| Age | Commit message (Collapse) | Author |
|---|
|
Fixed setting a static IP address by Radius in IPoE
Allowing using named pools by default
Allowed adding 'gateway-address' without named pool.
|
|
Add accounting-interim-interval option for PPPoE-server
set service pppoe-server authentication radius accounting-interim-interval '60'
|
|
Ability to get and parse RADIUS attributes via a shell script and
then execute commands
Ane of the usecases is to create a custom shaper with some smart
Extended scripts receive from PPPoE daemon the following variables:
$1 - Interface name
$4 - Tunnel GW IP address
$5 - Delegated IP address to the client
$6 - Calling Station ID (MAC)
if [ -f /run/accel-pppd/radattr.$1 ]; then
true
fi
|
|
Add rate-limit attribute, multiplier, vendor specific attribute
for the [shaper] section
|
|
Fix incorrect regex '\d+' when used vlan ranges
For example 'ipoe-server interface eth1 vlan 2000-3000'
- replace 'interface=re:eth1\.\d+'
=> 'interface=re:^eth1\.(200\d|20[1-9]\d|2[1-9]\d{2}|3000)$'
|
|
T4971: PPPoE server add named ip pool and attr Framed-Pool
|
|
T1993: PPPoE-server add section shaper and fwmark option
|
|
Add a new feature to allow to use named pools
Also it can be used with RADIUS attribute 'Framed-Pool'
set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
Extended PPPoE-server rate-limiter to avoid shaping marked resources
Often this feature needs for ISP, which provides access to some IX
or its resources.
set service pppoe-server shaper fwmark '223'
|
|
Minimum acceptable MTU. If client will try to negotiate less then
specified MTU then it will be NAKed or disconnected if rejects
greater MTU.
Change 'min-mtu' from 1492 to 1280 for 1.3.3
|
|
Add rate-limit options: attribute, muptiplier and vendor
set service ipoe-server auth radius rate-limit attribute 'Mikrotik-Rate-Limit'
set service ipoe-server auth radius rate-limit enable
set service ipoe-server auth radius rate-limit multiplier '0.001'
set service ipoe-server auth radius rate-limit vendor 'Miktorik'
|
|
Multiplier option is required by some vendors for correct shaping
For RADIUS based rate-limits
edit service pppoe-server
set authentication radius rate-limit multiplier '0.001'
|
|
Add new feature to allow to use named pools
Can be used also with Radius attribute 'Framed-Pool'
set service ipoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service ipoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
|
|
|
|
(cherry picked from commit 3d00140453b3967370c77ddd9dac4af223a7ddce)
|
|
|
|
To allow IPv6 only for vpn sstp sessions we have to add
'ppp-options' which can disable IPv4 allocation explicity.
Additional IPv6 ppp-options and fix template for it.
|
|
|
|
|
|
(cherry picked from commit 4b646c1fb31a1a9f9c9d1658734d478fed5f19f1)
|
|
(cherry picked from commit 065c6b620cb52a3235c7b6e210d34dc8cb943b95)
|
|
(cherry picked from commit 52ee92b8edf851939c5ea3dc90fac3f5f90096c2)
|
|
|
|
|
|
|
|
Commit a2ac9fac ("vyos.template: T2720: always enable Jinja2 trim_blocks
feature") globally enabled the trim_blocks feature. Some templates still used
in-line trim_blocks "{%"- or "-%}" which caused miss-placed line endings.
This is fixed by removing all in-line trim_block statememnts of Jinja2 templates.
|
|
|
|
|
|
|
|
Required to get a common CLI for all services provided by Accel-PPP. Once the
CLI for each service is consitent - Jinja2 templates can be reused together
with get_config_dict().
|
|
|
|
|
|
For easier configuration read in (CLI) validation and also template rendering
it makes sense to drop the old, single implementation and move to the new,
generic get_config_dict() approach.
Recurring configuration parts like ip-pool, ipv6-pool and nameservers have
also been split our into individual templates which will be included through
Jinja2 - leading to a single-source of the template sections, too.
|
|
|
|
|
|
|
|
Make the port used for RADIUS accounting user configurable. This is now
valid for the following services which are based on Accel-PPP:
* ipoe-server
* pppoe-server
* l2tp
* pptp
* sstp
|
|
|
|
|
|
|
|
|
|
... by setting AdvAutonomousFlag=1 when an IPv6 client pool is defined.
|
|
New command added:
* set vpn sstp network-settings name-server 2001:db8::1111
|
|
New commands added:
* set vpn sstp network-settings client-ipv6-pool prefix 2001:db8::/64 mask 112
* set vpn sstp network-settings client-ipv6-pool delegate 2001:db8:100::/48 delegation-prefix 64
|
|
|
|
|
|
|
|
|
|
|
