Age | Commit message (Collapse) | Author |
|
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be
processed or not. This is done using
/proc/sys/net/conf/<iface>/seg6_* variables:
seg6_enabled - BOOL
Accept or drop SR-enabled IPv6 packets on this interface.
Relevant packets are those with SRH present and DA = local.
0 - disabled (default)
not 0 - enabled
Or the VyOS CLI command:
* set protocols segment-routing interface eth0 srv6
(cherry picked from commit 774cc97eda61eb0b91df820797fb3c705d0073d5)
|
|
Enable/Disable VRF strict mode, when net.vrf.strict_mode=0 (default) it is
possible to associate multiple VRF devices to the same table. Conversely, when
net.vrf.strict_mode=1 a table can be associated to a single VRF device.
A VRF table can be used by the VyOS CLI only once (ensured by verify()), this
simply adds an additional Kernel safety net, but a requirement for IPv6 segment
routing headers.
(cherry picked from commit 10701108fecb36f7be7eb7ef5f1e54e63da5fb4e)
|
|
T5804: nat: remove inbound|outbound interface from old configuration when it was set to <any>. (backport #2611)
|
|
dhcp: T5846: Ensure DUID regex range is bound (backport #2670)
|
|
was set to <any>.
(cherry picked from commit 5cb95aed965b45a900c6ba97c0bccefed83332b6)
|
|
The DUID regex was missing a lower bound, which could cause it not to
match when it should.
We have to specify the lower bound explicitly as 0 to keep the regex
behavior similar to that in Python (in Python, omitting the lower bound
is equivalent to specifying 0).
(cherry picked from commit 551f06218755076cde588c848c01ce5ca1bf5e6b)
|
|
frr: T4020: re-enable watchfrr in config as it is always running (backport #2668)
|
|
(cherry picked from commit 42614633901713e6472b43f95065d215344843b1)
|
|
dhcp: T5846: Refactor and simplify DUID definition (backport #2664)
|
|
(cherry picked from commit 5768bc2d56cc8aabd8d276a2afc30608c1bc9838)
|
|
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove
explicit call to a separate validator `ipv6-duid` and inline the regex into the
XML definition.
(cherry picked from commit 51e7832fc5c88f9956b26157a80947bad4495a4e)
|
|
Allow the HTTPS API server to start without any configured keys when GraphQL JWT auth is configured (backport #2661)
|
|
and use only PAM auth and JWT
(cherry picked from commit 495bf4732439ebd55edfbf6050af8b2064993d86)
|
|
when no API keys are set
(cherry picked from commit 7bad0e115ecc25224a0c3a2720a2697442624229)
|
|
T5798: load-balancing revese-proxy add multiple SSL certificates (backport #2590)
|
|
Add ability to configure multiple SSL certificates for
frontend/service
set load-balancing reverse-proxy service web mode http
set load-balancing reverse-proxy service web port 443
set load-balancing reverse-proxy service web ssl certificate cert1
set load-balancing reverse-proxy service web ssl certificate cert2
(cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
|
|
smoketest: bgp: T4163: use explicit kill to respawn bgpd process
|
|
T5823: Add recursive_defaults for BGP get_config dictionary (backport #2637)
|
|
(cherry picked from commit b873112dd7253b64d323e183758dbabaa0f28b6e)
|
|
(cherry picked from commit 259a3d637081fad9f86a8edb39814d8f0fbf7b95)
|
|
Add recursive_defaults values for BGP "get_config" dictionary.
(cherry picked from commit 4d5445740a1529691594263af22f2a9d07bbfe70)
|
|
image-tools: T5831: show system image reverse ordered by date (backport #2649)
|
|
(cherry picked from commit f19b2acb34e77baeae34aa156ea96d0580a61725)
|
|
T5249: Add rollback-soft feature (backport #2596)
|
|
Add the ability to rollback configs without rebooting
```
sudo /usr/bin/config-mgmt rollback_soft --rev 1
rollback-soft 1
```
(cherry picked from commit f208e9b9acaec45468295e33b113bbef6c0309a1)
|
|
T4163: Add BGP Monitoring Protocol BMP feature (backport #2627)
|
|
Add BMP feature.
BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring
data from BGP routers to network management entities
https://docs.frrouting.org/en/latest/bmp.html
Example:
set system frr bmp
commit
run restart bgp
set protocols bgp system-as '65001'
set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast
set protocols bgp neighbor 192.0.2.11 remote-as '65001'
set protocols bgp bmp mirror-buffer-limit '256000000'
set protocols bgp bmp target foo address '127.0.0.1'
set protocols bgp bmp target foo port '5000'
set protocols bgp bmp target foo min-retry '1000'
set protocols bgp bmp target foo max-retry '2000'
set protocols bgp bmp target foo mirror
set protocols bgp bmp target foo monitor ipv4-unicast post-policy
set protocols bgp bmp target foo monitor ipv4-unicast pre-policy
set protocols bgp bmp target foo monitor ipv6-unicast post-policy
set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
(cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
|
|
image-tools: T4516: revise system image tools
|
|
(cherry picked from commit 7ee9297a90625609e568394c9f5ea63e8c95a54b)
|
|
(cherry picked from commit d01aba1f5055cdaa43c8429a2c13580679ec12f7)
|
|
(cherry picked from commit d2b29be237b790bb1a258647adf30c8b96c0b526)
|
|
(cherry picked from commit 2f8b22685065f25183133431502322decede6371)
|
|
(cherry picked from commit 90f2d9865051b00290dd5b7328a046e823b658dc)
|
|
(cherry picked from commit e3cd779d0bd8dd8be6231c7b2028326a03e6a06c)
|
|
(cherry picked from commit cf83979636c686a459d6dc75dcd98e342c70b1b3)
|
|
(cherry picked from commit ea30fc962049226e869171f69c6ab1879f9e7085)
|
|
Restore scanning previous installations for config data and ssh host
keys on install.
(cherry picked from commit 32551842bb0f710f590e8c030395a3a7902aa1df)
|
|
(cherry picked from commit 393b3ccf02902e765bd5cf603d770ba8cad22e75)
|
|
(cherry picked from commit 2ccb567bba6dba69a1523daf9096ba39a18b35d1)
|
|
(cherry picked from commit 35f69340ef189e27b380074bb687ad58f29e9433)
|
|
(cherry picked from commit 0fae5b412a359874f1d61a5330064e87a7e6b899)
|
|
(cherry picked from commit bb578a1cab177e8cee6e4d02144d21387ba13a93)
|
|
(cherry picked from commit 0b97bde2cb04cf5e23350798f972abcee4bfe4ee)
|
|
(cherry picked from commit e036f783bc85e4d2bad5f5cbfd688a03a352223e)
|
|
(cherry picked from commit bd701768796d6ebb03ca943faf96d1dbea030edd)
|
|
(cherry picked from commit fc5dc00a3892fa26d03213854ea5091d6b0c2c18)
|
|
(cherry picked from commit 9ffa3e82d951756696367578dd5e82ef0f690065)
|
|
(cherry picked from commit 3d15cfd484e8c2732d9f10e4065f2282f1f5d334)
|
|
(cherry picked from commit cdc5fddfd796ccf7cfe35d2501cb1da380df53b2)
|
|
An attempt to upgrade to 1.2.x is caught, but error is of failed
checksum verification; add check and message.
(cherry picked from commit aae1247da61206d7a1b0b4d6ee20d36d194dbaba)
|