summaryrefslogtreecommitdiff
path: root/data/templates/ipsec
AgeCommit message (Collapse)Author
2024-02-03ipsec: T5998: add replay-windows settingChristian Breunig
The replay_window for child SA will always be 32 (hence enabled). Add a CLI node to explicitly change this. * set vpn ipsec site-to-site peer <name> replay-window <0-2040>
2024-01-17T5953: Changed values of 'close-action' to Strongswan valuesaapostoliuk
Changed the value from 'hold' to 'trap' in the 'close-action' option in the IKE group. Changed the value from 'restart' to 'start' in the 'close-action' option in the IKE group.
2024-01-16T4658: Renamed DPD action value from 'hold' to 'trap'aapostoliuk
Renamed DPD action value from 'hold' to 'trap'
2023-12-30T5870: ipsec remote access VPN: add x509 ("pubkey") authentication.Lucas Christian
2023-02-15ipsec: T4593: Migrate and remove legacy `include-ipsec` nodessarthurdev
Not supported with swanctl
2023-01-26T4916: Rewrite IPsec peer authentication and psk migrationViacheslav Hletenko
Rewrite strongswan IPsec authentication to reflect structure from swanctl.conf The most important change is that more than one local/remote ID in the same auth entry should be allowed replace: 'ipsec site-to-site peer <tag> authentication pre-shared-secret xxx' => 'ipsec authentication psk <tag> secret xxx' set vpn ipsec authentication psk <tag> id '192.0.2.1' set vpn ipsec authentication psk <tag> id '192.0.2.2' set vpn ipsec authentication psk <tag> secret 'xxx' set vpn ipsec site-to-site peer <tag> authentication local-id '192.0.2.1' set vpn ipsec site-to-site peer <tag> authentication mode 'pre-shared-secret' set vpn ipsec site-to-site peer <tag> authentication remote-id '192.0.2.2' Add template filter for Jinja2 'generate_uuid4'
2023-01-12T4118: Add default value any for connection remote-idViacheslav Hletenko
If IPsec "peer <tag> authentication remote-id" is not set it should be "%any" by default https://docs.strongswan.org/docs/5.9/swanctl/swanctlConf.html#_connections_conn_remote Set XML default value in use it in the python vpn_ipsec.py script
2022-11-21T4823: Fix IPsec transport mode remote TSViacheslav Hletenko
Remote TS for transport mode GRE must be remote-address and not peer name
2022-10-31ipsec: T4787: add support for road-warrior/remote-access RADIUS timeoutChristian Poessinger
This enabled users to also use 2FA/MFA authentication with a radius backend as there is enough time to enter the second factor.
2022-09-28op-mode: ipsec: T4719: bugfix IKEv2 road-warrior profile generatorChristian Poessinger
Commit bd4588827b ("ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer") changed the CLI syntax of ipsec. This resulted in a node not renamed in the op-mode generator when generating IKEv2 IPSec iOS configuration profiles.
2022-09-20ipsec: T4118: bugfix migration of IKEv2 road-warrior "id" CLI optionChristian Poessinger
The "authentication id" option for road-warriors did not get migrated to the new local-id CLI node. This has been fixed.
