diff options
Diffstat (limited to 'src/conf_mode')
| -rwxr-xr-x | src/conf_mode/service-pppoe.py | 713 |
1 files changed, 383 insertions, 330 deletions
diff --git a/src/conf_mode/service-pppoe.py b/src/conf_mode/service-pppoe.py index 6aec9be98..b92b7ab17 100755 --- a/src/conf_mode/service-pppoe.py +++ b/src/conf_mode/service-pppoe.py @@ -32,15 +32,16 @@ pidfile = r'/var/run/accel_pppoe.pid' pppoe_cnf_dir = r'/etc/accel-ppp/pppoe' chap_secrets = pppoe_cnf_dir + '/chap-secrets' pppoe_conf = pppoe_cnf_dir + '/pppoe.config' -# accel-pppd -d -c /etc/accel-ppp/pppoe/pppoe.config -p /var/run/accel_pppoe.pid +# accel-pppd -d -c /etc/accel-ppp/pppoe/pppoe.config -p +# /var/run/accel_pppoe.pid -### config path creation +# config path creation if not os.path.exists(pppoe_cnf_dir): - os.makedirs(pppoe_cnf_dir) - sl.syslog(sl.LOG_NOTICE, pppoe_cnf_dir + " created") + os.makedirs(pppoe_cnf_dir) + sl.syslog(sl.LOG_NOTICE, pppoe_cnf_dir + " created") pppoe_config = ''' -### generated by accel_pppoe.py ### +### generated by accel_pppoe.py ### [modules] log_syslog pppoe @@ -182,7 +183,9 @@ vendor={{authentication['radiusopt']['shaper']['vendor']}} [ppp] verbose=1 check-ip=1 -single-session=replace +{% if not sesscrtl == 'disable' %} +single-session={{sesscrtl}} +{% endif -%} {% if ppp_options['ccp'] %} ccp=1 {% endif %} @@ -264,7 +267,7 @@ timeout={{limits['timeout']}} tcp=127.0.0.1:2001 ''' -### pppoe chap secrets +# pppoe chap secrets chap_secrets_conf = ''' # username server password acceptable local IP addresses shaper {% for user in authentication['local-users'] %} @@ -278,351 +281,401 @@ chap_secrets_conf = ''' {% endif %} {% endfor %} ''' -### +# # inline helper functions -### +# # depending on hw and threads, daemon needs a little to start # if it takes longer than 100 * 0.5 secs, exception is being raised -# not sure if that's the best way to check it, but it worked so far quite well -### +# not sure if that's the best way to check it, but it worked so far quite well +# + + def chk_con(): - cnt = 0 - s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) - while True: - try: - s.connect(("127.0.0.1", 2001)) - break - except ConnectionRefusedError: - time.sleep(0.5) - cnt +=1 - if cnt == 100: - raise("failed to start pppoe server") - break - -### chap_secrets file if auth mode local + cnt = 0 + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + while True: + try: + s.connect(("127.0.0.1", 2001)) + break + except ConnectionRefusedError: + time.sleep(0.5) + cnt += 1 + if cnt == 100: + raise("failed to start pppoe server") + break + +# chap_secrets file if auth mode local + + def write_chap_secrets(c): - tmpl = jinja2.Template(chap_secrets_conf, trim_blocks=True) - chap_secrets_txt = tmpl.render(c) - old_umask = os.umask(0o077) - open(chap_secrets,'w').write(chap_secrets_txt) - os.umask(old_umask) - sl.syslog(sl.LOG_NOTICE, chap_secrets + ' written') + tmpl = jinja2.Template(chap_secrets_conf, trim_blocks=True) + chap_secrets_txt = tmpl.render(c) + old_umask = os.umask(0o077) + open(chap_secrets, 'w').write(chap_secrets_txt) + os.umask(old_umask) + sl.syslog(sl.LOG_NOTICE, chap_secrets + ' written') + def accel_cmd(cmd=''): - if not cmd: - return None - try: - ret = subprocess.check_output(['/usr/bin/accel-cmd',cmd]).decode().strip() - return ret - except: - return 1 + if not cmd: + return None + try: + ret = subprocess.check_output( + ['/usr/bin/accel-cmd', cmd]).decode().strip() + return ret + except: + return 1 -#### check ig local-ip is in client pool subnet +# check ig local-ip is in client pool subnet -### +# # inline helper functions end -### +# def get_config(): - c = Config() - if not c.exists('service pppoe-server'): - return None - - config_data = { - 'concentrator' : 'vyos-ac', - 'authentication' : { - 'local-users' : { + c = Config() + if not c.exists('service pppoe-server'): + return None + + config_data = { + 'concentrator': 'vyos-ac', + 'authentication': { + 'local-users': { + }, + 'mode': 'local', + 'radiussrv': {}, + 'radiusopt': {} }, - 