Age | Commit message (Collapse) | Author |
|
(cherry picked from commit d20dd7a0e6af08a80c7c911e7b151f28e4666173)
|
|
(cherry picked from commit c2a1c071e7d0a9ca754d7f5016eed7db188b3d1a)
|
|
(cherry picked from commit 550cea8e88f11564abb4691354ecbac22d146a29)
|
|
(cherry picked from commit 556e03922f78f8e258c6d6630ad47569be376e11)
|
|
(cherry picked from commit 80fe3ef4d49f6ee277d52ef5847f011e5775e7fb)
|
|
(cherry picked from commit c12320f2f2bf511de82658b81e9d2ddbcfb1331a)
|
|
(cherry picked from commit 5d068442cf7b1863724c83168176ce2940a023fe)
|
|
|
|
|
|
|
|
(cherry picked from commit b4fdcebebecd8d8952211b78bce26d53fd29edb3)
|
|
(cherry picked from commit fd9032fb7bfc86d4e8901e348bc0afdc83e07413)
|
|
Set default TTL value for tunnels from 0 to 64
There are a lot of situation when default value 0 (inherit)
not work properly when you have routing configuration for OSPF
or BGP over the tunnels. To fix it you need explicit set TTL
value other then 0. Or hardcode another value as default.
(cherry picked from commit b4db37507635bf95161bea32b18736fc0732a9e6)
|
|
flow-accounting: T3132: fix egress iptables chain
|
|
|
|
(cherry picked from commit 3e6e4a1738dc2bcf173c6e450ad4d43dda54f283)
|
|
... this is done for easier readability of the commands
(cherry picked from commit f357cf58f7bd1892f85bb26003c62b1d44753e0a)
|
|
Added by commit 8ff36fa268f ("smoketest: vif: T3570: fix vlan interface MTU test
for pseudo-ethernet interfaces"), but it used the new API available through
VyOSUnitTestSHIM.
This has ben fixed to use the old API.
|
|
set service dhcp-server shared-network-name NET01 authoritative
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 default-router '10.0.0.1'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 lease '86400'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG01 start '10.0.0.60'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG01 stop '10.0.0.70'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG02 start '10.0.0.55'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG02 stop '10.0.0.65'
Will result in a dhcpd.conf:
shared-network NET01 {
authoritative;
subnet 10.0.0.0 netmask 255.255.255.0 {
option routers 10.0.0.1;
default-lease-time 86400;
max-lease-time 86400;
range 10.0.0.60 10.0.0.70;
range 10.0.0.55 10.0.0.65;
}
on commit {
set shared-networkname = "NET01";
}
}
This is not allowed by ISC DHCPd:
dhcpd[3307]: /run/dhcp-server/dhcpd.conf line 25: lease 10.0.0.63 is declared twice!
dhcpd[3307]: range 10.0.0.55 10.0.0.65;
(cherry picked from commit b0e1c8a9c9ef470297bf3c9f5059ad7c720c46ff)
|
|
|
|
|
|
|
|
|
|
(cherry picked from commit bee080daffad41468eee6084f54bc67b1470f914)
|
|
(cherry picked from commit 397b04115ff522f2240059cdb08bdf1561ea8bde)
|
|
(cherry picked from commit 38b3dff1ebdf8c26a28d0befa6dcf0b4f51f21be)
|
|
Commit c17f259d ("router-advert: T3561: add support for specific routes") used
tabs over spaces in the Migration script which triggered a TabError (inconsistent
use of tabs and spaces in indentation").
(cherry picked from commit acc701bac3483a3242c77a2e00c076890e27eea9)
|
|
Co-authored-by: Mark Royds <mark.royds@vitaminit.co.uk>
(cherry picked from commit c17f259d09abd2bf632d09400fe8deb4c2781d32)
|
|
interfaces
The MTU size of the source-interface must be greater or equal to the MTU of the
pseudo ethernet interface.
