Age | Commit message (Collapse) | Author |
|
|
|
|
|
Commit 0a802d20c - ("smoketest: add config with VRF BGP instance") added a
config from a VMware VM. When moving to QEmu we must reduce the network card
ring-bufer size from 4096 -> 256, as the tests failed with:
> Driver only supports a maximum RX ring-buffer size of "256" bytes!
|
|
Replica of a real network. BGP is realised inside a VRF. The BGP peering to the
outside world is done via WireGuard that is backed by a PPPoE link - shiver!
|
|
BFD : T5161: add feature bfd static monitoring
|
|
|
|
|
|
|
|
|
|
Without the change users might get confused as the setting is specified
on the VyOS CLI but never makes it to FRR due to an internal FRR check.
|
|
Commit 923d7f1d7 (bgp: T5010: add missing for-loop when iterating over "both"
route-target) referenced export rt instead of both. This happened while
improperly copy-pasting the line.
|
|
|
|
This reverts commit bfe57cf80f4c71236f0885408d704a69575f0b30.
|
|
T5181: Fix condition to detect correct vrf name for vrf-vni
|
|
When we delete vrf vni there is a dictionary
{'only_vrf': 'red', 'new_frr_config': '!\n'}
|
|
conntrack-sync: T4888: rewrite the op mode script in the new format
|
|
Add verify() section to check if l3vni was removed in addition to the BGP
process under any given VRF.
|
|
|
|
T5181: Fix for correct deleting vni under vrf
|
|
|
|
xml: T5179: fix missed case in multi_to_list conversion
|
|
|
|
|
|
openvpn: T4402: Update openvpn server.conf.j2
|
|
FastAPI v0.92.0 (starlette v0.24.0) sets default attribute
Request._form; check for value == None instead of existence when
overriding Request class.
|
|
The ifconfig-pool command requires the arguments separated by a space.
Hence the space was added before the subnet mask.
|
|
|
|
|
|
T1237: Failover route add policy for targets checking
|
|
|
|
dns: T5144: Make dns dynamic status output legacy format compatible
|
|
We must only search and replace for "vrf red" or "vrf green" - the regex
used infact matched on all VRFs which is wrong. This would remove all VRF VNI
configurations when only changing a single VRf.
|
|
ipsec: T5042: Rewritten 'show vpn ipsec remote-access' command
|
|
debian packaging: T5172: set minimum Python version to 3.10
|
|
|
|
Add policy (any-available|all-available) for target checking for failover route
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check policy 'any-available'
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '192.168.122.1'
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '192.168.122.11'
It depends if we need that all targets must be alive on just one target.
|
|
since it's required for match statements
and for op mode introspection
|
|
T5123: op-mode: Support to show detailed ospf route table
|
|
|
|
pki: T3642: Fix show command if no CA certs are present
|
|
op-mode: T5159: dhcpv6 incorrect warning message
|
|
The operational command "show dhcpv6 server leases" shows a warning message e
ven if dhcpv6 setting are configured and ipv6 address
got assigned to clients.
|
|
|
|
Adjust the output of dynamic dns status to be compatible with both
legacy and new ddclient cache format. This is necessary because the
legacy format is still used by some of the dyndns2 family of protocols.
This is a follow-up to commit 3f3621b6874354.
|
|
This extends commit 3fa1092930c (op-mode: bgp: support VRF related "show bgp
vrf" commands).
vyos@vyos:~$ show bgp vni
Possible completions:
1-16777215 VXLAN network identifier (VNI) number
all
vyos@vyos:~$ show bgp vni 1 type
Possible completions:
1 EAD (Type-1) route
2 MAC-IP (Type-2) route
3 Multicast (Type-3) route
ead EAD (Type-1) route
macip MAC-IP (Type-2) route
multicast Multicast (Type-3) route
vyos@vyos:~$ show bgp vni 1 vtep
Possible completions:
<x.x.x.x> Remote VTEP IP address
|
|
|
|
T5137: Refactoring show tech-support report
|
|
Split script to small functions for flexible output reports.
Improve header for commands.
Each funciton easily can be modified or extended.
Remove splitting command/output via percent symbol.
Remove old commands and directiories like /etc/rc.local, iptables,
brctl, etc.
Remove ethtool operation for subinterfaces.
Extend ethtool debug output.
Add correct nftables command.
|
|
There is no need for protocol specific embedded smoketests as the route-map
option got removed. Tests are now conducted under the new CLI tree.
|
|
VLANIf('eth0.10').remove() will create and remove the VLAN in one command.
Thus one can ensure when calling remove() on a VLAN it will always
succeed.
|