diff options
Diffstat (limited to 'src')
53 files changed, 846 insertions, 475 deletions
diff --git a/src/conf_mode/containers.py b/src/conf_mode/containers.py index ab992e415..2e14e0b25 100755 --- a/src/conf_mode/containers.py +++ b/src/conf_mode/containers.py @@ -158,7 +158,7 @@ def verify(container): v6_prefix = 0 # If ipv4-prefix not defined for user-defined network if 'prefix' not in network_config: - raise ConfigError(f'prefix for network "{net}" must be defined!') + raise ConfigError(f'prefix for network "{network}" must be defined!') for prefix in network_config['prefix']: if is_ipv4(prefix): v4_prefix += 1 diff --git a/src/conf_mode/flow_accounting_conf.py b/src/conf_mode/flow_accounting_conf.py index 0a4559ade..daad00067 100755 --- a/src/conf_mode/flow_accounting_conf.py +++ b/src/conf_mode/flow_accounting_conf.py @@ -169,7 +169,8 @@ def get_config(): 'configured': vc.exists('system flow-accounting sflow'), 'agent-address': vc.return_value('system flow-accounting sflow agent-address'), 'sampling-rate': vc.return_value('system flow-accounting sflow sampling-rate'), - 'servers': None + 'servers': None, + 'source-address': vc.return_value('system flow-accounting sflow source-address') }, 'netflow': { 'configured': vc.exists('system flow-accounting netflow'), diff --git a/src/conf_mode/http-api.py b/src/conf_mode/http-api.py index 7e4b117c8..4bfcbeb47 100755 --- a/src/conf_mode/http-api.py +++ b/src/conf_mode/http-api.py @@ -100,7 +100,7 @@ def apply(http_api): call('systemctl stop vyos-http-api.service') # Let uvicorn settle before restarting Nginx - time.sleep(2) + time.sleep(1) cmd(f'{vyos_conf_scripts_dir}/https.py', raising=ConfigError) diff --git a/src/conf_mode/policy.py b/src/conf_mode/policy.py index 1a03d520b..e251396c7 100755 --- a/src/conf_mode/policy.py +++ b/src/conf_mode/policy.py @@ -171,9 +171,7 @@ def verify(policy): def generate(policy): if not policy: - policy['new_frr_config'] = '' return None - policy['new_frr_config'] = render_to_string('frr/policy.frr.tmpl', policy) return None @@ -190,8 +188,9 @@ def apply(policy): frr_cfg.modify_section(r'^bgp community-list .*') frr_cfg.modify_section(r'^bgp extcommunity-list .*') frr_cfg.modify_section(r'^bgp large-community-list .*') - frr_cfg.modify_section(r'^route-map .*') - frr_cfg.add_before('^line vty', policy['new_frr_config']) + frr_cfg.modify_section(r'^route-map .*', stop_pattern='^exit', remove_stop_mark=True) + if 'new_frr_config' in policy: + frr_cfg.add_before(frr.default_add_before, policy['new_frr_config']) frr_cfg.commit_configuration(bgp_daemon) # The route-map used for the FIB (zebra) is part of the zebra daemon @@ -200,19 +199,11 @@ def apply(policy): frr_cfg.modify_section(r'^ipv6 access-list .*') frr_cfg.modify_section(r'^ip prefix-list .*') frr_cfg.modify_section(r'^ipv6 prefix-list .*') - frr_cfg.modify_section(r'^route-map .*') - frr_cfg.add_before('^line vty', policy['new_frr_config']) + frr_cfg.modify_section(r'^route-map .*', stop_pattern='^exit', remove_stop_mark=True) + if 'new_frr_config' in policy: + frr_cfg.add_before(frr.default_add_before, policy['new_frr_config']) frr_cfg.commit_configuration(zebra_daemon) - # If FRR config is blank, rerun the blank commit x times due to frr-reload - # behavior/bug not properly clearing out on one commit. - if policy['new_frr_config'] == '': - for a in range(5): - frr_cfg.commit_configuration(zebra_daemon) - - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() - return None if __name__ == '__main__': diff --git a/src/conf_mode/protocols_bfd.py b/src/conf_mode/protocols_bfd.py index 539fd7b8e..6981d0db1 100755 --- a/src/conf_mode/protocols_bfd.py +++ b/src/conf_mode/protocols_bfd.py @@ -16,10 +16,9 @@ import os -from sys import exit - from vyos.config import Config from vyos.configdict import dict_merge +from vyos.configverify import verify_vrf from vyos.template import is_ipv6 from vyos.template import render_to_string from vyos.validate import is_ipv6_link_local @@ -35,8 +34,8 @@ def get_config(config=None): else: conf = Config() base = ['protocols', 'bfd'] - bfd = conf.get_config_dict(base, get_first_key=True) - + bfd = conf.get_config_dict(base, key_mangling=('-', '_'), + get_first_key=True) # Bail out early if configuration tree does not exist if not conf.exists(base): return bfd @@ -85,22 +84,26 @@ def verify(bfd): if 'source' in peer_config and 'interface' in peer_config['source']: raise ConfigError('Multihop and source interface cannot be used together') + if 'vrf' in peer_config: + verify_vrf(peer_config) + return None def generate(bfd): if not bfd: - bfd['new_frr_config'] = '' return None - bfd['new_frr_config'] = render_to_string('frr/bfdd.frr.tmpl', bfd) def apply(bfd): + bfd_daemon = 'bfdd' + # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - frr_cfg.load_configuration() - frr_cfg.modify_section('^bfd', '') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', bfd['new_frr_config']) - frr_cfg.commit_configuration() + frr_cfg.load_configuration(bfd_daemon) + frr_cfg.modify_section('^bfd', stop_pattern='^exit', remove_stop_mark=True) + if 'new_frr_config' in bfd: + frr_cfg.add_before(frr.default_add_before, bfd['new_frr_config']) + frr_cfg.commit_configuration(bfd_daemon) return None diff --git a/src/conf_mode/protocols_bgp.py b/src/conf_mode/protocols_bgp.py index 68284e0f9..03fb17ba7 100755 --- a/src/conf_mode/protocols_bgp.py +++ b/src/conf_mode/protocols_bgp.py @@ -255,21 +255,11 @@ def verify(bgp): tmp = dict_search(f'route_map.vpn.{export_import}', afi_config) if tmp: verify_route_map(tmp, bgp) - if afi in ['l2vpn_evpn'] and 'vrf' not in bgp: - # Some L2VPN EVPN AFI options are only supported under VRF - if 'vni' in afi_config: - for vni, vni_config in afi_config['vni'].items(): - if 'rd' in vni_config: - raise ConfigError('VNI route-distinguisher is only supported under EVPN VRF') - if 'route_target' in vni_config: - raise ConfigError('VNI route-target is only supported under EVPN VRF') return None def generate(bgp): if not bgp or 'deleted' in bgp: - bgp['frr_bgpd_config'] = '' - bgp['frr_zebra_config'] = '' return None bgp['protocol'] = 'bgp' # required for frr/vrf.route-map.frr.tmpl @@ -287,8 +277,9 @@ def apply(bgp): # The route-map used for the FIB (zebra) is part of the zebra daemon frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'(\s+)?ip protocol bgp route-map [-a-zA-Z0-9.]+$', '', '(\s|!)') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', bgp['frr_zebra_config']) + frr_cfg.modify_section(r'(\s+)?ip protocol bgp route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') + if 'frr_zebra_config' in bgp: + frr_cfg.add_before(frr.default_add_before, bgp['frr_zebra_config']) frr_cfg.commit_configuration(zebra_daemon) # Generate empty helper string which can be ammended to FRR commands, it @@ -298,13 +289,11 @@ def apply(bgp): vrf = ' vrf ' + bgp['vrf'] frr_cfg.load_configuration(bgp_daemon) - frr_cfg.modify_section(f'^router bgp \d+{vrf}$', '') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', bgp['frr_bgpd_config']) + frr_cfg.modify_section(f'^router bgp \d+{vrf}', stop_pattern='^exit', remove_stop_mark=True) + if 'frr_bgpd_config' in bgp: + frr_cfg.add_before(frr.default_add_before, bgp['frr_bgpd_config']) frr_cfg.commit_configuration(bgp_daemon) - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() - return None if __name__ == '__main__': diff --git a/src/conf_mode/protocols_isis.py b/src/conf_mode/protocols_isis.py index 4505e2496..9b4b215de 100755 --- a/src/conf_mode/protocols_isis.py +++ b/src/conf_mode/protocols_isis.py @@ -56,10 +56,10 @@ def get_config(config=None): # instead of the VRF instance. if vrf: isis['vrf'] = vrf - # As we no re-use this Python handler for both VRF and non VRF instances for - # IS-IS we need to find out if any interfaces changed so properly adjust - # the FRR configuration and not by acctident change interfaces from a - # different VRF. + # FRR has VRF support for different routing daemons. As interfaces belong + # to VRFs - or the global VRF, we need to check for changed interfaces so + # that they will be properly rendered for the FRR config. Also this eases + # removal of interfaces from the running configuration. interfaces_removed = node_changed(conf, base + ['interface']) if interfaces_removed: isis['interface_removed'] = list(interfaces_removed) @@ -196,8 +196,6 @@ def verify(isis): def generate(isis): if not isis or 'deleted' in isis: - isis['frr_isisd_config'] = '' - isis['frr_zebra_config'] = '' return None isis['protocol'] = 'isis' # required for frr/vrf.route-map.frr.tmpl @@ -214,8 +212,9 @@ def apply(isis): # The route-map used for the FIB (zebra) is part of the zebra daemon frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'(\s+)?ip protocol isis route-map [-a-zA-Z0-9.]+$', '', '(\s|!)') