_path + ['disable-host-validation']) - self.session.set(base_path + ['disable-password-authentication']) - self.session.set(base_path + ['loglevel', 'verbose']) - self.session.set(base_path + ['client-keepalive-interval', '100']) - self.session.set(base_path + ['listen-address', '127.0.0.1']) + self.cli_set(base_path + ['port', '1234']) + self.cli_set(base_path + ['disable-host-validation']) + self.cli_set(base_path + ['disable-password-authentication']) + self.cli_set(base_path + ['loglevel', 'verbose']) + self.cli_set(base_path + ['client-keepalive-interval', '100']) + self.cli_set(base_path + ['listen-address', '127.0.0.1']) # commit changes - self.session.commit() + self.cli_commit() # Check configured port port = get_config_value('Port')[0] @@ -114,14 +114,14 @@ class TestServiceSSH(unittest.TestCase): # listen ports and listen-addresses ports = ['22', '2222', '2223', '2224'] for port in ports: - self.session.set(base_path + ['port', port]) + self.cli_set(base_path + ['port', port]) addresses = ['127.0.0.1', '::1'] for address in addresses: - self.session.set(base_path + ['listen-address', address]) + self.cli_set(base_path + ['listen-address', address]) # commit changes - self.session.commit() + self.cli_commit() # Check configured port tmp = get_config_value('Port') @@ -139,17 +139,17 @@ class TestServiceSSH(unittest.TestCase): def test_ssh_vrf(self): # Check if SSH service can be bound to given VRF port = '22' - self.session.set(base_path + ['port', port]) - self.session.set(base_path + ['vrf', vrf]) + self.cli_set(base_path + ['port', port]) + self.cli_set(base_path + ['vrf', vrf]) # VRF does yet not exist - an error must be thrown with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() - self.session.set(['vrf', 'name', vrf, 'table', '1338']) + self.cli_set(['vrf', 'name', vrf, 'table', '1338']) # commit changes - self.session.commit() + self.cli_commit() # Check configured port tmp = get_config_value('Port') @@ -163,7 +163,7 @@ class TestServiceSSH(unittest.TestCase): self.assertIn(PROCESS_NAME, tmp) # delete VRF - self.session.delete(['vrf', 'name', vrf]) + self.cli_delete(['vrf', 'name', vrf]) if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_service_tftp-server.py b/smoketest/scripts/cli/test_service_tftp-server.py index 82e5811ff..aed4c6beb 100755 --- a/smoketest/scripts/cli/test_service_tftp-server.py +++ b/smoketest/scripts/cli/test_service_tftp-server.py @@ -14,11 +14,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import re -import os import unittest from psutil import process_iter +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError @@ -32,28 +31,26 @@ dummy_if_path = ['interfaces', 'dummy', 'dum69'] address_ipv4 = '192.0.2.1' address_ipv6 = '2001:db8::1' -class TestServiceTFTPD(unittest.TestCase): +class TestServiceTFTPD(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(dummy_if_path + ['address', address_ipv4 + '/32']) - self.session.set(dummy_if_path + ['address', address_ipv6 + '/128']) + self.cli_set(dummy_if_path + ['address', address_ipv4 + '/32']) + self.cli_set(dummy_if_path + ['address', address_ipv6 + '/128']) def tearDown(self): - self.session.delete(base_path) - self.session.delete(dummy_if_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_delete(dummy_if_path) + self.cli_commit() def test_01_tftpd_single(self): directory = '/tmp' port = '69' # default port - self.session.set(base_path + ['allow-upload']) - self.session.set(base_path + ['directory', directory]) - self.session.set(base_path + ['listen-address', address_ipv4]) + self.cli_set(base_path + ['allow-upload']) + self.cli_set(base_path + ['directory', directory]) + self.cli_set(base_path + ['listen-address', address_ipv4]) # commit changes - self.session.commit() + self.cli_commit() config = read_file('/etc/default/tftpd0') # verify listen IP address @@ -71,13 +68,13 @@ class TestServiceTFTPD(unittest.TestCase): address = [address_ipv4, address_ipv6] port = '70' - self.session.set(base_path + ['directory', directory]) + self.cli_set(base_path + ['directory', directory]) for addr in address: - self.session.set(base_path + ['listen-address', addr]) - self.session.set(base_path + ['port', port]) + self.cli_set(base_path + ['listen-address', addr]) + self.cli_set(base_path + ['port', port]) # commit changes - self.session.commit() + self.cli_commit() for idx in range(0, len(address)): config = read_file(f'/etc/default/tftpd{idx}') diff --git a/smoketest/scripts/cli/test_service_webproxy.py b/smoketest/scripts/cli/test_service_webproxy.py index 3db2daa8f..d47bd452d 100755 --- a/smoketest/scripts/cli/test_service_webproxy.py +++ b/smoketest/scripts/cli/test_service_webproxy.py @@ -14,9 +14,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.util import cmd @@ -29,23 +30,21 @@ base_path = ['service', 'webproxy'] listen_if = 'dum3632' listen_ip = '192.0.2.1' -class TestServiceWebProxy(unittest.TestCase): +class TestServiceWebProxy(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) - self.session.set(['interfaces', 'dummy', listen_if, 'address', listen_ip + '/32']) + self.cli_set(['interfaces', 'dummy', listen_if, 'address', listen_ip + '/32']) def tearDown(self): - self.session.delete(['interfaces', 'dummy', listen_if]) - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(['interfaces', 'dummy', listen_if]) + self.cli_delete(base_path) + self.cli_commit() def test_01_basic_proxy(self): default_cache = '100' - self.session.set(base_path + ['listen-address', listen_ip]) + self.cli_set(base_path + ['listen-address', listen_ip]) # commit changes - self.session.commit() + self.cli_commit() config = read_file(PROXY_CONF) self.assertIn(f'http_port {listen_ip}:3128 intercept', config) @@ -84,24 +83,24 @@ class TestServiceWebProxy(unittest.TestCase): block_mine = ['application/pdf', 'application/x-sh'] body_max_size = '4096' - self.session.set(base_path + ['listen-address', listen_ip]) - self.session.set(base_path + ['append-domain', domain]) - self.session.set(base_path + ['default-port', port]) - self.session.set(base_path + ['cache-size', cache_size]) - self.session.set(base_path + ['disable-access-log']) + self.cli_set(base_path + ['listen-address', listen_ip]) + self.cli_set(base_path + ['append-domain', domain]) + self.cli_set(base_path + ['default-port', port]) + self.cli_set(base_path + ['cache-size', cache_size]) + self.cli_set(base_path + ['disable-access-log']) - self.session.set(base_path + ['minimum-object-size', min_obj_size]) - self.session.set(base_path + ['maximum-object-size', max_obj_size]) + self.cli_set(base_path + ['minimum-object-size', min_obj_size]) + self.cli_set(base_path + ['maximum-object-size', max_obj_size]) - self.session.set(base_path + ['outgoing-address', listen_ip]) + self.cli_set(base_path + ['outgoing-address', listen_ip]) for mime in block_mine: - self.session.set(base_path + ['reply-block-mime', mime]) + self.cli_set(base_path + ['reply-block-mime', mime]) - self.session.set(base_path + ['reply-body-max-size', body_max_size]) + self.cli_set(base_path + ['reply-body-max-size', body_max_size]) # commit changes - self.session.commit() + self.cli_commit() config = read_file(PROXY_CONF) self.assertIn(f'http_port {listen_ip}:{port} intercept', config) @@ -132,34 +131,34 @@ class TestServiceWebProxy(unittest.TestCase): ldap_attr = 'cn' ldap_filter = '(cn=%s)' - self.session.set(base_path + ['listen-address', listen_ip, 'disable-transparent']) - self.session.set(base_path + ['authentication', 'children', auth_children]) - self.session.set(base_path + ['authentication', 'credentials-ttl', cred_ttl]) + self.cli_set(base_path + ['listen-address', listen_ip, 'disable-transparent']) + self.cli_set(base_path + ['authentication', 'children', auth_children]) + self.cli_set(base_path + ['authentication', 'credentials-ttl', cred_ttl]) - self.session.set(base_path + ['authentication', 'realm', realm]) - self.session.set(base_path + ['authentication', 'method', 'ldap']) + self.cli_set(base_path + ['authentication', 'realm', realm]) + self.cli_set(base_path + ['authentication', 'method', 'ldap']) # check validate() - LDAP authentication is enabled, but server not set with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['authentication', 'ldap', 'server', ldap_server]) + self.cli_commit() + self.cli_set(base_path + ['authentication', 'ldap', 'server', ldap_server]) # check validate() - LDAP password can not be set when bind-dn is not define - self.session.set(base_path + ['authentication', 'ldap', 