summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-05ddclient: T5791: Update dynamic dns configuration pathIndrajit Raychaudhuri
Modify the configuration path to be consistent with the usual dialects of VyoS configuration (wireguard, dns, firewall, etc.) This would also shorten the configuration path and have a unified treatment for RFC2136-based updates and other 'web-service' based updates. While at it, add support for per-service web-options. This would allow for probing different external URLs on a per-service basis.
2023-12-03Merge pull request #2568 from vyos/mergify/bp/sagitta/pr-2566Christian Breunig
vti: T5769: restore interface settings on down -> up event (backport #2566)
2023-12-03vti: T5769: restore interface settings on down -> up eventChristian Breunig
On VTI interface link down the link-local IPv6 address is removed. As soon as the IPSec tunnel is online again, vti-up-down helper is called which only places the interface in up state using iproute2 command sudo ip link set vti0 up This does not restore the IPv6 LL address. Instead use vyos.ifconfig to properly re-initialize the VTI interface using the generic update() method. (cherry picked from commit d90ca4415bed8ce99c854243dca3036e76497270)
2023-12-02Merge pull request #2565 from vyos/mergify/bp/sagitta/pr-2564Viacheslav Hletenko
T5796:add/fixed OCSERV HTTP security headers (backport #2564)
2023-12-02 T5796:add/fixed OCSERV HTTP security headersfett0
(cherry picked from commit db51546edd653d3637cb26d6957ce5222d44d395)
2023-12-02Merge pull request #2563 from vyos/mergify/bp/sagitta/pr-2562Christian Breunig
mdns: T5793: Cleanup avahi-daemon configuration in `/etc` [followup] (backport #2562)
2023-12-02mdns: T5793: Cleanup avahi-daemon configuration in `/etc`Indrajit Raychaudhuri
`/etc/avahi` technically can be deleted since we operate with avahi-daemon configuration in `/run/avahi-daemon`. But we still need to keep `/etc/avahi/services` because avahi-daemon `chroot` to that location at startup. This is setup at build time via `AVAHI_CONFIG_DIR` and there is no way to change it at runtime. (cherry picked from commit 2b57ca6c3f9ff98cd6d4dd2a101a8b72ed2d94f4)
2023-12-02Merge pull request #2561 from jestabro/sagitta-http-apiChristian Breunig
http-api: T5782: simplifications for config mode http-api
2023-12-01Merge pull request #2560 from vyos/mergify/bp/sagitta/pr-2559Christian Breunig
mdns: T5793: Cleanup avahi-daemon configuration in `/etc` (backport #2559)
2023-12-01http-api: T5782: use single config-mode script for https and http-apiJohn Estabrook
2023-12-01http-api: T5768: remove auxiliary http-api.confJohn Estabrook
2023-12-01mdns: T5793: Cleanup avahi-daemon configuration in `/etc`Indrajit Raychaudhuri
`/etc/avahi` can be deleted since we operate with avahi-daemon configuration in `/run/avahi-daemon`. (cherry picked from commit 33c96654f485a13fe3475bb89dec3ad26107058e)
2023-12-01Merge pull request #2557 from vyos/mergify/bp/sagitta/pr-2467Christian Breunig
T5727: Use native URL validator instead of regex-based validator (backport #2467)
2023-12-01Merge pull request #2558 from vyos/mergify/bp/sagitta/pr-2547Christian Breunig
policy: T4704: Allowed to set metric (MED) to (+/-)rtt (backport #2547)
2023-12-01policy: T4704: Allowed to set metric (MED) to (+/-)rttaapostoliuk
Allowed to set metric (MED) to (+/-)rtt in the route-map. (cherry picked from commit 5d98e806ef4edb4439620eff60215aaf30b5a592)
2023-12-01Merge pull request #2555 from indrajitr/sagitta-ddclient-backportsChristian Breunig
ddclient: T5573,T5574,T5612,T5708: Backport ddclient related changes
2023-12-01Merge pull request #2556 from vyos/mergify/bp/sagitta/pr-2459Christian Breunig
mdns: T5723: Always reload systemd daemon before applying changes (backport #2459)
2023-12-01T5727: Use native URL validator instead of regex-based validatorIndrajit Raychaudhuri
Replace regex-based URL validator with native validator from vyos-utils. Also, move `include/url.xml.i` to `include/url-http-https.xml.i` to reflect the fact that it is used only for HTTP(S) URLs. (cherry picked from commit 64322b19d6968195a6dc7c82e7e22126072377f5)
2023-12-01mdns: T5723: Always reload systemd daemon before applying changesIndrajit Raychaudhuri
Additionally, templatize system service override and move it to the runtime path. (cherry picked from commit eb906739047187c322b6ce9efe7c9479bed9a024)
2023-11-30ddclient: T5708: Fix VRF table generation in smoketestIndrajit Raychaudhuri
Ensure that the random VRF table name is 4 digits long, not 5 and stays within the the range of 100 - 65535.