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', isis['frr_zebra_config']) + frr_cfg.modify_section('(\s+)?ip protocol isis route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') + if 'frr_zebra_config' in isis: + frr_cfg.add_before(frr.default_add_before, isis['frr_zebra_config']) frr_cfg.commit_configuration(zebra_daemon) # Generate empty helper string which can be ammended to FRR commands, it @@ -225,19 +224,18 @@ def apply(isis): vrf = ' vrf ' + isis['vrf'] frr_cfg.load_configuration(isis_daemon) - frr_cfg.modify_section(f'^router isis VyOS{vrf}$', '') + frr_cfg.modify_section(f'^router isis VyOS{vrf}', stop_pattern='^exit', remove_stop_mark=True) for key in ['interface', 'interface_removed']: if key not in isis: continue for interface in isis[key]: - frr_cfg.modify_section(f'^interface {interface}{vrf}$', '') + frr_cfg.modify_section(f'^interface {interface}{vrf}', stop_pattern='^exit', remove_stop_mark=True) - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', isis['frr_isisd_config']) - frr_cfg.commit_configuration(isis_daemon) + if 'frr_isisd_config' in isis: + frr_cfg.add_before(frr.default_add_before, isis['frr_isisd_config']) - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() + frr_cfg.commit_configuration(isis_daemon) return None diff --git a/src/conf_mode/protocols_mpls.py b/src/conf_mode/protocols_mpls.py index 3b27608da..0b0c7d07b 100755 --- a/src/conf_mode/protocols_mpls.py +++ b/src/conf_mode/protocols_mpls.py @@ -66,36 +66,24 @@ def verify(mpls): def generate(mpls): # If there's no MPLS config generated, create dictionary key with no value. - if not mpls: - mpls['new_frr_config'] = '' + if not mpls or 'deleted' in mpls: return None - mpls['new_frr_config'] = render_to_string('frr/ldpd.frr.tmpl', mpls) + mpls['frr_ldpd_config'] = render_to_string('frr/ldpd.frr.tmpl', mpls) return None def apply(mpls): - # Define dictionary that will load FRR config - frr_cfg = {} + ldpd_damon = 'ldpd' + # Save original configuration prior to starting any commit actions - frr_cfg['original_config'] = frr.get_configuration(daemon='ldpd') - frr_cfg['modified_config'] = frr.replace_section(frr_cfg['original_config'], mpls['new_frr_config'], from_re='mpls.*') - - # If FRR config is blank, rerun the blank commit three times due to frr-reload - # behavior/bug not properly clearing out on one commit. - if mpls['new_frr_config'] == '': - for x in range(3): - frr.reload_configuration(frr_cfg['modified_config'], daemon='ldpd') - elif not 'ldp' in mpls: - for x in range(3): - frr.reload_configuration(frr_cfg['modified_config'], daemon='ldpd') - else: - # FRR mark configuration will test for syntax errors and throws an - # exception if any syntax errors is detected - frr.mark_configuration(frr_cfg['modified_config']) + frr_cfg = frr.FRRConfig() + + frr_cfg.load_configuration(ldpd_damon) + frr_cfg.modify_section(f'^mpls ldp', stop_pattern='^exit', remove_stop_mark=True) - # Commit resulting configuration to FRR, this will throw CommitError - # on failure - frr.reload_configuration(frr_cfg['modified_config'], daemon='ldpd') + if 'frr_ldpd_config' in mpls: + frr_cfg.add_before(frr.default_add_before, mpls['frr_ldpd_config']) + frr_cfg.commit_configuration(ldpd_damon) # Set number of entries in the platform label tables labels = '0' @@ -122,7 +110,7 @@ def apply(mpls): system_interfaces = [] # Populate system interfaces list with local MPLS capable interfaces for interface in glob('/proc/sys/net/mpls/conf/*'): - system_interfaces.append(os.path.basename(interface)) + system_interfaces.append(os.path.basename(interface)) # This is where the comparison is done on if an interface needs to be enabled/disabled. for system_interface in system_interfaces: interface_state = read_file(f'/proc/sys/net/mpls/conf/{system_interface}/input') @@ -138,7 +126,7 @@ def apply(mpls): system_interfaces = [] # If MPLS interfaces are not configured, set MPLS processing disabled for interface in glob('/proc/sys/net/mpls/conf/*'): - system_interfaces.append(os.path.basename(interface)) + system_interfaces.append(os.path.basename(interface)) for system_interface in system_interfaces: system_interface = system_interface.replace('.', '/') call(f'sysctl -wq net.mpls.conf.{system_interface}.input=0') diff --git a/src/conf_mode/protocols_ospf.py b/src/conf_mode/protocols_ospf.py index 6ccda2e5a..4895cde6f 100755 --- a/src/conf_mode/protocols_ospf.py +++ b/src/conf_mode/protocols_ospf.py @@ -56,10 +56,10 @@ def get_config(config=None): # instead of the VRF instance. if vrf: ospf['vrf'] = vrf - # As we no re-use this Python handler for both VRF and non VRF instances for - # OSPF we need to find out if any interfaces changed so properly adjust - # the FRR configuration and not by acctident change interfaces from a - # different VRF. + # FRR has VRF support for different routing daemons. As interfaces belong + # to VRFs - or the global VRF, we need to check for changed interfaces so + # that they will be properly rendered for the FRR config. Also this eases + # removal of interfaces from the running configuration. interfaces_removed = node_changed(conf, base + ['interface']) if interfaces_removed: ospf['interface_removed'] = list(interfaces_removed) @@ -177,11 +177,11 @@ def verify(ospf): raise ConfigError('Can not use OSPF interface area and area ' \ 'network configuration at the same time!') - if 'vrf' in ospf: # If interface specific options are set, we must ensure that the # interface is bound to our requesting VRF. Due to the VyOS # priorities the interface is bound to the VRF after creation of # the VRF itself, and before any routing protocol is configured. + if 'vrf' in ospf: vrf = ospf['vrf'] tmp = get_interface_config(interface) if 'master' not in tmp or tmp['master'] != vrf: @@ -191,8 +191,6 @@ def verify(ospf): def generate(ospf): if not ospf or 'deleted' in ospf: - ospf['frr_ospfd_config'] = '' - ospf['frr_zebra_config'] = '' return None ospf['protocol'] = 'ospf' # required for frr/vrf.route-map.frr.tmpl @@ -209,8 +207,9 @@ def apply(ospf): # The route-map used for the FIB (zebra) is part of the zebra daemon frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'(\s+)?ip protocol ospf route-map [-a-zA-Z0-9.]+$', '', '(\s|!)') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', ospf['frr_zebra_config']) + frr_cfg.modify_section('(\s+)?ip protocol ospf route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') + if 'frr_zebra_config' in ospf: + frr_cfg.add_before(frr.default_add_before, ospf['frr_zebra_config']) frr_cfg.commit_configuration(zebra_daemon) # Generate empty helper string which can be ammended to FRR commands, it @@ -220,20 +219,18 @@ def apply(ospf): vrf = ' vrf ' + ospf['vrf'] frr_cfg.load_configuration(ospf_daemon) - frr_cfg.modify_section(f'^router ospf{vrf}$', '') + frr_cfg.modify_section(f'^router ospf{vrf}', stop_pattern='^exit', remove_stop_mark=True) for key in ['interface', 'interface_removed']: if key not in ospf: continue for interface in ospf[key]: - frr_cfg.modify_section(f'^interface {interface}{vrf}$', '') + frr_cfg.modify_section(f'^interface {interface}{vrf}', stop_pattern='^exit', remove_stop_mark=True) - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', ospf['frr_ospfd_config']) + if 'frr_ospfd_config' in ospf: + frr_cfg.add_before(frr.default_add_before, ospf['frr_ospfd_config']) frr_cfg.commit_configuration(ospf_daemon) - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() - return None if __name__ == '__main__': diff --git a/src/conf_mode/protocols_ospfv3.py b/src/conf_mode/protocols_ospfv3.py index 536ffa690..d0460b830 100755 --- a/src/conf_mode/protocols_ospfv3.py +++ b/src/conf_mode/protocols_ospfv3.py @@ -17,30 +17,53 @@ import os from sys import exit +from sys import argv from vyos.config import Config from vyos.configdict import dict_merge +from vyos.configdict import node_changed from vyos.configverify import verify_common_route_maps from vyos.template import render_to_string from vyos.ifconfig import Interface +from vyos.util import get_interface_config from vyos.xml import defaults from vyos import ConfigError from vyos import frr from vyos import airbag airbag.enable() -frr_daemon = 'ospf6d' - def get_config(config=None): if config: conf = config else: conf = Config() - base = ['protocols', 'ospfv3'] + + vrf = None + if len(argv) > 1: + vrf = argv[1] + + base_path = ['protocols', 'ospfv3'] + + # eqivalent of the C foo ? 'a' : 'b' statement + base = vrf and ['vrf', 'name', vrf, 'protocols', 'ospfv3'] or base_path ospfv3 = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True) + # Assign the name of our VRF context. This MUST be done before the return + # statement below, else on deletion we will delete the default instance + # instead of the VRF instance. + if vrf: ospfv3['vrf'] = vrf + + # FRR has VRF support for different routing daemons. As interfaces belong + # to VRFs - or the global VRF, we need to check for changed interfaces so + # that they will be properly rendered for the FRR config. Also this eases + # removal of interfaces from the running configuration. + interfaces_removed = node_changed(conf, base + ['interface']) + if interfaces_removed: + ospfv3['interface_removed'] = list(interfaces_removed) + # Bail out early if configuration tree does not exist if not conf.exists(base): + ospfv3.update({'deleted' : ''}) return ospfv3 # We also need some additional information from the config, prefix-lists @@ -61,33 +84,56 @@ def verify(ospfv3): verify_common_route_maps(ospfv3) if 'interface' in ospfv3: - for ifname, if_config in ospfv3['interface'].items(): - if 'ifmtu' in if_config: - mtu = Interface(ifname).get_mtu() - if int(if_config['ifmtu']) > int(mtu): + for interface, interface_config in ospfv3['interface'].items(): + if 'ifmtu' in interface_config: + mtu = Interface(interface).get_mtu() + if int(interface_config['ifmtu']) > int(mtu): raise ConfigError(f'OSPFv3 ifmtu can not exceed physical MTU of "{mtu}"') + # If interface specific options are set, we must ensure that the + # interface is bound to our requesting VRF. Due to the VyOS + # priorities the interface is bound to the VRF after creation of + # the VRF itself, and before any routing protocol is configured. + if 'vrf' in ospfv3: + vrf = ospfv3['vrf'] + tmp = get_interface_config(interface) + if 'master' not in tmp or tmp['master'] != vrf: + raise ConfigError(f'Interface {interface} is not a member of VRF {vrf}!') + return None def generate(ospfv3): - if not ospfv3: - ospfv3['new_frr_config'] = '' + if not ospfv3 or 'deleted' in