summaryrefslogtreecommitdiff
path: root/data/templates/frr
AgeCommit message (Collapse)Author
2024-02-16T6001: add option to disable next-hop-tracking resolve-via-default in VRF ↵Christian Breunig
context * set vrf name <name> ip nht no-resolve-via-default * set vrf name <name> ipv6 nht no-resolve-via-default
2024-02-16T6001: add option to disable next-hop-tracking resolve-via-defaultChristian Breunig
* set system ip nht no-resolve-via-default * set system ipv6 nht no-resolve-via-default
2024-02-14eigrp: T2472: improve code for later testsChristian Breunig
2024-02-13Merge pull request #2987 from c-po/evpn-macvrf-sooChristian Breunig
bgp: T6032: add EVPN MAC-VRF Site-of-Origin support
2024-02-11Merge pull request #2980 from c-po/srv6-T5849Daniil Baturin
srv6: T5849: add segment support to "protocols static route6"
2024-02-11bgp: T6032: add EVPN MAC-VRF Site-of-Origin supportChristian Breunig
In some EVPN deployments it is useful to associate a logical VTEP's Layer 2 domain (MAC-VRF) with a Site-of-Origin "site" identifier. This provides a BGP topology-independent means of marking and import-filtering EVPN routes originated from a particular L2 domain. One situation where this is valuable is when deploying EVPN using anycast VTEPs set protocols bgp address-family l2vpn-evpn mac-vrf soo
2024-02-11srv6: T5849: add segment support to "protocols static route6"Christian Breunig
* set protocols static route6 <prefix> next-hop <address> segments 'x:x::x:x/y:y::y/z::z' * set protocols static route6 <prefix> interface <interface> segments 'x:x::x:x/y:y::y/z::z'
2024-02-10bgp: T6010: support setting multiple values for neighbor path-attributeChristian Breunig
2024-02-08Merge pull request #2955 from c-po/rpki-T6023Christian Breunig
rpki: T6023: add support for CLI knobs expire-interval and retry-interval
2024-02-07bgp: T6024: add additional missing FRR featuresChristian Breunig
* set protocols bgp parameters labeled-unicast <explicit-null | ipv4-explicit-null | ipv6-explicit-null> * set protocols bgp parameters allow-martian-nexthop * set protocols bgp parameters no-hard-administrative-reset"
2024-02-07rpki: T6023: add support for CLI knobs expire-interval and retry-intervalChristian Breunig
2024-02-03rpki: T6011: known-hosts-file is no longer supported by FRRChristian Breunig
2024-01-23bfd: T5967: add minimum-ttl optionChristian Breunig
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254> * set protocols bfd profile <name> minimum-ttl <1-254>
2024-01-14bgp: T591: add VPN nexthop support per address-familyChristian Breunig
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address> set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address>
2024-01-14bgp: T591: add SRv6 per address-family SID supportChristian Breunig
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575> set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575>
2023-12-21frr: T4020: re-enable watchfrr in config as it is always runningChristian Breunig
2023-12-15Merge pull request #2639 from c-po/frr-t4020Viacheslav Hletenko
frr: T4020: add option to define number of open file descriptors
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n>
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-08git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication.
2023-11-13pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
2023-11-13igmp: T5736: support per interface "disable" CLI nodeChristian Breunig
2023-11-13pim: T5733: fix CLI level of global PIM commandsChristian Breunig
2023-11-13igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp"
2023-11-13pim: T5733: rename watermark-warn -> watermark-warningChristian Breunig
2023-11-13pim: T5733: add missing FRR PIM related featuresChristian Breunig
Migrate CLI configuration retrival to common get_config_dict(). In addition add new functionality to VyOS that is PIM related and already available in FRR.