2022-09-16Merge pull request #1463 from sever-sever/T4118Daniil Baturin
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
2022-09-16ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peerViacheslav Hletenko
Migration and Change boolean nodes "enable/disable" to disable-xxxx, enable-xxxx and just xxx for VPN IPsec configurations - IKE changes: - replace 'ipsec ike-group <tag> mobike disable' => 'ipsec ike-group <tag> disable-mobike' - replace 'ipsec ike-group <tag> ikev2-reauth yes|no' => 'ipsec ike-group <tag> ikev2-reauth' - ESP changes: - replace 'ipsec esp-group <tag> compression enable' => 'ipsec esp-group <tag> compression' - PEER changes: - replace: 'peer <tag> id xxx' => 'peer <tag> local-id xxx' - replace: 'peer <tag> force-encapsulation enable' => 'peer <tag> force-udp-encapsulation' - add option: 'peer <tag> remote-address x.x.x.x' Add 'peer <name> remote-address <name>' via migration script
2022-08-10dmvpn: T4595: Fix dpd profile optionsViacheslav Hletenko
Fix template for configuration DMVPN IKE profile dead-peer-detection delay and dead-peer-detecion timeout options
2022-05-06ipsec: T4353: use "" quotes on road-warrior idChristian Poessinger
2022-05-02ipsec: T4353: bugfix template extensionChristian Poessinger
2022-05-01ipsec: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-04-25vpn-ipsec: T4398: Fix unexpected passthrough policy for peerViacheslav Hletenko
Set default passtrough list to None to prevent unexpected policy for peers with not overplapped local and remote prefixes
2022-04-13ipsec: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-03-24ike-group: T4288 : close-action is missing in swanctl.confsrividya0208
close-action parameter is missing in the swanctl.conf file
2022-02-22Merge pull request #1230 from sever-sever/T1856Christian Poessinger
ipsec: T1856: Ability to set SA life bytes and packets
2022-02-20ipsec: T3948: Add CLI site-to-site peer connection-type noneViacheslav Hletenko
set vpn ipsec site-to-site peer 192.0.2.14 connection-type none
2022-02-20ipsec: T1856: Ability to set SA life bytes and packetsViacheslav Hletenko
set vpn ipsec esp-group grp-ESP life-bytes '100000' set vpn ipsec esp-group grp-ESP life-packets '2000000'
2022-02-19vpn: T4254: Add cisco_flexvpn and install_virtual_ip_on optionsViacheslav Hletenko
Ability to set Cisco FlexVPN vendor ID payload: charon.cisco_flexvpn charon.install_virtual_ip_on swanctl.connections.<conn>.vips = x.x.x.x, z.z.z.z set vpn ipsec options flexvpn set vpn ipsec options virtual-ip set vpn ipsec options interface tunX set vpn ipsec site-to-site peer x.x.x.x virtual-address x.x.x.x
2021-12-31ipsec: T4126: Ability to set priorities for installed policyViacheslav
Add priority for policy based IPSec VPN tunnels If 2 tunnels have the same pair of local and remote traffic selectors (prefixes) it allows to set more preforable install policy from required peer The lowest priority is more preforable
2021-12-28ipsec: T4111: Fix for swanctl configuration IPV6 peersViacheslav
Peer name must not contain dots and colons, otherwise swanct can't generate correct configuration for swanctl.conf This is used in connection names and child SA names Add filter 'dot_colon_to_dash' which replace dots and colons
2021-11-18dmvpn: T4010: Fix template ipsec profile rekey_timeViacheslav
2021-09-19ipsec: T1441: Clean up vti-up-down script for XFRM interfacesLucas Christian
2021-09-18ipsec: vti: T3831: avoid usinf xfrm if_id 0 - implement shift by oneChristian Poessinger
The key defaults to 0 and will match any policies which similarly do not have a lookup key configuration. This means that a vti0 named interface will pull in all traffic and others will stop working. Thus we simply shift the key by one to also support a vti0 interface.
2021-09-15ipsec: T3830: "authentication id|use-x509-id" are mutually exclusiveChristian Poessinger
Manually set peer id and use-x509-id are mutually exclusive!
2021-09-15ipsec: T3830: set connections.<conn>.remote<suffix>.id to "peer" if undefinedChristian Poessinger
Restore "default" behavior from ipsec.conf
2021-09-13ipsec: T3828: Use IKE dh-group when ESP dh-group is set to `enable`sarthurdev
2021-08-27ipsec: T1210: Jinj2 template did not honor inactivity/timeout settingChristian Poessinger
2021-08-20ipsec: T1210: add missing if clause around unique keyChristian Poessinger
2021-08-19ipsec: dmvpn: T3764: bugfix mixed up IKE/ESP lifetime variableChristian Poessinger
IKE lifetime is life_time, and ESP lifetime is rekey_time.
2021-08-19ipsec: T3764: add additional quantifier for IKE and ESP lifetimeChristian Poessinger
Commit 7a873eb6 ("ipsec: T3764: bugfix missing IKE and ESP lifetime values") re-added the lost in translation IKE/ESP rekey values. But it did not specify the unit, which is s(econd).
