summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2024-03-11snmp: T2998: SNMP v3 oid "exclude" option fixNataliia Solomko
2024-03-07conntrack-sync: T6057: Add ability to disable syslog for conntrackdNataliia Solomko
2024-02-07T5586: Improve systemd keepalived override fileViacheslav Hletenko
2024-02-01bfd: T5967: add minimum-ttl optionChristian Breunig
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254> (partially cherry-picked from 1f07dcbddfcfdbb9079936ec479c5633934dd547)
2024-01-09T1297: vrrp: backport VRRP GARP options to EquuleusNicolas Fort
2023-12-15 T5796:add command http-security-headersfett0
2023-12-04 T5796:add/fixed OCSERV HTTP security headersfett0
2023-10-31Merge pull request #2310 from sever-sever/T5586-eqDaniil Baturin
T5586: Disable by default SNMP for Keeplived VRRP service
2023-10-08Merge pull request #2333 from sever-sever/T5213-eq1.3.4Daniil Baturin
T5213: Add accounting-interim-interval option for PPPoE-server
2023-10-08pppoe: T5630: allow to specify MRU in addition to already configurable MTUChristian Breunig
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send packets of no more than n bytes. The value of n must be between 128 and 16384, the default was always 1492 to match PPPoE MTU. A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256 bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280. CLI: set interfaces pppoe pppoe0 mru 1280 (cherry picked from commit e062a8c11856f213983f5b41f50d4f9dbc0dde0f)
2023-10-03T5213: Add accounting-interim-interval option for PPPoE-serverViacheslav Hletenko
Add accounting-interim-interval option for PPPoE-server set service pppoe-server authentication radius accounting-interim-interval '60'
2023-09-26T5586: Disable by default SNMP for Keeplived VRRP serviceViacheslav Hletenko
AgentX does not work stable. From time to time we see the system service crashing/degrading if something is wrong with SNMP from util net-snmp. We should disable it by default and enable it only if configured. set high-availability vrrp snmp
2023-09-04T5545: fix sflow configurationMaxime.L
2023-08-28T5428: fix DHCP address renewal/release when running in VRFChristian Breunig
2023-08-31Merge pull request #2181 from sever-sever/T738-eqChristian Breunig
T738: add CLI option for PowerDNS local-port
2023-08-29T738: add CLI option for PowerDNS local-portViacheslav Hletenko
set service dns forwarding allow-from '192.0.2.0/24' set service dns forwarding listen-address '192.0.2.11' set service dns forwarding port '5353'
2023-08-25T3546: PPPoE-server add extended scripts for RADIUS attributesViacheslav Hletenko
Ability to get and parse RADIUS attributes via a shell script and then execute commands Ane of the usecases is to create a custom shaper with some smart Extended scripts receive from PPPoE daemon the following variables: $1 - Interface name $4 - Tunnel GW IP address $5 - Delegated IP address to the client $6 - Calling Station ID (MAC) if [ -f /run/accel-pppd/radattr.$1 ]; then true fi
2023-07-19sshguard: T5354: Add service ssh dynamic-protectionViacheslav Hletenko
Sshguard protects hosts from brute-force attacks It can inspect logs and block "bad" addresses by threshold Auto-generates own tables and rules for nftables, so they are not intercept with VyOS firewall rules. When service stops, all generated tables are deleted. set service ssh dynamic-protection set service ssh dynamic-protection allow-from '192.0.2.1' set service ssh dynamic-protection block-time '120' set service ssh dynamic-protection detect-time '1800' set service ssh dynamic-protection threshold '30'
2023-06-26vrrp: T5315: add support to explicitly specify versionChristian Breunig
set high-availability vrrp group <name> version 2|3 (cherry picked from commit 6ca308182a7891e600a2e8749f7b12b566005576)
2023-05-11syslog: T2769: add VRF supportChristian Breunig
