Age | Commit message (Collapse) | Author |
|
As there has been no route to the configured syslog servers, smoketests produced:
rsyslogd: omfwd: socket 8: error 101 sending via udp: Network is unreachable
Rather use some fake syslog servers from 127.0.0.0/8 which are directly
connected and we do not need to look up a route, which will suppress the above
error message.
(cherry picked from commit 744ecfe60ed3633775feeb3da767a88709fd626c)
|
|
vxlan: T6505: Support VXLAN VLAN-VNI range mapping in CLI (backport #3756)
|
|
(cherry picked from commit 115e99630a317cab62c6f99e0461f6ce2c1edaf3)
|
|
smoketest: T6425: fix wireless smoketest CLI from invalid backport
|
|
interface: T6592: remove interface from conntrack ct_iface_map on deletion (backport #3857)
|
|
New CLI syntax got backported via commit 6fb600f3c ("wireless: T6320: add
802.11ax at 6GHz")
Revert back to the stable CLI syntax in the 1.4 (sagitta) release.
|
|
deletion
Now that interfaces are deleted from ct_iface_map during deletion it's time to
also add a smoketest ensuring there is no entry in the ct_iface_map once an
interface was deleted from the CLI.
(cherry picked from commit 1c42ee9d16dd49fff2cbde652bf24a38f364526c)
|
|
We always have had stale interface entries in the ct_iface_map of nftables/
conntrack for any interface that once belonged to a VRF.
This commit will always clean the nftables interface map when the interface
is deleted from the system.
(cherry picked from commit 17c12bde5c6f314311e7524842fd1ddc254009b4)
|
|
T6599: ipsec: support disabling rekey of CHILD_SA, converge and fix defaults (backport #3841)
|
|
T6594: Add missed pppd_compat module (backport #3832)
|
|
smoketest: T6600: ospf: enable MPLS LDP on dummy interfaces (backport #3838)
|
|
op_mode: T6593: Release DHCP interface does not work (backport #3861)
|
|
vrf: T6602: verify supplied VRF name on all interface types (backport #3856)
|
|
Only some (e.g. ethernet or wireguard) interfaces validate if the supplied VRF
actually exists. If this is not validated, one can pass an invalid VRF to the
system which generates an OSError exception.
To reproduce
set interfaces vxlan vxlan1 vni 1000
set interfaces vxlan vxlan1 remote 1.2.3.4
set interfaces vxlan vxlan1 vrf smoketest
results in
OSError: [Errno 255] failed to run command: ip link set dev vxlan1 master smoketest_mgmt
This commit adds the missing verify_vrf() call to the missing interface types
and an appropriate smoketest for all interfaces supporting VRF assignment.
(cherry picked from commit dd0ebffa33728e452ac6e11737c2283f0e390359)
|
|
wireless: T6597: improve hostapd startup and corresponding smoketests (backport #3833)
|
|
(cherry picked from commit 92461c35c7ef131940c885aca894a2d8b3c89592)
|
|
(cherry picked from commit 71926f64385d7ab66431c60afa1fc8554ad7e2dc)
|
|
This was found during smoketesting as thoase started to repeadingly fail in the last weeks
File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_wireless.py", line 534, in test_wireless_security_station_address
self.assertTrue(process_named_running('hostapd'))
AssertionError: None is not true
Digging into this revealed that this is NOT related to the smoketest coding but
to hostapd/systemd instead. With a configured WIFI interface and calling:
"sudo systemctl reload-or-restart hostapd@wlan1" multiple times in a short
period caused systemd to report:
"Jul 18 16:15:32 systemd[1]: hostapd@wlan1.service: Deactivated successfully."
According to the internal systemd logic used in our version this is explained by:
/* If there's a stop job queued before we enter the DEAD state, we shouldn't act on Restart=, in order to not
* undo what has already been enqueued. */
if (unit_stop_pending(UNIT(s)))
allow_restart = false;
if (s->result == SERVICE_SUCCESS)
s->result = f;
if (s->result == SERVICE_SUCCESS) {
unit_log_success(UNIT(s));
end_state = SERVICE_DEAD;`
Where unit_log_success() generates the log message in question.
Improve the restart login in the wireless interface script and an upgrade to
hostapd solved the issue.
(cherry picked from commit a67f49d99eda00998c425f9a663e138dbd0f7755)
|
|
(cherry picked from commit 8bf6687b5276589e64988c3c54dbf61a628ee2a0)
|
|
(cherry picked from commit f6485f7df8713298d81ec0d45c548417db111523)
|
|
(cherry picked from commit 11b273108d78ab1588be3c077f40b2ac876369a4)
|
|
(cherry picked from commit 8c8054ad5410e8aedf6ab7a0702b317872d4fd41)
|
|
(cherry picked from commit 440a3e6b89748bfd861f580fc8c4f41b58c6cec2)
|
|
(cherry picked from commit ef50cd9954a2d6eb2a041c26a0bb8ea0758b1f17)
|
|
(cherry picked from commit b92bc209cc1d6ed54a5fa052e0c27c54488ae955)
|
|
wireless: T6320: Add 802.11ax at 6GHz to VyOS (backport #3524)
|
|
Authored-By: Alain Lamar <alain_lamar@yahoo.de>
(cherry picked from commit d5e988ba2d0fa0189feff22374c9b46eb49e2e79)
|
|
Commit e3c71af1466 ("remove secrets file if the tunnel is deleted and fix
opmode commands") added a code path into verify() which removed files on the
system if TOTP was not defined.