2021-08-19ipsec: T3764: bugfix missing IKE and ESP lifetime valuesChristian Poessinger
During the migration the IKE and ESP key/re-key lifetime settings got lost in translation. This is now fixed and the values/defaults correspond to VyOS 1.3.
2021-08-10ipsec: T3727: Fix ESP proposals not being set from tunnel esp-groupsarthurdev
2021-07-29ipsec: T1210: add op-mode command to print Windows connection profileChristian Poessinger
2021-07-27ipsec: T3705: bugfix for VTI interfaces no honoring default-esp-groupChristian Poessinger
2021-07-26ipsec: T1210: extend support for iOS profile generationChristian Poessinger
$ generate ipsec mac-ios-profile <connection> remote <ip>
2021-07-25ipsec: T1210: add RADIUS authentication for remote-access IKEv2 VPNChristian Poessinger
set vpn ipsec remote-access connection rw authentication client-mode 'eap-radius' set vpn ipsec remote-access connection rw authentication id '192.0.2.1' set vpn ipsec remote-access connection rw authentication server-mode 'x509' set vpn ipsec remote-access connection rw authentication x509 ca-certificate 'CAcert_Class_3_Root' set vpn ipsec remote-access connection rw authentication x509 certificate 'vyos' set vpn ipsec remote-access connection rw esp-group 'ESP-RW' set vpn ipsec remote-access connection rw ike-group 'IKE-RW' set vpn ipsec remote-access connection rw local-address '192.0.2.1' set vpn ipsec remote-access connection rw pool 'ra-rw-ipv4' set vpn ipsec remote-access connection rw unique 'never' set vpn ipsec remote-access pool ra-rw-ipv4 name-server '192.0.2.2' set vpn ipsec remote-access pool ra-rw-ipv4 prefix '192.168.22.0/24' set vpn ipsec remote-access radius nas-identifier 'fooo' set vpn ipsec remote-access radius server 172.16.100.10 key 'secret'
2021-07-25ipsec: T1210: move DHCP server configuration unter remote-access nodeChristian Poessinger
As this is only related to remote-access, keeping it under "options" simply feels wrong.
2021-07-20ipsec: T1210: create uuid from empty string in ios profileChristian Poessinger
2021-07-20ipsec: T1210: add op-mode command for macOS and iOS profile generationChristian Poessinger
generate ipsec mac-ios-profile <connection> remote <ip|fqdn> will generate a matching IPSec profile which can be loaded on an iOS device.
2021-07-19ipsec: T1210: add "unique" option to specify how to handle multiple connectionsChristian Poessinger
Connection uniqueness policy to enforce. To avoid multiple connections from the same user, a uniqueness policy can be enforced. * never: never enforce such a policy, even if a peer included INITIAL_CONTACT notification * keep: reject new connection attempts if the same user already has an active connection * replace: delete any existing connection if a new one for the same user gets established To compare connections for uniqueness, the remote IKE identity is used. If EAP or XAuth authentication is involved, the EAP-Identity or XAuth username is used to enforce the uniqueness policy instead.
2021-07-19ipsec: T1210: split out pool from remote-access configurationChristian Poessinger
Remote access IP pools can now be defined at a global level and referenced in IPSec remote-access connections. To defined a pool use: set vpn ipsec remote-access pool global-ipv4 name-server '172.16.1.1' set vpn ipsec remote-access pool global-ipv4 prefix '192.168.0.0/24' set vpn ipsec remote-access pool global-ipv6 name-server '2001:db8::1' set vpn ipsec remote-access pool global-ipv6 prefix '2001:db8:1000::/64' A connection can then reference the pool: set vpn ipsec remote-access connection foo pool 'global-ipv4' set vpn ipsec remote-access connection foo pool 'global-ipv6'
2021-07-18ipsec: T1210: remote-access pools can not hold both IPv4 and IPv6 prefixesChristian Poessinger
... this enables a dual-stack IKEv2 VPN deployment.
2021-07-17ipsec: T2816: migrate "ipsec interfaces" to "interface"Christian Poessinger
2021-07-15pki: ipsec: l2tp: T2816: T3642: Move IPSec/L2TP code into vpn_ipsec.py and ↵sarthurdev
update to use PKI.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 00:16:04 +0000