ospfv3: return None ospfv3['new_frr_config'] = render_to_string('frr/ospf6d.frr.tmpl', ospfv3) return None def apply(ospfv3): + ospf6_daemon = 'ospf6d' + # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - frr_cfg.load_configuration(frr_daemon) - frr_cfg.modify_section(r'^interface \S+', '') - frr_cfg.modify_section('^router ospf6$', '') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', ospfv3['new_frr_config']) - frr_cfg.commit_configuration(frr_daemon) - - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() + + # Generate empty helper string which can be ammended to FRR commands, it + # will be either empty (default VRF) or contain the "vrf <name" statement + vrf = '' + if 'vrf' in ospfv3: + vrf = ' vrf ' + ospfv3['vrf'] + + frr_cfg.load_configuration(ospf6_daemon) + frr_cfg.modify_section(f'^router ospf6{vrf}', stop_pattern='^exit', remove_stop_mark=True) + + for key in ['interface', 'interface_removed']: + if key not in ospfv3: + continue + for interface in ospfv3[key]: + frr_cfg.modify_section(f'^interface {interface}{vrf}', stop_pattern='^exit', remove_stop_mark=True) + + if 'new_frr_config' in ospfv3: + frr_cfg.add_before(frr.default_add_before, ospfv3['new_frr_config']) + + frr_cfg.commit_configuration(ospf6_daemon) return None diff --git a/src/conf_mode/protocols_rip.py b/src/conf_mode/protocols_rip.py index 6b78f6f2d..300f56489 100755 --- a/src/conf_mode/protocols_rip.py +++ b/src/conf_mode/protocols_rip.py @@ -20,6 +20,7 @@ from sys import exit from vyos.config import Config from vyos.configdict import dict_merge +from vyos.configdict import node_changed from vyos.configverify import verify_common_route_maps from vyos.configverify import verify_access_list from vyos.configverify import verify_prefix_list @@ -39,8 +40,17 @@ def get_config(config=None): base = ['protocols', 'rip'] rip = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True) + # FRR has VRF support for different routing daemons. As interfaces belong + # to VRFs - or the global VRF, we need to check for changed interfaces so + # that they will be properly rendered for the FRR config. Also this eases + # removal of interfaces from the running configuration. + interfaces_removed = node_changed(conf, base + ['interface']) + if interfaces_removed: + rip['interface_removed'] = list(interfaces_removed) + # Bail out early if configuration tree does not exist if not conf.exists(base): + rip.update({'deleted' : ''}) return rip # We have gathered the dict representation of the CLI, but there are default @@ -89,12 +99,10 @@ def verify(rip): f'with "split-horizon disable" for "{interface}"!') def generate(rip): - if not rip: - rip['new_frr_config'] = '' + if not rip or 'deleted' in rip: return None rip['new_frr_config'] = render_to_string('frr/ripd.frr.tmpl', rip) - return None def apply(rip): @@ -106,19 +114,22 @@ def apply(rip): # The route-map used for the FIB (zebra) is part of the zebra daemon frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'^ip protocol rip route-map [-a-zA-Z0-9.]+$', '') + frr_cfg.modify_section('^ip protocol rip route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') frr_cfg.commit_configuration(zebra_daemon) frr_cfg.load_configuration(rip_daemon) - frr_cfg.modify_section(r'key chain \S+', '') - frr_cfg.modify_section(r'interface \S+', '') - frr_cfg.modify_section('^router rip$', '') + frr_cfg.modify_section('^key chain \S+', stop_pattern='^exit', remove_stop_mark=True) + frr_cfg.modify_section('^router rip', stop_pattern='^exit', remove_stop_mark=True) - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', rip['new_frr_config']) - frr_cfg.commit_configuration(rip_daemon) + for key in ['interface', 'interface_removed']: + if key not in rip: + continue + for interface in rip[key]: + frr_cfg.modify_section(f'^interface {interface}', stop_pattern='^exit', remove_stop_mark=True) - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() + if 'new_frr_config' in rip: + frr_cfg.add_before(frr.default_add_before, rip['new_frr_config']) + frr_cfg.commit_configuration(rip_daemon) return None diff --git a/src/conf_mode/protocols_ripng.py b/src/conf_mode/protocols_ripng.py index bc4954f63..d9b8c0b30 100755 --- a/src/conf_mode/protocols_ripng.py +++ b/src/conf_mode/protocols_ripng.py @@ -31,8 +31,6 @@ from vyos import frr from vyos import airbag airbag.enable() -frr_daemon = 'ripngd' - def get_config(config=None): if config: conf = config @@ -99,17 +97,24 @@ def generate(ripng): return None def apply(ripng): + ripng_daemon = 'ripngd' + zebra_daemon = 'zebra' + # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - frr_cfg.load_configuration(frr_daemon) - frr_cfg.modify_section(r'key chain \S+', '') - frr_cfg.modify_section(r'interface \S+', '') - frr_cfg.modify_section('router ripng', '') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', ripng['new_frr_config']) - frr_cfg.commit_configuration(frr_daemon) - - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() + + # The route-map used for the FIB (zebra) is part of the zebra daemon + frr_cfg.load_configuration(zebra_daemon) + frr_cfg.modify_section('^ipv6 protocol ripng route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') + frr_cfg.commit_configuration(zebra_daemon) + + frr_cfg.load_configuration(ripng_daemon) + frr_cfg.modify_section('key chain \S+', stop_pattern='^exit', remove_stop_mark=True) + frr_cfg.modify_section('interface \S+', stop_pattern='^exit', remove_stop_mark=True) + frr_cfg.modify_section('^router ripng', stop_pattern='^exit', remove_stop_mark=True) + if 'new_frr_config' in ripng: + frr_cfg.add_before(frr.default_add_before, ripng['new_frr_config']) + frr_cfg.commit_configuration(ripng_daemon) return None diff --git a/src/conf_mode/protocols_rpki.py b/src/conf_mode/protocols_rpki.py index 947c8ab7a..51ad0d315 100755 --- a/src/conf_mode/protocols_rpki.py +++ b/src/conf_mode/protocols_rpki.py @@ -28,8 +28,6 @@ from vyos import frr from vyos import airbag airbag.enable() -frr_daemon = 'bgpd' - def get_config(config=None): if config: conf = config @@ -38,7 +36,9 @@ def get_config(config=None): base = ['protocols', 'rpki'] rpki = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True) + # Bail out early if configuration tree does not exist if not conf.exists(base): + rpki.update({'deleted' : ''}) return rpki # We have gathered the dict representation of the CLI, but there are default @@ -79,17 +79,22 @@ def verify(rpki): return None def generate(rpki): + if not rpki: + return rpki['new_frr_config'] = render_to_string('frr/rpki.frr.tmpl', rpki) return None def apply(rpki): + bgp_daemon = 'bgpd' + # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - frr_cfg.load_configuration(frr_daemon) - frr_cfg.modify_section('rpki', '') - frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', rpki['new_frr_config']) - frr_cfg.commit_configuration(frr_daemon) + frr_cfg.load_configuration(bgp_daemon) + frr_cfg.modify_section('^rpki', stop_pattern='^exit', remove_stop_mark=True) + if 'new_frr_config' in rpki: + frr_cfg.add_before(frr.default_add_before, rpki['new_frr_config']) + frr_cfg.commit_configuration(bgp_daemon) return None if __name__ == '__main__': diff --git a/src/conf_mode/protocols_static.py b/src/conf_mode/protocols_static.py index f010141e9..c1e427b16 100755 --- a/src/conf_mode/protocols_static.py +++ b/src/conf_mode/protocols_static.py @@ -85,6 +85,8 @@ def verify(static): return None def generate(static): + if not static: + return None static['new_frr_config'] = render_to_string('frr/staticd.frr.tmpl', static) return None @@ -97,24 +99,21 @@ def apply(static): # The route-map used for the FIB (zebra) is part of the zebra daemon frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'^ip protocol static route-map [-a-zA-Z0-9.]+$', '') + frr_cfg.modify_section(r'^ip protocol static route-map [-a-zA-Z0-9.]+', '') frr_cfg.commit_configuration(zebra_daemon) - frr_cfg.load_configuration(static_daemon) if 'vrf' in static: vrf = static['vrf'] - frr_cfg.modify_section(f'^vrf {vrf}$', '') + frr_cfg.modify_section(f'^vrf {vrf}', stop_pattern='^exit', remove_stop_mark=True) else: - frr_cfg.modify_section(r'^ip route .*', '') - frr_cfg.modify_section(r'^ipv6 route .*', '') + frr_cfg.modify_section(r'^ip route .*') + frr_cfg.modify_section(r'^ipv6 route .*') - frr_cfg.add_before(r'(interface .