'mode' : 'local', - 'radiussrv' : {}, - 'radiusopt' : {} - }, - 'client_ip_pool' : '', - 'client_ip_subnets' : [], - 'client_ipv6_pool' : {}, - 'interface' : {}, - 'ppp_gw' : '', - 'svc_name' : '', - 'dns' : [], - 'dnsv6' : [], - 'wins' : [], - 'mtu' : '1492', - 'ppp_options' : {}, - 'limits' : {}, - 'snmp' : 'disable' - } - - c.set_level('service pppoe-server') - ### general options - if c.exists('access-concentrator'): - config_data['concentrator'] = c.return_value('access-concentrator') - if c.exists('service-name'): - config_data['svc_name'] = c.return_value('service-name') - if c.exists('interface'): - for intfc in c.list_nodes('interface'): - config_data['interface'][intfc] = {'vlans' : []} - if c.exists('interface ' + intfc + ' vlan-id'): - config_data['interface'][intfc]['vlans'] += c.return_values('interface ' + intfc + ' vlan-id') - if c.exists('interface ' + intfc + ' vlan-range'): - config_data['interface'][intfc]['vlans'] +=c.return_values('interface ' + intfc + ' vlan-range') - if c.exists('local-ip'): - config_data['ppp_gw'] = c.return_value('local-ip') - if c.exists('dns-servers'): - if c.return_value('dns-servers server-1'): - config_data['dns'].append(c.return_value('dns-servers server-1')) - if c.return_value('dns-servers server-2'): - config_data['dns'].append(c.return_value('dns-servers server-2')) - if c.exists('dnsv6-servers'): - if c.return_value('dnsv6-servers server-1'): - config_data['dnsv6'].append(c.return_value('dnsv6-servers server-1')) - if c.return_value('dnsv6-servers server-2'): - config_data['dnsv6'].append(c.return_value('dnsv6-servers server-2')) - if c.return_value('dnsv6-servers server-3'): - config_data['dnsv6'].append(c.return_value('dnsv6-servers server-3')) - if c.exists('wins-servers'): - if c.return_value('wins-servers server-1'): - config_data['wins'].append(c.return_value('wins-servers server-1')) - if c.return_value('wins-servers server-2'): - config_data['wins'].append(c.return_value('wins-servers server-2')) - if c.exists('client-ip-pool'): - if c.exists('client-ip-pool start'): - config_data['client_ip_pool'] = c.return_value('client-ip-pool start') - if c.exists('client-ip-pool stop'): - config_data['client_ip_pool'] += '-' + re.search('[0-9]+$', c.return_value('client-ip-pool stop')).group(0) - else: - raise ConfigError('client ip pool stop required') - if c.exists('client-ip-pool subnet'): - config_data['client_ip_subnets'] = c.return_values('client-ip-pool subnet') - if c.exists('client-ipv6-pool prefix'): - config_data['client_ipv6_pool']['prefix'] = c.return_values('client-ipv6-pool prefix') - if c.exists('client-ipv6-pool delegate-prefix'): - config_data['client_ipv6_pool']['delegate-prefix'] = c.return_values('client-ipv6-pool delegate-prefix') - if c.exists('limits'): - if c.exists('limits burst'): - config_data['limits']['burst'] = str(c.return_value('limits burst')) - if c.exists('limits timeout'): - config_data['limits']['timeout'] = str(c.return_value('limits timeout')) - if c.exists('limits connection-limit'): - config_data['limits']['conn-limit'] = str(c.return_value('limits connection-limit')) - if c.exists('snmp'): - config_data['snmp'] = 'enable' - if c.exists('snmp master-agent'): - config_data['snmp'] = 'enable-ma' - - #### authentication mode local - if not c.exists('authentication mode'): - raise ConfigError('pppoe-server authentication mode required') - - if c.exists('authentication mode local'): - if c.exists('authentication local-users username'): - for usr in c.list_nodes('authentication local-users username'): - config_data['authentication']['local-users'].update( - { - usr : { - 'passwd' : None, - 'state' : 'enabled', - 'ip' : '*', - 'upload' : None, - 'download' : None - } - } - ) - if c.exists('authentication local-users username ' + usr + ' password'): - config_data['authentication']['local-users'][usr]['passwd'] = c.return_value('authentication local-users username ' + usr + ' password') - if c.exists('authentication local-users username ' + usr + ' disable'): - config_data['authentication']['local-users'][usr]['state'] = 'disable' - if c.exists('authentication local-users username ' + usr + ' static-ip'): - config_data['authentication']['local-users'][usr]['ip'] = c.return_value('authentication local-users username ' + usr + ' static-ip') - if c.exists('authentication local-users username ' + usr + ' rate-limit download'): - config_data['authentication']['local-users'][usr]['download'] = c.return_value('authentication local-users username ' + usr + ' rate-limit download') - if c.exists('authentication local-users username ' + usr + ' rate-limit upload'): - config_data['authentication']['local-users'][usr]['upload'] = c.return_value('authentication local-users username ' + usr + ' rate-limit upload') - - ### authentication mode radius servers and settings - - if c.exists('authentication mode radius'): - config_data['authentication']['mode'] = 'radius' - rsrvs = c.list_nodes('authentication radius-server') - for rsrv in rsrvs: - if c.return_value('authentication radius-server ' + rsrv + ' fail-time') == None: - ftime = '0' - else: - ftime = str(c.return_value('authentication radius-server ' + rsrv + ' fail-time')) - if c.return_value('authentication radius-server ' + rsrv + ' req-limit') == None: - reql = '0' - else: - reql = str(c.return_value('authentication radius-server ' + rsrv + ' req-limit')) - config_data['authentication']['radiussrv'].update( - { - rsrv : { - 'secret' : c.return_value('authentication radius-server ' + rsrv + ' secret'), - 'fail-time' : ftime, - 'req-limit' : reql - } - } - ) - - #### advanced radius-setting - if c.exists('authentication radius-settings'): - if c.exists('authentication radius-settings acct-timeout'): - config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value('authentication radius-settings acct-timeout') - if c.exists('authentication radius-settings max-try'): - config_data['authentication']['radiusopt']['max-try'] = c.return_value('authentication radius-settings max-try') - if c.exists('authentication radius-settings timeout'): - config_data['authentication']['radiusopt']['timeout'] = c.return_value('authentication radius-settings timeout') - if c.exists('authentication radius-settings nas-identifier'): - config_data['authentication']['radiusopt']['nas-id'] = c.return_value('authentication radius-settings nas-identifier') - if c.exists('authentication radius-settings nas-ip-address'): - config_data['authentication']['radiusopt']['nas-ip'] = c.return_value('authentication radius-settings nas-ip-address') - if c.exists('authentication radius-settings dae-server'): - config_data['authentication']['radiusopt'].update( - { - 'dae-srv' : { - 'ip-addr' : c.return_value('authentication radius-settings dae-server ip-address'), - 'port' : c.return_value('authentication radius-settings dae-server port'), - 'secret' : str(c.return_value('authentication radius-settings dae-server secret')) - } - } - ) - #### filter-id is the internal accel default if attribute is empty - #### set here as default for visibility which may change in the future - if c.exists('authentication radius-settings rate-limit enable'): - if not c.exists('authentication radius-settings rate-limit attribute'): - config_data['authentication']['radiusopt']['shaper'] = { - 'attr' : 'Filter-Id' - } - else: - config_data['authentication']['radiusopt']['shaper'] = { - 'attr' : c.return_value('authentication radius-settings rate-limit attribute') - } - if c.exists('authentication radius-settings rate-limit vendor'): - config_data['authentication']['radiusopt']['shaper']['vendor'] = c.return_value('authentication radius-settings rate-limit vendor') - - if c.exists('mtu'): - config_data['mtu'] = c.return_value('mtu') - - ### ppp_options - ppp_options = {} - if c.exists('ppp-options'): - if c.exists('ppp-options ccp'): - ppp_options['ccp'] = c.return_value('ppp-options ccp') - if c.exists('ppp-options min-mtu'): - ppp_options['min-mtu'] = c.return_value('ppp-options min-mtu') - if c.exists('ppp-options