| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
VyOS 1.2 (crux) rejected prefixes other then of site /64.
[ interfaces ethernet eth0 ipv6 address eui64 2006:ab00:abe1::2/127 ]
Error: Prefix lenght is 127. It must be 64.
Same should be done on VyOS 1.3 and newer
|
|
|
|
When leaking routes to a VRF ensure that the VRF we are leaking to exists.
|
|
Re-issuing the same iproute2 commands can lead to errors, simply ignore
them and not raise a Python exception.
|
|
During assembly of the required config changes we also must move the
interfaces_removed assignemnt to an earlier stage so the value is also populated
when the entire process is removed to cleanup all remaining OSPF process assigned
interfaces.
This was yet not the case and when deleting OSPF I still got my "interface eth0"
with the area key configured.
|
|
Currently every smoketest does the setup and destruction of the configsession
on its own durin setUp(). This creates a lot of overhead and one configsession
should be re-used during execution of every smoketest script.
In addiion a test that failed will leaf the system in an unconsistent state.
For this reason before the test is executed we will save the running config
to /tmp and the will re-load the config after the test has passed, always
ensuring a clean environment for the next test.
|
|
T3356: Generic download() and upload() for dynamically dispatching appropriate transfer procedure
|
|
configd: T3411: Extend redirect_stdout to subprocesses
|
|
|
|
|
|
|
|
|
|
T3354: Add strip-private script in Python
|
|
appropriate transfer procedure
|
|
|
|
|
|
As the amount of include files now has reached a certain amount, it is getting
more and more crowsded, thuse introducing "per topic" subdirectories on the
filesystem to keep a clean structure makes sense.
|
|
As the amount of include files now has reached a certain amount, it is getting
more and more crowsded, thuse introducing "per topic" subdirectories on the
filesystem to keep a clean structure makes sense.
|
|
As the amount of include files now has reached a certain amount, it is getting
more and more crowsded, thuse introducing "per topic" subdirectories on the
filesystem to keep a clean structure makes sense.
|
|
As the amount of include files now has reached a certain amount, it is getting
more and more crowsded, thuse introducing "per topic" subdirectories on the
filesystem to keep a clean structure makes sense.
|
|
|
|
conf-mode: T2425: Add XML for policy-lists
|
|
pppoe: T3403: Fix show sessions interrupt for op-mode
|
|
VRF: support for dynamic routing protocols OSPF and BGP
|
|
|
|
We must ensure that an interface is already added to a VRF before it is
referenced inside a VRF context, e.g. OSPF.
|
|
Instead of having the dynamic routing protocols OSPF and BGP residing under
the "protocols vrf <name> [ospf|bgp]" nodes, rather move them directly under
the "vrf name <name> protocols [ospf|bgp]" node. Now all VRF related parts
are placed under the same root node.
This eases the verify steps tremendously, as we do not need to check wheter a
VRF eists or not, it will always exist as we operate under a child node.
|
|
To also have an inline reference of the guidlines for fast access, copy the
contents of the "Prepare patch/commit" and "Writing good commit messages" to
out CONTRIBUTING document.
By this you get a fast reference to the guidelines when opening up a
PullRequest.
|
|
nat66: T2518: Modify the command line description of NAT/NAT66
|
|
The helper will return a dict in form:
{'red': {'table': 1000}, 'blue': {'table': 2000}}
|
|
When including XML files they all contained a comment from where the snipped
had actually been included from. The comment had been "included start" and
"included end" instead of "include start" and "include end".
This commit corrects the glitch.
|
|
|
|
The following VyOS CLI config
vrf red {
bgp 100 {
neighbor 1.1.1.1 {
peer-group foo
}
peer-group foo {
passive
password bar
remote-as 200
}
}
}
Will generaste the FRR configuration:
!
router bgp 100 vrf red
no bgp ebgp-requires-policy
no bgp network import-check
neighbor foo peer-group
neighbor foo remote-as 200
neighbor foo password bar
neighbor foo passive
neighbor 1.1.1.1 peer-group foo
!
|
|
As the amount of include files now has reached a certain amount, this also
introduces "per topic" subdirectories on the filesystem to keep a clean
structure.
This commit is related to the change in the OSPF structure done in 952c52ef01
("vrf: ospf: T2271: re-arrange xml include building blocks").
|
|
|
|
|
|
VyOS CLI config:
vrf red {
ospf {
default-information {
originate {
always
}
}
default-metric 30
passive-interface default
}
}
Will create the FRR configuration snippet:
!
router ospf vrf red
auto-cost reference-bandwidth 100
timers throttle spf 200 1000 10000
passive-interface default
default-metric 30
default-information originate always
!
|
|
|
|
In order to fully re-use the XML based OSPF CLI definition for per-VRF routing,
the file structure needs to be reorganized and the common OSPF definition is
moved to its dedicated ospf-common-config.xml.i file, which can then be fully
re-included at the VRF level.
As the amount of include files now has reached a certain amount, this also
introduces "per topic" subdirectories on the filesystem to keep a clean
structure.
|
|
|
|
A user can specify both "set system console device ttyS0 speed '9600'" and
"set service console-server device ttyS0 speed 9600". A serial interface can
not be used multiple times.
commit now produces an error:
vyos@vyos# commit
[ service console-server ]
Port "ttyS0" requires speed to be set!
(cherry picked from commit 7620a8a1d6d20d4bf16e714a9d40b7bdfb133b39)
|
|
nat: nat66: T2518: Support operation mode command
|
|
|
|
nat66: T2518: Align the log and comment of nat66 template with nat
|
|
|
|
|
|
readme: Correct pipenv instruction to install dev packages
|
|
|