*|line vty)', static['new_frr_config']) + if 'new_frr_config' in static: + frr_cfg.add_before(frr.default_add_before, static['new_frr_config']) frr_cfg.commit_configuration(static_daemon) - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() - return None if __name__ == '__main__': diff --git a/src/conf_mode/tftp_server.py b/src/conf_mode/tftp_server.py index 2409eec1f..ef726670c 100755 --- a/src/conf_mode/tftp_server.py +++ b/src/conf_mode/tftp_server.py @@ -24,6 +24,7 @@ from sys import exit from vyos.config import Config from vyos.configdict import dict_merge +from vyos.configverify import verify_vrf from vyos.template import render from vyos.template import is_ipv4 from vyos.util import call @@ -65,10 +66,11 @@ def verify(tftpd): if 'listen_address' not in tftpd: raise ConfigError('TFTP server listen address must be configured!') - for address in tftpd['listen_address']: + for address, address_config in tftpd['listen_address'].items(): if not is_addr_assigned(address): print(f'WARNING: TFTP server listen address "{address}" not ' \ 'assigned to any interface!') + verify_vrf(address_config) return None @@ -83,7 +85,7 @@ def generate(tftpd): return None idx = 0 - for address in tftpd['listen_address']: + for address, address_config in tftpd['listen_address'].items(): config = deepcopy(tftpd) port = tftpd['port'] if is_ipv4(address): @@ -91,6 +93,9 @@ def generate(tftpd): else: config['listen_address'] = f'[{address}]:{port} -6' + if 'vrf' in address_config: + config['vrf'] = address_config['vrf'] + file = config_file + str(idx) render(file, 'tftp-server/default.tmpl', config) idx = idx + 1 diff --git a/src/conf_mode/vpn_openconnect.py b/src/conf_mode/vpn_openconnect.py index f6db196dc..51ea1f223 100755 --- a/src/conf_mode/vpn_openconnect.py +++ b/src/conf_mode/vpn_openconnect.py @@ -23,9 +23,11 @@ from vyos.pki import wrap_certificate from vyos.pki import wrap_private_key from vyos.template import render from vyos.util import call +from vyos.util import is_systemd_service_running from vyos.xml import defaults from vyos import ConfigError from crypt import crypt, mksalt, METHOD_SHA512 +from time import sleep from vyos import airbag airbag.enable() @@ -172,6 +174,16 @@ def apply(ocserv): os.unlink(file) else: call('systemctl restart ocserv.service') + counter = 0 + while True: + # exit early when service runs + if is_systemd_service_running("ocserv.service"): + break + sleep(0.250) + if counter > 5: + raise ConfigError('openconnect failed to start, check the logs for details') + break + counter += 1 if __name__ == '__main__': diff --git a/src/conf_mode/vrf_vni.py b/src/conf_mode/vrf_vni.py index 50d60f0dc..1a7bd1f09 100755 --- a/src/conf_mode/vrf_vni.py +++ b/src/conf_mode/vrf_vni.py @@ -47,13 +47,11 @@ def apply(vrf): # add configuration to FRR frr_cfg = frr.FRRConfig() frr_cfg.load_configuration(frr_daemon) - frr_cfg.modify_section(f'^vrf .+$', '') - frr_cfg.add_before(r'(interface .*|line vty)', vrf['new_frr_config']) + frr_cfg.modify_section(f'^vrf .+', stop_pattern='^exit-vrf', remove_stop_mark=True) + if 'new_frr_config' in vrf: + frr_cfg.add_before(frr.default_add_before, vrf['new_frr_config']) frr_cfg.commit_configuration(frr_daemon) - # Save configuration to /run/frr/config/frr.conf - frr.save_configuration() - return None if __name__ == '__main__': diff --git a/src/helpers/vyos-check-wwan.py b/src/helpers/vyos-check-wwan.py index c6e6c54b7..2ff9a574f 100755 --- a/src/helpers/vyos-check-wwan.py +++ b/src/helpers/vyos-check-wwan.py @@ -18,7 +18,6 @@ from vyos.configquery import VbashOpRun from vyos.configquery import ConfigTreeQuery from vyos.util import is_wwan_connected -from vyos.util import call conf = ConfigTreeQuery() dict = conf.get_config_dict(['interfaces', 'wwan'], key_mangling=('-', '_'), @@ -30,8 +29,7 @@ for interface, interface_config in dict.items(): # do not restart this interface as it's disabled by the user continue - #op = VbashOpRun() - #op.run(['connect', 'interface', interface]) - call(f'VYOS_TAGNODE_VALUE={interface} /usr/libexec/vyos/conf_mode/interfaces-wwan.py') + op = VbashOpRun() + op.run(['connect', 'interface', interface]) exit(0) diff --git a/src/migration-scripts/ospf/0-to-1 b/src/migration-scripts/ospf/0-to-1 new file mode 100755 index 000000000..678569d9e --- /dev/null +++ b/src/migration-scripts/ospf/0-to-1 @@ -0,0 +1,81 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2021 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# T3753: upgrade to FRR8 and move CLI options to better fit with the new FRR CLI + +from sys import argv +from vyos.configtree import ConfigTree + +def ospf_passive_migration(config, ospf_base): + if config.exists(ospf_base): + if config.exists(ospf_base + ['passive-interface']): + default = False + for interface in config.return_values(ospf_base + ['passive-interface']): + if interface == 'default': + default = True + continue + config.set(ospf_base + ['interface', interface, 'passive']) + + config.delete(ospf_base + ['passive-interface']) + config.set(ospf_base + ['passive-interface'], value='default') + + if config.exists(ospf_base + ['passive-interface-exclude']): + for interface in config.return_values(ospf_base + ['passive-interface-exclude']): + config.set(ospf_base + ['interface', interface, 'passive', 'disable']) + config.delete(ospf_base + ['passive-interface-exclude']) + +if (len(argv) < 1): + print("Must specify file name!") + exit(1) + +file_name = argv[1] + +with open(file_name, 'r') as f: + config_file = f.read() + +config = ConfigTree(config_file) + +ospfv3_base = ['protocols', 'ospfv3'] +if config.exists(ospfv3_base): + area_base = ospfv3_base + ['area'] + if config.exists(area_base): + for area in config.list_nodes(area_base): + if not config.exists(area_base + [area, 'interface']): + continue + + for interface in config.return_values(area_base + [area, 'interface']): + config.set(ospfv3_base + ['interface', interface, 'area'], value=area) + config.set_tag(ospfv3_base + ['interface']) + + config.delete(area_base + [area, 'interface']) + +# Migrate OSPF syntax in default VRF +ospf_base = ['protocols', 'ospf'] +ospf_passive_migration(config, ospf_base) + +vrf_base = ['vrf', 'name'] +if config.exists(vrf_base): + for vrf in config.list_nodes(vrf_base): + vrf_ospf_base = vrf_base + [vrf, 'protocols', 'ospf'] + if config.exists(vrf_ospf_base): + ospf_passive_migration(config, vrf_ospf_base) + +try: + with open(file_name, 'w') as f: + f.write(config.to_string()) +except OSError as e: + print(f'Failed to save the modified config: {e}') + exit(1) diff --git a/src/op_mode/force_root-partition-auto-resize.sh b/src/op_mode/force_root-partition-auto-resize.sh index 4f13e3e03..b39e87560 100755 --- a/src/op_mode/force_root-partition-auto-resize.sh +++ b/src/op_mode/force_root-partition-auto-resize.sh @@ -44,7 +44,13 @@ fi # # Resize the partition and grow the filesystem. # +# "print" and "Fix" directives were added to fix GPT table if it corrupted after virtual drive extension. +# If GPT table is corrupted we'll get Fix/Ignore dialogue after "print" command. +# "Fix" will be the answer for this dialogue. +# If GPT table is fine and no auto-fix dialogue appeared the directive "Fix" simply will print parted utility help info. parted -m ${ROOT_DEV} ---pretend-input-tty > /dev/null 2>&1 <<EOF +print +Fix resizepart ${ROOT_PART_NUM} Yes diff --git a/src/op_mode/format_disk.py b/src/op_mode/format_disk.py index df4486bce..b3ba44e87 100755 --- a/src/op_mode/format_disk.py +++ b/src/op_mode/format_disk.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2019 VyOS maintainers and contributors +# Copyright (C) 2019-2021 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -17,11 +17,10 @@ import argparse import os import re -import sys + from datetime import datetime -from time import sleep -from vyos.util import is_admin, ask_yes_no +from vyos.util import ask_yes_no from vyos.util import call from vyos.util import cmd from vyos.util import DEVNULL @@ -38,16 +37,17 @@ def list_disks(): def is_busy(disk: str): """Check if given disk device is busy by re-reading it's partition table""" - return call(f'sudo blockdev --rereadpt /dev/{disk}', stderr=DEVNULL) != 0 + return call(f'blockdev --rereadpt /dev/{disk}', stderr=DEVNULL) != 0 def backup_partitions(disk: str): """Save sfdisk partitions output to a backup file""" - device_path = '/dev/' + disk - backup_ts = datetime.now().strftime('%Y-%m-%d-%H:%M') - backup_file = '/var/tmp/backup_{}.{}'.format(disk, backup_ts) - cmd(f'sudo /sbin/sfdisk -d {device_path} > {backup_file}') + device_path = f'/dev/{disk}' + backup_ts = datetime.now().strftime('%Y%m%d-%H%M') + backup_file = f'/var/tmp/backup_{disk}.{backup_ts}' + call(f'sfdisk -d {device_path} > {backup_file}') + print(f'Partition table backup saved to {backup_file}') def list_partitions(disk: str): @@ -65,11 +65,11 @@ def list_partitions(disk: str): def delete_partition(disk: str, partition_idx: int): - cmd(f'sudo /sbin/parted /dev/{disk} rm {partition_idx}') + cmd(f'parted /dev/{disk} rm {partition_idx}') def format_disk_like(target: str, proto: str): - cmd(f'sudo /sbin/sfdisk -d /dev/{proto} | sudo /sbin/sfdisk --force /dev/{target}') + cmd(f'sfdisk -d /dev/{proto} | sfdisk --force /dev/{target}') if __name__ == '__main__': @@ -79,10 +79,6 @@ if __name__ == '__main__': group.add_argument('-p', '--proto', type=str, required=True, help='Prototype device to use as reference') args = parser.parse_args() - if not is_admin(): - print('Must be admin or root to format disk') - sys.exit(1) - target_disk = args.target eligible_target_disks = list_disks() @@ -90,54 +86,48 @@ if __name__ == '__main__': eligible_proto_disks = eligible_target_disks.copy() eligible_proto_disks.remove(target_disk) - fmt = { - 'target_disk': target_disk, - 'proto_disk': proto_disk, - } - if proto_disk == target_disk: print('The two disk drives must be different.') - sys.exit(1) + exit(1) - if not os.path.exists('/dev/' + proto_disk): - print('Device /dev/{proto_disk} does not exist'.format_map(fmt)) - sys.exit(1) + if not os.path.exists(f'/dev/{proto_disk}'): + print(f'Device /dev/{proto_disk} does not exist') + exit(1) if not os.path.exists('/dev/' + target_disk): - print('Device /dev/{target_disk} does not exist'.format_map(fmt)) - sys.exit(1) + print(f'Device /dev/{target_disk} does not exist') + exit(1) if target_disk not in eligible_target_disks: - print('Device {target_disk} can not be formatted'.format_map(fmt)) - sys.exit(1) + print(f'Device {target_disk} can not be formatted') + exit(1) if proto_disk not in eligible_proto_disks: - print('Device {proto_disk} can not be used as a prototype for {target_disk}'.format_map(fmt)) - sys.exit(1) + print(f'Device {proto_disk} can not be used as a prototype for {target_disk}') + exit(1) if is_busy(target_disk): - print("Disk device {target_disk} is busy. Can't format it now".format_map(fmt)) - sys.exit(1) + print(f'Disk device {target_disk} is busy, unable to format') + exit(1) - print('This will re-format disk {target_disk} so that it has the same disk\n' - 'partion sizes and offsets as {proto_disk}. This will not copy\n' - 'data from {proto_disk} to {target_disk}. But this will erase all\n' - 'data on {target_disk}.