summaryrefslogtreecommitdiff
path: root/data/templates/frr
AgeCommit message (Collapse)Author
2024-01-23bfd: T5967: add minimum-ttl optionChristian Breunig
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254> * set protocols bfd profile <name> minimum-ttl <1-254> (cherry picked from commit 1f07dcbddfcfdbb9079936ec479c5633934dd547)
2024-01-14bgp: T591: add VPN nexthop support per address-familyChristian Breunig
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address> set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address> (cherry picked from commit 7349927908206fa83a7295d643f56950309efb4f)
2024-01-14bgp: T591: add SRv6 per address-family SID supportChristian Breunig
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575> set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575> (cherry picked from commit d7e248ba514108461ca9d5875c0be077c80ceca7)
2024-01-10T5530: isis: Adding loop free alternate featureCheeze_It
(cherry picked from commit 7a2b70bd73c8579a885348b93b8addfb20fb006c)
2023-12-21frr: T4020: re-enable watchfrr in config as it is always runningChristian Breunig
(cherry picked from commit 42614633901713e6472b43f95065d215344843b1)
2023-12-18T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy (cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n> (cherry picked from commit 892c28ccf634173d4c4952c248cb03974c560793)
2023-12-13srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit (cherry picked from commit ca301cdd4746187f96ff84e411fda6a84e33f237)
2023-12-13bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit (cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
2023-12-09git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication. (cherry picked from commit c30002208d392177cb1ffc1a5c714f7ad6d573b6)
2023-11-20frr: T5733: enable pim6 daemonChristian Breunig
2023-11-15pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
(cherry picked from commit 403d2ffd6e46cb082b1d16ddf515e1784bee968c) # Conflicts: # data/templates/frr/pim6d.frr.j2 # interface-definitions/protocols-pim6.xml.in # smoketest/scripts/cli/test_protocols_pim6.py # src/conf_mode/protocols_pim6.py
2023-11-15igmp: T5736: support per interface "disable" CLI nodeChristian Breunig
(cherry picked from commit 6ce2ecb10884a4b79a7643e22596a2d03d805a91)
2023-11-15pim: T5733: fix CLI level of global PIM commandsChristian Breunig
(cherry picked from commit dd13213ae94f071bc30cc17f5fabef02fbf95939)
2023-11-15igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp" (cherry picked from commit bc83fb097719f5c4c803808572f690fbc367b9e5)
2023-11-15pim: T5733: rename watermark-warn -> watermark-warningChristian Breunig
(cherry picked from commit 45ea9ed72ee11809f69619a40ae243df562de39f)
2023-11-15pim: T5733: add missing FRR PIM related featuresChristian Breunig
Migrate CLI configuration retrival to common get_config_dict(). In addition add new functionality to VyOS that is PIM related and already available in FRR. (cherry picked from commit 9abc02edcc237760f1f8aa1b3f08d7f4d18f866c) # Conflicts: # python/vyos/frr.py # src/op_mode/restart_frr.py
2023-11-07ldpd: T5648: Fix ldpd template errorsDevon Mar
Bug introduced in https://github.com/vyos/vyos-1x/commit/8fb6e715d32e7eff77e413d8577059dd55b24c0a (cherry picked from commit df6ced3811ebe6446039277ff3fc301a83776dc1)
2023-11-06bgp: T5698: add support for EVPN MultihomingChristian Breunig
(cherry picked from commit 1d67620e656766731ad6825fd8961140eb50d8a7)
2023-11-06bond: T5698: add support for EVPN MultihomingChristian Breunig
set interfaces bonding bond10 evpn es-df-pref '50' set interfaces bonding bond10 evpn es-id '10' set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab' set interfaces bonding bond10 member interface 'eth3' set interfaces bonding bond10 mode '802.3ad' (cherry picked from commit 937685608e61151275c4f60c6d00c0154f2ca06d)
2023-09-26rpki: T2044: add to daemons Jinja2 templateChristian Breunig
This is a combined backport of commits: * a4aad1120 - frr: T5591: hint about daemons that always run and can't be disabled * d9d2b2b96 - frr: T5591: cleanup of daemons file * 40503a9d7 - T2044: RPKI doesn't boot properly
2023-09-22Merge pull request #2291 from vyos/mergify/bp/sagitta/pr-2284Christian Breunig
bgp: T5596: add new features from FRR 9 (backport #2284)
2023-09-19bgp: T5596: add new features from FRR 9Christian Breunig
* Add BGP Software Version capability (draft-abraitis-bgp-version-capability) set protocols bgp neighbor 192.0.2.1 capability software-version * Add BGP neighbor path-attribute treat-as-withdraw command set protocols bgp neighbor 192.0.2.1 path-attribute treat-as-withdraw (cherry picked from commit d285355716708a46767c18661976906812da8a3c)
2023-09-19isis: T5597: add new features from FRR 9Christian Breunig
* Add support for IS-IS advertise-high-metrics set protocols isis advertise-high-metrics * Add support for IS-IS advertise-passive-only set protocols isis advertise-passive-only (cherry picked from commit f7d35c15256ea74ab32c9b978a5c6fdbd659a7a0)
2023-09-16frr: T2472: disable eigrp daemonChristian Breunig
There is no EIGRP support in VyOS 1.4/sagitta
2023-09-13T5576: Add BGP remove-private-as all optionViacheslav Hletenko
Add the ability to use the option all for remove-private-as. Remove private ASNs in outbound updates. all - Apply to all AS numbers set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all (cherry picked from commit d72024b11e127cc11931cfaee4d07944dceb1ea9)
2023-09-03T5543: IGMP: fix source address handling in static joinsYuxiang Zhu
The following command expects to join source-specific multicast group 239.1.2.3 on interface eth0, where the source address is 192.0.2.1. set protocols igmp interface eth0 join 239.1.2.3 source 192.0.2.1 This command should generate FRR config: interface eth0 ip igmp ip igmp join 239.1.2.3 192.0.2.1 exit However, there is a bug in the Jinja template where `if ifaces[iface].gr_join[group]` is mostly evaluated as `false` because `iface` is a loop variable from another loop.
