summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-11Merge pull request #2793 from sarthurdev/T5550_sagittaChristian Breunig
interface: T5550: Interface source-validation priority over global value (backport)
2024-01-10Merge pull request #2795 from vyos/mergify/bp/sagitta/pr-2786Daniil Baturin
image-tools: T5917: annotate image list with (running)/(default boot) (backport #2786)
2024-01-10image-tools: T5917: annotate image list with (running)/(default boot)John Estabrook
(cherry picked from commit 17a1d31299e8960d9eba528e04c418b4c1007eb2)
2024-01-10dhcp: T5787: Prevent duplicate IP addresses on static mappingssarthurdev
2024-01-10Merge pull request #2792 from vyos/mergify/bp/sagitta/pr-2791Viacheslav Hletenko
T5918: Fix typo in verify vpn ipsec interface (backport #2791)
2024-01-10T5918: Fix typo in verify vpn ipsec interfaceViacheslav Hletenko
The correct CLI command is `interface` and not `interfaces` ``` set vpn ipsec interface xxx ``` (cherry picked from commit 8452d8f49216d224bc5d5751354414274982f5be)
2024-01-10Merge pull request #2788 from vyos/mergify/bp/sagitta/pr-2787Viacheslav Hletenko
bgp: T5913: allow peer-group support for ipv4|6-labeled-unicast SAFI (backport #2787)
2024-01-10T5688: Changed 'range' to multi in 'client-ip-pool' for accell-pppaapostoliuk
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp services. Added completionHelp to default-pool and next-pool. Fixed verification in vpn l2tp config script. (cherry picked from commit 4ffec67d04670192d9b722353cbaef04cb0ba129)
2024-01-10Merge pull request #2782 from vyos/mergify/bp/sagitta/pr-2780Christian Breunig
T5916: Added segment routing check for index size and SRGB size (backport #2780)
2024-01-10bgp: T5913: allow peer-group support for ipv4|6-labeled-unicast SAFIChristian Breunig
(cherry picked from commit f1411240c6b11ec400ac0f66eb71982259204317)
2024-01-10T5916: Added segment routing check for index base size and SRGB base sizeCheeze_It
(cherry picked from commit cfb5b052c84ffba789d61a59350676b6b4a0a5f7)
2024-01-10Merge pull request #2783 from vyos/mergify/bp/sagitta/pr-2263Christian Breunig
T5530: isis: Adding loop free alternate feature (backport #2263)
2024-01-10Merge pull request #2781 from vyos/mergify/bp/sagitta/pr-2773Christian Breunig
https: T5902: remove virtual-host configuration (backport #2773)
2024-01-10T5530: isis: Adding loop free alternate featureCheeze_It
(cherry picked from commit 7a2b70bd73c8579a885348b93b8addfb20fb006c)
2024-01-10boot-config-loader: T1622: add missing groups to failsafe userChristian Breunig
This extends commit 86d1291ec5 ("[boot-config-loader] T1622: Add failsafe and back trace") and adds missing groups to the vyos user. Without this change the vyos user will only have operator (vyos@vyos>) privileges, even if this level is discontinued. One could hack himself up as the user has sudo rights, but rather place the user in the right groups from the beginning. NOTE: This user is only added if booted with "vyos-config-debug" and an error when the configuration can not be loaded at all. (cherry picked from commit 07e802a2d3f98cdf29928bf321cc8b89cb41766c)
2024-01-10pki: T5911: fix service update algorithm if certificate name contains a ↵Christian Breunig
hyphen (-) When testing for changed PKI certificates using node_changed(), we should not use key_mangling=('-', '_'), as this will make certificate updates with a hypen not possible. (cherry picked from commit fc6926fdf32a7bdf9f943c7818ee6ea4a8131fba)
2024-01-10https: T5902: remove virtual-host configurationChristian Breunig
We have not seen the adoption of the https virtual-host CLI option. What it did? * Create multiple webservers each listening on a different IP/port (but in the same VRF) * All webservers shared one common document root * All webservers shared the same SSL certificates * All webservers could have had individual allow-client configurations * API could be enabled for a particular virtual-host but was always enabled on the default host This configuration tried to provide a full webserver via the CLI but VyOS is a router and the Webserver is there for an API or to serve files for a local-ui. Changes Remove support for virtual-hosts as it's an incomplete and thus mostly useless "thing". Migrate all allow-client statements to one top-level allow statement. (cherry picked from commit d0d3071e99eb65edb888c26ef2fdc9e038438887)
2024-01-08Merge pull request #2774 from vyos/mergify/bp/sagitta/pr-2758Christian Breunig
pki: T5886: add support for ACME protocol (LetsEncrypt) (backport #2758)
2024-01-08smoketest: T5905: always delete pki in ipsec test startupChristian Breunig
(cherry picked from commit 2095eb75a2326b8f493944aef07f65b150cfbc60)
2024-01-08ipsec: T5905: use interface_exists() wrapper over raw calls to os.path.exists()Christian Breunig