\n'.format_map(fmt)) + print(f'\nThis will re-format disk {target_disk} so that it has the same disk' + f'\npartion sizes and offsets as {proto_disk}. This will not copy' + f'\ndata from {proto_disk} to {target_disk}. But this will erase all' + f'\ndata on {target_disk}.\n') - if not ask_yes_no("Do you wish to proceed?"): - print('OK. Disk drive {target_disk} will not be re-formated'.format_map(fmt)) - sys.exit(0) + if not ask_yes_no('Do you wish to proceed?'): + print(f'Disk drive {target_disk} will not be re-formated') + exit(0) - print('OK. Re-formating disk drive {target_disk}...'.format_map(fmt)) + print(f'Re-formating disk drive {target_disk}...') print('Making backup copy of partitions...') backup_partitions(target_disk) - sleep(1) print('Deleting old partitions...') for p in list_partitions(target_disk): delete_partition(disk=target_disk, partition_idx=p) - print('Creating new partitions on {target_disk} based on {proto_disk}...'.format_map(fmt)) + print(f'Creating new partitions on {target_disk} based on {proto_disk}...') format_disk_like(target=target_disk, proto=proto_disk) - print('Done.') + print('Done!') diff --git a/src/op_mode/lldp_op.py b/src/op_mode/lldp_op.py index 731e71891..b9ebc991a 100755 --- a/src/op_mode/lldp_op.py +++ b/src/op_mode/lldp_op.py @@ -55,6 +55,9 @@ def parse_data(data, interface): if interface is not None and local_if != interface: continue for chassis, c_value in values.get('chassis', {}).items(): + # bail out early if no capabilities found + if 'capability' not in c_value: + continue capabilities = c_value['capability'] if isinstance(capabilities, dict): capabilities = [capabilities] diff --git a/src/op_mode/ppp-server-ctrl.py b/src/op_mode/ppp-server-ctrl.py index 670cdf879..e93963fdd 100755 --- a/src/op_mode/ppp-server-ctrl.py +++ b/src/op_mode/ppp-server-ctrl.py @@ -60,7 +60,7 @@ def main(): output, err = popen(cmd_dict['cmd_base'].format(cmd_dict['vpn_types'][args.proto]) + args.action + ses_pattern, stderr=DEVNULL, decode='utf-8') if not err: try: - print(output) + print(f' {output}') except: sys.exit(0) else: diff --git a/src/op_mode/show_configuration_json.py b/src/op_mode/show_configuration_json.py new file mode 100755 index 000000000..fdece533b --- /dev/null +++ b/src/op_mode/show_configuration_json.py @@ -0,0 +1,36 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2021 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import argparse +import json + +from vyos.configquery import ConfigTreeQuery + + +config = ConfigTreeQuery() +c = config.get_config_dict() + +parser = argparse.ArgumentParser() +parser.add_argument("-p", "--pretty", action="store_true", help="Show pretty configuration in JSON format") + + +if __name__ == '__main__': + args = parser.parse_args() + + if args.pretty: + print(json.dumps(c, indent=4)) + else: + print(json.dumps(c)) diff --git a/src/services/api/graphql/README.graphql b/src/services/api/graphql/README.graphql index c91b70782..a3c30b005 100644 --- a/src/services/api/graphql/README.graphql +++ b/src/services/api/graphql/README.graphql @@ -10,7 +10,7 @@ to run with that address as default router by requesting these 'mutations' in the GraphQL playground: mutation { - createInterfaceEthernet (data: {interface: "eth1", + CreateInterfaceEthernet (data: {interface: "eth1", address: "192.168.0.1/24", description: "BOB"}) { success @@ -22,7 +22,7 @@ mutation { } mutation { - createDhcpServer(data: {sharedNetworkName: "BOB", + CreateDhcpServer(data: {sharedNetworkName: "BOB", subnet: "192.168.0.0/24", defaultRouter: "192.168.0.1", nameServer: "192.168.0.1", @@ -42,8 +42,10 @@ mutation { } } +To save the configuration, use the following mutation: + mutation { - saveConfigFile(data: {fileName: "/config/config.boot"}) { + SaveConfigFile(data: {fileName: "/config/config.boot"}) { success errors data { @@ -52,11 +54,17 @@ mutation { } } -N.B. fileName can be empty (fileName: "") or data can be empty (data: {}) to save to -/config/config.boot; to save to an alternative path, specify fileName. +N.B. fileName can be empty (fileName: "") or data can be empty (data: {}) to +save to /config/config.boot; to save to an alternative path, specify +fileName. + +Similarly, using the same 'endpoint' (meaning the form of the request and +resolver; the actual enpoint for all GraphQL requests is +https://hostname/graphql), one can load an arbitrary config file from a +path. mutation { - loadConfigFile(data: {fileName: "/home/vyos/config.boot"}) { + LoadConfigFile(data: {fileName: "/home/vyos/config.boot"}) { success errors data { @@ -65,6 +73,20 @@ mutation { } } +Op-mode 'show' commands may be requested by path, e.g.: + +mutation { + Show (data: {path: ["interfaces", "ethernet", "detail"]}) { + success + errors + data { + result + } + } +} + +N.B. to see the output the 'data' field 'result' must be present in the +request. The GraphQL playground will be found at: @@ -81,22 +103,30 @@ What's here: services ├── api │ └── graphql +│ ├── bindings.py │ ├── graphql │ │ ├── directives.py │ │ ├── __init__.py │ │ ├── mutations.py │ │ └── schema +│ │ ├── config_file.graphql │ │ ├── dhcp_server.graphql +│ │ ├── firewall_group.graphql │ │ ├── interface_ethernet.graphql -│ │ └── schema.graphql +│ │ ├── schema.graphql +│ │ ├── show_config.graphql +│ │ └── show.graphql +│ ├── README.graphql │ ├── recipes -│ │ ├── dhcp_server.py │ │ ├── __init__.py -│ │ ├── interface_ethernet.py -│ │ ├── recipe.py +│ │ ├── remove_firewall_address_group_members.py +│ │ ├── session.py │ │ └── templates -│ │ ├── dhcp_server.tmpl -│ │ └── interface_ethernet.tmpl +│ │ ├── create_dhcp_server.tmpl +│ │ ├── create_firewall_address_group.tmpl +│ │ ├── create_interface_ethernet.tmpl +│ │ ├── remove_firewall_address_group_members.tmpl +│ │ └── update_firewall_address_group_members.tmpl │ └── state.py ├── vyos-configd ├── vyos-hostsd @@ -114,13 +144,14 @@ the Ur-data; the GraphQL schema is produced from those files, located in Resolvers for the schema Mutation fields are dynamically generated using a 'directive' added to the respective schema field. The directive, -'@generate', is handled by the class 'DataDirective' in -'api/graphql/graphql/directives.py', which calls the 'make_resolver' function in -'api/graphql/graphql/mutations.py'; the produced resolver calls the appropriate -wrapper in 'api/graphql/recipes', with base class doing the (overridable) -configuration steps of calling all defined 'set'/'delete' commands. - -Integrating the above with vyos-http-api-server is ~10 lines of code. +'@configure', is handled by the class 'ConfigureDirective' in +'api/graphql/graphql/directives.py', which calls the +'make_configure_resolver' function in 'api/graphql/graphql/mutations.py'; +the produced resolver calls the appropriate wrapper in +'api/graphql/recipes', with base class doing the (overridable) configuration +steps of calling all defined 'set'/'delete' commands. + +Integrating the above with vyos-http-api-server is 4 lines of code. What needs to be done: diff --git a/src/services/api/graphql/bindings.py b/src/services/api/graphql/bindings.py index c123f68d8..1fbe13d0c 100644 --- a/src/services/api/graphql/bindings.py +++ b/src/services/api/graphql/bindings.py @@ -1,7 +1,6 @@ import vyos.defaults from . graphql.mutations import mutation -from . graphql.directives import DataDirective, ConfigFileDirective - +from . graphql.directives import directives_dict from ariadne import make_executable_schema, load_schema_from_path, snake_case_fallback_resolvers def generate_schema(): @@ -9,6 +8,6 @@ def generate_schema(): type_defs = load_schema_from_path(api_schema_dir) - schema = make_executable_schema(type_defs, mutation, snake_case_fallback_resolvers, directives={"generate": DataDirective, "configfile": ConfigFileDirective}) + schema = make_executable_schema(type_defs, mutation, snake_case_fallback_resolvers, directives=directives_dict) return schema diff --git a/src/services/api/graphql/graphql/directives.py b/src/services/api/graphql/graphql/directives.py index 85d514de4..10bc522db 100644 --- a/src/services/api/graphql/graphql/directives.py +++ b/src/services/api/graphql/graphql/directives.py @@ -1,12 +1,11 @@ from ariadne import SchemaDirectiveVisitor, ObjectType -from . mutations import make_resolver, make_config_file_resolver +from . mutations import * -class DataDirective(SchemaDirectiveVisitor): - """ - Class providing implementation of 'generate' directive in schema. +def non(arg): + pass - """ - def visit_field_definition(self, field, object_type): +class VyosDirective(SchemaDirectiveVisitor): + def visit_field_definition(self, field, object_type, make_resolver=non): name = f'{field.type}' # field.type contains the return value of the mutation; trim value # to produce canonical name @@ -16,17 +15,49 @@ class DataDirective(SchemaDirectiveVisitor): field.resolve = func return field -class ConfigFileDirective(SchemaDirectiveVisitor): + +class ConfigureDirective(VyosDirective): + """ + Class providing implementation of 'configure' directive in schema. + """ + def visit_field_definition(self, field, object_type): + super().visit_field_definition(field, object_type, + make_resolver=make_configure_resolver) + +class ShowConfigDirective(VyosDirective): + """ + Class providing implementation of 'show' directive in schema. + """ + def visit_field_definition(self, field, object_type): + super().visit_field_definition(field, object_type, + make_resolver=make_show_config_resolver) + +class