Allow syslog messages to be sent through a VRF (e.g. management). (cherry picked from commit 46d2bcdb0b500b4d1b9d973ab5b9ca3c6cf44e51)
2023-05-04cloud-init: T5190: Added Cloud-init pre-configuratorzsdc
Added a new service that starts before Cloud-init, waits for all network interfaces initialization, and if requested by config, checks which interfaces can get configuration via DHCP server and creates a corresponding Cloud-init network configuration. This protects from two situations: * when Cloud-init tries to get meta-data via eth0 (default and fallback variant for any data source which depends on network), but the real network is connected to another interface * when Cloud-init starts simultaneously with udev and initializes the first interface to get meta-data before it is renamed to eth0 by udev
2023-04-13Merge pull request #1952 from sever-sever/T4727Christian Breunig
T4727: Add RADIUS rate-limit attribute for vpn pptp
2023-04-13Merge pull request #1954 from sever-sever/T5152-eqChristian Breunig
T5152: Get default hostname for telegraf from FQDN or hostname
2023-04-12T5152: Get default hostname for telegraf from FQDN or hostnameViacheslav Hletenko
Fix for Telegraf agent hostname isn't qualified Try to get the hostname from FQDN and then from the hostname Used for metrics You may have more than one machine with different domain names r1 domain-name foo.local, hostname myhost r2 domain-name bar.local, hostname myhost It helps to detect from which exactly host we get metrics for InfluxDB2
2023-04-12 T4939: fixed template VRRP startup delayfett0
2023-04-11T4727: Add RADIUS rate-limit attribute for vpn pptpViacheslav Hletenko
Add rate-limit attribute, multiplier, vendor specific attribute for the [shaper] section
2023-04-11 T4939: backport VRRP startup delayfett0
2023-04-01container: T4959: add registry authentication optionChristian Breunig
Container registry CLI node changed from leafNode to tagNode with the same defaults. In addition we can now configure an authentication option per registry. (cherry picked from commit fe82d86d3e87cb8d92ebc9d0652c08e3dd79a12c)
2023-03-12T5057: Fix IPoE regex Jinja2 for interfaceViacheslav Hletenko
Fix incorrect regex '\d+' when used vlan ranges For example 'ipoe-server interface eth1 vlan 2000-3000' - replace 'interface=re:eth1\.\d+' => 'interface=re:^eth1\.(200\d|20[1-9]\d|2[1-9]\d{2}|3000)$'
2023-02-13Merge pull request #1813 from sever-sever/T4971-eqChristian Breunig
T4971: PPPoE server add named ip pool and attr Framed-Pool
2023-02-13Merge pull request #1812 from sever-sever/T1993-eqDaniil Baturin
T1993: PPPoE-server add section shaper and fwmark option
2023-02-12T5001: Replace links to the phabricator siteChristian Breunig
Replace links to the phabricator site from https://phabricator.vyos.net to https://vyos.dev (cherry-picked form commit bd9416a6aa9d5d0a746dc2cebc8d0330fd27d1a2)
2023-02-12T4971: PPPoE server add named ip pool and attr Framed-PoolViacheslav Hletenko
Add a new feature to allow to use named pools Also it can be used with RADIUS attribute 'Framed-Pool' set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2023-02-12T1993: PPPoE-server add section shaper and fwmark optionViacheslav Hletenko
Extended PPPoE-server rate-limiter to avoid shaping marked resources Often this feature needs for ISP, which provides access to some IX or its resources. set service pppoe-server shaper fwmark '223'
2023-02-08T2603: PPPoE-server change default min-mtu value 1280 for EquuleusViacheslav Hletenko
Minimum acceptable MTU. If client will try to negotiate less then specified MTU then it will be NAKed or disconnected if rejects greater MTU. Change 'min-mtu' from 1492 to 1280 for 1.3.3
2023-01-23pppoe: T4948: add CLI option to allow definition of host-uniq flagChristian Breunig
