summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-23dhcpv6-pd: T2677: add support for rapid-commit optionChristian Poessinger
When rapid-commit is specified, dhcp6c will include a rapid-commit option in solicit messages and wait for an immediate reply instead of advertisements.
2020-08-23dhcpv6-pd: T2821: support dhcpv6-pd without "address dhcpv6"Christian Poessinger
Currently DHCPv6-PD requires an interface address configured to dhcpv6 on the CLI. This is not required also sometimes there is either no dhcpv6 interface addressing available (PPPoE) or wanted. This limitation was artificial due to the old interface code. Change the implementation to spawn the DHCPv6 client and request a prefix even when there is no address request configured.
2020-08-22ifconfig: T2653: drop unused vyos.ifconfig.pppoeChristian Poessinger
2020-08-22dhcpv6-pd: T2677: optimize CLI interface for PD configurationChristian Poessinger
The current CLI did not support multiple prefix-delegations per interface. Some ISPs only send one /64 to a client per prefix-delegation request, but they allow the customer to request multiple prefixes. The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0). In the past the user needed to know what prefix will be assigned and required to calculate the sla-len by himself. The 'sla-len' node was dropped and is now calculated in the background from the 'dhcpv6-options pd 0 length' node. It is no longer mandatory to supply the 'sla-id' node, if sla-id is not specified it is 'guessed' by counting upwards. Example configuration: ---------------------- ethernet eth1 { address dhcpv6 dhcpv6-options { pd 0 { length 56 interface eth2 { address 1 } } } } This will request a /56 assignment from the ISP and will delegate a /64 network to interface eth2. VyOS will use the interface address ::1 on the delegate interface (eth2) as its local address.
2020-08-20Debian: alphabetically sort (build-)dependenciesChristian Poessinger
2020-08-20lcd: T2564: remove lcdproc-extra-drivers packageChristian Poessinger
2020-08-20Merge pull request #532 from erkin/currentDaniil Baturin
VRRP: T2761: Extend "show vrrp" op-mode command with router priority
2020-08-20VRRP: T2761: Extend "show vrrp" op-mode command with router priorityerkin
2020-08-19https: T2815: adjust for change in certbot config directoryJohn Estabrook
2020-08-19certbot: T2815: change config dir to /config/auth/letsencryptJohn Estabrook
2020-08-20Merge pull request #530 from DmitriyEshenko/1x-anyconnect-fix01Christian Poessinger
anyconnect: T2811: Return None if anyconnect not configured
2020-08-20Merge pull request #531 from sever-sever/T915-timersChristian Poessinger
mpls-ldp: T915: Add discovery hello timers
2020-08-19mpls-ldp: T915: Add discovery hello timerssever-sever
2020-08-19lldp: op-mode: convert data processing from XML to JSONChristian Poessinger
2020-08-19anyconnect: T2811: Return None if anyconnect not configuredDmitriyEshenko
2020-08-18op-mode: T2791: Add monitor traceroute explicit for ipv4-ipv6 and vrfChristian Poessinger
op-mode: T2791: Add monitor traceroute explicit for ipv4-ipv6 and vrf
2020-08-18anyconnect: T2036: add anyconnect VPN supportEshenko Dmitriy
2020-08-18op-mode: T2791: Add monitor traceroute explicit for ipv4-ipv6 and vrfsever-sever
2020-08-18dhcpv6: T2510: fix missing id-assoc for non temporary addressChristian Poessinger
2020-08-18lcd: T2564: add support for Lanner, Watchguard, Symantec boxesChristian Poessinger
2020-08-18ifconfig: T2653: bugfix when removing DHCP addressChristian Poessinger
DHCP service was not stopped when an DHCP address got removed from the interface. DHCP service is now always stopped if it is not configured explicitly.
2020-08-16Merge branch 'T2723' of https://github.com/jack9603301/vyos-1x into currentChristian Poessinger
* 'T2723' of https://github.com/jack9603301/vyos-1x: tcptraceroute: T2723: Modify port description tcptraceroute: T2723: Improve command line options, support execution without port tcptraceroute: T2723: Support VRF tcptraceroute: T2723: Fix the problem that tcptraceroute6 cannot be executed
2020-08-16Merge pull request #510 from efficiosoft/vyos_template_rewriteChristian Poessinger
vyos.template: T2720: Rework vyos.template Python library
2020-08-16dhclient: T2277: remove VRF route when DHCP client exitsChristian Poessinger
2020-08-16ping: op-mode: T2762: always run in default VRF unless defined otherwiseChristian Poessinger
When connected to VyOS by SSH through any VRF, every command is executed in the VRF context thus e.g. ping will run in VRF context but no VRF was defined on the CLI. ping should always run in the default VRF no matter where it is executed, unless a VRF instance is explicitly defined by CLI.