ConfigFileDirective(VyosDirective): """ Class providing implementation of 'configfile' directive in schema. + """ + def visit_field_definition(self, field, object_type): + super().visit_field_definition(field, object_type, + make_resolver=make_config_file_resolver) +class ShowDirective(VyosDirective): + """ + Class providing implementation of 'show' directive in schema. """ def visit_field_definition(self, field, object_type): - name = f'{field.type}' - # field.type contains the return value of the mutation; trim value - # to produce canonical name - name = name.replace('Result', '', 1) + super().visit_field_definition(field, object_type, + make_resolver=make_show_resolver) - func = make_config_file_resolver(name) - field.resolve = func - return field +class ImageDirective(VyosDirective): + """ + Class providing implementation of 'image' directive in schema. + """ + def visit_field_definition(self, field, object_type): + super().visit_field_definition(field, object_type, + make_resolver=make_image_resolver) + +directives_dict = {"configure": ConfigureDirective, + "showconfig": ShowConfigDirective, + "configfile": ConfigFileDirective, + "show": ShowDirective, + "image": ImageDirective} diff --git a/src/services/api/graphql/graphql/mutations.py b/src/services/api/graphql/graphql/mutations.py index 2eb0a0b4a..8e5aab56d 100644 --- a/src/services/api/graphql/graphql/mutations.py +++ b/src/services/api/graphql/graphql/mutations.py @@ -6,10 +6,11 @@ from graphql import GraphQLResolveInfo from makefun import with_signature from .. import state +from api.graphql.recipes.session import Session mutation = ObjectType("Mutation") -def make_resolver(mutation_name): +def make_resolver(mutation_name, class_name, session_func): """Dynamically generate a resolver for the mutation named in the schema by 'mutation_name'. @@ -19,11 +20,11 @@ def make_resolver(mutation_name): functools.wraps. :raise Exception: - encapsulating ConfigErrors, or internal errors + raising ConfigErrors, or internal errors """ - class_name = mutation_name.replace('create', '', 1).replace('delete', '', 1) + func_base_name = convert_camel_case_to_snake(class_name) - resolver_name = f'resolve_create_{func_base_name}' + resolver_name = f'resolve_{func_base_name}' func_sig = '(obj: Any, info: GraphQLResolveInfo, data: Dict)' @mutation.field(mutation_name) @@ -40,10 +41,18 @@ def make_resolver(mutation_name): data = kwargs['data'] session = state.settings['app'].state.vyos_session - mod = import_module(f'api.graphql.recipes.{func_base_name}') - klass = getattr(mod, class_name) + # one may override the session functions with a local subclass + try: + mod = import_module(f'api.graphql.recipes.{func_base_name}') + klass = getattr(mod, class_name) + except ImportError: + # otherwise, dynamically generate subclass to invoke subclass + # name based templates + klass = type(class_name, (Session,), {}) k = klass(session, data) - k.configure() + method = getattr(k, session_func) + result = method() + data['result'] = result return { "success": True, @@ -57,53 +66,34 @@ def make_resolver(mutation_name): return func_impl -def make_config_file_resolver(mutation_name): - op = '' - if 'save' in mutation_name: - op = 'save' - elif 'load' in mutation_name: - op = 'load' +def make_configure_resolver(mutation_name): + class_name = mutation_name + return make_resolver(mutation_name, class_name, 'configure') - class_name = mutation_name.replace('save', '', 1).replace('load', '', 1) - func_base_name = convert_camel_case_to_snake(class_name) - resolver_name = f'resolve_{func_base_name}' - func_sig = '(obj: Any, info: GraphQLResolveInfo, data: Dict)' +def make_show_config_resolver(mutation_name): + class_name = mutation_name + return make_resolver(mutation_name, class_name, 'show_config') - @mutation.field(mutation_name) - @convert_kwargs_to_snake_case - @with_signature(func_sig, func_name=resolver_name) - async def func_impl(*args, **kwargs): - try: - if 'data' not in kwargs: - return { - "success": False, - "errors": ['missing data'] - } - - data = kwargs['data'] - session = state.settings['app'].state.vyos_session - - mod = import_module(f'api.graphql.recipes.{func_base_name}') - klass = getattr(mod, class_name) - k = klass(session, data) - if op == 'save': - k.save() - elif op == 'load': - k.load() - else: - return { - "success": False, - "errors": ["Input must be saveConfigFile | loadConfigFile"] - } - - return { - "success": True, - "data": data - } - except Exception as error: - return { - "success": False, - "errors": [str(error)] - } - - return func_impl +def make_config_file_resolver(mutation_name): + if 'Save' in mutation_name: + class_name = mutation_name.replace('Save', '', 1) + return make_resolver(mutation_name, class_name, 'save') + elif 'Load' in mutation_name: + class_name = mutation_name.replace('Load', '', 1) + return make_resolver(mutation_name, class_name, 'load') + else: + raise Exception + +def make_show_resolver(mutation_name): + class_name = mutation_name + return make_resolver(mutation_name, class_name, 'show') + +def make_image_resolver(mutation_name): + if 'Add' in mutation_name: + class_name = mutation_name.replace('Add', '', 1) + return make_resolver(mutation_name, class_name, 'add') + elif 'Delete' in mutation_name: + class_name = mutation_name.replace('Delete', '', 1) + return make_resolver(mutation_name, class_name, 'delete') + else: + raise Exception diff --git a/src/services/api/graphql/graphql/schema/config_file.graphql b/src/services/api/graphql/graphql/schema/config_file.graphql index 3096cf743..31ab26b9e 100644 --- a/src/services/api/graphql/graphql/schema/config_file.graphql +++ b/src/services/api/graphql/graphql/schema/config_file.graphql @@ -1,27 +1,27 @@ -input saveConfigFileInput { +input SaveConfigFileInput { fileName: String } -type saveConfigFile { +type SaveConfigFile { fileName: String } -type saveConfigFileResult { - data: saveConfigFile +type SaveConfigFileResult { + data: SaveConfigFile success: Boolean! errors: [String] } -input loadConfigFileInput { +input LoadConfigFileInput { fileName: String! } -type loadConfigFile { +type LoadConfigFile { fileName: String! } -type loadConfigFileResult { - data: loadConfigFile +type LoadConfigFileResult { + data: LoadConfigFile success: Boolean! errors: [String] } diff --git a/src/services/api/graphql/graphql/schema/dhcp_server.graphql b/src/services/api/graphql/graphql/schema/dhcp_server.graphql index 9f741a0a5..25f091bfa 100644 --- a/src/services/api/graphql/graphql/schema/dhcp_server.graphql +++ b/src/services/api/graphql/graphql/schema/dhcp_server.graphql @@ -1,4 +1,4 @@ -input dhcpServerConfigInput { +input DhcpServerConfigInput { sharedNetworkName: String subnet: String defaultRouter: String @@ -13,7 +13,7 @@ input dhcpServerConfigInput { dnsForwardingListenAddress: String } -type dhcpServerConfig { +type DhcpServerConfig { sharedNetworkName: String subnet: String defaultRouter: String @@ -28,8 +28,8 @@ type dhcpServerConfig { dnsForwardingListenAddress: String } -type createDhcpServerResult { - data: dhcpServerConfig +type CreateDhcpServerResult { + data: DhcpServerConfig success: Boolean! errors: [String] } diff --git a/src/services/api/graphql/graphql/schema/firewall_group.graphql b/src/services/api/graphql/graphql/schema/firewall_group.graphql new file mode 100644 index 000000000..efe7de632 --- /dev/null +++ b/src/services/api/graphql/graphql/schema/firewall_group.graphql @@ -0,0 +1,47 @@ +input CreateFirewallAddressGroupInput { + name: String! + address: [String] +} + +type CreateFirewallAddressGroup { + name: String! + address: [String] +} + +type CreateFirewallAddressGroupResult { + data: CreateFirewallAddressGroup + success: Boolean! + errors: [String] +} + +input UpdateFirewallAddressGroupMembersInput { + name: String! + address: [String!]! +} + +type UpdateFirewallAddressGroupMembers { + name: String! + address: [String!]! +} + +type UpdateFirewallAddressGroupMembersResult { + data: UpdateFirewallAddressGroupMembers + success: Boolean! + errors: [String] +} + +input RemoveFirewallAddressGroupMembersInput { + name: String! + address: [String!]! +} + +type RemoveFirewallAddressGroupMembers { + name: String! + address: [String!]