Age | Commit message (Collapse) | Author |
|
op mode: T5582: Add 'force ntp synchronization' (backport #2262)
|
|
T5586: Disable by default SNMP for Keeplived VRRP service (backport #2273)
|
|
AgentX does not work stable. From time to time we see the system
service crashing/degrading if something is wrong with SNMP from
util net-snmp.
We should disable it by default and enable it only if configured.
set high-availability vrrp snmp
(cherry picked from commit 47875457cd8b176f7f23a3141175d745aeb14d8a)
|
|
frr: T5239: fix process startup order (backport #2245)
|
|
(cherry picked from commit c27b0ca1816bc9fcbb88b05ae3193d765b798d81)
|
|
(cherry picked from commit 8e5931c94a4ee409424ba092777a1a9ce03768d7)
|
|
T671: do not preserve old tech-support report implementation (backport #2260)
|
|
op-mode: T5581: add "show ip nht" command (IPv4 nexthop tracking table) (backport #2257)
|
|
T5480: Ability to disable SNMP for keepalived service VRRP
|
|
T5576: Add BGP remove-private-as all option (backport #2252)
|
|
(cherry picked from commit d1ec84877f8ca0a78f1ab37d21ff43d212644fd6)
|
|
Add the ability to use the option all for remove-private-as.
Remove private ASNs in outbound updates.
all - Apply to all AS numbers
set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all
(cherry picked from commit d72024b11e127cc11931cfaee4d07944dceb1ea9)
|
|
vyos@vyos:~$ show ip nht
172.18.254.202
resolved via ospf
via 172.18.201.254, eth0.201 (vrf default), weight 1
Client list: bgp(fd 28)
(cherry picked from commit 138e60831842ea9366655fde7acf929d8c9f645b)
|
|
(cherry picked from commit d4b9b2aa5f5dda6a11b7038ab0ab52653531183d)
|
|
- Reuse existing utility functions to check if a boot is ongoing
(boot_configuration_complete())
- Run system_frr.py script to configure FRR daemon before initial launch
- Add safety net to always have FRR running on the system
This does yet not solve the error in T5239 but it's a small step towards
the solution.
(cherry picked from commit df74a09b80df0c2ec769a10ef4f7bac01f50eb2d)
|
|
T3655: Fix NAT problem with VRF
|
|
T5562: Cleanup netns for smoketest load-balancing wan
|
|
Cleanup nets for the smoketest load-balancing
Remove deleting container interfaces from default netns as those
interfaces leave inly in netns.
(cherry picked from commit 849499f44f6e50c591e250cf40b5ab0115839b53)
|
|
T5564: Fix show firewall group and show firewall summary (backport #2235)
|
|
The `rule` key could be not exists in the entry of the dictionary
for examppe `{'default_action': 'drop'}`
Fix it
(cherry picked from commit 9daac1632df96b6d2089244e3c7a7b42ae682eb9)
|
|
config-mgmt: T5353: normalize archive updates and commit log entries
|
|
(cherry picked from commit af398c51f7d06cdf582b347a35b1e5c867aaea58)
|
|
(cherry picked from commit e46afa2c58eea2d81df84e2630a6f346f1f51c2a)
|
|
T5533: Fix for vrrp dict key if virtual-server is used
|
|
Linux netfilter patch https://patchwork.ozlabs.org/project/netfilter-devel/patch/d0f84a97f9c86bec4d537536a26d0150873e640d.1439559328.git.daniel@iogearbox.net/
adds direction support for conntrack zones, which makes it possible to
do NAT with conflicting IP address/port tuples from multiple, isolated tenants on a host.
According to the description of the kernel patch:
> ... overlapping tuples can be made unique with the zone identifier in
original direction, where the NAT engine will then allocate a unique
tuple in the commonly shared default zone for the reply direction.
I did some basic tests in my lab and it worked fine to forward packets
from eth0 to pppoe0.