mru'): - ppp_options['mru'] = c.return_value('ppp-options mru') - if c.exists('ppp-options mppe deny'): - ppp_options['mppe'] = 'deny' - if c.exists('ppp-options mppe require'): - ppp_options['mppe'] = 'requre' - if c.exists('ppp-options mppe prefer'): - ppp_options['mppe'] = 'prefer' - if c.exists('ppp-options lcp-echo-failure'): - ppp_options['lcp-echo-failure'] = c.return_value('ppp-options lcp-echo-failure') - if c.exists('ppp-options lcp-echo-interval'): - ppp_options['lcp-echo-interval'] = c.return_value('ppp-options lcp-echo-interval') - if c.exists('ppp-options ipv4'): - ppp_options['ipv4'] = c.return_value('ppp-options ipv4') - if c.exists('ppp-options ipv6'): - ppp_options['ipv6'] = c.return_value('ppp-options ipv6') - if c.exists('ppp-options ipv6-accept-peer-intf-id'): - ppp_options['ipv6-accept-peer-intf-id']= 1 - if c.exists('ppp-options ipv6-intf-id'): - ppp_options['ipv6-intf-id'] = c.return_value('ppp-options ipv6-intf-id') - if c.exists('ppp-options ipv6-peer-intf-id'): - ppp_options['ipv6-peer-intf-id'] = c.return_value('ppp-options ipv6-peer-intf-id') - if c.exists('ppp-options lcp-echo-timeout'): - ppp_options['lcp-echo-timeout'] = c.return_value('ppp-options lcp-echo-timeout') - - if len(ppp_options) !=0: - config_data['ppp_options'] = ppp_options - - return config_data + 'client_ip_pool': '', + 'client_ip_subnets': [], + 'client_ipv6_pool': {}, + 'interface': {}, + 'ppp_gw': '', + 'svc_name': '', + 'dns': [], + 'dnsv6': [], + 'wins': [], + 'mtu': '1492', + 'ppp_options': {}, + 'limits': {}, + 'snmp': 'disable', + 'sesscrtl': 'replace' + } + + c.set_level('service pppoe-server') + # general options + if c.exists('access-concentrator'): + config_data['concentrator'] = c.return_value('access-concentrator') + if c.exists('service-name'): + config_data['svc_name'] = c.return_value('service-name') + if c.exists('interface'): + for intfc in c.list_nodes('interface'): + config_data['interface'][intfc] = {'vlans': []} + if c.exists('interface ' + intfc + ' vlan-id'): + config_data['interface'][intfc]['vlans'] += c.return_values( + 'interface ' + intfc + ' vlan-id') + if c.exists('interface ' + intfc + ' vlan-range'): + config_data['interface'][intfc]['vlans'] += c.return_values( + 'interface ' + intfc + ' vlan-range') + if c.exists('local-ip'): + config_data['ppp_gw'] = c.return_value('local-ip') + if c.exists('dns-servers'): + if c.return_value('dns-servers server-1'): + config_data['dns'].append(c.return_value('dns-servers server-1')) + if c.return_value('dns-servers server-2'): + config_data['dns'].append(c.return_value('dns-servers server-2')) + if c.exists('dnsv6-servers'): + if c.return_value('dnsv6-servers server-1'): + config_data['dnsv6'].append( + c.return_value('dnsv6-servers server-1')) + if c.return_value('dnsv6-servers server-2'): + config_data['dnsv6'].append( + c.return_value('dnsv6-servers server-2')) + if c.return_value('dnsv6-servers server-3'): + config_data['dnsv6'].append( + c.return_value('dnsv6-servers server-3')) + if c.exists('wins-servers'): + if c.return_value('wins-servers server-1'): + config_data['wins'].append(c.return_value('wins-servers server-1')) + if c.return_value('wins-servers server-2'): + config_data['wins'].append(c.return_value('wins-servers server-2')) + if c.exists('client-ip-pool'): + if c.exists('client-ip-pool start'): + config_data['client_ip_pool'] = c.return_value( + 'client-ip-pool start') + if c.exists('client-ip-pool stop'): + config_data['client_ip_pool'] += '-' + re.search( + '[0-9]+$', c.return_value('client-ip-pool stop')).group(0) + else: + raise ConfigError('client ip pool stop required') + if c.exists('client-ip-pool subnet'): + config_data['client_ip_subnets'] = c.return_values( + 'client-ip-pool subnet') + if c.exists('client-ipv6-pool prefix'): + config_data['client_ipv6_pool'][ + 'prefix'] = c.return_values('client-ipv6-pool prefix') + if c.exists('client-ipv6-pool delegate-prefix'): + config_data['client_ipv6_pool']['delegate-prefix'] = c.return_values( + 'client-ipv6-pool