summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-11T2588: add support for default values in the leaf node schema.Daniil Baturin
2020-06-11Add a make target for converting compact RelaxNG schemas to XML.Daniil Baturin
2020-06-11nat: T2571: fix negated port definitionsChristian Poessinger
2020-06-11nat: T2571: fix failing negated CLI configurationsChristian Poessinger
tested using: set nat destination rule 399 description 'Redirect DNS iot VLAN' set nat destination rule 399 destination address '!192.168.67.243-192.168.67.244' set nat destination rule 399 destination port '53' set nat destination rule 399 inbound-interface bond10.204 set nat destination rule 399 log set nat destination rule 399 protocol 'tcp_udp' set nat destination rule 399 translation address '192.168.67.243' set nat destination rule 399 translation port '53' set nat destination rule 400 description 'Redirect DNS lan VLAN' set nat destination rule 400 destination address '!192.168.67.243-192.168.67.244' set nat destination rule 400 destination port '53' set nat destination rule 400 inbound-interface bond10.204 set nat destination rule 400 log set nat destination rule 400 protocol 'tcp_udp' set nat destination rule 400 translation address '192.168.67.243' set nat destination rule 400 translation port '53' set nat destination rule 401 description 'Redirect DNS guest VLAN' set nat destination rule 401 destination address '!192.168.67.243-192.168.67.244' set nat destination rule 401 destination port '53' set nat destination rule 401 inbound-interface bond10.204 set nat destination rule 401 log set nat destination rule 401 protocol 'tcp_udp' set nat destination rule 401 translation address '192.168.67.243' set nat destination rule 401 translation port '53'
2020-06-11ssh: T2321: add VRF supportChristian Poessinger
2020-06-11ssh: T2321: use list over string when working with Config()Christian Poessinger
2020-06-11wwan: T2241: bugfix VRF assignmentChristian Poessinger
2020-06-11Merge branch 'serial-console' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'serial-console' of github.com:c-po/vyos-1x: console: T2569: run VGA console powersave on tty1 console: T2569: replicate console settings to grub.cfg Debian: fix warning about undefined substitution variables console: T2569: only start serial console if device exists console: T2529: migrate from ttyUSB device to new device in /dev/serial/by-bus console: T2570: remove support for Hayes Modems netconsole: T2561: use migrator to delete config nodes console: T2569: initial implementation with XML and Python
2020-06-11console: T2569: run VGA console powersave on tty1Christian Poessinger
2020-06-11console: T2569: replicate console settings to grub.cfgChristian Poessinger
2020-06-11Debian: fix warning about undefined substitution variablesChristian Poessinger
warning: Depends field of package vyos-1x: substitution variable ${shlibs:Depends} used, but is not defined warning: Depends field of package vyos-1x-vmware: substitution variable ${shlibs:Depends} used, but is not defined Remove variables from dependency list as we have explicit non architecture dependend dependencies.
2020-06-10Merge pull request #451 from zdc/T2573Christian Poessinger
BFD: T2573: Fixed show command for BFD peers
2020-06-10BFD: T2573: Fixed show command for BFD peerszsdc
As vtysh does not have a vrf option for "show bfd peer" command, the vrf part will be cut before passing a line to the vtysh.
2020-06-10Merge pull request #448 from DmitriyEshenko/1xppp09062020Christian Poessinger
1xppp09062020
2020-06-09pppoe-server: T2575: Add missing gw-ip-addressDmitriyEshenko
2020-06-09sstp: T2575: Add missing gw-ip-addressDmitriyEshenko
2020-06-09console: T2569: only start serial console if device existsChristian Poessinger
Only start console if it exists on the running system. If a user detaches a USB serial console and reboots - it should not fail!
2020-06-09console: T2529: migrate from ttyUSB device to new device in /dev/serial/by-busChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port.
2020-06-09console: T2570: remove support for Hayes ModemsChristian Poessinger
Support for Hayes modems has been long gone (1.2.x) and nobody cared. It was removed in commit d582bbaf3 ("update console settings for systemd") of vyatta-cfg-system. So as there have been zero complaints - cleanup the CLI.
