summaryrefslogtreecommitdiff
path: root/data/templates/frr
AgeCommit message (Collapse)Author
2021-04-09bgp: T3463: Jinja2 template re-ordering fir ebgp-requires-policyChristian Poessinger
This is a fix for commit 6f6f45c5 ("bgp: T3463: change no-ipv4-unicast order when applying configuration") as this changed the handling of the "else" path, which lead to failing smoketests as the "no bgp ebgp-requires-policy" option was no longer set.
2021-04-08bgp: T3463: change no-ipv4-unicast order when applying configurationChristian Poessinger
The "no bgp default ipv4-unicast" option must be applied to FRR before adding any neighbor to the system. If this is not the case, neighbors will start exchanging v4 routes over v6 peers.
2021-04-07vrf: T3344: re-add virtual network identifierChristian Poessinger
Commit 548d9057e3e (vrf: T3344: move dynamic routing protocols under "vrf name <name> protocols") temporary removed the possibility to specify the VNI for a given VRF to to changing of the CLI configuration nodes. As VNI is set inside zebra, we can re-use the now widely deployed frr python library to configure and change the configuration without any interference to other FRR daemons.
2021-03-29bgp: T1711: remove ASN tagNode and move to "local-as"Christian Poessinger
Every time when set configuration bgp, you need set AS number. There is very less benefit in this system so the AS number is moved from a tagNode level down to a leafNode with the name "local-as", same as on the neighbor or peer-group level. This changes the CLI configuration from: set protocols bgp 100 neighbor 10.10.1.2 remote-as 200 to set protocols bgp local-as 100 set protocols bgp neighbor 10.10.1.2 remote-as 200
2021-03-21isis: T3417: drop artificial "domain" node identifying the IS-IS process nameChristian Poessinger
As we and FRR do not support multiple FRR process instances, there is no need to make this configurable for a user. We rather rely on a solid default "VyOS".
2021-03-21isis: T3417: add VRF supportChristian Poessinger
VRF support can be tested using: set vrf name red table 1000 set vrf name red protocols isis domain FOOO set vrf name red protocols isis net 49.0001.1921.6800.1002.00 set vrf name red protocols isis interface eth1
2021-03-21isis: T3417: move from cli tagNode to nodeChristian Poessinger
As there can only be one running IS-IS process (FRR limitation) there is no need in having a tagNode here. This adds artifical restrictions/limitations when moving on to support VRFs for IS-IS protocol.
2021-03-14vrf: T3344: move dynamic routing protocols under "vrf name <name> protocols"Christian Poessinger
Instead of having the dynamic routing protocols OSPF and BGP residing under the "protocols vrf <name> [ospf|bgp]" nodes, rather move them directly under the "vrf name <name> protocols [ospf|bgp]" node. Now all VRF related parts are placed under the same root node. This eases the verify steps tremendously, as we do not need to check wheter a VRF eists or not, it will always exist as we operate under a child node.
2021-03-14vrf: bgp: T2271: create individual BGP process for specified VRF nameChristian Poessinger
The following VyOS CLI config vrf red { bgp 100 { neighbor 1.1.1.1 { peer-group foo } peer-group foo { passive password bar remote-as 200 } } } Will generaste the FRR configuration: ! router bgp 100 vrf red no bgp ebgp-requires-policy no bgp network import-check neighbor foo peer-group neighbor foo remote-as 200 neighbor foo password bar neighbor foo passive neighbor 1.1.1.1 peer-group foo !
2021-03-14vrf: ospf: T2271: create individual OSPF process for specified VRF nameChristian Poessinger
VyOS CLI config: vrf red { ospf { default-information { originate { always } } default-metric 30 passive-interface default } } Will create the FRR configuration snippet: ! router ospf vrf red auto-cost reference-bandwidth 100 timers throttle spf 200 1000 10000 passive-interface default default-metric 30 default-information originate always !
2021-03-10bgp: evpn: T1513: add support for per VNI route-distinguished and route-targetChristian Poessinger
set protocols bgp 65010 address-family l2vpn-evpn vni 100 route-target both 516:10516 set protocols bgp 65010 address-family l2vpn-evpn vni 100 rd 192.168.0.1:514 Todo: add verify() step to check if at least one evpn enabled BGP neighbor exits, else FRR will error out with: This command is only supported under EVPN VRF
2021-03-10rpki: T3399: Fix template dashes replacesever-sever
(cherry picked from commit 55c4dd3586a3b0e2fe53ccad75c996b55d9979eb)
2021-03-08bgp: T3391: migrate old IPv4 only maximum-paths config to new syntaxChristian Poessinger
2021-03-07bgp: T3391: add per AFI maximum-paths supportChristian Poessinger
* set protocols bgp ASN address-family ipv4-unicast maximum-paths * set protocols bgp ASN address-family ipv4-unicast maximum-paths-ibgp * set protocols bgp ASN address-family ipv6-unicast maximum-paths * set protocols bgp ASN address-family ipv6-unicast maximum-paths-ibgp
2021-02-27bgp: T3365: After commit bf9c914 config interface become out of the checksever-sever
2021-02-27bgp: T3365: Fix remote-as ordering for neighborsever-sever
2021-02-26Merge pull request #744 from Cheeze-It/currentChristian Poessinger
bgp: T2100: Changing RFC8212 behavior and option toggle
2021-02-26BGP: T2100: Adding RFC8212 option toggle.Cheeze_It
In this commit we add the default operation within BGP to have RFC8212 disabled for eBGP routes. This default should preserve the normal behavior for VyOS from earlier releases of FRR to the current latest release. Another option that we add is the ability to toggle whether or not RFC8212 is enabled or disabled.