2020-08-16Merge pull request #523 from jjakob/increase-max-nat-rule-number-T2764Christian Poessinger
nat: T2764: increase maximum rule number to 999999
2020-08-15dhclient: T2277: retrieve VRF inform from sysfs rather then iproute2Christian Poessinger
2020-08-15Merge branch 't2564-lcd' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 't2564-lcd' of github.com:c-po/vyos-1x: lcd: T2564: flatten CLI interface system display: T2564: Added test model system display: T2564: Dictionary code update system display: T2564: Conf files to /run system display: T2564: Changed "duration" to "time" system display: T2564: py code cleanup system display: T2564: Replace "config (enabled|disabled)" with "display disabled" system display: T2564: Lowercase model names system display: T2564 Extend VyOS to support appliance LCDs
2020-08-15pseudo-ethernet: T2800: source-interface must not be member of a bridgeChristian Poessinger
2020-08-15vyos.configverify: no need to call .keys() when searching dictChristian Poessinger
2020-08-15vyos.configdict: keep is_member import as local as possibleChristian Poessinger
2020-08-15pppoe-server: T2796: at least one server interface must be definedChristian Poessinger
Add missing verify() check that at least one interface must be defined to listen to PPPoE data.
2020-08-15lcd: T2564: flatten CLI interfaceChristian Poessinger
* set system lcd device <device> * set system lcd model <modeml> Both device and model have completion helpers for supported interfaces and LCD displays.
2020-08-15Merge pull request #526 from jack9603301/T2706Christian Poessinger
monitor-ndp:T2706: Modify the comment of `monitor ndp type`
2020-08-15Merge pull request #525 from sever-sever/T2277Christian Poessinger
dhclient: T2277: Hook for default route in vrf
2020-08-15monitor-ndp:T2706: Modify the comment of `monitor ndp type`jack9603301
Since the comment was incorrectly applied to the command when writing the command before, modify it here
2020-08-14dhclient: T2277: Hook for default route in vrfsever-sever
2020-08-14templates: dhcp-client: fix "Autogenerated by" script nameChristian Pössinger
Commit 21bc98f1 ("ifconfig: dhcp: T2767: client must not start when interface is disabled") dropped dhcp.py which is now directly handled by interface.py. This change should also be reflected in the generated files.
2020-08-13console-server: T2490: use get_first_key=True on get_config_dict()Christian Poessinger
2020-08-13ifconfig: dhcp: fix ModuleNotFoundError: No module named 'vyos.ifconfig.dhcp'Christian Poessinger
Commit 21bc98f1 ("ifconfig: dhcp: T2767: client must not start when interface is disabled") dropped the vyos.ifconfig.dhcp module but not removed it from the modules import list.
2020-08-12Merge branch 'system-display' of https://github.com/fmertz/vyos-1x into ↵Christian Poessinger
t2564-lcd * 'system-display' of https://github.com/fmertz/vyos-1x: system display: T2564: Added test model system display: T2564: Dictionary code update system display: T2564: Conf files to /run system display: T2564: Changed "duration" to "time" system display: T2564: py code cleanup system display: T2564: Replace "config (enabled|disabled)" with "display disabled" system display: T2564: Lowercase model names system display: T2564 Extend VyOS to support appliance LCDs
2020-08-12ifconfig: dhcp: T2767: client must not start when interface is disabledChristian Poessinger
ISC DHCP client will always place an Interface in admin-up state once it is started. We must ensure that if an interface is placed in A/D state that the DHCP client proccess is not launched and terminated if it is running.
2020-08-11tcptraceroute: T2723: Modify port descriptionjack9603301
In response to #522 request, modify `Perform operations on TCP ports` to `TCP port to connect to for path tracing`
2020-08-10host_name: T2784: remove unused importsJohn Estabrook
2020-08-10host_name: T2784: remove unused arg in verify, unneeded arg in get_configJohn Estabrook
2020-08-10Merge pull request #524 from sever-sever/T2779Christian Poessinger
op-mode:T2779:Fix lldp neigh interface ethX
2020-08-10op-mode:T2779:Fix lldp neigh interface ethXsever-sever
2020-08-10tcptraceroute: T2723: Improve command line options, support execution ↵jack9603301
without port Because the ports of tcptraceroute and tcptraceroute6 do not need to be specified in this feature, modify the command line syntax
2020-08-10tcptraceroute: T2723: Support VRFjack9603301
2020-08-10tcptraceroute: T2723: Fix the problem that tcptraceroute6 cannot be executedjack9603301
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 02:20:24 +0000