2020-06-09netconsole: T2561: use migrator to delete config nodesChristian Poessinger
The current implementation only works once the system has been fully booted up and the config nodes have been process. So there is no "early" kernel debugging. It is started with priority 400 (after all network stuff) - thus it has a questionable at all for Kernel debugging. It would only make sense if the entire system is changed to supply the config stuff to the Kernel commandline and then send it to a dedicated MAC address target as network will be initialized late. As there are zero Phabricator tasks available and we do not know any user using this - the "feature" will be removed.
2020-06-09console: T2569: initial implementation with XML and PythonChristian Poessinger
Migrate the serial console subsystem to XML and Python.
2020-06-09wwan: T2529: add XML device constraintChristian Poessinger
2020-06-08Merge pull request #447 from kroy-the-rabbit/sensorsChristian Poessinger
T2559: Make the sensors automatically load necessary modules
2020-06-08T2559: Make the sensors automatically load necessary moduleskroy
2020-06-08Merge pull request #446 from DmitriyEshenko/fix-l2tp-003Christian Poessinger
l2tp: T2565: Add missing gw-ip-address
2020-06-08l2tp: T2565: Add missing gw-ip-addressDmitriyEshenko
2020-06-07op-mode: T2558: version: no need to call this with sudoChristian Poessinger
2020-06-07op-mode: T2558: version: split out CPU infoChristian Poessinger
Instead of using "show version" as catch-all command for information rather add "show system cpu" op-mode command which is analogous to "show system memory" which deals with RAM.
2020-06-07op-mode: rename version.xml -> show-version.xmlChristian Poessinger
2020-06-07wwan: T2529: harden device completion helperChristian Poessinger
Commit 1c7d7cbd39 ("wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.Z") added a new completion helper path for USB based serial interfaces. If no USB based serial port was available on the system this produced the following error: "ls: cannot access '/dev/serial/by-bus': No such file or directory" Only list USB based serial interfaces if there is at least one connected to the system.
2020-06-07Makefile: remove new XML implementations for bgp, rip, isisChristian Poessinger
Commit 886a986a122e ("isis: T2495: exclude generated nodes from package") missed calling rm -rf, instead only rm -f was called leaving the directory intact.
2020-06-07Merge branch 'udev' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'udev' of github.com:c-po/vyos-1x: usb: op-mode: T2560: display USB interface information pppoe: op-mode: T2488: retrieve log info from journalctl wwan: op-mode: T2488: retrieve log info from journalctl wwan: T2241: interface is not bond- or bridgeable wwan: T2488: remove generation of dedicated logfile wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.Z udev: T2490: add persistent USB device files
2020-06-07op-mode: T2558: fix hypervisor bug, add CPU info to "show version"kroy-the-rabbit
2020-06-07usb: op-mode: T2560: display USB interface informationChristian Poessinger
vyos@vyos:~$ show system usb /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 4, If 0, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 2, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 3, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 8, Class=Vendor Specific Class, Driver=qmi_wwan, 480M vyos@vyos:~$ show system usb serial No USB to serial converter connected vyos@vyos:~$ show system usb serial Device Model Vendor ------ ------ ------ usb0b1.3.3.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3p1.0 MC7710 Sierra Wireless, Inc. usb0b1.3p1.2 MC7710 Sierra Wireless, Inc. usb0b1.3p1.3 MC7710 Sierra Wireless, Inc. usb0b1.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd
2020-06-07pppoe: op-mode: T2488: retrieve log info from journalctlChristian Poessinger
2020-06-07wwan: op-mode: T2488: retrieve log info from journalctlChristian Poessinger
2020-06-07wwan: T2241: interface is not bond- or bridgeableChristian Poessinger
Commit 2cb806271928 ("wirelessmodem: T2241: make VRF and bond/bridge membership mutually exclusive") added some logic which is not forseen/neither makes sense on a dialup interface, thus it's removed again
2020-06-07wwan: T2488: remove generation of dedicated logfileChristian Poessinger
... all information are present in journald.