This commit moves the code path to the appropriate generate() function.
(cherry picked from commit 40c835992db9217f48e54dbbf15a7fbf1dcba482)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
* wireless: T6425: Fix broken VHT beamforming
(cherry picked from commit f75f0f9c94472f46e056808c3ac6aba809c090f0)
* wireless: T6425: Add smoketests for VHT beamforming
(cherry picked from commit 578fbe0eb436697132e5a738fec5a4ac61ced8da)
* wireless: T6425: adjust to latest country-code changes
Commit 9e22ab6b2a ("wireless: T6318: move country-code to a system wide
configuration") removed the per wifi interface setting for a country-code. This
commit adjust the smoketests to the new design.
(cherry picked from commit 312273c9569d973c510d871adb941709804d8868)
---------
Co-authored-by: Alain Lamar <alain_lamar@yahoo.de>
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
interfaces: T6592: moving an interface between VRF instances failed (backport #3834)
|
|
(cherry picked from commit 23a3419d512139650cfe3dc76759b370b0c0c3d6)
|
|
Also adds support for life_bytes, life_packets, and DPD for
remote-access connections. Changes behavior of remote-access esp-group
lifetime setting to have parity with site-to-site connections.
(cherry picked from commit fd5d7ff0b4fd69b248ecb29c6ec1f3cf844c41cf)
|
|
Remove unused import (left over) from commit 36f3791e0 ("utils: migrate to new
get_vrf_tableid() helper")
(cherry picked from commit b551f542c5c906c901e3be37ad3fd68c8248473d)
|
|
Commit 452068ce7 ("interfaces: T6592: moving an interface between VRF instances
failed") introduced a new helper to retrieve the VRF table ID from the Kernel.
This commit migrates the old code path where the individual fields got queried
to the new helper vyos.utils.network.get_vrf_tableid().
(cherry picked from commit 36f3791e0c15267483d59a3bb74465811d08df88)
|
|
To reproduce:
set vrf name mgmt table '150'
set vrf name no-mgmt table '151'
set interfaces ethernet eth2 vrf 'mgmt'
commit
set interfaces ethernet eth2 vrf no-mgmt
commit
This resulted in an error while interacting with nftables:
[Errno 1] failed to run command: nft add element inet vrf_zones ct_iface_map { "eth2" : 151 }
The reason is that the old mapping entry still exists and was not removed.
This commit adds a new utility function get_vrf_tableid() and compares the
current and new VRF table IDs assigned to an interface. If the IDs do not
match, the nftables ct_iface_map entry is removed before the new entry is added.
(cherry picked from commit 452068ce78581bb6fba2df4dba197e95b9aeb33d)
# Conflicts:
# python/vyos/ifconfig/interface.py
# python/vyos/utils/network.py
|
|
T6578: Fix unhandled exception in "show openconnect-server sessions" (backport #3828)
|
|
(cherry picked from commit e858d96a3fbc1ae4719a50ee67df02b2f256b40f)
|
|
T6523: Telegraf use nft scripts only if the firewall configured (backport #3748)
|
|
configdep: T6559: fix regression in dependent script error under configd (backport #3813)
|
|
If a firewall is not configured there is no reason to get and
execute telegraf firewall custom scripts as there are no nft
chain in the firewall nftables configuration
(cherry picked from commit ebff0c481907ac0c2c0be9981c3c3d87caf3003b)
|
|
(cherry picked from commit ad43aa885a8ef689da212088d6ebb37c32d72883)
|
|
(cherry picked from commit 52d08b1ec5b2943744daac7123e35fd415f85db2)
|
|
(cherry picked from commit 7249d10f1fbb3f90a4bdbcd0223926d0380ddd3a)
|
|
op-mode: T6575: add support for NTP service restart via CLI (backport #3810)
|
|
This seemed to be arround in the early days, but is not available since at
least VyOS 1.3.3. Add CLI helper to restart the NTP process (chrony).
(cherry picked from commit ca4f4343999bdbd8450ef952f42062877d6f3bab)
|
|
op-mode: T6566: add support for listing all interfaces in "monitor bandwidth" (backport #3805)
|
|
Right now we can only monitor the bandwidth for one individual interface, but
not all at once. This adds support to monitor all interfaces.
(cherry picked from commit 7704af0c4454725e8c67138e5cabab3328bde0f8)
|
|
T6564: workflow trigger restriction for sagitta
|
|
|
|
op-mode: T6537: remove unused cmd imported from vyos.utils.process (backport #3791)
|