'password', ldap_password]) + self.cli_set(base_path + ['authentication', 'ldap', 'password', ldap_password]) with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['authentication', 'ldap', 'bind-dn', ldap_bind_dn]) + self.cli_commit() + self.cli_set(base_path + ['authentication', 'ldap', 'bind-dn', ldap_bind_dn]) # check validate() - LDAP base-dn must be set with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.set(base_path + ['authentication', 'ldap', 'base-dn', ldap_base_dn]) + self.cli_commit() + self.cli_set(base_path + ['authentication', 'ldap', 'base-dn', ldap_base_dn]) - self.session.set(base_path + ['authentication', 'ldap', 'username-attribute', ldap_attr]) - self.session.set(base_path + ['authentication', 'ldap', 'filter-expression', ldap_filter]) - self.session.set(base_path + ['authentication', 'ldap', 'use-ssl']) + self.cli_set(base_path + ['authentication', 'ldap', 'username-attribute', ldap_attr]) + self.cli_set(base_path + ['authentication', 'ldap', 'filter-expression', ldap_filter]) + self.cli_set(base_path + ['authentication', 'ldap', 'use-ssl']) # commit changes - self.session.commit() + self.cli_commit() config = read_file(PROXY_CONF) self.assertIn(f'http_port {listen_ip}:3128', config) # disable-transparent @@ -175,7 +174,7 @@ class TestServiceWebProxy(unittest.TestCase): self.assertTrue(process_named_running(PROCESS_NAME)) def test_04_cache_peer(self): - self.session.set(base_path + ['listen-address', listen_ip]) + self.cli_set(base_path + ['listen-address', listen_ip]) cache_peers = { 'foo' : '192.0.2.1', @@ -183,12 +182,12 @@ class TestServiceWebProxy(unittest.TestCase): 'baz' : '192.0.2.3', } for peer in cache_peers: - self.session.set(base_path + ['cache-peer', peer, 'address', cache_peers[peer]]) + self.cli_set(base_path + ['cache-peer', peer, 'address', cache_peers[peer]]) if peer == 'baz': - self.session.set(base_path + ['cache-peer', peer, 'type', 'sibling']) + self.cli_set(base_path + ['cache-peer', peer, 'type', 'sibling']) # commit changes - self.session.commit() + self.cli_commit() config = read_file(PROXY_CONF) self.assertIn('never_direct allow all', config) @@ -214,22 +213,22 @@ class TestServiceWebProxy(unittest.TestCase): local_ok = ['10.0.0.0', 'vyos.net'] local_ok_url = ['vyos.net', 'vyos.io'] - self.session.set(base_path + ['listen-address', listen_ip]) - self.session.set(base_path + ['url-filtering', 'squidguard', 'log', 'all']) + self.cli_set(base_path + ['listen-address', listen_ip]) + self.cli_set(base_path + ['url-filtering', 'squidguard', 'log', 'all']) for block in local_block: - self.session.set(base_path + ['url-filtering', 'squidguard', 'local-block', block]) + self.cli_set(base_path + ['url-filtering', 'squidguard', 'local-block', block]) for ok in local_ok: - self.session.set(base_path + ['url-filtering', 'squidguard', 'local-ok', ok]) + self.cli_set(base_path + ['url-filtering', 'squidguard', 'local-ok', ok]) for url in local_block_url: - self.session.set(base_path + ['url-filtering', 'squidguard', 'local-block-url', url]) + self.cli_set(base_path + ['url-filtering', 'squidguard', 'local-block-url', url]) for url in local_ok_url: - self.session.set(base_path + ['url-filtering', 'squidguard', 'local-ok-url', url]) + self.cli_set(base_path + ['url-filtering', 'squidguard', 'local-ok-url', url]) for pattern in local_block_pattern: - self.session.set(base_path + ['url-filtering', 'squidguard', 'local-block-keyword', pattern]) + self.cli_set(base_path + ['url-filtering', 'squidguard', 'local-block-keyword', pattern]) # commit changes - self.session.commit() + self.cli_commit() # Check regular Squid config config = read_file(PROXY_CONF) diff --git a/smoketest/scripts/cli/test_system_acceleration_qat.py b/smoketest/scripts/cli/test_system_acceleration_qat.py index cadb263f5..0a86f58b8 100755 --- a/smoketest/scripts/cli/test_system_acceleration_qat.py +++ b/smoketest/scripts/cli/test_system_acceleration_qat.py @@ -14,22 +14,19 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError base_path = ['system', 'acceleration', 'qat'] -class TestSystemLCD(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestIntelQAT(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_basic(self): """ Check if configuration script is in place and that the config @@ -37,11 +34,11 @@ class TestSystemLCD(unittest.TestCase): be extended with QAT autodetection once run on a QAT enabled device """ # configure some system display - self.session.set(base_path) + self.cli_set(base_path) # An error must be thrown if QAT device could not be found with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_system_ip.py b/smoketest/scripts/cli/test_system_ip.py index 4ad8d537d..e98a4e234 100755 --- a/smoketest/scripts/cli/test_system_ip.py +++ b/smoketest/scripts/cli/test_system_ip.py @@ -14,22 +14,18 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.util import read_file base_path = ['system', 'ip'] -class TestSystemIP(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestSystemIP(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_system_ip_forwarding(self): # Test if IPv4 forwarding can be disabled globally, default is '1' @@ -37,8 +33,8 @@ class TestSystemIP(unittest.TestCase): all_forwarding = '/proc/sys/net/ipv4/conf/all/forwarding' self.assertEqual(read_file(all_forwarding), '1') - self.session.set(base_path + ['disable-forwarding']) - self.session.commit() + self.cli_set(base_path + ['disable-forwarding']) + self.cli_commit() self.assertEqual(read_file(all_forwarding), '0') @@ -50,9 +46,9 @@ class TestSystemIP(unittest.TestCase): self.assertEqual(read_file(use_neigh), '0') self.assertEqual(read_file(hash_policy), '0') - self.session.set(base_path + ['multipath', 'ignore-unreachable-nexthops']) - self.session.set(base_path + ['multipath', 'layer4-hashing']) - self.session.commit() + self.cli_set(base_path + ['multipath', 'ignore-unreachable-nexthops']) + self.cli_set(base_path + ['multipath', 'layer4-hashing']) + self.cli_commit() self.assertEqual(read_file(use_neigh), '1') self.assertEqual(read_file(hash_policy), '1') @@ -69,8 +65,8 @@ class TestSystemIP(unittest.TestCase): self.assertEqual(read_file(gc_thresh1), '1024') for size in [1024, 2048, 4096, 8192, 16384, 32768]: - self.session.set(base_path + ['arp', 'table-size', str(size)]) - self.session.commit() + self.cli_set(base_path + ['arp', 'table-size', str(size)]) + self.cli_commit() self.assertEqual(read_file(gc_thresh3), str(size)) self.assertEqual(read_file(gc_thresh2), str(size // 2)) diff --git a/smoketest/scripts/cli/test_system_ipv6.py b/smoketest/scripts/cli/test_system_ipv6.py index df69739eb..c9c9e833d 100755 --- a/smoketest/scripts/cli/test_system_ipv6.py +++ b/smoketest/scripts/cli/test_system_ipv6.py @@ -14,9 +14,9 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.util import read_file @@ -27,30 +27,26 @@ file_disable = '/etc/modprobe.d/vyos_disable_ipv6.conf' file_dad = '/proc/sys/net/ipv6/conf/all/accept_dad' file_multipath = '/proc/sys/net/ipv6/fib_multipath_hash_policy' -class TestSystemIPv6(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestSystemIPv6(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_system_ipv6_forwarding(self): # Test if IPv6 forwarding can be disabled globally, default is '1' # which means forwearding enabled self.assertEqual(read_file(file_forwarding), '1') - self.session.set(base_path + ['disable-forwarding']) - self.session.commit() + self.cli_set(base_path + ['disable-forwarding']) + self.cli_commit() self.assertEqual(read_file(file_forwarding), '0') def test_system_ipv6_disable(self): # Do not assign any IPv6 address on interfaces, this requires a reboot # which can not be tested, but we can read the config file :) - self.session.set(base_path + ['disable']) - self.session.commit() + self.cli_set(base_path + ['disable']) + self.cli_commit() # Verify configuration file self.assertEqual(read_file(file_disable), 'options ipv6 disable_ipv6=1') @@ -61,8 +57,8 @@ class TestSystemIPv6(unittest.TestCase): # Do not assign any IPv6 address on interfaces, this requires a reboot # which can not be tested, but we can read the config file :) - self.session.set(base_path + ['strict-dad']) - self.session.commit() + self.cli_set(base_path + ['strict-dad']) + self.cli_commit() # Verify configuration file self.assertEqual(read_file(file_dad), '2') @@ -73,8 +69,8 @@ class TestSystemIPv6(unittest.TestCase): # Do not assign any IPv6 address on interfaces, this requires a reboot # which can not be tested, but we can read the config file :) - self.session.set(base_path + ['multipath', 'layer4-hashing']) - self.session.commit() + self.cli_set(base_path + ['multipath', 'layer4-hashing']) + self.cli_commit() # Verify configuration file self.assertEqual(read_file(file_multipath), '1') @@ -91,8 +87,8 @@ class TestSystemIPv6(unittest.TestCase): self.assertEqual(read_file(gc_thresh1), '1024') for size in [1024, 2048, 4096, 8192, 16384, 32768]: - self.session.set(base_path + ['neighbor', 'table-size', str(size)]) - self.session.commit() + self.cli_set(base_path + ['neighbor', 'table-size', str(size)]) + self.cli_commit() self.assertEqual(read_file(gc_thresh3), str(size)) self.assertEqual(read_file(gc_thresh2), str(size // 2)) diff --git a/smoketest/scripts/cli/test_system_lcd.py b/smoketest/scripts/cli/test_system_lcd.py index 2bf601e3b..7a39e2986 100755 --- a/smoketest/scripts/cli/test_system_lcd.py +++ b/smoketest/scripts/cli/test_system_lcd.py @@ -14,32 +14,29 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM from configparser import ConfigParser + from vyos.configsession import ConfigSession from vyos.util import process_named_running config_file = '/run/LCDd/LCDd.conf' base_path = ['system', 'lcd'] -class TestSystemLCD(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestSystemLCD(VyOSUnitTestSHIM.TestCase): def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_system_display(self): # configure some system display - self.session.set(base_path + ['device', 'ttyS1']) - self.session.set(base_path + ['model', 'cfa-533']) + self.cli_set(base_path + ['device', 'ttyS1']) + self.cli_set(base_path + ['model', 'cfa-533']) # commit changes - self.session.commit() + self.cli_commit() # load up ini-styled LCDd.conf conf = ConfigParser() diff --git a/smoketest/scripts/cli/test_system_login.py b/smoketest/scripts/cli/test_system_login.py index bb6f57fc2..aa97511e0 100755 --- a/smoketest/scripts/cli/test_system_login.py +++ b/smoketest/scripts/cli/test_system_login.py @@ -14,11 +14,12 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import re import platform import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from distutils.version import LooseVersion from platform import release as kernel_version from subprocess import Popen, PIPE @@ -32,31 +33,27 @@ from vyos.template import inc_ip base_path = ['system', 'login'] users = ['vyos1', 'vyos2'] -class TestSystemLogin(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestSystemLogin(VyOSUnitTestSHIM.TestCase): def tearDown(self): # Delete individual users from configuration for user in users: - self.session.delete(base_path + ['user', user]) + self.cli_delete(base_path + ['user', user]) - self.session.commit() - del self.session + self.cli_commit() def test_system_login_user(self): # Check if user can be created and we can SSH to localhost - self.session.set(['service', 'ssh', 'port', '22']) + self.cli_set(['service', 'ssh', 'port', '22']) for user in users: name = "VyOS Roxx " + user home_dir = "/tmp/" + user - self.session.set(base_path + ['user', user, 'authentication', 'plaintext-password', user]) - self.session.set(base_path + ['user', user, 'full-name', 'VyOS Roxx']) - self.session.set(base_path + ['user', user, 'home-directory', home_dir]) + self.cli_set(base_path + ['user', user, 'authentication', 'plaintext-password', user]) + self.cli_set(base_path + ['user', user, 'full-name', 'VyOS Roxx']) + self.cli_set(base_path + ['user', user, 'home-directory', home_dir]) - self.session.commit() + self.cli_commit() for user in users: cmd = ['su','-', user] @@ -93,18 +90,18 @@ class TestSystemLogin(unittest.TestCase): radius_port = '2000' radius_timeout = '1' - self.session.set(base_path + ['radius', 'server', radius_server, 'key', radius_key]) - self.session.set(base_path + ['radius', 'server', radius_server, 'port', radius_port]) - self.session.set(base_path + ['radius', 'server', radius_server, 'timeout', radius_timeout]) - self.session.set(base_path + ['radius', 'source-address', radius_source]) - self.session.set(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) + self.cli_set(base_path + ['radius', 'server', radius_server, 'key', radius_key]) + self.cli_set(base_path + ['radius', 'server', radius_server, 'port', radius_port]) + self.cli_set(base_path + ['radius', 