2023-08-19bgp: T5466: rename type on CLI per-nexhop -> per-nexthop for l3vpn MPLS labelsChristian Breunig
This fixes a CLI typo added in commit 77ef9f800 ("T5466: L3VPN label allocation mode").
2023-08-16 T5466: L3VPN label allocation modefett0
2023-08-07T5446: BGP: change <bgp paramater bestpath med> from node to leafNode, in ↵Nicolas Fort
order to avoid empty value and problems when removing such parameters
2023-08-04frr: T5415: make mgmtd only listen on localhostChristian Breunig
2023-07-21ospf: T5377: add "capability opaque" supportChristian Breunig
2023-07-20ospf: T5377: add graceful restart FRR feature (RFC 3623)Christian Breunig
New CLI commands: * set protocols ospf graceful-restart grace-period 300 * set protocols ospf graceful-restart helper planned-only * set protocols ospf graceful-restart helper no-strict-lsa-checking * set protocols ospf graceful-restart helper supported-grace-time 400 * set protocols ospf graceful-restart helper enable router-id 192.0.2.1 * set protocols ospf graceful-restart helper enable router-id 192.0.2.2 * set protocols ospfv3 graceful-restart grace-period 300 * set protocols ospfv3 graceful-restart helper planned-only * set protocols ospfv3 graceful-restart helper lsa-check-disable * set protocols ospfv3 graceful-restart helper supported-grace-time 400 * set protocols ospfv3 graceful-restart helper enable router-id 192.0.2.1 * set protocols ospfv3 graceful-restart helper enable router-id 192.0.2.2
2023-07-12bgp: T5338: simplify XML and code handlingChristian Breunig
2023-07-11bgp: T5338: Added 'protocols bgp interface <int> mpls forwarding' featureaapostoliuk
Added 'protocols bgp interface <int> mpls forwarding' feature. It is possible to permit BGP install VPN prefixes without transport labels. This configuration will install VPN prefixes originated from an e-bgp session, and with the next-hop directly connected.
2023-07-03ospf: T5334: add support for external route summarisation Type-5 and Type-7 LSAsChristian Breunig
* set protocols ospf aggregation timer <seconds> * set protocols ospf summary-address x.x.x.x/x [tag 1-4294967295] * set protocols ospf summary-address x.x.x.x/x no-advertise
2023-05-19T5230: remove trailing tabs causing j2lint errorJohn Estabrook
2023-05-19T5230: Added missing enforce-first-as option to bgp protocol common config ↵Wered
and frr bgp jinja template.
2023-05-02T5163: Add match protocol filter for route-mapViacheslav Hletenko
Ability to match 'source-protocol' for the route-map filters set policy route-map foo rule 10 action 'permit' set policy route-map foo rule 10 match protocol 'bgp'
2023-04-29static: T5161: add BFD monitoring for static routesfett0
2023-04-27bgp: T5010: fix for-loop copy/paste errorChristian Breunig
Commit 923d7f1d7 (bgp: T5010: add missing for-loop when iterating over "both" route-target) referenced export rt instead of both. This happened while improperly copy-pasting the line.
2023-04-27bgp: T5010: add missing for-loop when iterating over "both" route-targetChristian Breunig
2023-04-26vrf: T5174: ensure no duplicate VNIs can be definedChristian Breunig
2023-04-22frr: T4353: fix "exit-vrf" indentionChristian Breunig
2023-04-21vrf: T5150: l3vni must be removed prior to removing BGP VRF processChristian Breunig
2023-04-13T5150: initial VRF support for Kernel/Zebra route-map filteringChristian Breunig
2023-04-13T5150: do not apply zebra route-map from routing-daemon config levelChristian Breunig
2023-04-13T5150: initial implementation of new Kernel/Zebra route-map supportChristian Breunig
It is possible to install a route-map which filters the routes between routing daemons and the OS kernel (zebra) As of now this can be done by e.g. * set protocols ospf route-map foo * set protocols ospfv3 route-map foo * set protocols bgp route-map foo Which in turn will install the following lines into FRR * ip protocol ospf route-map foo * ipv6 protocol ospf6 route-map foo * ip protocol bgp route-map foo The current state of the VyOS CLI is incomplete as there is no way to: * Install a filter for BGP IPv6 routes * Install a filter for static routes * Install a filter for connected routes Thus the CLI should be redesigned to close match what FRR does for both the default and any other VRF * set system ip protocol ospf route-map foo * set system ipv6 protocol ospfv3 route-map foo * set system ip protocol bgp route-map foo * set system ipv6 protocol bgp route-map foo The configuration can be migrated accordingly. This commit does not come with the migrator, it will be comitted later.
2023-04-04T5081: ISIS and OSPF syncronization with IGP-LDP syncCheeze_It
2023-03-27bgp: T5114: support configuring TCP keepalive messagesChristian Breunig
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 21:01:33 +0000