2021-02-24route: static: T2450: add missing "dhcp-interface" route optionChristian Poessinger
As thought in the beginning the dhcp-interface route option can not be superseeded by the interface option. When a route is installed for a DHCP interface, that interface is usually a broadcast interface which can not be used for plain interface-based routes. The old Vyatta logic was migrated to Python where the current received next-hop address from the DHCP interface is installed as next-hop address.
2021-02-21Merge pull request #737 from sever-sever/T3332Christian Poessinger
bgp: T3322: Fix timers for neighbor
2021-02-21bgp: T3322: Fix timers for neighborsever-sever
2021-02-19bgp: T3330: Fix capability orf prefix-listsever-sever
2021-02-16bfd: T3310: use end to exit FRR scopeChristian Poessinger
We need to exit from the bfd context by end instead of exit, else FRR reload will get confused: frr-reload output: 168 2021-02-16 21:13:19,014 DEBUG: LINE ip prefix-list GLOBAL seq 10 permit 192.168.100.1/32: append to current_context_lines, ['bfd']
2021-02-16ospf: T3047: support virtual-link interfaces on "passive-interface-exclude"Christian Poessinger
This superseeds GitHub pull request #723 by implementing support to add an OSPF virtual-link interface which connects different areas to the "no passive-interface" configuration option when the system uses "passive-interface default". Setting "protocols ospf passive-interface-exclude vlink0" on the VyOS CLI will render the FRR OSPF configuration "no passive-interface VLINK0".
2021-02-16bgp: T2100: always set "no bgp network import-check"Christian Poessinger
In order to keep the current behavior when upgrading from 1.2 -> 1.3 -> 1.4 FRR requires us to set this option. This configuration modifies the behavior of the network statement. If you have this configured the underlying network must exist in the rib (default). If you have the [no] form configured then BGP will not check for the networks existence in the rib. For FRR versions 7.3 and before frr defaults for datacenter were the network must exist, traditional did not check for existence. For versions 7.4 and beyond both traditional and datacenter the network must exist. VyOS uses "traditional".
2021-02-16ospfv3: T3313: move interface related options to "protocols ospfv3 interface"Christian Poessinger
2021-02-15Merge pull request #732 from c-po/t3310-bfdJohn Estabrook
bfd: T3310: migrate to get_config_dict() and FRR reload
2021-02-15bgp: T1513: add per VRF vni supportChristian Poessinger
2021-02-15bfd: T3310: implement peer profile supportChristian Poessinger
2021-02-15bfd: T3310: migrate to get_config_dict() and FRR reloadChristian Poessinger
2021-02-14templates: convert DOS -> UNIX line endingsChristian Poessinger
2021-02-14bgp: T2315: add CLI options for addpath-tx-(all-paths|bestpath-per-AS)Christian Poessinger
* protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-all * protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-per-as * protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-all * protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-per-as
2021-02-14bgp: T1513: add per VNI advertise-default-gw, advertise-svi-ip optionsChristian Poessinger
2021-02-14bgp: T2844: add IPv4 disable-send-community supportChristian Poessinger
2021-02-14bgp: T2387: bugfix missing options not added to FRRChristian Poessinger
The following options were not represented in the Jinja2 template: - port - advertisement-interval - strict-capability-match In addition the smoketests have been extended to support IPv6 neighbors, too.
2021-02-14bgp: T3308: add graceful-shutdown optionChristian Poessinger
2021-02-14bgp: T1513: make vni a multi nodeChristian Poessinger
2021-02-13bgp: T2387: bgp_neighbor macro should access address family dict with items()Christian Poessinger
2021-02-13bgp: T1513: extend supported evpn support/cli optionsChristian Poessinger
Add CLI options for: - advertise-pip - rt-auto-derive - flooding - rd - route-target
2021-02-11ripng: T3281: move common parts into Jinja2 includeChristian Poessinger
2021-02-10rip: T2547: fix indention of distribute-list in FRR templateChristian Poessinger
2021-02-10ripng: T3281: migrate to get_config_dict() and FRR reloadChristian Poessinger
2021-02-09bgp: T1513: initial implementation of L2VPN EVPN supportChristian Poessinger
2021-02-09bgo: T3183: T2100: enable "no bgp ebgp-requires-policy"Christian Poessinger
2021-02-07rip: T2547: migrate interface specific options to "protocols rip"Christian Poessinger
2021-02-06rip: T2547: migrate to get_config_dict() and FRR reloadChristian Poessinger
2021-02-05route: static: T2450: provide full protocol support in XML and Python with ↵Christian Poessinger
new CLI
2021-02-05vrf: T2450: provide full protocol support in XML and Python with new CLIChristian Poessinger
2021-02-02ospf: T3263: support hello sub-second timerChristian Poessinger
Added "set protocols ospf interface eth1 hello-multiplier <n>" CLI command. This is mutually exclusive to "set protocols ospf interface eth1 dead-interval <n>".
2021-01-29ospf: T3267: bugfix missing interface parameters cost, priority and bandwidthChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 08:33:00 +0000