(cherry picked from commit 06dae2734aee09885e34aec0df397985c2a36961)
|
|
(cherry picked from commit ed817477dd418f4b448910e990f38a9a3de5ee73)
|
|
We always read back the RPS value from eth1 which worked on the CI smoketests,
but not when running a smoketest with only one interface e.g. by:
$ TEST_ETH="eth2" /usr/libexec/vyos/tests/smoke/cli/test_interfaces_ethernet.py
(cherry picked from commit a431adf8676ea377175b91776082eb37d4773e80)
|
|
(cherry picked from commit 5e1ed4086f96141611680892911dad82c28795ee)
|
|
vyos@vyos:~$ show hardware storage nvme
Node SN Model Namespace Usage Format FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1 S437Nxxxxxxxxx SAMSUNG MZQLB960HAJR-00007 1 25.17 GB / 960.20 GB 512 B + 0 B EDA5202Q
/dev/nvme1n1 S437Nxxxxxxxxx SAMSUNG MZQLB960HAJR-00007 1 38.36 GB / 960.20 GB 512 B + 0 B EDA5202Q
vyos@vyos:~$ show hardware storage smart nvme0n1
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZQLB960HAJR-00007
Serial Number: S437Nxxxxxxxxx
...
|
|
|
|
Replace function get_interface_config to
function get_interface_config, as we have
in 1.4 branch.
It need after this cherry-picked commit edcdea8
|
|
(cherry picked from commit 5b5e74fb667fa5a5abec779b6c411b3864f3b5fb)
|
|
(cherry picked from commit 21d97ba0651fc20bded91e22e00a402d0044da3c)
|
|
Implementing a wrapper which will - based on the command - add a sudo prefix
to the execution string seemed to be a nice idea but unfortunately it did not
only not get momentum but also the codebase somethis added an implicit "sudo"
call a second time.
This resulted in a call: "sudo sudo systemctl"
The entire functionality was removed again and if an op-mode script requires
root priviledges it must be explicitly called with them - no black magic.
(cherry picked from commit b76931e6d3a4bd0cdb74ca447a746ab6855fcf55)
|
|
This fixes a bug when show dynamic dns status returned (formatted) UNIX
time 0. I have changed the code to use ddclient's mtime value in the cache
file, which is updated on every successful sync with DDNS service as opposed
to atime, which was previously used.
(cherry picked from commit 89b127647cbf3fea3a439f43efa32a31aa03524e)
|
|
Commit dce67433 ("util: T2226: rewrite resume-vm to use run") changed the way
in which the script executed system binaries in a way which could not be
processes by the underlayin infrastructure (lists are not supported, only
strings).
(cherry picked from commit fa05e4267c17d93c4e9594a0ba32e66c7b2a1d61)
|
|
(cherry picked from commit 7de7a1b2d127df85d4224162116c1d4c984b022b)
|
|
If ddclient is not problery configured it will start up but no status file is
generated. This commit checks if the status file exists before reading it.
(cherry picked from commit 041cea6d7a13a804b4e656778048bcefd0a46cb8)
|
|
(cherry picked from commit e36120d93ee1c8077b713c4bb9c10035f0a9957a)
|
|
Commit b0520172 ("dhcpv6-server: T3549: fix incorrect syntax for global
name-server definition") changed how the daemon configuration represents global
DNS nameservers.
Test updated.
(cherry-picked from commit ae57c5dc783d8c87382e25e031e21d8c2be59d03)
|
|
dhcp6.name-servers is a comma-delimited, multi-value list of name-servers that
should only appear once in the dhcpdv6.conf file.
|
|
It is not possible to change the VLAN encapsulation protocol "on-the-fly". For
this "quirk" we need to actively delete and re-create the VIF-S interface.
(cherry picked from commit cd504035015dca62149b57bc07d8e002bd8723b1)
|
|
As we do not allow any invalid raw options passed into ISC dhcpd we should also
verify this behavior with a smoketest.
(cherry picked from commit 8ab55eb237370b2152b2c0027af5cf16a69675af)
|
|
The problem of using the move() operation over render() is that render will
silently create the directory tree in the background and move() does not.
This means that on first boot when /run/dhcp-server does not exist, move will
fail with a FileNotFoundError.
Instead of using move() we render() the configuration two times, one for
validating it via dhcpd -t and the other time to really apply it to the service.
The performance impact should be little as the config should still be cached in
the system RAM.
(cherry picked from commit 1f68b69328c961e450ac70b12f7bf073d70355d7)
|
|
(cherry picked from commit 37f3ead353625b53cfa8953196a9c32b42a10e7f)
|
|
(cherry picked from commit d96336a808e500934fc4fd9423345d0b965d35ac)
|