Some ISPs seem to use the host-uniq flag to authenticate client equipment. Add CLI option in VyOS to allow specification of the host-uniq flag. set interfaces pppoe pppoeN host-uniq <value> (cherry-picked from commit 38bab79324087df5a9057c23b85a0a784c09540a)
2023-01-15Merge pull request #1670 from vfreex/dhcp-v6-only-option-1.3Christian Breunig
[1.3] T4832: dhcp: Add dhcp option to signal IPv6-only support (RFC 8925)
2023-01-08ssh: T4922: add source-interface support ssh-clientChristian Poessinger
(cherry picked from commit 87cc636bd2baf576a2a5ece7a4f8318eb4f69c2e)
2022-12-30container: T578: backport podman from 1.4 development branchChristian Poessinger
2022-12-26Merge pull request #1717 from roedie/1.3-T4809Christian Poessinger
T4809: radvd: (Backport) Allow the use of AdvRASrcAddress
2022-12-26radvd: T4809: fix AdvRASrcAddress missing semicolonChristian Poessinger
Commit 13071a4a ("T4809: radvd: Allow the use of AdvRASrcAddress") added a new feature to set the RA source-address. Unfortunately it missed a semicolon. (cherry picked from commit 4e61fb1f0fd075c5b1a67165204e13f88a7d3015)
2022-12-22T3810: Fixed all issues in T3810aapostoliuk
1. Added in script update webproxy blacklists generation of all DBs 2. Fixed: if the blacklist category does not have generated db, the template generates an empty dest category in squidGuard.conf and a Warning message. 3. Added template generation for local's categories in the rule section. 4. Changed syntax in the generation dest section for blacklist's categories 5. Fixed generation dest local sections in squidGuard.conf 6. Fixed bug in syntax. The word 'allow' changed to the word 'any' in acl squidGuard.conf 7. Backported all changes from 1.4 to 1.3 which were made in T3810 8. Fixed webproxy smoketest
2022-12-17T4809: radvd: Allow the use of AdvRASrcAddressSander Klein
This add the AdvRASrcAddress configuration option to configure a source address for the router advertisements. The source address still must be configured on the system. This is useful for VRRP setups where you want fe80::1 on the VRRP interface for cleaner VRRP failovers.
2022-11-21T4832: dhcp: Add dhcp option to signal IPv6-only supportYuxiang Zhu
Clients supporting this DHCP option (DHCP option 108, per RFC 8925) will disable its IPv4 network stack for configured number of seconds and operate in IPv6-only mode. Example clients supporting this option including iOS 15+ and macOS 12.0.1+.
2022-11-15backport: T4815: Fix various name server config issuesYuxiang Zhu
This is a backport of https://github.com/vyos/vyos-1x/pull/1656. Note I also changed `ip-down.script.tmpl` to not wait for `systemctl stop dhcp6c@$iface.service`, because that command is slow and pppd will kill the ip-down script if it times out. I didn't see `ip-down.script.tmpl` or its equivalent in the 1.4 branch. Not sure if there is another mechanism to handle that functionality or it is missed.
2022-10-15Merge pull request #1579 from sever-sever/T4743Viacheslav Hletenko
ddclient: T4743: Add option for IPv6 Dynamic DNS
2022-10-12Merge pull request #1582 from sever-sever/T4730-eqViacheslav Hletenko
conntrack-sync: T4730: Fix listen-address jinja2 template
2022-10-11monitoring: T4680: Bracketize prometheus listen-addressViacheslav Hletenko
Fix correct format for prometheus listen-address when we use IPv6 address, we must use square 'brackets' http://[2001:db8::11e]:9273
2022-10-11conntrack-sync: T4730: Fix listen-address jinja2 templateViacheslav Hletenko
Listen address has option 'multi' As result we have an incorrect template value for listen-address - conntrack-sync listen-address '192.0.2.11' in template It looks like "IPv4_address ['192.0.2.11']" in the conntrackd.conf but the correct string expected without brackets Fix it
2022-10-10ddclient: T4743: Add option for IPv6 Dynamic DNSViacheslav Hletenko
Allow to set IPv6 address for Dynamic DNS set service dns dynamic interface eth2 ipv6-enable
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 10:41:32 +0000