| Age | Commit message (Collapse) | Author |
|---|
|
Using "ls" is much faster compared to "find ... -exec basename"
|
|
|
|
|
|
Merge two dictionaries. Only keys which are not present in destination will
be copied from source, anything else will be kept untouched. Function will
return a new dict which has the merged key/value pairs.
Before:
{'device': {'usb0b2.4p1.0': {'speed': '9600'},
'usb0b2.4p1.1': {'data-bits': '8',
'parity': 'none',
'speed': '115200',
'stop-bits': '2'}}}
After:
{'device': {'usb0b2.4p1.0': {'data-bits': '8',
'parity': 'none',
'speed': '9600',
'stop-bits': '1'},
'usb0b2.4p1.1': {'data-bits': '8',
'parity': 'none',
'speed': '115200',
'stop-bits': '2'}}}
|
|
|
|
|
|
radvd[31898]: AdvValidLifeTime must be greater than AdvPreferredLifetime in
radvd.conf, line 19
This happens with the following configuration:
vyos@vyos# show service router-advert
interface eth0.20 {
name-server 2001:4860:4860::8888
prefix ::/64 {
valid-lifetime 7200
}
}
A validator is added to solve this issue and radvd will run again.
|
|
login: radius: T2299: Move RADIUS priority XML definitions to system-…
|
|
|
|
T2610: default-lifetime is not reflected in the RA message
|
|
|
|
login: radius: T2299: Implement RADIUS servers priority
|
|
|
|
pppoe-server: T2601: Add default CCP values if not defined via CLI
|
|
l2tp: T2602: Delete excess characters
|
|
For an unknown reason snmpd not always starts after reboot.
|
|
|
|
|
|
|
|
|
|
ifconfig: T2599: fix regex for search, smaller numbers
|
|
|
|
ifconfig: T2599: sort interface by natural order
|
|
|
|
When multiple RADIUS servers have been configured, they have been all rendered
onto a single line in the config. This lead to errors in syslog and not all
servers beeing reachable.
|
|
vti: T2576: show interfaces missed VTI
|
|
|
|
|
|
The "to" qualifier did not get rendered when using source ports in masquerade
targets. This case was totally missed out when porting.
|
|
|
|
|
|
List all processes running in given VRF
vyos@vyos:~$ show vrf black processes
4624 sshd
4404 ntpd
|
|
|
|
|
|
Only IP prefixes are allowed to be added by the CLI thus we can drop the
same check inside the Python script to validate the prefix.
|
|
|
|
Commit 5deb12c509be ("ssh: T2321: add VRF support") restructured the Port
assignment (cleanup from the early days) but it accesses a string with methods
used for a list, resulting in the funny default port 2.
|
|
We specify NFT source/destination ports within a { } group, but if the port
range in question is negated, we need to move the != fraction out of { } and
infront of that group, else NFT loading will fail big time.
|
|
This reverts commit 927c054d9236c2c34ca43c1cbfff10fcfd7f5077.
|
|
After commit 1c7d7cb ("wwan: T2529: migrate device from ttyUSB to
usbXbY.YpZ.Z") the up/down scripts did not properly parse the passed tty
for setting up default routes.
|
|
|
|
|
|
|
|
tested using:
set nat destination rule 399 description 'Redirect DNS iot VLAN'
set nat destination rule 399 destination address '!192.168.67.243-192.168.67.244'
set nat destination rule 399 destination port '53'
set nat destination rule 399 inbound-interface bond10.204
set nat destination rule 399 log
set nat destination rule 399 protocol 'tcp_udp'
set nat destination rule 399 translation address '192.168.67.243'
set nat destination rule 399 translation port '53'
set nat destination rule 400 description 'Redirect DNS lan VLAN'
set nat destination rule 400 destination address '!192.168.67.243-192.168.67.244'
set nat destination rule 400 destination port '53'
set nat destination rule 400 inbound-interface bond10.204
set nat destination rule 400 log
set nat destination rule 400 protocol 'tcp_udp'
set nat destination rule 400 translation address '192.168.67.243'
set nat destination rule 400 translation port '53'
set nat destination rule 401 description 'Redirect DNS guest VLAN'
set nat destination rule 401 destination address '!192.168.67.243-192.168.67.244'
set nat destination rule 401 destination port '53'
set nat destination rule 401 inbound-interface bond10.204
set nat destination rule 401 log
set nat destination rule 401 protocol 'tcp_udp'
set nat destination rule 401 translation address '192.168.67.243'
set nat destination rule 401 translation port '53'
|
|
|
|
|
|
|
|
* 'serial-console' of github.com:c-po/vyos-1x:
console: T2569: run VGA console powersave on tty1
console: T2569: replicate console settings to grub.cfg
Debian: fix warning about undefined substitution variables
console: T2569: only start serial console if device exists
console: T2529: migrate from ttyUSB device to new device in /dev/serial/by-bus
console: T2570: remove support for Hayes Modems
netconsole: T2561: use migrator to delete config nodes
console: T2569: initial implementation with XML and Python
|
|
|
|
|