(cherry picked from commit 410458c00e6202dd9a5c52b3c5ac00a90db5bc53)
2024-01-08pki: T5905: do not use expand_nodes=Diff.ADD|Diff.DELETE) in node_changed()Christian Breunig
This fixes a priority inversion when doing initial certificate commits. * pki subsystem is executed with priority 300 * vti uses priority 381 * ipsec uses priority 901 On commit pki.py will be executed first, detecting a change in dependencies for vpn_ipsec.py which will be executed second. The VTI interface was yet not created leading to ConfigError('VTI interface XX for site-to-site peer YY does not exist!') The issue is caused by this new line of code in commit b8db1a9d7ba ("pki: T5886: add support for ACME protocol (LetsEncrypt)") file src/conf_mode/pki.py line 139 which triggers the dependency update even if a key is newly added. This commit changes the "detection" based on the cerbot configuration on disk. (cherry picked from commit 9162631f12ade65392ea2fa53642ea4af39627c7)
2024-01-08https: T5886: migrate https certbot to new "pki certificate" CLI treeChristian Breunig
(cherry picked from commit 9ab6665c80c30bf446d94620fc9d85b052d48072)
2024-01-08pki: T5886: add op-mode commands for log and renewalChristian Breunig
* show log certbot * monitor log certbot * renew certbot (cherry picked from commit 9d02d32319f9328df618910a038ef580588e13c8)
2024-01-08pki: T5886: add support for ACME protocol (LetsEncrypt)Christian Breunig
The "idea" of this PR is to add new CLI nodes under the pki subsystem to activate ACME for any given certificate. vyos@vyos# set pki certificate NAME acme Possible completions: + domain-name Domain Name email Email address to associate with certificate listen-address Local IPv4 addresses to listen on rsa-key-size Size of the RSA key (default: 2048) url Remote URL (default: https://acme-v02.api.letsencrypt.org/directory) Users choose if the CLI based custom certificates are used set pki certificate EXAMPLE acme certificate <base64> or if it should be generated via ACME. The ACME server URL defaults to LetsEncrypt but can be changed to their staging API for testing to not get blacklisted. set pki certificate EXAMPLE acme url https://acme-staging-v02.api.letsencrypt.org/directory Certificate retrieval has a certbot --dry-run stage in verify() to see if it can be generated. After successful generation, the certificate is stored in under /config/auth/letsencrypt. Once a certificate is referenced in the CLI (e.g. set interfaces ethernet eth0 eapol certificate EXAMPLE) we call vyos.config.get_config_dict() which will (if with_pki=True is set) blend in the base64 encoded certificate into the JSON data structure normally used when using a certificate set by the CLI. Using this "design" does not need any change to any other code referencing the PKI system, as the base64 encoded certificate is already there. certbot renewal will call the PKI python script to trigger dependency updates. (cherry picked from commit b8db1a9d7baf91b70c1b735e58710f1e2bc9fc7a) # Conflicts: # debian/control
2024-01-08Merge pull request #2772 from vyos/mergify/bp/sagitta/pr-2760Christian Breunig
image: T5898: fix kernel-level partition rescan (backport #2760)
2024-01-08image: T5898: fix kernel-level partition rescanMatt Clauson
This fix moves from partprobe to partx to rescan the partition table on an affected disk. (cherry picked from commit f883455d9a3081780c43426ab26de9d26f24c9aa)
2024-01-08Merge pull request #2771 from nicolas-fort/T5896Christian Breunig
T5896: firewall: backport interface validator for firewall rules.
2024-01-08T5896: firewall: backport interface validator for firewall rules.Nicolas Fort
2024-01-07Merge pull request #2770 from vyos/mergify/bp/sagitta/pr-2769Viacheslav Hletenko
smoketest: T5195: fix BasicInterfaceTest tearDown() timeout penalty (backport #2769)
2024-01-07smoketest: T5195: fix BasicInterfaceTest tearDown() timeout penaltyChristian Breunig
Commit ad9bdfc24 ("T5195: add timeout argument to process_named_running()") added a 2*10 seconds penalty for every interface test (dhcp and dhcpv6). This leads to long runs of "make test" after an ISO build. There is no need to wait 10 seconds for a test that checks for a process not running. The timeout is there to give the process some time to startup. (cherry picked from commit 041db49533d57cabfccd319492b85ee0bafdd40c)
2024-01-07Merge pull request #2767 from vyos/mergify/bp/sagitta/pr-2764Christian Breunig
T5195: add timeout argument to process_named_running() (backport #2764)
2024-01-07Merge pull request #2766 from vyos/mergify/bp/sagitta/pr-2765Viacheslav Hletenko
op-mode: T5904: add "show ipv6 route vrf <name> <prefix>" command (backport #2765)
2024-01-07T5195: add timeout argument to process_named_running()Christian Breunig