'server', radius_server, 'timeout', radius_timeout]) + self.cli_set(base_path + ['radius', 'source-address', radius_source]) + self.cli_set(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) # check validate() - Only one IPv4 source-address supported with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) + self.cli_commit() + self.cli_delete(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) - self.session.commit() + self.cli_commit() # this file must be read with higher permissions pam_radius_auth_conf = cmd('sudo cat /etc/pam_radius_auth.conf') @@ -147,18 +144,18 @@ class TestSystemLogin(unittest.TestCase): radius_port = '4000' radius_timeout = '4' - self.session.set(base_path + ['radius', 'server', radius_server, 'key', radius_key]) - self.session.set(base_path + ['radius', 'server', radius_server, 'port', radius_port]) - self.session.set(base_path + ['radius', 'server', radius_server, 'timeout', radius_timeout]) - self.session.set(base_path + ['radius', 'source-address', radius_source]) - self.session.set(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) + self.cli_set(base_path + ['radius', 'server', radius_server, 'key', radius_key]) + self.cli_set(base_path + ['radius', 'server', radius_server, 'port', radius_port]) + self.cli_set(base_path + ['radius', 'server', radius_server, 'timeout', radius_timeout]) + self.cli_set(base_path + ['radius', 'source-address', radius_source]) + self.cli_set(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) # check validate() - Only one IPv4 source-address supported with self.assertRaises(ConfigSessionError): - self.session.commit() - self.session.delete(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) + self.cli_commit() + self.cli_delete(base_path + ['radius', 'source-address', inc_ip(radius_source, 1)]) - self.session.commit() + self.cli_commit() # this file must be read with higher permissions pam_radius_auth_conf = cmd('sudo cat /etc/pam_radius_auth.conf') diff --git a/smoketest/scripts/cli/test_system_nameserver.py b/smoketest/scripts/cli/test_system_nameserver.py index 5610c90c7..50dc466c2 100755 --- a/smoketest/scripts/cli/test_system_nameserver.py +++ b/smoketest/scripts/cli/test_system_nameserver.py @@ -14,12 +14,15 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import re import unittest -from vyos.configsession import ConfigSession, ConfigSessionError -import vyos.util as util +from base_vyostest_shim import VyOSUnitTestSHIM + +from vyos.configsession import ConfigSession +from vyos.configsession import ConfigSessionError + +from vyos.util import read_file RESOLV_CONF = '/etc/resolv.conf' @@ -27,25 +30,20 @@ test_servers = ['192.0.2.10', '2001:db8:1::100'] base_path = ['system', 'name-server'] def get_name_servers(): - resolv_conf = util.read_file(RESOLV_CONF) + resolv_conf = read_file(RESOLV_CONF) return re.findall(r'\n?nameserver\s+(.*)', resolv_conf) -class TestSystemNameServer(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestSystemNameServer(VyOSUnitTestSHIM.TestCase): def tearDown(self): # Delete existing name servers - self.session.delete(base_path) - self.session.commit() - - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_nameserver_add(self): # Check if server is added to resolv.conf for s in test_servers: - self.session.set(base_path + [s]) - self.session.commit() + self.cli_set(base_path + [s]) + self.cli_commit() servers = get_name_servers() for s in servers: @@ -54,8 +52,8 @@ class TestSystemNameServer(unittest.TestCase): def test_nameserver_delete(self): # Test if a deleted server disappears from resolv.conf for s in test_servers: - self.session.delete(base_path + [s]) - self.session.commit() + self.cli_delete(base_path + [s]) + self.cli_commit() servers = get_name_servers() for s in servers: diff --git a/smoketest/scripts/cli/test_system_ntp.py b/smoketest/scripts/cli/test_system_ntp.py index edb6ad94d..2b86ebd7c 100755 --- a/smoketest/scripts/cli/test_system_ntp.py +++ b/smoketest/scripts/cli/test_system_ntp.py @@ -15,9 +15,10 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. import re -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError from vyos.template import address_from_cidr @@ -35,17 +36,15 @@ def get_config_value(key): # remove possible trailing whitespaces