| Age | Commit message (Collapse) | Author |
|---|
|
bfd: T5967: add minimum-ttl option
|
|
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254>
* set protocols bfd profile <name> minimum-ttl <1-254>
|
|
The default `bandwidth` and `ceiling` should calculate values
based on <tag> bandwidth but currently it gets the value from
qos.base `/sys/class/net/{self._interface}/speed`
```
set qos policy shaper SHAPER bandwidth '20mbit'
set qos policy shaper SHAPER default bandwidth '95%'
set qos policy shaper SHAPER default ceiling '100%'
```
It causes wrong calculations for class `default` i.e
950Mbit for bandwidth (expected 95% of bandwidth, 19Mbit)
1Gbit for ceil (expected 100% of bandwidth, 20Mbit)
Gets incorrect values
```
r4# tc class show dev eth1
class htb 1:1 root rate 20Mbit ceil 20Mbit burst 1600b cburst 1600b
class htb 1:a parent 1:1 leaf 8053: prio 0 rate 200Kbit ceil 200Kbit burst 1Mb cburst 1600b
class htb 1:b parent 1:1 leaf 8054: prio 7 rate 950Mbit ceil 1Gbit burst 15200b cburst 1375b
```
Fix this
|
|
ethernet: T5978: hw-tc-offload does not actually get enabled on the NIC
|
|
Typo (missaligned -/_) in the code causes hw-tc-offload to never be enabled in
the underlaying hardware via ethtool.
|
|
dhcp: T5787: Allow disabled duplicates on static-mapping
|
|
A code path was missing to check if only priority is available in the result of
"ip --json -4 rule show", in the case of l3mdev it's a dedicated key!
|
|
There is no need to add and remove this table during runtime - it can lurk
in the standard firewall init code.
|
|
|
|
This prevents the following error when configuring the first VRF:
sysctl: cannot stat /proc/sys/net/vrf/strict_mode: No such file or directory
|
|
op-mode: T5969: list multicast group membership
|
|
ethernet: T4638: add smoketests verifying there are no stale VLAN interfaces left
|
|
T5957: fix removal of interface in firewall rules.
|
|
cpo@LR1.wue3:~$ show ip multicast group interface eth0.201
Interface Family Address
----------- -------- ---------
eth0.201 inet 224.0.0.6
eth0.201 inet 224.0.0.5
eth0.201 inet 224.0.0.1
cpo@LR1.wue3:~$ show ipv6 multicast group interface eth0
Interface Family Address
----------- -------- -----------------
eth0 inet6 ff02::1:ff00:0
eth0 inet6 ff02::1:ffbf:c56d
eth0 inet6 ff05::2
eth0 inet6 ff01::2
eth0 inet6 ff02::2
eth0 inet6 ff02::1
eth0 inet6 ff01::1
|
|
|
|
sflow: T5968: add VRF support
|
|
Add support to run hsflowd in a dedicated (e.g. management) VRF.
Command will be "set system sflow vrf <name>" like with any other service
|
|
Since, we don't have op-mode operation for 'dns dynamic' anymore, we need
to add a top level property to avoid empty `templates-op/update/node.def`.
|
|
Update op-mode for dynamic dns to standardize on `vyos.opmode`. All
methods of `op_mode/dns_dynamic.py` are now available in standardized
`op_mode/dns.py`.
Move op-mode command `update dns dynamic` to `reset dns dynamic` to
reflect that it is not an update but a reset of the dynamic dns service.
Also, make the help texts more consistent for all op-mode commands for
`dns dynamic` and `dns forwarding`.
|
|
|
|
|
|
|
|
Modify the dynamic dns configuration 'address' subpath for better
clarity on how the address is obtained.
Additionally, remove `web-options` and fold those options under the
path `address web`.
|
|
dns: T5959: Streamline dns forwarding service
|
|
For example, port 5353 is reserved for multicast DNS, this means tests
will fail if the host running the tests is also running a mDNS server.
|
|
Streamline configuration and operation of dns forwarding service in
following ways:
- Remove `dns_forwarding_reset.py` as its functionality is now covered
by `dns.py`
- Adjust function names in `dns.py` to disambiguate between DNS
forwarding and dynamic DNS
- Remove `dns_forwarding_restart.sh` as its functionality is inlined in
`dns-forwarding.xml`
- Templatize systemd override for `pdns-recursor.service` and move the
generated override files in /run. This ensures that the override files
are always generated afresh after boot
- Simplify the systemd override file by removing the redundant overrides
- Relocate configuration path for pdns-recursor to `/run/pdns-recursor`
and utilize the `RuntimeDirectory` default that pdns-recursor expects
- We do not need to use custom `--socket-dir` path anymore, the default
path (viz., `/run/pdns-recursor` is fine)
|
|
|
|
left
This extends commit 7ba47f027 ("ethernet: T4638: deleting parent interface does
not delete underlying VIFs") with a smoketests ensure no VIFs are left behind.
|
|
ntp: T5692: add support to configure leap second behavior
|
|
T5958: QoS add basic implementation of policy shaper-hfsc
|
|
* set service ntp leap-second [ignore|smear|system|timezone]
Where timezone is the new and old default resulting in adding "leapsectz right/UTC"
to chrony.conf. The most prominent new option is "smear" which will add
leapsecmode slew
maxslewrate 1000
smoothtime 400 0.001 leaponly
to chrony.
See https://chrony-project.org/doc/4.3/chrony.conf.html leapsecmode for
additional information
|
|
T5961: Fix QoS policy shaper class match vif
|
|
If we have QoS policy shaper class match `vif` (VLAN) we have to
use `basic match "meta(vlan mask 0xfff eq xxx)` instead of
`action policy`
Actual incorrect TC filter:
tc filter add dev eth1 parent 1: protocol all prio 1 action police rate 100000000 burst 15k flowid 1:64
The correct TC filter after fix:
tc filter add dev eth1 parent 1: protocol all prio 1 basic match "meta(vlan mask 0xfff eq 100)" flowid 1:64
|
|
T5964: add missing imports for is_wwan_connected()
|
|
|
|
T5963: Fix QoS shaper rate calculations and set default 1Gbit
|
|
dhcp: T5948: Strip trailing dot, detect if hostname is FQDN
|
|
|
|
|
|
This extends commit 2c3e4696b3e22 ("T2267: Versioning: Update version tag from
GIT repo") to also include release tags.
|
|
It is impossible to detect interface speed for some devices
for exmaple virtio interfaces:
```
vyos@r4:~$ cat /sys/class/net/eth1/speed
-1
```
It causes wrong negative calcultaions like:
- bandwidth: -1000000
- 4% of bandwidth: -40000
tc class replace dev eth1 parent 1: classid 1:1 htb rate -1000000
tc class replace dev eth1 parent 1:1 classid 1:a htb rate -40000
Fix this with checking negative value.
Add default interface speed to 1000 Mbit if we cannot detect the
interface speed, the current default value 10 Mbit is too low
for nowadays
|
|
|
|
|
|
dhcp: T5952: Fix validate duplicate MAC Address on same subnet
|
|
|
|
QoS policy shaper-hfsc was not implemented after rewriting the
traffic-policy to qos policy. We had CLI but it does not use the
correct class. Add a basic implementation of policy shaper-hfsc.
Write the class `TrafficShaperHFS`
|
|
ethernet: T4638: deleting parent interface does not delete underlying VIFs
|
|
|
|
xml: T5738: re-use source-address-ipv4-ipv6 building block for config-management
|
|
|