delegate-prefix') + if c.exists('limits'): + if c.exists('limits burst'): + config_data['limits']['burst'] = str( + c.return_value('limits burst')) + if c.exists('limits timeout'): + config_data['limits']['timeout'] = str( + c.return_value('limits timeout')) + if c.exists('limits connection-limit'): + config_data['limits']['conn-limit'] = str( + c.return_value('limits connection-limit')) + if c.exists('snmp'): + config_data['snmp'] = 'enable' + if c.exists('snmp master-agent'): + config_data['snmp'] = 'enable-ma' + + # authentication mode local + if not c.exists('authentication mode'): + raise ConfigError('pppoe-server authentication mode required') + + if c.exists('authentication mode local'): + if c.exists('authentication local-users username'): + for usr in c.list_nodes('authentication local-users username'): + config_data['authentication']['local-users'].update( + { + usr: { + 'passwd': None, + 'state': 'enabled', + 'ip': '*', + 'upload': None, + 'download': None + } + } + ) + if c.exists('authentication local-users username ' + usr + ' password'): + config_data['authentication']['local-users'][usr]['passwd'] = c.return_value( + 'authentication local-users username ' + usr + ' password') + if c.exists('authentication local-users username ' + usr + ' disable'): + config_data['authentication'][ + 'local-users'][usr]['state'] = 'disable' + if c.exists('authentication local-users username ' + usr + ' static-ip'): + config_data['authentication']['local-users'][usr]['ip'] = c.return_value( + 'authentication local-users username ' + usr + ' static-ip') + if c.exists('authentication local-users username ' + usr + ' rate-limit download'): + config_data['authentication']['local-users'][usr]['download'] = c.return_value( + 'authentication local-users username ' + usr + ' rate-limit download') + if c.exists('authentication local-users username ' + usr + ' rate-limit upload'): + config_data['authentication']['local-users'][usr]['upload'] = c.return_value( + 'authentication local-users username ' + usr + ' rate-limit upload') + + # authentication mode radius servers and settings + + if c.exists('authentication mode radius'): + config_data['authentication']['mode'] = 'radius' + rsrvs = c.list_nodes('authentication radius-server') + for rsrv in rsrvs: + if c.return_value('authentication radius-server ' + rsrv + ' fail-time') == None: + ftime = '0' + else: + ftime = str( + c.return_value('authentication radius-server ' + rsrv + ' fail-time')) + if c.return_value('authentication radius-server ' + rsrv + ' req-limit') == None: + reql = '0' + else: + reql = str( + c.return_value('authentication radius-server ' + rsrv + ' req-limit')) + config_data['authentication']['radiussrv'].update( + { + rsrv: { + 'secret': c.return_value('authentication radius-server ' + rsrv + ' secret'), + 'fail-time': ftime, + 'req-limit': reql + } + } + ) + + # advanced radius-setting + if c.exists('authentication radius-settings'): + if c.exists('authentication radius-settings acct-timeout'): + config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value( + 'authentication radius-settings acct-timeout') + if c.exists('authentication radius-settings max-try'): + config_data['authentication']['radiusopt'][ + 'max-try'] = c.return_value('authentication radius-settings max-try') + if c.exists('authentication radius-settings timeout'): + config_data['authentication']['radiusopt'][ + 'timeout'] = c.return_value('authentication radius-settings timeout') + if c.exists('authentication radius-settings nas-identifier'): + config_data['authentication']['radiusopt']['nas-id'] = c.return_value( + 'authentication radius-settings nas-identifier') + if c.exists('authentication radius-settings nas-ip-address'): + config_data['authentication']['radiusopt']['nas-ip'] = c.return_value( + 'authentication radius-settings nas-ip-address') + if c.exists('authentication radius-settings dae-server'): + config_data['authentication']['radiusopt'].update( + { + 'dae-srv': { + 'ip-addr': c.return_value('authentication