2023-11-30ddclient: T5708: Additional smoketests for web-optionsIndrajit Raychaudhuri
Add additional smoketests for web-options validation. Also, format error messages to optionally include protocol name.
2023-11-30ddclient: T5708: Migration to 3.11.1 and related improvementsIndrajit Raychaudhuri
Fix execution bit for migration script
2023-11-30ddclient: T5708: Migration to 3.11.1 and related improvementsIndrajit Raychaudhuri
- Migrate to ddclient 3.11.1 and enforce debian/control dependency - Add dual stack support for additional protocols - Restrict usage of `porkbun` protocol, VyOS configuration structure isn't compatible with porkbun yet - Improve and cleanup error messages
2023-11-30ddclient: T5708: Validate proper use of `web-options`Indrajit Raychaudhuri
`web-options` is only applicable when using HTTP(S) web request to obtain the IP address. Apply guard for that.
2023-11-30ddclient: T5708: Ensure password is always wrapped in quotesIndrajit Raychaudhuri
Migration to 3.11.1 follow-up: This should make `ddclient.conf` parsing more resilient to edge cases (particularly when `password` isn't the last option right before the host parameter). ddclient config parser applies special treatment to the password field and would unwrap the quotes automatically. Also, switch from now deprecated `use=no` to `use=disabled`.
2023-11-30ddclient: T5708: Migrate `timeout` to `interval`Indrajit Raychaudhuri
Time interval in seconds to wait between DNS updates would be a bit more intuitive as `interval` than `timeout`.
2023-11-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-11-30ddclient: T5612: Additional refactoring for scripts and smoketestsIndrajit Raychaudhuri
Additional cleanup and refactoring for ddclient scripts including the smotektests.
2023-11-30ddclient: T5612: Adjust validator and completion for ddclientIndrajit Raychaudhuri
Adjust the validator and completion for ddclient to remove unsupported or superfluous protocols. Specifically, - remove 'nsupdate' protocol from the list because there is a separate config path for that protocol (rfc2136) - remove 'cloudns' protocol from the list because it has non standard configuration and is not supported by our configurator at this time
2023-11-30ddclient: T5612: Refactor zone configurationIndrajit Raychaudhuri
Refactor zone configuration to use shared XML snippet for all cases.
2023-11-30ddclient: T5612: Improve dual stack support for dyndns2 protocolIndrajit Raychaudhuri
dyndns2 protocol in ddclient honors dual stack for selective servers because of the way it is implemented in ddclient. We formalize the well known servers that support dual stack in a list and check against it when validating the configuration.
2023-11-30ddclient: T5612: Generate more reliable ddclient configIndrajit Raychaudhuri
Adjust the jinja template to avoid generating incorrect ddclient.conf in some cases. The template is reformatted to guarantee whitespacing and empty line separation.
2023-11-30ddclient: T5612: Relax hostname validation for apex and wildcard entryIndrajit Raychaudhuri
Some porvides (like 'namecheap') allow to use '@' or '*' as hostname prefix for apex and wildcard records. This commit relaxes the hostname validation to allow these prefixes.
2023-11-30ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-11-30ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-11-30ddclient: T5573: Fix smoketest for updated ddclient configIndrajit Raychaudhuri
2023-11-30ddclient: T5573: Update config generation aligning with caching fixesIndrajit Raychaudhuri
Now that the caching fixes are in place, we can update the config to remove legacy treatment of ipv4 related properties.