Smoketests heavily rely on process_named_running() so in order to "relax" system constraints during a test we will add a timeout of 10 seconds for every testcase provided by base_interfaces_test.py (cherry picked from commit ad9bdfc248cf47b3361bd0e5d7371d56131160a0)
2024-01-07op-mode: T5904: add "show ipv6 route vrf <name> <prefix>" commandChristian Breunig
We've always had a command to display discrete IPv6 routes/prefixes within the global VRF. This commit also adds support for a discrete VRF. vyos@vyos:~$ show ipv6 route vrf <name> Possible completions: <Enter> Execute the current command <h:h:h:h:h:h:h:h> Show IPv6 routes of given address or prefix <h:h:h:h:h:h:h:h/x> (cherry picked from commit 119d94bdb05d0c88bfc452d903e64000b278c43e)
2024-01-06Merge pull request #2763 from vyos/mergify/bp/sagitta/pr-1637Christian Breunig
openvpn: T3214: fix server-ipv6 and nopool handling (backport #1637)
2024-01-06Merge pull request #2762 from vyos/mergify/bp/sagitta/pr-2761Viacheslav Hletenko
dns: T5900: fix smoketests for serve-stale-extension and exclude-throttle-address (backport #2761)
2024-01-06smoketests: drop nopool/net30 from testcasesChristian Breunig
After commit 0ccbbca01b ("openvpn: T3214: specify nopool on --server line only if needed") that removed the net30 option and nopool smoketests needed a fix. (cherry picked from commit 455943cd7f759a5a3fc53d421b479044730d1f08)
2024-01-06openvpn: T3214: specify nopool on --server line only if neededAntonio Quartulli
The --server directive will already create a pool automatically. For this reason noppol should be used only when an explicit client-ip-pool was configured by the user. If that's not the case, then the nopool flag should not be specified and no manual pool should be configured. Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> (cherry picked from commit 0ccbbca01b22232b5cba63d64ab00eb54af7b068)
2024-01-06openvpn: T3214: warn when setting nopool and server-ipv6 is being usedAntonio Quartulli
Currently OpenVPN does not allow having an IPv6 subnet if 'nopool' was specified on the --server directive. For this eason warn if this specific configuration is being hit. This is probably something that should be fixed upstream, but for now we can't allow this combination of parameters. Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> (cherry picked from commit 7a0e40ce8df386c0ea2de84bce8fb6c81a0353ce)
2024-01-06openvpn: T3214: allow configuring server with v6 onlyAntonio Quartulli
Starting with v2.5.0 OpenVPN allows configuring a server with an IPv6 only tunnel. For this reason there is no need to depend on the existence of an IPv4 subnet anymore. Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> (cherry picked from commit 3072e507eb1cdc18cfe5429fd0c03d223d2576fe)
2024-01-06dns: T5900: fix smoketests for serve-stale-extension and ↵Christian Breunig
exclude-throttle-address This fixes commit 199ceb1f0a ("dns: T5900: add dont-throttle-netmasks and serve-stale-extensions powerdns features") where after the latest review round the Jinja2 template was inconsitently changed and smoketests were not re-run. (cherry picked from commit 9baeafa890f7b1d3829df633322fb4288e9ea882)
2024-01-06Merge pull request #2759 from vyos/mergify/bp/sagitta/pr-2757Christian Breunig
T5900 dns forwarding: reliability improvements (backport #2757)
2024-01-06dns: T5900: add dont-throttle-netmasks and serve-stale-extensions powerdns ↵fvlaicu
features (cherry picked from commit 199ceb1f0a820c838dea6862371a3121b3d9f3a9)
2024-01-05Merge pull request #2755 from vyos/mergify/bp/sagitta/pr-2694Viacheslav Hletenko
T5169: nat: add option to map network and ports. (backport #2694)
2024-01-04T5159: nat: add option to map network and ports. Feature used for large ↵Nicolás Fort
deployments in cgnat. (#2694) (cherry picked from commit 3fc76505d0642c32a3eae9c0ce6ab3dd2ec32dbd)
2024-01-04Merge pull request #2753 from vyos/mergify/bp/sagitta/pr-2752Christian Breunig
T5897: frr should be stopped before vyos-router (backport #2752)
2024-01-04Merge pull request #2754 from vyos/mergify/bp/sagitta/pr-2749Christian Breunig
smoketests: T5887: remove IXGB driver (backport #2749)
2024-01-04smoketests: T5887: remove IXGB driverChristian Breunig
From Kernel commit e485f3a6eae0 ("ixgb: Remove ixgb driver") There are likely no users of this driver as the hardware has been discontinued since 2010. Remove the driver and all references to it in documentation. (cherry picked from commit 8eabba331f2615a284348b70a9ef3dd49e15f76d)
2024-01-04T5897: frr should be stopped before vyos-routerDate Huang
Signed-off-by: Date Huang <tjjh89017@hotmail.com> (cherry picked from commit 6d16ab081b70bc4ea837b66dfe032ec6bdb563d7)
2024-01-04Merge pull request #2751 from vyos/mergify/bp/sagitta/pr-2750Christian Breunig
configdict: T5894: add get_config_dict() flag with_pki (backport #2750)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 10:03:29 +0000