diff options
Diffstat (limited to 'src/conf_mode')
| -rwxr-xr-x | src/conf_mode/interface-ethernet.py | 171 |
1 files changed, 89 insertions, 82 deletions
diff --git a/src/conf_mode/interface-ethernet.py b/src/conf_mode/interface-ethernet.py index 5bfe35767..3faaef96f 100755 --- a/src/conf_mode/interface-ethernet.py +++ b/src/conf_mode/interface-ethernet.py @@ -215,6 +215,9 @@ def get_config(): def verify(eth): + if eth['deleted']: + return None + if eth['speed'] == 'auto': if eth['duplex'] != 'auto': raise ConfigError('If speed is hardcoded, duplex must be hardcoded, too') @@ -242,89 +245,93 @@ def generate(eth): def apply(eth): e = EthernetIf(eth['intf']) - # update interface description used e.g. within SNMP - e.ifalias = eth['description'] - - # - # missing DHCP/DHCPv6 options go here - # - - # ignore link state changes - e.link_detect = eth['disable_link_detect'] - # disable ethernet flow control (pause frames) - e.set_flow_control(eth['flow_control']) - # configure ARP cache timeout in milliseconds - e.arp_cache_tmp = eth['ip_arp_cache_tmo'] - # Enable proxy-arp on this interface - e.proxy_arp = eth['ip_proxy_arp'] - # Enable private VLAN proxy ARP on this interface - e.proxy_arp_pvlan = eth['ip_proxy_arp_pvlan'] - - # Change interface MAC address - re-set to real hardware address (hw-id) - # if custom mac is removed - if eth['mac']: - e.mac = eth['mac'] - else: - e.mac = eth['hw_id'] - - # Maximum Transmission Unit (MTU) - e.mtu = eth['mtu'] - - # Set physical interface speed and duplex - e.set_speed_duplex(eth['speed'], eth['duplex']) - - # Configure interface address(es) - # - not longer required addresses get removed first - # - newly addresses will be added second - for addr in eth['address_remove']: - e.del_addr(addr) - for addr in eth['address']: - e.add_addr(addr) - - # Enable/Disable interface - if eth['disable']: - e.state = 'down' + if eth['deleted']: + # delete interface + e.remove() else: - e.state = 'up' - - # remove no longer required service VLAN interfaces (vif-s) - for vif_s in eth['vif_s_remove']: - e.del_vlan(vif_s) - - # create service VLAN interfaces (vif-s) - for vif_s in eth['vif_s']: - s_vlan = e.add_vlan(vif_s['id'], ethertype=vif_s['ethertype']) - apply_vlan_config(s_vlan, vif_s) - - # remove no longer required client VLAN interfaces (vif-c) - # on lower service VLAN interface - for vif_c in vif_s['vif_c_remove']: - s_vlan.del_vlan(vif_c) - - # create client VLAN interfaces (vif-c) - # on lower service VLAN interface - for vif_c in vif_s['vif_c']: - c_vlan = s_vlan.add_vlan(vif_c['id']) - apply_vlan_config(c_vlan, vif_c) - - # remove no longer required VLAN interfaces (vif) - for vif in eth['vif_remove']: - e.del_vlan(vif) - - # create VLAN interfaces (vif) - for vif in eth['vif']: - # QoS priority mapping can only be set during interface creation - # so we delete the interface first if required. - if vif['egress_qos_changed'] or vif['ingress_qos_changed']: - try: - # on system bootup the above condition is true but the interface - # does not exists, which throws an exception, but that's legal - e.del_vlan(vif['id']) - except: - pass - - vlan = e.add_vlan(vif['id'], ingress_qos=vif['ingress_qos'], egress_qos=vif['egress_qos']) - apply_vlan_config(vlan, vif) + # update interface description used e.g. within SNMP + e.ifalias = eth['description'] + + # + # missing DHCP/DHCPv6 options go here + # + + # ignore link state changes + e.link_detect = eth['disable_link_detect'] + # disable ethernet flow control (pause frames) + e.set_flow_control(eth['flow_control']) + # configure ARP cache timeout in milliseconds + e.arp_cache_tmp = eth['ip_arp_cache_tmo'] + # Enable proxy-arp on this interface + e.proxy_arp = eth['ip_proxy_arp'] + # Enable private VLAN proxy ARP on this interface + e.proxy_arp_pvlan = eth['ip_proxy_arp_pvlan'] + + # Change interface MAC address - re-set to real hardware address (hw-id) + # if custom mac is removed + if eth['mac']: + e.mac = eth['mac'] + else: + e.mac = eth['hw_id'] + + # Maximum Transmission Unit (MTU) + e.mtu = eth['mtu'] + + # Set physical interface speed and duplex + e.set_speed_duplex(eth['speed'], eth['duplex']) + + # Configure interface address(es) + # - not longer required addresses get removed first + # - newly addresses will be added second + for addr in eth['address_remove']: + e.del_addr(addr) + for addr in eth['address']: + e.add_addr(addr) + + # Enable/Disable interface + if eth['disable']: + e.state = 'down' + else: + e.state = 'up' + + # remove no longer required service VLAN interfaces (vif-s) + for vif_s in eth['vif_s_remove']: + e.del_vlan(vif_s) + + # create service VLAN interfaces (vif-s) + for vif_s in eth['vif_s']: + s_vlan = e.add_vlan(vif_s['id'], ethertype=vif_s['ethertype']) + apply_vlan_config(s_vlan, vif_s) + + # remove no longer required client VLAN interfaces (vif-c) + # on lower service VLAN interface + for vif_c in vif_s['vif_c_remove']: + s_vlan.del_vlan(vif_c) + + # create client VLAN interfaces (vif-c) + # on lower service VLAN interface + for vif_c in vif_s['vif_c']: + c_vlan = s_vlan.add_vlan(vif_c['id']) + apply_vlan_config(c_vlan, vif_c) + + # remove no longer required VLAN interfaces (vif) + for vif in eth['vif_remove']: + e.del_vlan(vif) + + # create VLAN interfaces (vif) + for vif in eth['vif']: + # QoS priority mapping can only be set during interface creation + # so we delete the interface first if required. + if vif['egress_qos_changed'] or vif['ingress_qos_changed']: + try: + # on system bootup the above condition is true but the interface + # does not exists, which throws an exception, but that's legal + e.del_vlan(vif['id']) + except: + pass + + vlan = e.add_vlan(vif['id'], ingress_qos=vif['ingress_qos'], egress_qos=vif['egress_qos']) + apply_vlan_config(vlan, vif) return None |