2023-11-30Merge pull request #2526 from vyos/mergify/bp/sagitta/pr-2503Daniil Baturin
vxlan: T5759: change default MTU from 1450 -> 1500 bytes (backport #2503)
2023-11-27Merge pull request #2549 from vyos/mergify/bp/sagitta/pr-2546Christian Breunig
vyos.utils: T5749: fix get_vrf_members() call to iproute2 (backport #2546)
2023-11-27vyos.utils: T5749: fix get_vrf_members() call to iproute2Christian Breunig
The iproute2 master argument is used for both a VRF and a bridge device. Using this in the VRF context would retrieve and report back the wrong interfaces: Old implementation: =================== >>> from vyos.utils.network import get_vrf_members >>> get_vrf_members('br1') ['eth1', 'eth2', 'vxlan1'] >>> get_vrf_members('black') ['br1.3002', 'br1.4000', 'pim6reg10200'] The new implementation: ======================= >>> from vyos.utils.network import get_vrf_members >>> get_vrf_members('br1') [] >>> get_vrf_members('black') ['br1.3002', 'br1.4000', 'pim6reg10200'] (cherry picked from commit e02546655adefe1a6fb3660402e697f872d3ffe7)
2023-11-27Merge pull request #2545 from vyos/mergify/bp/sagitta/pr-2544Christian Breunig
smoketest: T5783: check for any abnormal daemon termination (backport #2544)
2023-11-27smoketest: T5783: check for any abnormal daemon terminationChristian Breunig
We need to ensure when stressing FRR with the smoketests that no unexpected crash happens. We simply verify the PID of the individual FRR daemons. (cherry picked from commit 080e117884196136cd63e5d312ff43fba15f7182)
2023-11-23Merge pull request #2534 from c-po/backport-pr-2522Christian Breunig
https api: T5772: check if keys are configured unless PAM auth is enabled for GraphQL (backport #2522)
2023-11-23https api: T5772: check if keys are configuredDaniil Baturin
unless PAM auth is enabled for GraphQL (cherry picked from commit 8c450ea7f538beb0b2cd21d35c05d18db49a1802)
2023-11-22Merge pull request #2529 from vyos/mergify/bp/sagitta/pr-2527Daniil Baturin
pppoe: T5630: make MRU default to MTU if unspecified (backport #2527)
2023-11-22pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value. (cherry picked from commit ffd7339e2ea3eafdd97ac0763ca4a3913fe71bf3)
2023-11-22vxlan: T5759: change default MTU from 1450 -> 1500 bytesChristian Breunig
Found an odd behavior on Linux and the VyOS CLI implementation. If adding VXLAN interfaces using iproute2 the MTU differs depending on the creation syntax: ip -4 link add vxlan100 type vxlan dstport 4789 external df unset tos inherit \ ttl 16 nolearning vnifilter local 172.16.33.201 ip -4 link add vxlan200 type vxlan id 200 dstport 4789 local 172.16.33.201 dev eth0 ip -6 link add vxlan300 type vxlan id 300 dstport 4789 local 2001:db8:1::1 dev eth0 132: vxlan300: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN group default qlen 1000 link/ether 4e:fb:e3:f5:d9:59 brd ff:ff:ff:ff:ff:ff 133: vxlan200: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN group default qlen 1000 link/ether 0e:4e:f4:76:59:3f brd ff:ff:ff:ff:ff:ff 134: vxlan100: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether ba:b6:b7:0c:b1:37 brd ff:ff:ff:ff:ff:ff VyOS always sets a default MTU of 1450 bytes which is correct for IPv4 p2p links or multicast, but invalid for IPv6 p2p. Also this will break EVPN deployments as ethernet bridges with MTU < 1500 bytes are less fun. Increase default MTU to 1500 bytes. Migrate old configurations to use 1450 bytes if not specified otherwise on the CLI. (cherry picked from commit 4a163b016333e58fee9d6ec6b53a09e0160b3213)
2023-11-22Merge pull request #2525 from vyos/mergify/bp/sagitta/pr-2499Christian Breunig
vxlan: T5753: add support for VNI filtering (backport #2499)
2023-11-22vxlan: T5753: add support for VNI filteringChristian Breunig
In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to each customer. Without the ability of VNI filtering, we can not provide VXLAN tunnels with multiple tenants all requiring e.g. VLAN 10. To Test: set interfaces vxlan vxlan987 parameters external set interfaces vxlan vxlan987 source-interface eth0 set interfaces vxlan vxlan987 parameters vni-filter set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050 set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051 set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052 set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053 set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054 set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060 set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069 set interfaces bridge br0 member interface vxlan987 Add new op-mode command: show bridge vni Interface VNI ----------- ----------- vxlan987 10050-10054 vxlan987 10060 vxlan987 10069 (cherry picked from commit 35f6033d21053fa420e837f157cd9377a4ccd26a)
2023-11-22Merge pull request #2523 from vyos/mergify/bp/sagitta/pr-2519Viacheslav Hletenko
http: T5762: rename "virtual-host listen-port" -> "virtual-host port" (backport #2519)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 11:40:53 +0000