return [item.strip() for item in tmp] -class TestSystemNTP(unittest.TestCase): +class TestSystemNTP(VyOSUnitTestSHIM.TestCase): def setUp(self): - self.session = ConfigSession(os.getpid()) # ensure we can also run this test on a live system - so lets clean # out the current configuration :) - self.session.delete(base_path) + self.cli_delete(base_path) def tearDown(self): - self.session.delete(base_path) - self.session.commit() - del self.session + self.cli_delete(base_path) + self.cli_commit() self.assertFalse(process_named_running(PROCESS_NAME)) @@ -57,13 +56,13 @@ class TestSystemNTP(unittest.TestCase): for server in servers: for option in options: - self.session.set(base_path + ['server', server, option]) + self.cli_set(base_path + ['server', server, option]) # Test NTP pool - self.session.set(base_path + ['server', ntp_pool, 'pool']) + self.cli_set(base_path + ['server', ntp_pool, 'pool']) # commit changes - self.session.commit() + self.cli_commit() # Check generated configuration tmp = get_config_value('server') @@ -81,21 +80,21 @@ class TestSystemNTP(unittest.TestCase): # Test the allowed-networks statement listen_address = ['127.0.0.1', '::1'] for listen in listen_address: - self.session.set(base_path + ['listen-address', listen]) + self.cli_set(base_path + ['listen-address', listen]) networks = ['192.0.2.0/24', '2001:db8:1000::/64'] for network in networks: - self.session.set(base_path + ['allow-clients', 'address', network]) + self.cli_set(base_path + ['allow-clients', 'address', network]) # Verify "NTP server not configured" verify() statement with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() servers = ['192.0.2.1', '192.0.2.2'] for server in servers: - self.session.set(base_path + ['server', server]) + self.cli_set(base_path + ['server', server]) - self.session.commit() + self.cli_commit() # Check generated client address configuration for network in networks: diff --git a/smoketest/scripts/cli/test_vpn_openconnect.py b/smoketest/scripts/cli/test_vpn_openconnect.py index e27216e09..bf528c8b7 100755 --- a/smoketest/scripts/cli/test_vpn_openconnect.py +++ b/smoketest/scripts/cli/test_vpn_openconnect.py @@ -14,9 +14,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -import os import unittest +from base_vyostest_shim import VyOSUnitTestSHIM + from vyos.configsession import ConfigSession from vyos.util import process_named_running @@ -25,29 +26,24 @@ base_path = ['vpn', 'openconnect'] cert = '/etc/ssl/certs/ssl-cert-snakeoil.pem' cert_key = '/etc/ssl/private/ssl-cert-snakeoil.key' -class TestVpnOpenconnect(unittest.TestCase): - def setUp(self): - self.session = ConfigSession(os.getpid()) - +class TestVpnOpenconnect(VyOSUnitTestSHIM.TestCase): def tearDown(self): # Delete vpn openconnect configuration - self.session.delete(base_path) - self.session.commit() - - del self.session + self.cli_delete(base_path) + self.cli_commit() def test_vpn(self): user = 'vyos_user' password = 'vyos_pass' - self.session.delete(base_path) - self.session.set(base_path + ["authentication", "local-users", "username", user, "password", password]) - self.session.set(base_path + ["authentication", "mode", "local"]) - self.session.set(base_path + ["network-settings", "client-ip-settings", "subnet", "192.0.2.0/24"]) - self.session.set(base_path + ["ssl", "ca-cert-file", cert]) - self.session.set(base_path + ["ssl", "cert-file", cert]) - self.session.set(base_path + ["ssl", "key-file", cert_key]) - - self.session.commit() + self.cli_delete(base_path) + self.cli_set(base_path + ["authentication", "local-users", "username", user, "password", password]) + self.cli_set(base_path + ["authentication", "mode", "local"]) + self.cli_set(base_path + ["network-settings", "client-ip-settings", "subnet", "192.0.2.0/24"]) + self.cli_set(base_path + ["ssl", "ca-cert-file", cert]) + self.cli_set(base_path + ["ssl", "cert-file", cert]) + self.cli_set(base_path + ["ssl", "key-file", cert_key]) + + self.cli_commit() # Check for running process self.assertTrue(process_named_running('ocserv-main')) diff --git a/smoketest/scripts/cli/test_vpn_sstp.py b/smoketest/scripts/cli/test_vpn_sstp.py index 95fe38dd9..033338685 100755 --- a/smoketest/scripts/cli/test_vpn_sstp.py +++ b/smoketest/scripts/cli/test_vpn_sstp.py @@ -23,18 +23,14 @@ ca_cert = '/tmp/ca.crt' ssl_cert = '/tmp/server.crt' ssl_key = '/tmp/server.key' -class TestVPNSSTPServer(BasicAccelPPPTest.BaseTest): +class TestVPNSSTPServer(BasicAccelPPPTest.TestCase): def setUp(self): self._base_path = ['vpn', 'sstp'] self._process_name = 'accel-pppd' self._config_file = '/run/accel-pppd/sstp.conf' self._chap_secrets = '/run/accel-pppd/sstp.chap-secrets' - super().setUp() - def tearDown(self): - super().tearDown() - def basic_config(self): # SSL is mandatory self.set(['ssl', 'ca-cert-file', ca_cert]) diff --git a/smoketest/scripts/cli/test_vrf.py b/smoketest/scripts/cli/test_vrf.py index 8e977d407..591630c46 100755 --- a/smoketest/scripts/cli/test_vrf.py +++ b/smoketest/scripts/cli/test_vrf.py @@ -20,6 +20,7 @@ import json import unittest from netifaces import interfaces +from base_vyostest_shim import VyOSUnitTestSHIM from vyos.configsession import ConfigSession from vyos.configsession import ConfigSessionError @@ -33,13 +34,7 @@ from vyos.validate import is_intf_addr_assigned base_path = ['vrf'] vrfs = ['red', 'green', 'blue', 'foo-bar', 'baz_foo'] -def get_vrf_ipv4_routes(vrf): - return json.loads(cmd(f'ip -4 -j route show vrf {vrf}')) - -def get_vrf_ipv6_routes(vrf): - return json.loads(cmd(f'ip -6 -j route show vrf {vrf}')) - -class VRFTest(unittest.TestCase): +class VRFTest(VyOSUnitTestSHIM.TestCase): _interfaces = [] @classmethod @@ -53,14 +48,13 @@ class VRFTest(unittest.TestCase): for tmp in Section.interfaces('ethernet'): if not '.' in tmp: cls._interfaces.append(tmp) - - def setUp(self): - self.session = ConfigSession(os.getpid()) + # call base-classes classmethod + super(cls, cls).setUpClass() def tearDown(self): # delete all VRFs - self.session.delete(base_path) - self.session.commit() + self.cli_delete(base_path) + self.cli_commit() for vrf in vrfs: self.assertNotIn(vrf, interfaces()) @@ -69,20 +63,20 @@ class VRFTest(unittest.TestCase): for vrf in vrfs: base = base_path + ['name', vrf] description = f'VyOS-VRF-{vrf}' - self.session.set(base + ['description', description]) + self.cli_set(base + ['description', description]) # check validate() - a table ID is mandatory with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() - self.session.set(base + ['table', table]) + self.cli_set(base + ['table', table]) if vrf == 'green': - self.session.set(base + ['disable']) + self.cli_set(base + ['disable']) table = str(int(table) + 1) # commit changes - self.session.commit() + self.cli_commit() # Verify VRF configuration table = '1000' @@ -113,11 +107,11 @@ class VRFTest(unittest.TestCase): table = '2000' for vrf in vrfs: base = base_path + ['name', vrf] - self.session.set(base + ['table', str(table)]) + self.cli_set(base + ['table', str(table)]) table = str(int(table) + 1) # commit changes - self.session.commit() + self.cli_commit() # Verify VRF configuration for vrf in vrfs: @@ -131,31 +125,31 @@ class VRFTest(unittest.TestCase): table = '1000' vrf = vrfs[0] base = base_path + ['name', vrf] - self.session.set(base + ['table', table]) + self.cli_set(base + ['table', table]) # commit changes - self.session.commit() + self.cli_commit() # Check if VRF has been created self.assertTrue(vrf in interfaces()) table = str(int(table) + 1) - self.session.set(base + ['table', table]) + self.cli_set(base + ['table', table]) # check validate() - table ID can not be altered! with self.assertRaises(ConfigSessionError): - self.session.commit() + self.cli_commit() def test_vrf_assign_interface(self): vrf = vrfs[0] table = '5000' - self.session.set(['vrf', 'name', vrf, 'table', table]) + self.cli_set(['vrf', 'name', vrf, 'table', table]) for interface in self._interfaces: section = Section.section(interface) - self.session.set(['interfaces', section, interface, 'vrf', vrf]) + self.cli_set(['interfaces', section, interface, 'vrf', vrf]) # commit changes - self.session.commit() + self.cli_commit() # Verify & cleanup for interface in self._interfaces: @@ -164,7 +158,7 @@ class VRFTest(unittest.TestCase): self.assertEqual(tmp, vrf) # cleanup section = Section.section(interface) - self.session.delete(['interfaces', section, interface, 'vrf']) + self.cli_delete(['interfaces', section, interface, 'vrf']) if __name__ == '__main__': unittest.main(verbosity=2) |