radius-settings dae-server ip-address'), + 'port': c.return_value('authentication radius-settings dae-server port'), + 'secret': str(c.return_value('authentication radius-settings dae-server secret')) + } + } + ) + # filter-id is the internal accel default if attribute is empty + # set here as default for visibility which may change in the future + if c.exists('authentication radius-settings rate-limit enable'): + if not c.exists('authentication radius-settings rate-limit attribute'): + config_data['authentication']['radiusopt']['shaper'] = { + 'attr': 'Filter-Id' + } + else: + config_data['authentication']['radiusopt']['shaper'] = { + 'attr': c.return_value('authentication radius-settings rate-limit attribute') + } + if c.exists('authentication radius-settings rate-limit vendor'): + config_data['authentication']['radiusopt']['shaper'][ + 'vendor'] = c.return_value('authentication radius-settings rate-limit vendor') + + if c.exists('mtu'): + config_data['mtu'] = c.return_value('mtu') + + # ppp_options + ppp_options = {} + if c.exists('ppp-options'): + if c.exists('ppp-options ccp'): + ppp_options['ccp'] = c.return_value('ppp-options ccp') + if c.exists('ppp-options min-mtu'): + ppp_options['min-mtu'] = c.return_value('ppp-options min-mtu') + if c.exists('ppp-options mru'): + ppp_options['mru'] = c.return_value('ppp-options mru') + if c.exists('ppp-options mppe deny'): + ppp_options['mppe'] = 'deny' + if c.exists('ppp-options mppe require'): + ppp_options['mppe'] = 'requre' + if c.exists('ppp-options mppe prefer'): + ppp_options['mppe'] = 'prefer' + if c.exists('ppp-options lcp-echo-failure'): + ppp_options['lcp-echo-failure'] = c.return_value( + 'ppp-options lcp-echo-failure') + if c.exists('ppp-options lcp-echo-interval'): + ppp_options['lcp-echo-interval'] = c.return_value( + 'ppp-options lcp-echo-interval') + if c.exists('ppp-options ipv4'): + ppp_options['ipv4'] = c.return_value('ppp-options ipv4') + if c.exists('ppp-options ipv6'): + ppp_options['ipv6'] = c.return_value('ppp-options ipv6') + if c.exists('ppp-options ipv6-accept-peer-intf-id'): + ppp_options['ipv6-accept-peer-intf-id'] = 1 + if c.exists('ppp-options ipv6-intf-id'): + ppp_options['ipv6-intf-id'] = c.return_value( + 'ppp-options ipv6-intf-id') + if c.exists('ppp-options ipv6-peer-intf-id'): + ppp_options['ipv6-peer-intf-id'] = c.return_value( + 'ppp-options ipv6-peer-intf-id') + if c.exists('ppp-options lcp-echo-timeout'): + ppp_options['lcp-echo-timeout'] = c.return_value( + 'ppp-options lcp-echo-timeout') + + if len(ppp_options) != 0: + config_data['ppp_options'] = ppp_options + + if c.exists(['session-control']): + config_data['sesscrtl'] = c.return_value(['session-control']) + + return config_data + def verify(c): - if c == None: - return None - ### vertify auth settings - if c['authentication']['mode'] == 'local': - if not c['authentication']['local-users']: - raise ConfigError('pppoe-server authentication local-users required') - - for usr in c['authentication']['local-users']: - if not c['authentication']['local-users'][usr]['passwd']: - raise ConfigError('user ' + usr + ' requires a password') - ### if up/download is set, check that both have a value - if c['authentication']['local-users'][usr]['upload']: - if not c['authentication']['local-users'][usr]['download']: - raise ConfigError('user ' + usr + ' requires download speed value') - if c['authentication']['local-users'][usr]['download']: - if not c['authentication']['local-users'][usr]['upload']: - raise ConfigError('user ' + usr + ' requires upload speed value') - - if c['authentication']['mode'] == 'radius': - if len(c['authentication']['radiussrv']) == 0: - raise ConfigError('radius server required') - for rsrv in c['authentication']['radiussrv']: - if c['authentication']['radiussrv'][rsrv]['secret'] == None: - raise ConfigError('radius server ' + rsrv + ' needs a secret configured') - - ### local ippool and gateway settings config checks - - if c['client_ip_subnets'] or c['client_ip_pool']: - if not c['ppp_gw']: - raise