| Age | Commit message (Collapse) | Author |
|---|
|
Required to not trigger the "Misssing WPA key or RADIUS server" exception due
to the new default value added in commit 2a0428bf ("wireless: T2963: set default
'both' on 'security wpa mode'").
|
|
|
|
Commit 5db3d631 ("ifconfig: mtu: disallow MTU < 1280 bytes when IPv6 is enabled
on the interface") checked the "mtu" key for it's value and the test only passed
if mtu was larger then the required 1280 bytes when IPv6 address have
been configured on the link.
wireless (WiFi) interfaces have no MTU node - thus this always resulted in a
Python KeyError.
|
|
Migrate the domain-search node (which occurs three times) to an includable
snippet. Also re-use the fqdn validator to keep the regex patterns to as few
locations as possible.
|
|
dhcpv6: T2961: support stateless dhcpv6 clients
|
|
For both source and destination NAT always the LOG name contained DST - which
is definately false. This has been corrected to use SRC and DST on the
appropriate rules.
|
|
This commit adds support for configuring the DHCPv6 server to serve
"stateless" DHCPv6 clients (those that send an information-request
message and do not request an address).
The change introduces a `common-options` node at the
`shared-network-name` level, which allows specifying options
applicable to clients regardless of subnet assigned (or in the case of
stateless clients, when no subnet is assigned). Parameters specified
at the subnet level take precedence over those set at the
shared-network level.
Presently, only parameters that are meaningful to stateless clients
have been exposed under `common-options`, as there is no precedent of
exposing parameters at multiple levels under the current DHCPv4 or
DHCPv6 configuration syntax. If desired, additional parameters could
certainly be added with relative ease.
|
|
Remove duplicate localhost listen IP addresses. Commit ca61add5e7 ("ntp: T2944:
By default do not listen port 123 on any address") explicitly added listen
statements for localhost.
|
|
|
|
|
|
As VyOS vrux (1.2.7) requires a mirgator (1-to-2) for the MPPE node change
(T2829) we need to shift all other migrators in 1.3 by one.
As migrators probe the existance of nodes no negative side-effects are
expected.
|
|
|
|
A test statement was still present in the production code introduced in commit
efeac80f8 ("pppoe-server: T2829: migrate 'ppp-options mppe' to leafNode").
This has been fixed.
|
|
|
|
|
|
Required to get a common CLI for all services provided by Accel-PPP. Once the
CLI for each service is consitent - Jinja2 templates can be reused together
with get_config_dict().
|
|
|
|
* move "network-settings gateway-address" to "gateway-address"
* move "network-settings client-ip-settings" to "client-ip-pool"
|
|
Preparation before using get_config_dict() and common Jinja2 templates.
|
|
|
|
|
|
|
|
In order to reuse as much as possible before migrationg to get_config_dict()
and re-use Jinja2 snippets the name-server node must be moved one level up to
'set vpn sstp name-server'.
|
|
|
|
Status file directory for show command was wrong, resulting in no
output.
Now points to '/var/run/openvpn/{}.status'
|
|
|
|
|
|
|
|
|
|
|
|
Sometimes (PPPoE server is one of them) a simple defaultValue in the XML is not
enough - several values should be set. In order to support a list of
defaultValues you can now simply list them as a whitespace separated string.
Example:
<defaultValue>pap chap mschap mschap-v2</defaultValue>
will generate a Python list ['pap', 'chap', 'mschap', 'mschap-v2'] when
retrieved by vyos.xml.defaults()
|
|
Commit ba050937 ("accel-ppp: T2953: drop redundant CLI definitions ") dropped
the defaultValue of 'prefer' for MPPE making the smoketests fail. This has been
corrected.
|
|
|
|
|
|
|
|
ntp: T2944: By default do not listen port 123 on any address
|
|
|
|
|
|
With commit 38ae3032 ("pppoe-server: T2936: move to get_config_dict()") there
are now RADIUS default values present in the XML definitions - those must be
proberly mangled for the WiFi interface.
|
|
Every interface knows if it is part of a bridge or not - except a VLAN (VIF)
interface. Also VLANs should be aware of its master bridge.
Add a testcase to ensure when VIFs on an interface change the bridge does not
loos one of it's members.
|
|
|
|
We must use exists() as get_config_dict() will always return {} - even when an
empty interface node like
+macsec macsec1 {
+}
exists.
|
|
The config path is altered in get_interface_dict() to the base of the interface
in question, e.g. 'interfaces macsec macsec1' - this must be reflected when
calling othe methods of Config().
|
|
For easier configuration read in (CLI) validation and also template rendering
it makes sense to drop the old, single implementation and move to the new,
generic get_config_dict() approach.
Recurring configuration parts like ip-pool, ipv6-pool and nameservers have
also been split our into individual templates which will be included through
Jinja2 - leading to a single-source of the template sections, too.
|
|
|
|
When individual peers that have been removed got determined they have been
added to the config dict as list instead of string - which broke the system
plumbing commands as they can not handle a Python list.
|
|
If for whatever reason the macsec interface dropped out of the Kernel - only
call .remove() when it still exists to avoid any exceptions at all.
|
|
vrrp: T2933: Add option virtual-address-excluded
|
|
|
|
pppoe-server: T2919: Add possibility change Called-Station-Id format
|
