Age | Commit message (Collapse) | Author |
|
node_changed() will return a list of changed keys under "path". We are not
always interested what changed, sometimes we are only interested if something
changed at all, that what vyos.configdict.is_node_changed() is for.
|
|
T160: NAT64 add match firewall mark feature
|
|
Match mark allows to use firewall marks of packet to use
a specific pool
Example of instance config /run/jool/instance-100.json
```
...
"pool4": [
{
"protocol": "TCP",
"prefix": "192.0.2.10",
"port range": "1-65535",
"mark": 23
},
...
```
|
|
|
|
xml: T5854: clear empty paths left by embedded override of defaultValue
|
|
|
|
T5840: Add override for systemd kea-ctrl-agent.service
|
|
After update KEA to 2.4.x in the bf04cd8fea44d375fb7d93d75a1f31c220730c88
there is a file that expects ConditionFileNotEmpty=/etc/kea/kea-api-password
It cause the unit `kea-ctrl-agent.service` cannot start
systemd[1]: kea-ctrl-agent.service - Kea Control Agent was skipped because of an unmet condition check (ConditionFileNotEmpty=/etc/kea/kea-api-password)
Override systemd kea-ctrl-agent.service do not check this file
|
|
Also, have the smoketest start with a clean CLI instance.
|
|
|
|
Reinstate support for hostname in DHCP reservation. Having `hostname` in
allows for server-side assignment of hostname. This is useful for static
lookup of hostname.
Ensure that hostname is a valid FQDN (doesn't have underscore, etc.)
Additionally, support using either of DUID or MAC address for
reservation. While MAC address is typically used for IPv4, and DUID is
typically used for IPv6, either of them can be used in IPv4 and IPv6
reservations in Kea.
|
|
Updated image_installer.py to try and validate image with all
minisign public keys in /usr/share/vyos/keys/
|
|
srv6: T591: enable SR enabled packet processing on defined interfaces
|
|
T2898: add ndp-proxy service
|
|
dhcp: T5846: Ensure DUID regex range is bound
|
|
The DUID regex was missing a lower bound, which could cause it not to
match when it should.
We have to specify the lower bound explicitly as 0 to keep the regex
behavior similar to that in Python (in Python, omitting the lower bound
is equivalent to specifying 0).
|
|
frr: T4020: re-enable watchfrr in config as it is always running
|
|
dhcp: T5846: Fix include path
|
|
|
|
|
|
dhcp: T5846: Refactor and simplify DUID definition
|
|
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove
explicit call to a separate validator `ipv6-duid` and inline the regex into the
XML definition.
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
|
|
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be
processed or not. This is done using
/proc/sys/net/conf/<iface>/seg6_* variables:
seg6_enabled - BOOL
Accept or drop SR-enabled IPv6 packets on this interface.
Relevant packets are those with SRH present and DA = local.
0 - disabled (default)
not 0 - enabled
Or the VyOS CLI command:
* set protocols segment-routing interface eth0 srv6
|
|
Enable/Disable VRF strict mode, when net.vrf.strict_mode=0 (default) it is
possible to associate multiple VRF devices to the same table. Conversely, when
net.vrf.strict_mode=1 a table can be associated to a single VRF device.
A VRF table can be used by the VyOS CLI only once (ensured by verify()), this
simply adds an additional Kernel safety net, but a requirement for IPv6 segment
routing headers.
|
|
Allow the HTTPS API server to start without any configured keys when GraphQL JWT auth is configured
|
|
and use only PAM auth and JWT
|
|
when no API keys are set
|
|
Rewritten L2TP to get_config_dict
Rewritten L2TP xml to accel-ppp patterns
Migrated 'idle' to 'ppp-options.lcp-echo-timeout'
Migrated 'authentication.mppe' to 'ppp-options.mppe'
Migrated 'authentication.radius.dae-server' to
'authentication.radius.dynamic-author'
Migrated 'authentication.require' to 'authentication.protocol'
Added 'authentication.radius.acct-interim-jitter'
Added 'authentication.radius.preallocate-vif'
Added 'authentication.radius.server.<IP>.acct-port'
Added 'ppp-options.ipv4'
Added smoke-tests
Fixed 'preallocate-vif' in SSTP
|
|
T5828: fix grub installation on arm64-efi machines
|
|
|
|
|
|
This reverts commit 7036c761e74bcd48e3ba714dec4545208ee0e313.
|
|
configdep: T5836: add boolean check whether script called as dependency
|
|
|
|
image-tools: T5831: show system image reverse ordered by date
|
|
|
|
Since the migration of GRUB handling to vyos-1x, the grub install
sequence has hardcoded references to x86.
Change the GRUB sequence so it can work on arm64 as well.
|
|
|
|
T5249: Add rollback-soft feature
|
|
dhcp: T3316: Adjust dhcp-run script to align with kea hooks
|
|
dhcp: T3316: Kea DHCP and DHCPv6 fixes
|
|
The hook arguments passed to `on-dhcp-event.sh` have changed in Kea.
Adjust the script to align with the new arguments.
Additionally, remove FQDN mangling from the script. No need to extract
the domain name from `LEASE4_HOSTNAME` only to append it again.
See: https://kea.readthedocs.io/en/latest/arm/hooks.html#hooks-run-script
|
|
* Move Kea socket permission change on-demand and speed up conf scripts
* Fix issue with DHCP reservations when no `ip-address` value
|
|
ddclient: T5144,T5791: Fix migration to avoid config name conflict
|
|
ocserv: T5796: add CLI knob "http-security-headers"
|
|
|
|
OCserv manual recommended HTTP headers tobe included in the configuration.
(cherry picked from commit ad65d37ddf92ec8416c84707d7d41e63346b550c)
|
|
Since `service dns dynamic address <address> service <service> ...`
changed to `service dns dynamic name <service> address <address> ...`,
the resulting service and address config flip can result in conflicting
`service` name.
Additionally, since dynamic DNS service name now have name constraint,
we need to normalize the service name to conform with the constraint.
We now migrate the service name to (service|rfc2136)-<service>-<address>
to avoid the conflict and optionally append an index if there is still a
name conflict after normalization.
|
|
frr: T4020: add option to define number of open file descriptors
|