Age | Commit message (Collapse) | Author |
|
Based on wpa_supplicant documentation.
mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit)
hex-string (2..64 hex-digits)
Changed allowable length of CKN from strong 64 hex-digits
to the range (2..64 hex-digits)
|
|
T5007: Fix multicast implementation for the tunnel interfaces
|
|
Multicast has not been implemented for the tunnel interfaces.
We have only configuration CLI commands that do anything.
Fix it.
ip link set dev <tag> multicast on
ip link set dev <tag> multicast off
(cherry picked from commit ac821d0d1764e9623015e04c5158a06c00ab370b)
|
|
T5011: Set default values for min_mtu max_mtu
|
|
T4978: Default values of port rewrite default container values
|
|
As we have the same variable name 'default_values' for container
name, port and volume, it rewrites default container parameters
with default port parameters
Fix it
(cherry picked from commit 679efe8ac7998ba1b8f3c7c4bfc7508d8869907d)
|
|
Some interface drivers don't support/provide min_mtu and max_mtu values
For example VyOS in docker container with 'veth' driver on some
platforms
As a workarund add default values for min/max MTU for calculations
and pass function "verify_mtu(config)"
(cherry picked from commit 87fb9be4cab3a261406c69c723add7467e4ef1fa)
|
|
T4971: Accel-ppp verify if client_ip_pool key exists in config
|
|
If 'client_ip_pool' not exists in config we cannot search it
in the dictionary
dict_search_recursive(config, 'gateway_address', ['client_ip_pool', 'name'])
Add check for Equuleus
|
|
smoketest: tftp: T4012: extend process scanning loop for VRFs (equuleus)
|
|
T5009: relay: Fix op-mode for restarting dhcp relay service
|
|
|
|
This extends commit c6016db17ef ("smoketest: tftp: T4012: add busy waiting loop
when validating service availability") so that we also wait when reading in
the VRF result(s).
|
|
T4971: PPPoE server add named ip pool and attr Framed-Pool
|
|
T1993: PPPoE-server add section shaper and fwmark option
|
|
T5001: Replace links to the phabricator site (equuleus)
|
|
Replace links to the phabricator site from https://phabricator.vyos.net to
https://vyos.dev
(cherry-picked form commit bd9416a6aa9d5d0a746dc2cebc8d0330fd27d1a2)
|
|
Add a new feature to allow to use named pools
Also it can be used with RADIUS attribute 'Framed-Pool'
set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
Add accel-ppp include client-ip-pool-name.xml.i
Can be used in other accep-ppp CLI as "include"
|
|
Backport "dict_search_recursive" from vyos.util 1.4 to 1.3
data = {
'interfaces': {'dummy': {'dum0': {'address': ['192.0.2.17/29']}},
'ethernet': {'eth0': {'address': ['2001:db8::1/64', '192.0.2.1/29'],
'description': 'Test123',
'duplex': 'auto',
'hw_id': '00:00:00:00:00:01',
'speed': 'auto'},
'eth1': {'address': ['192.0.2.9/29'],
'description': 'Test456',
'duplex': 'auto',
'hw_id': '00:00:00:00:00:02',
'speed': 'auto'}}}
}
dict_search_recursive(data, 'hw_id') will yield both '00:00:00:00:00:01' and
'00:00:00:00:00:02' as generator object.
|
|
Extended PPPoE-server rate-limiter to avoid shaping marked resources
Often this feature needs for ISP, which provides access to some IX
or its resources.
set service pppoe-server shaper fwmark '223'
|
|
T2603: PPPoE-server change default min-mtu value 1280 for Equuleus
|
|
Minimum acceptable MTU. If client will try to negotiate less then
specified MTU then it will be NAKed or disconnected if rejects
greater MTU.
Change 'min-mtu' from 1492 to 1280 for 1.3.3
|
|
smoketest: tftp: T4012: add busy waiting loop when validating service availability
|
|
availability
TFTP daemon is started as "fire and forget" and systemctl can return (thus
commit will return) but the daemon itself is not yet running.
This adds a loop checking if the service runs and will fail after 10 seconds.
|
|
T4975: always sync() filesystem after commit (equuleus)
|
|
This reverts commit 7b36c363cd5b0168bd83c399f50a0a360ba3ee58.
A general solution is implemented in Commit ae9dde04 ("T4975: always sync()
filesystem after commit").
|
|
(cherry picked from commit 29a44a73c638cb22839aa32986de367231b6efe9)
|
|
login: T4975: Fixed broken CLI commands
|
|
User profile files are not saved to disk after configuration is fully applied.
Because of this, after a fast system reset, profile files can be empty, and CLI
is broken.
This fix adds a `sync()` call after the user's configuration, which should
protect from data loss and fix the problem with profiles.
|
|
T4947: container: fix existing issues in equuleus after backport from 1.4
|
|
|
|
VyOS 1.3 does not support automatic generation of the (default: <>) string
from XML defaultValue nodes. Specify help string manually.
|
|
|
|
pppoe: T4948: add CLI option to allow definition of host-uniq flag (equuleus backport)
|
|
container: T4947: support mounting container volumes as ro or rw (equuleus backport)
|
|
T4949: Backport "monitor log" and "show log" op-mode definitions from current to equuleus
|
|
(cherry picked from commit 1bd69a81dc32fdaa62be27e4f5ae3cfe333f2a26)
|
|
(cherry picked from commit 68a8cd2612cb1b00d381059747de8107f38e8c96)
|
|
|
|
Some ISPs seem to use the host-uniq flag to authenticate client equipment.
Add CLI option in VyOS to allow specification of the host-uniq flag.
set interfaces pppoe pppoeN host-uniq <value>
(cherry-picked from commit 38bab79324087df5a9057c23b85a0a784c09540a)
|
|
validators: T4875: use file-path to replace validator 'interface-name' (backport)
|
|
(cherry-picked from commit 046bb9ccd56ac5e97c638bb4a9ca856d3d36026a)
|
|
(cherry picked from commit f0bc6c62016d285f0645c4b3ba8b1451c40c637f)
|
|
Whenever a container is used and a folder is mounted, this happenes as
read-write which is the default in Docker/Podman - so is the default in VyOS.
A new option is added "set container name foo volume mode <ro|rw>" to specify
explicitly if rw (default) or ro should be used for this mounted folder.
(cherry picked from commit 275ea7303cfdb79c042da1b710622aee17a488a8)
|
|
Smoketest fixes backport for equuleus
|
|
(cherry picked from commit 5cd2cd89b295c728f21c418c3fa081560a00eefc)
|
|
Commit cca7ec3e ("T4832: dhcp: Add IPv6-only dhcp option support (RFC 8925)")
extended the smoketests but used int over str when calilng the CLI wrapper.
This led to:
TypeError: sequence item 7: expected str instance, int found
(cherry picked from commit a741a9297f02f938653aeaa1af3c4a57364e9215)
|
|
T4906: Fix show vpn ipsec connections data
|
|
We get incorrect data when shows connections
As we get list of all connections we should compare the connection
name with entries in list and set correct data if they match
|