! +} + +type RemoveFirewallAddressGroupMembersResult { + data: RemoveFirewallAddressGroupMembers + success: Boolean! + errors: [String] +} diff --git a/src/services/api/graphql/graphql/schema/image.graphql b/src/services/api/graphql/graphql/schema/image.graphql new file mode 100644 index 000000000..7d1b4f9d0 --- /dev/null +++ b/src/services/api/graphql/graphql/schema/image.graphql @@ -0,0 +1,29 @@ +input AddSystemImageInput { + location: String! +} + +type AddSystemImage { + location: String + result: String +} + +type AddSystemImageResult { + data: AddSystemImage + success: Boolean! + errors: [String] +} + +input DeleteSystemImageInput { + name: String! +} + +type DeleteSystemImage { + name: String + result: String +} + +type DeleteSystemImageResult { + data: DeleteSystemImage + success: Boolean! + errors: [String] +} diff --git a/src/services/api/graphql/graphql/schema/interface_ethernet.graphql b/src/services/api/graphql/graphql/schema/interface_ethernet.graphql index fdcf97bad..32438b315 100644 --- a/src/services/api/graphql/graphql/schema/interface_ethernet.graphql +++ b/src/services/api/graphql/graphql/schema/interface_ethernet.graphql @@ -1,18 +1,18 @@ -input interfaceEthernetConfigInput { +input InterfaceEthernetConfigInput { interface: String address: String replace: Boolean = true description: String } -type interfaceEthernetConfig { +type InterfaceEthernetConfig { interface: String address: String description: String } -type createInterfaceEthernetResult { - data: interfaceEthernetConfig +type CreateInterfaceEthernetResult { + data: InterfaceEthernetConfig success: Boolean! errors: [String] } diff --git a/src/services/api/graphql/graphql/schema/schema.graphql b/src/services/api/graphql/graphql/schema/schema.graphql index 70fe0d726..c6899bee6 100644 --- a/src/services/api/graphql/graphql/schema/schema.graphql +++ b/src/services/api/graphql/graphql/schema/schema.graphql @@ -7,12 +7,22 @@ type Query { _dummy: String } -directive @generate on FIELD_DEFINITION +directive @configure on FIELD_DEFINITION directive @configfile on FIELD_DEFINITION +directive @show on FIELD_DEFINITION +directive @showconfig on FIELD_DEFINITION +directive @image on FIELD_DEFINITION type Mutation { - createDhcpServer(data: dhcpServerConfigInput) : createDhcpServerResult @generate - createInterfaceEthernet(data: interfaceEthernetConfigInput) : createInterfaceEthernetResult @generate - saveConfigFile(data: saveConfigFileInput) : saveConfigFileResult @configfile - loadConfigFile(data: loadConfigFileInput) : loadConfigFileResult @configfile + CreateDhcpServer(data: DhcpServerConfigInput) : CreateDhcpServerResult @configure + CreateInterfaceEthernet(data: InterfaceEthernetConfigInput) : CreateInterfaceEthernetResult @configure + CreateFirewallAddressGroup(data: CreateFirewallAddressGroupInput) : CreateFirewallAddressGroupResult @configure + UpdateFirewallAddressGroupMembers(data: UpdateFirewallAddressGroupMembersInput) : UpdateFirewallAddressGroupMembersResult @configure + RemoveFirewallAddressGroupMembers(data: RemoveFirewallAddressGroupMembersInput) : RemoveFirewallAddressGroupMembersResult @configure + SaveConfigFile(data: SaveConfigFileInput) : SaveConfigFileResult @configfile + LoadConfigFile(data: LoadConfigFileInput) : LoadConfigFileResult @configfile + Show(data: ShowInput) : ShowResult @show + ShowConfig(data: ShowConfigInput) : ShowConfigResult @showconfig + AddSystemImage(data: AddSystemImageInput) : AddSystemImageResult @image + DeleteSystemImage(data: DeleteSystemImageInput) : DeleteSystemImageResult @image } diff --git a/src/services/api/graphql/graphql/schema/show.graphql b/src/services/api/graphql/graphql/schema/show.graphql new file mode 100644 index 000000000..c7709e48b --- /dev/null +++ b/src/services/api/graphql/graphql/schema/show.graphql @@ -0,0 +1,14 @@ +input ShowInput { + path: [String!]! +} + +type Show { + path: [String] + result: String +} + +type ShowResult { + data: Show + success: Boolean! + errors: [String] +} diff --git a/src/services/api/graphql/graphql/schema/show_config.graphql b/src/services/api/graphql/graphql/schema/show_config.graphql new file mode 100644 index 000000000..34afd2aa9 --- /dev/null +++ b/src/services/api/graphql/graphql/schema/show_config.graphql @@ -0,0 +1,21 @@ +""" +Use 'scalar Generic' for show config output, to avoid attempts to +JSON-serialize in case of JSON output. +""" +scalar Generic + +input ShowConfigInput { + path: [String!]! + configFormat: String +} + +type ShowConfig { + path: [String] + result: Generic +} + +type ShowConfigResult { + data: ShowConfig + success: Boolean! + errors: [String] +} diff --git a/src/services/api/graphql/recipes/config_file.py b/src/services/api/graphql/recipes/config_file.py deleted file mode 100644 index 850e5326e..000000000 --- a/src/services/api/graphql/recipes/config_file.py +++ /dev/null @@ -1,16 +0,0 @@ - -from . recipe import Recipe - -class ConfigFile(Recipe): - def __init__(self, session, command_file): - super().__init__(session, command_file) - - # Define any custom processing of parameters here by overriding - # save/load: - # - # def save(self): - # self.data = transform_data(self.data) - # super().save() - # def load(self): - # self.data = transform_data(self.data) - # super().load() diff --git a/src/services/api/graphql/recipes/dhcp_server.py b/src/services/api/graphql/recipes/dhcp_server.py deleted file mode 100644 index 3edb3028e..000000000 --- a/src/services/api/graphql/recipes/dhcp_server.py +++ /dev/null @@ -1,13 +0,0 @@ - -from . recipe import Recipe - -class DhcpServer(Recipe): - def __init__(self, session, command_file): - super().__init__(session, command_file) - - # Define any custom processing of parameters here by overriding - # configure: - # - # def configure(self): - # self.data = transform_data(self.data) - # super().configure() diff --git a/src/services/api/graphql/recipes/interface_ethernet.py b/src/services/api/graphql/recipes/interface_ethernet.py deleted file mode 100644 index f88f5924f..000000000 --- a/src/services/api/graphql/recipes/interface_ethernet.py +++ /dev/null @@ -1,13 +0,0 @@ - -from . recipe import Recipe - -class InterfaceEthernet(Recipe): - def __init__(self, session, command_file): - super().__init__(session, command_file) - - # Define any custom processing of parameters here by overriding - # configure: - # - # def configure(self): - # self.data = transform_data(self.data) - # super().configure() diff --git a/src/services/api/graphql/recipes/recipe.py b/src/services/api/graphql/recipes/recipe.py deleted file mode 100644 index 91d8bd67a..000000000 --- a/src/services/api/graphql/recipes/recipe.py +++ /dev/null @@ -1,68 +0,0 @@ -from ariadne import convert_camel_case_to_snake -import vyos.defaults -from vyos.template import render - -class Recipe(object): - def __init__(self, session, data): - self._session = session - self.data = data - self._name = convert_camel_case_to_snake(type(self).__name__) - - @property - def data(self): - return self.__data - - @data.setter - def data(self, data): - if isinstance(data, dict): - self.__data = data - else: - raise ValueError("data must be of type dict") - - def configure(self): - session = self._session - data = self.data - func_base_name = self._name - - tmpl_file = f'{func_base_name}.tmpl' - cmd_file = f'/tmp/{func_base_name}.cmds' - tmpl_dir = vyos.defaults.directories['api_templates'] - - try: - render(cmd_file, tmpl_file, data, location=tmpl_dir) - commands = [] - with open(cmd_file) as f: - lines = f.readlines() - for line in lines: - commands.append(line.split()) - for cmd in commands: - if cmd[0] == 'set': - session.set(cmd[1:]) - elif cmd[0] == 'delete': - session.delete(cmd[1:]) - else: - raise ValueError('Operation must be "set" or "delete"') - session.commit() - except Exception as error: - raise error - - def save(self): - session = self._session - data = self.data - if 'file_name' not in data or not data['file_name']: - data['file_name'] = '/config/config.boot' - - try: - session.save_config(data['file_name']) - except Exception as error: - raise error - - def load(self): - session = self._session - data = self.data - - try: - session.load_config(data['file_name']) - session.commit() - except Exception as error: - raise error diff --git a/src/services/api/graphql/recipes/remove_firewall_address_group_members.py b/src/services/api/graphql/recipes/remove_firewall_address_group_members.py new file mode 100644 index 000000000..cde30c27a --- /dev/null +++ b/src/services/api/graphql/recipes/remove_firewall_address_group_members.py @@ -0,0 +1,21 @@ + +from . session import Session + +class RemoveFirewallAddressGroupMembers(Session): + def __init__(self, session, data): + super().__init__(session, data) + + # Define any custom processing of parameters here by overriding + # configure: + # + # def configure(self): + # self._data = transform_data(self._data) + # super().configure() + # self.clean_up() + + def configure(self): + super().configure() + + group_name = self._data['name'] + path = ['firewall', 'group', 'address-group', group_name] + self.delete_path_if_childless(path) diff --git a/src/services/api/graphql/recipes/session.py b/src/services/api/graphql/recipes/session.py new file mode 100644 index 000000000..5ece78ee6 --- /dev/null +++ b/src/services/api/graphql/recipes/session.py @@ -0,0 +1,123 @@ +import json + +from ariadne import convert_camel_case_to_snake + +import vyos.defaults +from vyos.config import Config +from vyos.configtree import ConfigTree +from vyos.template import render + +class Session: + """ + Wrapper for calling configsession functions based on GraphQL requests. + Non-nullable fields in the respective schema allow avoiding a key check + in 'data'. + """ + def __init__(self, session, data): + self._session = session + self._data = data + self._name = convert_camel_case_to_snake(type(self).