| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Every interface on the system can be a member of a bridge - thus the bridge
interface must be the one interface which has the highest priority
compared to all other interfaces - incl. l2tpv3.
With this change the system boots up fine with also l2tpv3 interfaces
participating as bridge members. This change was needed as a l2tpv3 interface
requires proper configured routing oin the system, else adding the
interface will fail miserably:
FileNotFoundError: [Errno 2] ip l2tp add tunnel tunnel_id 200
peer_tunnel_id 100 udp_sport 4000 udp_dport 3000 encap udp
local 172.18.201.10 remote 172.18.203.10
returned: RTNETLINK answers: Network is unreachable
|
|
As L2TPv3 interfaces can be member interface of a bridge device it must be
configured prior to the bridge - else the system will boot with an error as
member adding fails.
|
|
Fixes reference to unspecified variable
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/interfaces-l2tpv3.py", line 245, in <module>
apply(c)
File "/usr/libexec/vyos/conf_mode/interfaces-l2tpv3.py", line 211, inapply
l = L2TPv3If(l2tpv3['intf'], **conf)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py", line 185, in __init__
self._create()
File "/usr/lib/python3/dist-packages/vyos/ifconfig/l2tpv3.py", line 48, in _create
cmd = 'ip l2tp add tunnel tunnel_id {} '.format(config['tunnel_id'])
NameError: name 'config' is not defined
|
|
Commit 8a4dd6c2816 ("ifconfig: T2057: add class Register") added the interface
options but not all have been migrated. The forgotten ones have been
added by this commit (session_id & peer_session_id).
|
|
Import statement has been forgotton on the ifconfig file split.
|
|
keepalived: T1350: Replaced transition scripts logic
|
|
validate: T2182: IPv6 normalisation and % in interface name
|
|
The IPv6 address can be expressed in different ways:
(for example all these are valid loopback ::1, 0::1, 0:0::0:001)
The IPv6 need to be normalised when tested, and the best way to
do this is to test it on-wire representation, the same can be done
for IPv4.
Also The interface name which returned by netifaces.ifaddresses can
have a % in the 'addr' field, for example '::1%eth0', which would
also break the test in is_intf_addr_assigned.
|
|
In old implementation, all notify scripts are configured directly inside a keepalived.conf. This way is not recommended even by keepalived as scripts execution is not tracked and they may be running not in order and killed before the actual work will be finished. We have observed such situations in very rare cases during tests.
New implementation use FIFO pipe, to which keepalived send any state changes. And these notifications are read by a daemon, saved in a queue and processed one by one, which eliminates the situation when the scripts creating inconsistent config or environment.
|
|
This reverts commit e2f80e57d9895d207edf0ad92c299dc7862087d6.
Due to failing smoketests this commit is reverted.
|
|
validate: T2182: IPv6 are not normalised when compared
|
|
T2188: use ntpq for query NTP daemon infos
|
|
ifconfig: T2057: Move code from interface.py to wireguard.py
|
|
Some left over wireguard code was left in the interface.py
file. The code was moved into the wireguard.py file and
the now empty interface.py file removed as no longer holdin
any code.
|
|
In order to be able to use the interface class
with operational mode, these commands must not log as
it would otherwise mess with the output on the screen.
|
|
|
|
vyos.config: T2180: ignore CLI edit level in show_config
|
|
Change trailing syntax
|
|
|
|
Adding an already existing IP address on an interface would cause
the 'ip addr add' command to fail. To prevent this, the code checks
if the IP already exists on the interface.
The code was not normalising the different ways of
representing the IPv6 address (trailing 0, ::, etc.).
|
|
|
|
|
|
|
|
|
|
Update syntax of component version string, before passing config file to
configtree in migration scripts.
|
|
The VirtualMigrator updates the syntax of the component version string.
Remove the default target, allowing downgrade to old syntax.
|
|
By default, the HTTP API will be proxied by any nginx virtual server.
Allow specifying a subset of servers to act as proxy.
|
|
ifconfig: T2166: Recovery Proxy ARP for vlans
|
|
|
|
A user reported a PHY that provides two consecutive MAC addresses, this case has
been added as I was not aware of such cards. As we manipulate the MAC address
anyways its safe to take only the first one.
|
|
Commit 627d1c704c83 ("ifconfig: T2057: explicity name state functions")
introduced a new API naming, unfortunately this was nod added for wireless
interfaces.
|
|
|
|
The list of VRFs to remove has been converted to a dict. The deletion of a VRF
was no longer triggered as the logic still thought it is a list.
|
|
... to not cause any issues with buildin tables or PBR. PBR uses table 1 - 200
so there is a small overlap (by intention)
|
|
OpenVPN, WIFI, SSTP all had the same boiler plate copied about checking if a
process associated with a pidfile is running or not. This has been migrated to
the common library function vyos.util.process_running().
|
|
|
|
|
|
|
|
|
|
|
|
The import prevent code to work and is not used
|
|
The creation of this directory has been done in the past using vyatta-
wirelessmodem and after it's replacement in vyos-1x the directory has not been
deployed anymore. Thos when rendering the PPPoE configuration the directory will
be created on deemand.
|
|
vyatta-cfg-quagga
|
|
ifconfig: T2057: Do not set empty hw_id mac
|
|
* t1988-xml-wirelessmodem:
wwan: T1988: add ipv6 addressing nodes
pppoe: T1318: add command to show statistics
wwan: T1988: ppp: change order of debug and logfile options
wwan: T1988: migrate operational mode commands
wwan: T1988: support interface disable
wwan: T1988: add support for Sierra Wireless MC7710 modem
wwan: T1988: initial XML/Python representation
|
|
|
|
|
|
|