2023-10-30bgp: T5698: add support for EVPN MultihomingChristian Breunig
2023-10-30bond: T5698: add support for EVPN MultihomingChristian Breunig
set interfaces bonding bond10 evpn es-df-pref '50' set interfaces bonding bond10 evpn es-id '10' set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab' set interfaces bonding bond10 member interface 'eth3' set interfaces bonding bond10 mode '802.3ad'
2023-10-11ldpd: T5648: Fix ldpd template errorsDevon Mar
Bug introduced in https://github.com/vyos/vyos-1x/commit/8fb6e715d32e7eff77e413d8577059dd55b24c0a
2023-10-08Merge pull request #2263 from Cheeze-It/currentViacheslav Hletenko
T5530: isis: Adding loop free alternate feature
2023-10-06T5530: isis: Adding loop free alternate featureCheeze_It
2023-09-21frr: T5591: hint about daemons that always run and can't be disabledChristian Breunig
2023-09-21frr: T5591: cleanup of daemons fileApachez
2023-09-19Merge pull request #2284 from c-po/t5596-bgpChristian Breunig
bgp: T5596: add new features from FRR 9
2023-09-18isis: T5597: add new features from FRR 9Christian Breunig
* Add support for IS-IS advertise-high-metrics set protocols isis advertise-high-metrics * Add support for IS-IS advertise-passive-only set protocols isis advertise-passive-only
2023-09-18bgp: T5596: add new features from FRR 9Christian Breunig
* Add BGP Software Version capability (draft-abraitis-bgp-version-capability) set protocols bgp neighbor 192.0.2.1 capability software-version * Add BGP neighbor path-attribute treat-as-withdraw command set protocols bgp neighbor 192.0.2.1 path-attribute treat-as-withdraw
2023-09-14T2044: RPKI doesn't boot properlyApachez
2023-09-13T5576: Add BGP remove-private-as all optionViacheslav Hletenko
Add the ability to use the option all for remove-private-as. Remove private ASNs in outbound updates. all - Apply to all AS numbers set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all
2023-09-09Merge pull request #2179 from vfreex/add-mldChristian Breunig
T5518: Add basic MLD support
2023-09-08T5518: Add basic MLD supportYuxiang Zhu
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd. I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved. Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks. Example commands: ``` // Enable on interface eth0 set protocols pim6 interface eth0 // Explicitly join multicast group ff18::1234 on interface eth1 set protocols pim6 interface eth1 mld join ff18::1234 // Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1 set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1 ```
2023-09-03T5543: IGMP: fix source address handling in static joinsYuxiang Zhu
The following command expects to join source-specific multicast group 239.1.2.3 on interface eth0, where the source address is 192.0.2.1. set protocols igmp interface eth0 join 239.1.2.3 source 192.0.2.1 This command should generate FRR config: interface eth0 ip igmp ip igmp join 239.1.2.3 192.0.2.1 exit However, there is a bug in the Jinja template where `if ifaces[iface].gr_join[group]` is mostly evaluated as `false` because `iface` is a loop variable from another loop.
2023-08-19bgp: T5466: rename type on CLI per-nexhop -> per-nexthop for l3vpn MPLS labelsChristian Breunig
This fixes a CLI typo added in commit 77ef9f800 ("T5466: L3VPN label allocation mode").
2023-08-16 T5466: L3VPN label allocation modefett0
2023-08-07T5446: BGP: change <bgp paramater bestpath med> from node to leafNode, in ↵Nicolas Fort
order to avoid empty value and problems when removing such parameters
2023-08-04frr: T5415: make mgmtd only listen on localhostChristian Breunig
2023-07-21ospf: T5377: add "capability opaque" supportChristian Breunig
2023-07-20ospf: T5377: add graceful restart FRR feature (RFC 3623)Christian Breunig
New CLI commands: * set protocols ospf graceful-restart grace-period 300 * set protocols ospf graceful-restart helper planned-only * set protocols ospf graceful-restart helper no-strict-lsa-checking * set protocols ospf graceful-restart helper supported-grace-time 400 * set protocols ospf graceful-restart helper enable router-id 192.0.2.1 * set protocols ospf graceful-restart helper enable router-id 192.0.2.2 * set protocols ospfv3 graceful-restart grace-period 300 * set protocols ospfv3 graceful-restart helper planned-only * set protocols ospfv3 graceful-restart helper lsa-check-disable * set protocols ospfv3 graceful-restart helper supported-grace-time 400 * set protocols ospfv3 graceful-restart helper enable router-id 192.0.2.1 * set protocols ospfv3 graceful-restart helper enable router-id 192.0.2.2
2023-07-12bgp: T5338: simplify XML and code handlingChristian Breunig
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 06:23:12 +0000