ConfigError('pppoe-server local-ip required') - - if c['ppp_gw'] and not c['client_ip_subnets'] and not c['client_ip_pool']: - print ("Warning: No pppoe client IPv4 pool defined") + if c == None: + return None + # vertify auth settings + if c['authentication']['mode'] == 'local': + if not c['authentication']['local-users']: + raise ConfigError( + 'pppoe-server authentication local-users required') + + for usr in c['authentication']['local-users']: + if not c['authentication']['local-users'][usr]['passwd']: + raise ConfigError('user ' + usr + ' requires a password') + # if up/download is set, check that both have a value + if c['authentication']['local-users'][usr]['upload']: + if not c['authentication']['local-users'][usr]['download']: + raise ConfigError( + 'user ' + usr + ' requires download speed value') + if c['authentication']['local-users'][usr]['download']: + if not c['authentication']['local-users'][usr]['upload']: + raise ConfigError( + 'user ' + usr + ' requires upload speed value') + + if c['authentication']['mode'] == 'radius': + if len(c['authentication']['radiussrv']) == 0: + raise ConfigError('radius server required') + for rsrv in c['authentication']['radiussrv']: + if c['authentication']['radiussrv'][rsrv]['secret'] == None: + raise ConfigError( + 'radius server ' + rsrv + ' needs a secret configured') + + # local ippool and gateway settings config checks + + if c['client_ip_subnets'] or c['client_ip_pool']: + if not c['ppp_gw']: + raise ConfigError('pppoe-server local-ip required') + + if c['ppp_gw'] and not c['client_ip_subnets'] and not c['client_ip_pool']: + print ("Warning: No pppoe client IPv4 pool defined") + def generate(c): - if c == None: - return None - - ### accel-cmd reload doesn't work so any change results in a restart of the daemon - try: - if os.cpu_count() == 1: - c['thread_cnt'] = 1 - else: - c['thread_cnt'] = int(os.cpu_count()/2) - except KeyError: - if os.cpu_count() == 1: - c['thread_cnt'] = 1 - else: - c['thread_cnt'] = int(os.cpu_count()/2) + if c == None: + return None + + # accel-cmd reload doesn't work so any change results in a restart of the + # daemon + try: + if os.cpu_count() == 1: + c['thread_cnt'] = 1 + else: + c['thread_cnt'] = int(os.cpu_count() / 2) + except KeyError: + if os.cpu_count() == 1: + c['thread_cnt'] = 1 + else: + c['thread_cnt'] = int(os.cpu_count() / 2) - tmpl = jinja2.Template(pppoe_config, trim_blocks=True) - config_text = tmpl.render(c) - open(pppoe_conf,'w').write(config_text) + tmpl = jinja2.Template(pppoe_config, trim_blocks=True) + config_text = tmpl.render(c) + open(pppoe_conf, 'w').write(config_text) - if c['authentication']['local-users']: - write_chap_secrets(c) + if c['authentication']['local-users']: + write_chap_secrets(c) + + return c - return c def apply(c): - if c == None: - if os.path.exists(pidfile): - accel_cmd('shutdown hard') - if os.path.exists(pidfile): - os.remove(pidfile) - return None - - if not os.path.exists(pidfile): - ret = subprocess.call(['/usr/sbin/accel-pppd','-c',pppoe_conf,'-p',pidfile,'-d']) - chk_con() - if ret !=0 and os.path.exists(pidfile): - os.remove(pidfile) - raise ConfigError('accel-pppd failed to start') - else: - accel_cmd('restart') - sl.syslog(sl.LOG_NOTICE, "reloading config via daemon restart") + if c == None: + if os.path.exists(pidfile): + accel_cmd('shutdown hard') + if os.path.exists(pidfile): + os.remove(pidfile) + return None + + if not os.path.exists(pidfile): + ret = subprocess.call( + ['/usr/sbin/accel-pppd', '-c', pppoe_conf, '-p', pidfile, '-d']) + chk_con() + if ret != 0 and os.path.exists(pidfile): + os.remove(pidfile) + raise ConfigError('accel-pppd failed to start') + else: + accel_cmd('restart') + sl.syslog(sl.LOG_NOTICE, "reloading config via daemon restart") if __name__ == '__main__': - try: - c = get_config() - verify(c) - generate(c) - apply(c) - except ConfigError as e: - print(e) - sys.exit(1) + try: + c = get_config() + verify(c) + generate(c) + apply(c) + except ConfigError as e: + print(e) + sys.exit(1) |