__name__) + + def configure(self): + session = self._session + data = self._data + func_base_name = self._name + + tmpl_file = f'{func_base_name}.tmpl' + cmd_file = f'/tmp/{func_base_name}.cmds' + tmpl_dir = vyos.defaults.directories['api_templates'] + + try: + render(cmd_file, tmpl_file, data, location=tmpl_dir) + commands = [] + with open(cmd_file) as f: + lines = f.readlines() + for line in lines: + commands.append(line.split()) + for cmd in commands: + if cmd[0] == 'set': + session.set(cmd[1:]) + elif cmd[0] == 'delete': + session.delete(cmd[1:]) + else: + raise ValueError('Operation must be "set" or "delete"') + session.commit() + except Exception as error: + raise error + + def delete_path_if_childless(self, path): + session = self._session + config = Config(session.get_session_env()) + if not config.list_nodes(path): + session.delete(path) + session.commit() + + def show_config(self): + session = self._session + data = self._data + out = '' + + try: + out = session.show_config(data['path']) + if data.get('config_format', '') == 'json': + config_tree = vyos.configtree.ConfigTree(out) + out = json.loads(config_tree.to_json()) + except Exception as error: + raise error + + return out + + def save(self): + session = self._session + data = self._data + if 'file_name' not in data or not data['file_name']: + data['file_name'] = '/config/config.boot' + + try: + session.save_config(data['file_name']) + except Exception as error: + raise error + + def load(self): + session = self._session + data = self._data + + try: + session.load_config(data['file_name']) + session.commit() + except Exception as error: + raise error + + def show(self): + session = self._session + data = self._data + out = '' + + try: + out = session.show(data['path']) + except Exception as error: + raise error + + return out + + def add(self): + session = self._session + data = self._data + + try: + res = session.install_image(data['location']) + except Exception as error: + raise error + + return res + + def delete(self): + session = self._session + data = self._data + + try: + res = session.remove_image(data['name']) + except Exception as error: + raise error + + return res diff --git a/src/services/api/graphql/recipes/templates/dhcp_server.tmpl b/src/services/api/graphql/recipes/templates/create_dhcp_server.tmpl index 70de43183..70de43183 100644 --- a/src/services/api/graphql/recipes/templates/dhcp_server.tmpl +++ b/src/services/api/graphql/recipes/templates/create_dhcp_server.tmpl diff --git a/src/services/api/graphql/recipes/templates/create_firewall_address_group.tmpl b/src/services/api/graphql/recipes/templates/create_firewall_address_group.tmpl new file mode 100644 index 000000000..a890d0086 --- /dev/null +++ b/src/services/api/graphql/recipes/templates/create_firewall_address_group.tmpl @@ -0,0 +1,4 @@ +set firewall group address-group {{ name }} +{% for add in address %} +set firewall group address-group {{ name }} address {{ add }} +{% endfor %} diff --git a/src/services/api/graphql/recipes/templates/interface_ethernet.tmpl b/src/services/api/graphql/recipes/templates/create_interface_ethernet.tmpl index d9d7ed691..d9d7ed691 100644 --- a/src/services/api/graphql/recipes/templates/interface_ethernet.tmpl +++ b/src/services/api/graphql/recipes/templates/create_interface_ethernet.tmpl diff --git a/src/services/api/graphql/recipes/templates/remove_firewall_address_group_members.tmpl b/src/services/api/graphql/recipes/templates/remove_firewall_address_group_members.tmpl new file mode 100644 index 000000000..458f3e5fc --- /dev/null +++ b/src/services/api/graphql/recipes/templates/remove_firewall_address_group_members.tmpl @@ -0,0 +1,3 @@ +{% for add in address %} +delete firewall group address-group {{ name }} address {{ add }} +{% endfor %} diff --git a/src/services/api/graphql/recipes/templates/update_firewall_address_group_members.tmpl b/src/services/api/graphql/recipes/templates/update_firewall_address_group_members.tmpl new file mode 100644 index 000000000..f56c61231 --- /dev/null +++ b/src/services/api/graphql/recipes/templates/update_firewall_address_group_members.tmpl @@ -0,0 +1,3 @@ +{% for add in address %} +set firewall group address-group {{ name }} address {{ add }} +{% endfor %} diff --git a/src/system/keepalived-fifo.py b/src/system/keepalived-fifo.py index 1fba0d75b..b1fe7e43f 100755 --- a/src/system/keepalived-fifo.py +++ b/src/system/keepalived-fifo.py @@ -29,6 +29,7 @@ from logging.handlers import SysLogHandler from vyos.ifconfig.vrrp import VRRP from vyos.configquery import ConfigTreeQuery from vyos.util import cmd +from vyos.util import dict_search # configure logging logger = logging.getLogger(__name__) @@ -69,22 +70,10 @@ class KeepalivedFifo: raise ValueError() # Read VRRP configuration directly from CLI - vrrp_config_dict = conf.get_config_dict(base, key_mangling=('-', '_'), - get_first_key=True) - self.vrrp_config = {'vrrp_groups': {}, 'sync_groups': {}} - for key in ['group', 'sync_group']: - if key not in vrrp_config_dict: - continue - for group, group_config in vrrp_config_dict[key].items(): - if 'transition_script' not in group_config: - continue - self.vrrp_config['vrrp_groups'][group] = { - 'STOP': group_config['transition_script'].get('stop'), - 'FAULT': group_config['transition_script'].get('fault'), - 'BACKUP': group_config['transition_script'].get('backup'), - 'MASTER': group_config['transition_script'].get('master'), - } - logger.info(f'Loaded configuration: {self.vrrp_config}') + self.vrrp_config_dict = conf.get_config_dict(base, + key_mangling=('-', '_'), get_first_key=True) + + logger.debug(f'Loaded configuration: {self.vrrp_config_dict}') except Exception as err: logger.error(f'Unable to load configuration: {err}') @@ -129,20 +118,17 @@ class KeepalivedFifo: if os.path.exists(mdns_running_file): cmd(mdns_update_command) - if n_name in self.vrrp_config['vrrp_groups'] and n_state in self.vrrp_config['vrrp_groups'][n_name]: - n_script = self.vrrp_config['vrrp_groups'][n_name].get(n_state) - if n_script: - self._run_command(n_script) + tmp = dict_search(f'group.{n_name}.transition_script.{n_state.lower()}', self.vrrp_config_dict) + if tmp != None: + self._run_command(tmp) # check and run commands for VRRP sync groups - # currently, this is not available in VyOS CLI - if n_type == 'GROUP': + elif n_type == 'GROUP': if os.path.exists(mdns_running_file): cmd(mdns_update_command) - if n_name in self.vrrp_config['sync_groups'] and n_state in self.vrrp_config['sync_groups'][n_name]: - n_script = self.vrrp_config['sync_groups'][n_name].get(n_state) - if n_script: - self._run_command(n_script) + tmp = dict_search(f'sync_group.{n_name}.transition_script.{n_state.lower()}', self.vrrp_config_dict) + if tmp != None: + self._run_command(tmp) # mark task in queue as done self.message_queue.task_done() except Exception as err: diff --git a/src/systemd/tftpd@.service b/src/systemd/tftpd@.service index 266bc0962..a674bf598 100644 --- a/src/systemd/tftpd@.service +++ b/src/systemd/tftpd@.service @@ -7,7 +7,7 @@ RequiresMountsFor=/run Type=forking #NotifyAccess=main EnvironmentFile=-/etc/default/tftpd%I -ExecStart=/usr/sbin/in.tftpd "$DAEMON_ARGS" +ExecStart=/bin/sh -c "${VRF_ARGS} /usr/sbin/in.tftpd ${DAEMON_ARGS}" Restart=on-failure [Install] diff --git a/src/systemd/vyos-http-api.service b/src/systemd/vyos-http-api.service index ba5df5984..55370b356 100644 --- a/src/systemd/vyos-http-api.service +++ b/src/systemd/vyos-http-api.service @@ -1,10 +1,9 @@ [Unit] Description=VyOS HTTP API service -After=auditd.service systemd-user-sessions.service time-sync.target vyos-router.service +After=vyos-router.service Requires=vyos-router.service [Service] -ExecStartPre=/usr/libexec/vyos/init/vyos-config ExecStart=/usr/libexec/vyos/services/vyos-http-api-server Type=idle @@ -18,6 +17,5 @@ User=root Group=vyattacfg [Install] -# Installing in a earlier target leaves ExecStartPre waiting -WantedBy=getty.target +WantedBy=vyos.target diff --git a/src/utils/vyos-hostsd-client b/src/utils/vyos-hostsd-client index d4d38315a..a0515951a 100755 --- a/src/utils/vyos-hostsd-client +++ b/src/utils/vyos-hostsd-client @@ -129,7 +129,8 @@ try: params = h.split(",") if len(params) < 2: raise ValueError("Malformed host entry") - entry['address'] = params[1] + # Address needs to be a list because of changes made in T2683 + entry['address'] = [params[1]] entry['aliases'] = params[2:] data[params[0]] = entry client.add_hosts({args.tag: data}) diff --git a/src/validators/bgp-route-target b/src/validators/bgp-rd-rt index e7e4d403f..b2b69c9be 100755 --- a/src/validators/bgp-route-target +++ b/src/validators/bgp-rd-rt @@ -19,29 +19,37 @@ from vyos.template import is_ipv4 parser = ArgumentParser() group = parser.add_mutually_exclusive_group() -group.add_argument('--single', action='store', help='Validate and allow only one route-target') -group.add_argument('--multi', action='store', help='Validate multiple, whitespace separated route-targets') +group.add_argument('--route-distinguisher', action='store', help='Validate BGP route distinguisher') +group.add_argument('--route-target', action='store', help='Validate one BGP route-target') +group.add_argument('--route-target-multi', action='store', help='Validate multiple, whitespace separated BGP route-targets') args = parser.parse_args() -def is_valid_rt(rt): - # every route target needs to have a colon and must consists of two parts +def is_valid(rt): + """ Verify BGP RD/RT - both can be verified using the same logic """ + # every RD/RT (route distinguisher/route target) needs to have a colon and + # must consists of two parts value = rt.split(':') if len(value) != 2: return False - # A route target must either be only numbers, or the first part must be an - # IPv4 address + + # An RD/RT must either be only numbers, or the first part must be an IPv4 + # address if (is_ipv4(value[0]) or value[0].isdigit()) and value[1].isdigit(): return True return False if __name__ == '__main__': - if args.single: - if not is_valid_rt(args.single): + if args.route_distinguisher: + if not is_valid(args.route_distinguisher): + exit(1) + + elif args.route_target: + if not is_valid(args.route_target): exit(1) - elif args.multi: - for rt in args.multi.split(' '): - if not is_valid_rt(rt): + elif args.route_target_multi: + for rt in args.route_target_multi.split(' '): + if not is_valid(rt): exit(1) else: diff --git a/src/validators/script b/src/validators/script index 1d8a27e5c..4ffdeb2a0 100755 --- a/src/validators/script +++ b/src/validators/script @@ -36,7 +36,7 @@ if __name__ == '__main__': # File outside the config dir is just a warning if not vyos.util.file_is_persistent(script): - sys.exit( - f'Warning: file {path} is outside the / config directory\n' + sys.exit(0)( + f'Warning: file {script} is outside the "/config" directory\n' 'It will not be automatically migrated to a new image on system update' ) |