2020-06-07wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.ZChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port. vyos@vyos:~$ find /dev/serial/by-bus/ -name usb* -exec basename {} \; | sort usb0b1.3p1.0 usb0b1.3p1.2 usb0b1.3p1.3 usb0b2.4p1.0 usb0b2.4p1.1 usb0b2.4p1.2 usb0b2.4p1.3 So we have USB root 0 with bus 1.3 and port 1.0. The enumeration is constant accross reboots.
2020-06-07udev: T2490: add persistent USB device filesChristian Poessinger
During testing it was discovered that on 5 out of 10 reboots the USB enumeration/mapping from physical port to /dev/ttyUSB is different. The root cause is that it's a FIFO so first found/loaded driver module will be assigned ttyUSB0. This mixed up the serial interfaces of my FTDI chips and my connected Sierra Wireless MC7710 card which was no longer functioning as it now was mapped to a different USB interface. The solution is a udev rule which persistently maps the USB-tree-device to a device file in /dev. Wait? isn't this what /dev/serial/by-{id,path} is for? Correct, it does the very same thing but the problem is as follows: * by-path uses device file names which also incorporate the parent bus system, this results in "pci-0000:00:10.0-usb-0:2.4:1.0-port0" * by-id will overwrite the assigned device symlink if a new USB device with the same name appears. This happens to some FTDI devices with no serial number programmed so the device added last wins and will be the only one in the by-id folder - cruel world! This commit adds a new directory /dev/serial/by-bus which holds the following device files (as example): $ ls -1 /dev/serial/by-bus/ usb0b1.3p1.0 usb0b1.3p1.2 usb0b1.3p1.3 usb0b2.4p1.0 usb0b2.4p1.1 usb0b2.4p1.2 usb0b2.4p1.3
2020-06-07op-mode: T2559: add "show environment sensors" commandChristian Poessinger
vyos@vmware:~$ show environment sensors VyOS running under hypervisor, no sensors available vyos@apu4:~$ show environment sensors ath10k_hwmon-pci-0500 temp1: N/A k10temp-pci-00c3 temp1: +54.6°C (high = +70.0°C) (crit = +105.0°C, hyst = +104.0°C) fam15h_power-pci-00c4 power1: 3.28 W (interval = 0.01 s, crit = 6.00 W)
2020-06-07op-mode: version: remove unused import statementsChristian Poessinger
2020-06-07op-mode: ethernet: T2546: present offload output in tableChristian Poessinger
- remove first line from output (sed -e 1d) - remove leading tab indention (sed -e 's/^\t*//g') - remove colons (sed -e 's/://') - align output vertically (column -t -s' ')
2020-06-07op-mode: ethernet: T2546: do not display fixed offload optionsChristian Poessinger
[fixed] options returned by ethtool -k mean that they can not be change and thus offloading can neither be enabled nor disabled. It makes no sense to display those parameters at all.
2020-06-06op-mode: T2546: migrate show interfaces tunnel,input,pseudo-ethernet,l2tpv3 ...Christian Poessinger
Migrate additional show commands to XML * show interfaces tunnel ... * show interfaces input ... * show interfaces pseudo-ethernet ... * show interfaces l2tpv3 ... * show interfaces bridge ... * show interfaces vti ... * show interfaces vxlan ...
2020-06-06op-mode: ethernet: T2546: add "show interfaces loopback"Christian Poessinger
2020-06-06op-mode: add help text for "show mpls"Christian Poessinger
2020-06-06op-mode: add help text for "show protocols"Christian Poessinger
2020-06-06op-mode: rename show-arp.xml to show-protocols-static.xmlChristian Poessinger
2020-06-06dhcpv6-pd: T2551: fixup configuration pathChristian Poessinger
Commit 728b1feaf744 ("dhcpv6-pd: T2551: fix prefix length not set in config") reworked the way the configuration path is accesses on the individual interfaces, but it was missed out to apply it correctly when reading in sla-len and sla-id values.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 09:22:54 +0000