- eth0 192.168.1.1/24 in VRF red
- pppoe0 dynamic public IP from ISP VRF default
- set vrf name red protocols static route 0.0.0.0/0 interface pppoe0 vrf 'default'
- set protocols static route 192.168.1.0/24 interface eth0 vrf 'red'
`conntrack -L` shows something like:
```
tcp 6 113 ESTABLISHED src=192.168.1.2 dst=1.1.1.1 sport=58946 dport=80 zone-orig=250 packets=6 bytes=391 src=1.1.1.1 dst=<my-public-ip> sport=80 dport=58946 packets=4 bytes=602 [ASSURED] mark=0 helper=tns use=1
```
It would be much appreciated if someone could test this with more
complex VRF setup.
|
|
webproxy service
(cherry picked from commit 4401c6920fed08050832a00041021137e9efae54)
|
|
Revert "Create build.yml"
|
|
This reverts commit 7a99a59b338fecd73d34819a0a95646c054a0f12.
SonarCloud is not configured for now properly. Revert this
commit until we confiugre all properly if we'll use it in
the future.
(cherry picked from commit a0e3d29ee33e6c5b773e29ccd5a226e7f6c3bfd1)
|
|
container: T5563 Fix environment replaced by label
|
|
(cherry picked from commit 79a46675b031a4edc0ea925a45066077c0804b9b)
|
|
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when
working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI
is configured against a container VXLAN interface which is referred to as a
'Single VXLAN device (SVD)'.
Multiple VLAN to VNI mappings can be configured against the same SVD. This
allows for a significant scaling of the number of VNIs since a separate VXLAN
interface is no longer required for each VNI.
Sample configuration of SVD with VLAN to VNI mappings is shown below.
set interfaces bridge br0 member interface vxlan0
set interfaces vxlan vxlan0 external
set interfaces vxlan vxlan0 source-interface 'dum0'
set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010'
set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011'
set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030'
set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
(cherry picked from commit 7f6624f5a6f8bd1749b54103ea5ec9f010adf778)
|
|
T5489: Add sysctl TCP congestion control by default to BBR
|
|
T5423: Fix for op-mode show vpn ike secrets
|
|
T5554: Disable sudo for PAM RADIUS
|
|
Disable sudo for PAM RADIUS template that slows down the CLI commands
To fix it add:
session [default=ignore success=2] pam_succeed_if.so service = sudo
(cherry picked from commit 01b30eb6d83cdb2ae43b956d29ac7ac1d4445776)
|
|
We don't use ipsec.secrets anymore
Fix op-mode for "show vpn ike secrets".
Ability to get "RAW" format
(cherry picked from commit 97326920e2907bdb545853887dc54c6a02b76f28)
|
|
(cherry picked from commit fd5517b38191f5bb5897912ef62f5a8d1156b7b3)
|
|
The legacy config-mgmt/save-config tools had an abiding bug that would
raise an error if comparing/reading the init archive; this is no longer
an issue.
(cherry picked from commit 52e4b4431ef440f0cffb570ca61c428c78699ee6)
|
|
(cherry picked from commit 730e744931e4ccc1f214d3e5bff0e6a2e589fd50)
|
|
(cherry picked from commit 73e317bee57c03b719019daabd578842d912b761)
|
|
Add by default sysctl TCP congestion control to BBR.
Default value `cubic` is not optimal.
net.core.default_qdisc=fq
net.ipv4.tcp_congestion_control=bbr
(cherry picked from commit b99ed37dd1cff3310437ff8ccf1a27cd20714c41)
|
|
save-config: T5551: check if None before write, as is the case at boot
|
|
system: T5555: Fix time-zone migrator changing valid time-zones to UTC
|
|
|
|
When using `virtual-server` alongside Keepalived, there can be
situations where the `vrrp` key is completely unused.
(cherry picked from commit 5f2926cf04e8a569bb25cd4121179d12b9e04c6c)
|
|
By default we enable `--snmp` for keepalived unit service
Add ability to disable it
set high-availability vrrp disable-snmp
(cherry picked from commit 5ae730a52de2f284e45cd433bb0cf66c8508f2f7)
|
|
T5548: Fix load-balancing reverse-proxy timeouts
|
|
T2958: Refactor DHCP-server systemd unit and lease
|
|
By default haproxy uses timeouts in millisecond but we set timeouts
in seconds from CLI
Fix template to use 'seconds' units
(cherry picked from commit 257019520c49c20824b7e5cad01d2d29ef5f62e6)
|
|
Render isc-dhcp-server systemd unit from configuration
|