Age | Commit message (Collapse) | Author |
|
|
|
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send
packets of no more than n bytes. The value of n must be between 128 and 16384,
the default was always 1492 to match PPPoE MTU.
A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256
bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280.
CLI:
set interfaces pppoe pppoe0 mru 1280
|
|
init: T5577: clear mandatory and optional RADIUS/TACACS PAM settings
|
|
login: T5521: home directory owner changed during reboot
|
|
T5436: Add missing preconfig-script
|
|
During system startup the system-login.py script is invoked by vyos-router
systemd service. As there is no complete configuration available at this
point in time - and the sole purpose of this call is to reset/re-render
the system NSS/PAM configs back to default - it accidently also deleted the
local useraccounts.
Once the VyOS configuration got mounted, users got recreated in alphabetical
order and thus UIDs flipped and the /home suddenely belonged to a different
account.
This commit prevents any mangling with the local userdatabase during VyOS
bootup phase.
|
|
This complements commit 5181ab60bb ("RADIUS: T5577: Added 'mandatory' and
'optional' modes for RADIUS") and commit 1c804685d0 ("TACACS: T5577: Added
'mandatory' and 'optional' modes for TACACS+"). As those new services
should also be cleaned during system boot.
|
|
login: T5628: fix spwd deprecation warning
|
|
If ethernet interface is a bond memeber:
1. Allow for changing only specific parameters which are specified
in EthernetIf.get_bond_member_allowed_options function.
2. Added inheritable parameters from bond interface to ethernet
interface which are scpecified
in BondIf.get_inherit_bond_options.
Users can change inheritable options under ethernet interface
but in commit it will be copied from bond interface.
3. All other parameters are denied for changing.
Added migration script. It deletes all denied parameters under
ethernet interface if it is a bond member.
|
|
vyos@vyos:~$ show system login users
Username Type Locked Tty From Last login
---------- ------ -------- ----- ------------- ------------------------
vyos vyos False pts/0 172.16.33.139 Mon Oct 2 20:42:24 2023
|
|
|
|
|
|
A network namespace can have VRFs assigned, thus we need to get the priorities
right. This lowers both priorities in general as a VRF or NETNS needs to be
available very early as services can run on top of them.
|
|
ddclient: T5574: Support per-service cache management for providers
|
|
T5600: firewall: change constraints for inbound|outbound interface-name
|
|
Add support for per-service cache management for ddclient providers
via `wait-time` and `expiry-time` options. This allows for finer-grained
control over how often a service is updated and how long the hostname
will be cached before being marked expired in ddclient's cache.
More specifically, `wait-time` controls how often ddclient will attempt
to check for a change in the hostname's IP address, and `expiry-time`
controls how often ddclient to a forced update of the hostname's IP
address.
These options intentionally don't have any default values because they
are provider-specific. They get treated similar to the other provider-
specific options in that they are only used if defined.
|
|
T5165: Migrate policy local-route rule x destination to address
|
|
ddclient: T5612: Miscellaneous improvements and fixes for dynamic DNS
|
|
T5497: Add ability to resequence rule numbers for firewall
|
|
T5616: firewall and policy: add option to be able to match firewall marks
|
|
Migrate policy local-route <destination|source> to node address
replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>'
=> 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>'
|
|
conntrack: T5376: Fix conntrack-sync vyos.configdep issues
|
|
Updated spacing.
|
|
filter and in policy route.
|
|
Fixes `KeyError: 'conntrack_sync'`
Ignore `ConfigError("ConfigError('Interface eth1 requires an IP address!')")` due to calling conntrack-sync too early
|
|
|
|
T5577: Optimized PAM configs for RADIUS/TACACS+
|
|
firewall: T5217: Synproxy bugfix and ct state conflict checking
|
|
|
|
mdns: T5615: Allow controlling IP version to use for mDNS repeater
|
|
Rename avahi-daemon config file to avahi-daemon.conf.j2 to match the
convention used by other config files.
|
|
This commit adds a new configuration option to the mDNS repeater service
to allow controlling which IP version to use for mDNS repeater.
Additionally, publishing AAAA record over IPv4 and A record over IPv6 is
disabled as suggested.
See:
- https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104
- https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
|
|
T5217: Add firewall synproxy
|
|
conntrack: T5376: T5598: Restore kernel conntrack helpers
|
|
firewall: T5614: Add support for matching on conntrack helper
|
|
ipsec: T5606: Add support for whole CA chains
|
|
T5165: Add option protocol for policy local-route
|
|
Add option `protocol` for policy local-route
set policy local-route rule 100 destination '192.0.2.12'
set policy local-route rule 100 protocol 'tcp'
set policy local-route rule 100 set table '100'
|
|
firewall: T5160: Remove zone policy op-mode
|
|
|
|
|
|
`nf_conntrack_helper` that auto-assigned helpers is removed from the kernel
|
|
|
|
Also includes an update to smoketest to verify
|
|
Additional cleanup and refactoring for ddclient scripts including the
smotektests.
|
|
Some porvides (like 'namecheap') allow to use '@' or '*' as hostname
prefix for apex and wildcard records. This commit relaxes the hostname
validation to allow these prefixes.
|
|
Adjust the validator and completion for ddclient to remove unsupported
or superfluous protocols.
Specifically,
- remove 'nsupdate' protocol from the list because there is a separate
config path for that protocol (rfc2136)
- remove 'cloudns' protocol from the list because it has non standard
configuration and is not supported by our configurator at this time
|
|
Enable TTL support for web-service based protocols in addition to
RFC2136 based (nsupdate) protocol.
Since TTL is not supported by all protocols, and thus cannot have a
configuration default, the existing XML snippet `include/dns/time-to-live.xml.i`
does not have common `<defaultValue>300</defaultValue>` anymore and is
instead added explicitly whenever necessary.
|
|
Refactor zone configuration to use shared XML snippet for all cases.
|
|
Adjust the jinja template to avoid generating incorrect ddclient.conf in
some cases. The template is reformatted to guarantee whitespacing and
empty line separation.
|